Universal Cable Holder
V2 ( screw mount ) https://www.printables.com/model/1160799-universal-cable-holder-v2 Tested with Petg
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
- Pobrania
- 33 967
- Polubienia
- 6936
- Ocena
- 4,93
14 211 modeli
V2 ( screw mount ) https://www.printables.com/model/1160799-universal-cable-holder-v2 Tested with Petg
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Tested with Petg V2: Added a wider base for extra holes and a better tape adhesion
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Larger sizes: https://www.printables.com/model/1200632-universal-bag-clips-xl
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
This Garden Tool Hook is designed to neatly hang garden tools such as brooms, spades, and rakes in your shed or garage. It is made to fit tool handles with a diameter of up to 35 mm , making it suitable for most standard broomsticks and…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Tested in PETG
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The AMF files of the buildplates are included. The…
Wydruk około 10,28 €–12,56 € nettoWstępna wycena jednego wariantu
After my Simple Universal Phone Stand that got featured I got a new phone. So I made a phone holder version 2 for bigger phones and other improvements. You can print it on the side as shown in the picture. NOTE: If your phone is to big…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
Wydruk około 8,05 €–9,84 € nettoWstępna wycena jednego wariantu
! After printing, remove the small supports on the hinge ! please use my gcode files for printing :)
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis Cable Holder, perfect for chargers and other :)
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
This version is for UniFi AP AC Pro model, other models may not be suitable. Print it to replace broken bases with PETG or ABS for rigidity, PLA is also recommended ,i added file without holes so it can be edited to your liking Update…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
Simple stand originally designed for a Ubiquiti UniFi AP AC Pro Also confirmed to work with: UniFi Access Point WiFi 6 Pro U6-LR-US Possibly others? If it works on other models drop a comment and let me know! Snap fits into existing holes…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A universal adapter to hold a Parkside PAP 20 A1 (Lidl) battery. You can add holes in Prusaslicer 2.4+ or in any other software to connect it to the machine. No supports needed. Feel free to tell me for improvements.
Wydruk około 2,88 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Key cover with customizable text that uses inserts to work with almost any key . Wall-mounted holder for 4 keys keeps all your keys together. Now includes INSERTs for Schlage (SC1, SC4, SC9), Kwikset (KW1), and Hudson keys as well as a “…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…
Wydruk około 0,81 €–1,00 € nettoWstępna wycena jednego wariantu
Being high maintenance, the Alicorn requires supports, especially for her delicate wings. New poses will be captured, when time can be frozen and stored (hopefully soon.) The correct term for this majestic creature is Alicorn, although,…
Wydruk około 6,41 €–7,83 € nettoWstępna wycena jednego wariantu
A communication badge from Star Trek Voyager. This a quick and easy print! The size and shape of this badge should be pretty close to the original TV version. Print instructions Should print in just about any material
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Advised to print the small one first :)
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Level up your GraviTrax Junior fun with this compatible 3D-printed spacer! It's a nifty add-on for creating epic marble runs. Just pop it in and let the marbles roll! Will require supports and some minor cleanup work. Disclaimer: Only…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
UPDATE: now also includes tunnel with a slope With this model, you can print a tunnel compatible with the GraviTrax Junior and extend your marble run building options. This model can be printed without any support and assembled without…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a reupload from https://www.thingiverse.com/thing:5572539 which is itself a reupload from a different website. Credit to thatguy_ie on Thingiverse and Crosstalk Solutions on youtube for bringing it to my attention originally.…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
This is a part of the cabin design of my Unimog RC project . I'm providing the 1/10 print files but also the 1/5 in case you want to use it outside the design. I'm using height range in the print files in order to get the top part as nice…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Blue Grey Econofill PLA Print in whatever you like! Tolerances are are tight be sure your printer is tuned.
