7275 modeli
Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
chip clip v3 Category: Household Supplies
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…
Wydruk około 5,15 €–6,30 € nettoWstępna wycena jednego wariantu
⚠ Important: Do not over-tighten the bottle to avoid damaging the print. Use tree supports only on build plate Introducing Drill Dust Collector and Guide V3 —the ultimate tool for keeping your workspace clean while drilling. This upgraded…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
English version follows. Stavebnice modulární pažby pro vzduchovky Artemis (SPA/SMK) CP-2 a CP-1 (též Diana Chaser, Bandit). Oproti originálu nabízí (subjektivně) lepší ergonomii, nastavitelnou a vyměnitelnou pistolovou rukojeť, lícnici a…
Wydruk około 24,96 €–30,51 € nettoWstępna wycena jednego wariantu
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
This is a quick printing Filament Guide, made to bolt under the stock spool holder for the Ender 3 V3 SE/KE using the stock bolts that came with the printer. Now with Gyroscopic action. Printed with PLA @180mm/s, 0.10mm layer height, w/…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Also required: CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
Wydruk około 3,08 €–3,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing instructions PETG works great, but you can use other materials as well. If you happen to have a spool of (pure) nylon sitting around, go for it. Generic settings for 0.4n and 0.2l work great, just increase the number of…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
Uses the original screws to attach the original spool holder to the adapter. Needs two extra M5 (minimum 15mm long) screws for the frame attachment. All holes have a diameter that enables screwing the screws directly, or using a tap…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Updated model for the Knob Guards: Posted a new model. https://www.printables.com/model/923894-tyt-md-uv390-md-390-knob-guards-revised Updated model for the PTT Guard: V1.15 Added to files in this model. I tinkered with the design to make…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
Wydruk około 3,11 €–3,81 € nettoWstępna wycena jednego wariantu
This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
⚠ Note: This is the third version of the ROPI grinder. It introduced reinforced durability, stronger magnet holders, and a brim variant for tricky print beds . If you want the latest and fully refined version with even smoother grinding,…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
You will need 2 screws and 2 t-nuts to fix it to the extrusion! Recommended to print face down , so make sure to orient the part properly before printing!
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
Clamp or screw you webcam on it, clamp it below your front right printer feet. Versions V3.2 13 cm height 1 cm extra bed distance 33 degree smoothed edges V3 12 cm height 45 degree ¼" screw hole Easy to print, no supports, I used 15%…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Building on top of Yankeespitfire 's bed chain , this model directly replaces the black plastic cable holder for the bed with the chain end. Chain pieces can get directly attached to this piece. This model only includes the replacement…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena jednego wariantu
Just a simple collar that is redesigned from the previous model. Version 1 of the redesign is meant to be printed in TPU and it slides overtop the knobs. It is crude but works. Version 3.5 is a bit more detailed. It was meant to be…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Square Sorting Tray v3 & v4 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
V3A-93 tram model. Printable as a single piece with supports only needed for the floor. Can be printed either entirely or each wagon separately and then glued together. The model is partially accurate as I've used pictures as reference…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…
Wydruk około 14,82 €–18,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Horizontally standing, stackable color dropper bottle rack for 14 (two rows of seven) Vallejo, Army Painter, … colors, primers, washes… It is designed to use space as efficient as possible, so that we can get more paints. 😉 The shroud was…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
I recommend printing the Base with 100% infill for more weight. Perfect as a Phone Holder in your Workshop, Kitchen, Bathroom or Bedside Table.
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Wall mount shelf that fits a cable modem "Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU" The supports below the shelf doubles as convenient points to tie the cables to. The hexagonal holes in the shelf are for ventilation, as the modem has…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu
For mounting the hotend on an MGN12C linear rail on the X-axis Creality Ender 3 V3 se Zur Montage des Hotends auf einer MGN12C Linearschiene auf der X-achse Creality Ender 3 V3 se
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
In the pursuit of the “perfect” mount, I printed a series of mounts that where not very good or fragile. I decided to make my own so I could shut this hunger of mine. Made one based off two models I found and added some structures to aid…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
This spool unit prevent the fly line from coiling after fishing. It is easy to change line.
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
V-Mount Plate Aviwest Air 320 V3. With this adaptor you may use the Air 320 in a v-mount. The small square is just to give the plate some suport.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
This is a attachment that turns your ender 3 v3 se/ke into a pen plotter. It clips on to the side of the extruder and requires no disassembly of the printer toolhead. It's fairly rigid and can plot fine details (e.g. printed text) with a…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This is a stylish, 3D-printed decorative cover designed specifically for the extruder stepper motor of the Ender 3 V3 SE equipped with a silver motor. The model features a bold design with customizable front panel accents, like the red…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Decided i needed a storage bin for my printer, Clips onto the side rail of the printer and sits on the desk/table top so hopefully won't break under any weight. Will upload a better pic once i print it out.
Wydruk około 50,49 €–61,71 € nettoWstępna wycena jednego wariantu
Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature G28 ;Home all axes G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up M104 S[nozzle_temperature_initial_layer]…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
NO SUPPORTS NEEDED A little screen mount for ender 3 v3 se, best if you have limited space (like me) or this would just seem more comfortable. Personally used it since I printed it, it wobbles slightly but doesn't bother me(if any one…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
Das vorliegende 3D-Modell wurde speziell für die optimierte Montage der Beleuchtungseinheiten des VPM-Moduls NRW ( Verpflegungsmodule NRW ) entwickelt. Es wurde auf Grundlage der Anforderungen der Einsatzkräfte des Deutschen Roten Kreuzes…
Wydruk około 3,45 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple remix of Jerrari's Wyze Cam V3 Enclosure Mount that adds a solid lip to hold the camera base. The original has plenty of hold with just the magnetic force from the camera base and washer. However, I have bumped the camera…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Super simple print - 1mm thick boxes that fit nicely in the crate your EV3 set came in. Print 4 of the "corner boxes" and 2 of the "middle boxes" and you'll have a set that looks like the ones in the pictures. They are tall enough to hold…
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
This is a Lamp mount for the Bugasalt V3 It clips on the on the mounting porint on top of the gun the lamp is also just slided in. the Diamater for the lamp is 23,5mm. so it should fit all lamps that are slightly bigger then the diameter.…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
A simple case and plate for the KBDFans KBD75 v3 PCB. I had a spare PCB, so I made this. The pins align with the PCB screw holes, so there are no screws needed. The two holes are for pushing the PCB out again. I suggest to print the…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
Shortened the height of the removable bin so that Rui's Nebula Cam can still be utilized. Removed the Nebula Cam static mount
Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu
This is v3 of the model, Ultimate Edition. EVEN more ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design promotes air circulation…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This contains only the German version of the Word Clock but with a closed front, but it's adaptable for other languages if you take a look how I stacked the different colours. I used a darker bronze gold (from Redline Filament) for the…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na stěnu pro automatický dávkovač mýdla od Xiaomi.…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
Made the removable bin shorter in length to fit with the Nebula Pad being relocated.
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The lid snaps in, just screws for mounting the electronics required.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Soporte para un termómetro/higrómetro comprado en aliexpres muy barato, se ajusta perfectamente en cualquier parte de la barra superior de la impresora creality ender 3 v3 se. es muy útil y practico y no se queda suelto ni nada, encaja a…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
I put my printers in an enclosure and I am now creating cases for the boards to go on the outside. This is the second case. It is for the SKR Mini E3 v3 board. The lid holds a 40x40 fan, works with Nautica Fans as well. You only need…
Wydruk około 7,49 €–9,15 € nettoWstępna wycena jednego wariantu
Razer Seiren Mini V3 Under-Desk/Shelf Mount I designed this mount to free up desk space for my Razer Seiren Mini V3 microphone. Since I’ve extended the microphone stem, the stand was taking up too much room on my desk, so I created a…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gedruckt in PLA (0,2mm Speed Profil auf einem MK3S) mit 15% Infill. Benötigt eine Verlängerung des Anschlusses von der Mitte des Druckers zur linken Seite. Verbinder zum Teflon-Schlauch ist ein PC4-M10 Pneumatikverbinder (Bohrung 9mm).
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Keeping the basic structure of version 2, the front is closed to improve the appearance and rigidity.
Wydruk około 12,31 €–15,04 € nettoWstępna wycena jednego wariantu
I like to keep my Frixon pens together with my RocketBook since otherwise they get lost easily. I use a standard hole puncher and use it to make a single hole (s.a. picture), the pen clip closes nicely through this hole which gives it…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
support de bobine avec 4 roulements qui facilite la rotation de la bobine de filament et ne freine pas le débit. Imprime en PETG 3 coouches, Remplissage 20% 4 roulements 6X17X6 Type 606 Utilisation de la bague de fixation d origine 4…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 of a Distancering for eVicVTC Mini mod. Prevents wobbling of a 22mm atomizer. Smaller throughhole fitting to atomizer for better centering. V1 see here:
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 3.0 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers 0 - 9) that receives a linear input to cycle the display. This version was designed and prototyped using the Bambu…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
📖 Book Page Holder V3 – Enhanced comfort with a fully movable thumb ring. This upgraded version of the classic book page holder features a fully rotating inner ring for your thumb, allowing maximum comfort and flexibility while reading.…
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
a spine chain cable for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
Drill Dust Collector V3 - Modular 3D Design I'm thrilled to introduce the Drill Dust Collector V3. This tool, entirely designed and 3D-printed, features a 3-in-1 modular design and an eye-catching two-tone aesthetic for superior…
Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…
For people who own this printer, they are familiar with the weak vertical construction. Because of the shaking the printing quality is suffer. So I made this to prevent the problem. After mounting it, the better surface finish was…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
Heat Bed Cable Chain for Ender 3 V3 SE i make it as tight as possible, try to print 1 or 2 piece and if you think its to tight you can scale it bigger Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer…
Use stock 4010 fan and bolts. Both the fan shroud and the air duct can be printed in PLA. Two versions available, with honeycomb or horizontal grill intake. Print settings: Nozzle diameter: 0.4 mm Layer height: 0.1-0.2 mm Infill density:…
I made the walls thicker so it's sturdier and added a sliding lid. Lid has a tolerance of 0.08mm on each side. Printed on my SE and the lid slides perfectly. I recommend printing the box first and then just a section of the lid to make…
With this mod, you can place Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or similar parts. Inverse Version: Simply rotate the camera 180º on its own stand to invert the image, no need to make any adjustments…
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 Profile 👉 My other Slicer Profiles & Models Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 32 minutes…
Since the KE can move quite aggressively and the gantry can be quite wobbly or even tilted . I decided to design a spool holder that attaches straight to the base making the printer a lot more stable and coincidentally quite a bit lower.…
If you're looking for my Bambu print profiles, they're at MW . Voronoi Mobile Phone Stand V3 (No Supports!) A lightweight, stylish phone stand built around a Voronoi lattice pattern that looks great on a desk and prints easily without…
Dust cover for Z axis bearings. Prevention is better than cure.
Update: Stronger, better cable guide, better tolerances
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