Wydruk około 3,57 €–4,36 € nettoWstępna wycena jednego wariantu
Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
This is the grill for my Unimog RC project ; the chassis is here and you can also browse my other models to find other UNIMOG accessories. Mounting is pretty straightforward; glue the black backgrounds (round one for the Mercedes star)…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Universal holder for Smartphone with popsocket. Fits all standard PopSockets. There are four ways of mounting with cable ties through the special cable tie holes with a screw - diameter 3mm suggested with double sided tape with clip for…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
A clutch lever that should fit on most dirt bikes, and maybe other motorcycles (I have not tested anything besides off-road style bikes), you may need to adjust the clutch cable. Also supports are needed for printing the bit where the…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
This is Universal ornament hanger. It consists of two parts - cap and hook (hanger?). Cap is designed to be printed in spiral/vase mode. Original file is pretty small with internal diameter of 7mm or so (depends on extruded line width)…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…
Wydruk około 9,15 €–11,19 € nettoWstępna wycena jednego wariantu
Transform GraviTrax Junior with this compatible 3D-printed corner piece! Take marbles on a thrilling ride with twists and turns. Also contains a hole so you can add your favorite accessories. Will need some support and a little bit of…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Das ist ein Case für die Montage einer Ubiquiti UniFi IN-WALL - UAP-AC-IW Damit kann die UAP-AC-IW einfach an die Wand geschraubt werden und das Netzwerk Kabel nach unten herausgelegt werden. Habe für die Montage wieder M3 Gewindeeinsatz…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
Unifi G4 Doorbell Pro Habe hier ein Halter für die G4 Doorbell Pro erstellt um die alten Schraublöcher zu verstecken. Am besten mit PETG/ABS/ASA drucken um die Haltbarkeit zu gewährleisten Viel Spaß damit
Wydruk około 4,14 €–5,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
---------------------------------------------------------------------------------------- CHECK OUT THE NEW & BETTER VERSION IN THE REMIXES! NEUE & VERBESSERTE VERSION IN DEN REMIXES ONLINE!…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you a Prusa 3D community member and proud to show it to everyone? When you are sitting in traffic, make sure everyone knows you are going home to the best printer out there with this Prusa 3D license plate holder. Sized for US license…
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
The summary says it all… Mount with 2 screws (use the holes closest to the bumper). This goes with my UNIMOG RC Chassis .
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
A stand for an Accesspoint 6 pro from unifi. The lan cable can be routed through the bracket. The aim was to place the AC point on a high shelf. It is printed in 2 parts and glued together with a sleeve.
Wydruk około 12,39 €–15,15 € nettoWstępna wycena jednego wariantu
31/12/24: Adding the exhaust pipe. This goes with my UNIMOG RC Chassis . For the exhaust you need to remove the battery shelf and then screw x2 from inside the chassis. The Ad-blue tank includes the bracket for the steps and has also 2…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
Bontrager Blendr Universal Light Mount Model W574066 Support: YES Material: PETG, ASA etc.
Wydruk około 1,01 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall bracket for Unifi Flex Mini.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Simson Tuning Lüfterrad für alle Modelle mit einem zwangsgekühlten Motor. Mit einer neuen VAPE Zündanlage. Wichtig! Das Modell passt nur auf das Polrad der VAPE Zündung, nicht auf die Originale Unterbrecher Schwungscheibe! Die Druckdatei…
Wydruk około 5,36 €–6,56 € nettoWstępna wycena jednego wariantu
Made the tabs much stronger and made a few small improvements overall to the model. Tabs should not break off! Galaxy Black Prusament! Print in whatever you like! PLA
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
Universal Can Lid A universal lid for cans of all sizes – 250ml, 330ml, and 500ml. Printed according to the parameters shown in the attached image. Modified/remixed from the original model – https://www.thingiverse.com/thing:6973930/files…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
I was looking for a decent G3 instant corner mount that allowed me to hide the power cable. I really liked the design of Tadufeu but it lacked the feature to hide my cables so I created a remix for this purpose. Don't mind the finish off…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
After giving up trying to find a mounting system that will work for my pistol I decided to jump into fusion 360 and use this opportunity to re-learn CAD and I think it came out fine for a function over form kinda system but maybe in the…
Wydruk około 6,61 €–8,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple 3D printable sign of the University of North Carolina logo
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
Support and Feedback: If you like the design, you can buy me a coffee here: https://www.buymeacoffee.com/kazikg Encountered any issues or have suggestions? Feel free to leave a comment below. I'm here to assist and continuously improve…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Mit diesem Werkzeug kann die Brüheinheit des Siemens EQ 9 Kaffeevollautomaten bewegt werden, was die Reinigung und Wartung vereinfacht. Es ist keine Unterstützung nötig. Google translator With this tool, the brewing unit of the Siemens EQ…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
13 different sized radius templates. This is used for creating radiuses from 0-3 inches using a trim router on wood, aluminum or plastics. The template gets traced with a trim router and tracing bit as shown in the pictures. I attached 2…
Wydruk około 6,85 €–8,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The 3D Coral Lamp is a unique and versatile piece, perfect for adding charm and innovation to any space. Inspired by the beauty of corals, it is designed to be 3D printed without the need for supports, ensuring an easy manufacturing…
Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu
Created a stand for these commonly available round hygrometers. Found some models online which I liked, but had design flaws, sadly wasn't able to mod them due to bad modeling techniques in the base model - So I created my own. .f3d and…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
Wydruk około 7,83 €–9,57 € nettoWstępna wycena jednego wariantu
After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I painted the model for printing in multicolor using Prusaslicer for the MK4S MMU3. I'm uploading the .GCODE to print just one piece, but the .3MF is the painted project. You can add multiples there or other configurations. Add organic…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
OnShape model: https://cad.onshape.com/documents/e575f295105d8e9e32a6bc56/w/313938088c26a895e167df17/e/4262aab72ff56fb5d56f9058
Wydruk około 2,76 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed this for my setup. Changed the shape for my gyroscope and added some Zip Tie mounting spots. Should be able to zip tie most web cams and cables to this mount. Added a higher angle mount also. The lower angle is good for across…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
If you want to put your Unifi Bullet G5 on a table or shelf instead of a wall, this is for you. The print is technically two files, the cone stand model provided here, combined with the ring with the provided elsewhere mount. This is just…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena jednego wariantu
Here is a multicolor 3d printing technique using one extruder without an AMS on an Ender-3 printer using PrusaSlicer. I'm including the 3mf file along with the STEP and GCODE file as well. Although this is done automatically by having an…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
To hang a board onto the wall, you have to pre-drill a 6mm deep hole with a 30mm forstnerbit and screw the mount into your board.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A cylindrical air pruning pot for…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
This is a remix. Look at Devin Ho's incredible work to see instructions. I scaled the entire thing to 50% and united the 3 separate parts of the lid, the base and the slider each. So less glueing is needed. Thinner layer height than 0,2mm…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Cursed Unicorn – The Shadowhorn Model of the Cursed Unicorn Skull with Stand Collection: Fantastic Skull Collection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Yes (Includes three pre-sliced files at…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
Reproduction fidèle de l'emblème du FC Bayern Munich, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 /…
Wydruk około 4,88 €–5,96 € nettoWstępna wycena jednego wariantu
A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
A simple and easy to print container for various items. SOLID model file - print with 0% infill and no top layers or in vase mode. scalable in XYZ - fit your needs. 2 side interlocking with same XY scale. additional variants inbound tight…
Wydruk około 4,96 €–6,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
10in rack mount for the Unifi Gen2 Cloud Key, with RJ45 keystone jack on faceplate, with a retention post, and centering bars on the back of the mount face. Print face down with snug supports everywhere or organic on build plate. I would…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
Model Info | Introduction I want to introduce you to an easy-to-print Bowens Mount Lamp Reflector. I use it printed in PLA with my lamp up to 50% of the maximum wattage, and it doesn't melt or get soft. Save your money as these typically…
Wydruk około 10,17 €–12,43 € nettoWstępna wycena jednego wariantu
Motivation I was considering the best method to mount my G5 PTZ for ~280° of panning FOR under a corner overhang. From the photo you can see I needed to stay as far out of the corner to account for the downspout. None of the UniFi mounts…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Für meine aktuellen Projekte benötige ich die Schraube für eine Logitech Brio Kamera zur Erstellung einer Säulenbefestigung (Ich mag die Logitech Halterungen überhaupt nicht!). Auch früher hätte ich so eine Schraube öfters benötigt um…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, I have here for you the Unitree G1 EDU U2 Humanoid Robot . You may know it from the Alza battery. It is really fully authentic. Nice for an exhibition. I really like these movie accessories. Good luck with the printing! I used…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
Easy 43-minute print that requires only 5,33g of filament
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Design These are designed to be compatible with the official Kato N gauge diorama kits 28-889 Kato UniTrack Diorama R183 & 28-888 Kato UniTrack Diorama S124 Straight Kit As used in the Kato Dioramacircus. These models offer support for…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
I've designed this “formula inspired” race wheel to fit the larger (70mm diameter) screw pattern on the Fanatec CSL Universal Hub V2, while wrapping around the buttons to provide a comfortable, but customizable steering experience. Neat…
Wydruk około 14,63 €–17,88 € nettoWstępna wycena jednego wariantu
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Drawer Organisers Universal/IKEA ALEX
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
This maze puzzle is a little different from the tube type maze puzzles you may have seen in the past. For my puzzle design you only have to work it in one direction. In the past for these puzzles you have to first figure out how to put…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Paint stand This is my own design from scratch but I would like to first credit @jonnyboy_star_535044 on Printables for inspiration. This is designed to print on a 220x220mm print bed, without supports. I have made the joins quite loose…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Universální dilatační klínek, modelováno pro pokládku laminátové podlahy rozměry: 35 x 53 x 10 mm
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Bosch Siemens Neff Coffee Maker Brewing Unit 11014117 part. When the brewing unit is blocked, this slider thing could fix it. Some pictures attached.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu