667 modeli
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Wydruk około 3,51 €–4,28 € nettoWstępna wycena jednego wariantu
Since I did not find customizable cable tracks that fit my need, I designed my own. I tried to make it as easy as possible to modify everything using OpenSCAD ! How to customize? Customizing the cable tracks is as easy as it could be.…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
Wydruk około 4,40 €–5,37 € nettoWstępna wycena jednego wariantu
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cette visière est une version dérivée de ce modèle : https://cults3d.com/fr/mod%C3%A8le-3d/divers/shields-anthony-seddiki-covid19 Ce modèle est compatible avec les clips de la shield v16 et les clips de ce modèle sont compatible et…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have a CrossFirePower Milwaukee battery adapter on your Dyson V8 this will let you still use the wall mount that came with your vacuum. I printed mine flat-side down with no supports using Overture PETG in grey. I had to sand the…
Wydruk około 5,35 €–6,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About Found old flexible hose and decided to adapt it to the Dyson V8 (or compatible). This allows you to use Dyson V8 and then attach a hose to it (the direction is important). Then if the hose has a 32mm pipe with a metal pin lock on…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one. https://a.co/d/9Y6o5Eo I had to figure out what threads it used. Weird 23mm x 2mm pitch. I designed 23mm x 2mm pitch threads. Then designed…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
Simple filament clip, works with any 1.75 mm spool. Print instructions Yes. Indeedio. Yet another filament clip lmao... I looked and tested many, almost got so bored of it that wanted to give up. But I simply needed one working desing to…
A design i made a few months ago. Enjoy!
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…
A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…
Here we have a remix of zykovkristian's model of a V8 Business Card holder. I made some changes to make it easier to print (crankshaft alley removed, oil pan bores removed, crankshaft bores reduced, details in the head minimized, map slot…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
A holder to store more than the default two accessories. You have to drill a 4mm hole to the base to mount the holder using a M4 screw and nut. The right arm can be mirrored to have an additional slot. Support my work For non-Prusa parts…
New version 2.0 Printing The crankcase is printed with support on build plate. Print the piston pins with brim. I printed with PLA+, layer height 0.16 mm. Dimensions 70 x 68 x 50 mm. Weight 0.050 kg. Assembly - Build the crankshaft using…
I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed.
This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the Thingiverse Thing, it helps alot! :) There is more info on the design in this video:…
You could print it with 0.4mm nozzle and 0.2mm height You would need 4 m3x4x5 heat inserts Update Added Step and 3mf files
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
-I used M4 screws with lengths of 35-40mm for block connection. -8pcs -to assemble piston connecting rod M3 7-9mm. -16pcs -printed on SUPER DRAFT settings with supports. -The best printing position for the piston connecting rod is…
note, this used to be the thngiverse file for only the V6, but is now combined to the V8 and the V6. This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx The LS3 is a modern classic - big displacement, no nonsense, and built to perform. This 3D printable scale model captures its mechanical soul with moving pistons, a…
V8 engine cooling cans. To assemble the engine you need to use M4 36cm 4 pcs. M4 12mm 2pcs. M4 nuts 10 pcs. It is worth checking all dimensions yourself after printing!! It's best to finally glue everything together
I made this because why not it may be very large scale to what you want 0-100% infill use supports Category: Tools
mettre le vilebrequin a au moins 20% de remplissage
V8 Visitenkartenhalter / Business Cardholder
The holder is made for a light blub socket with the following dimensions: 5.75 cm tall and 4 cm in diameter. And the hole for the wire is roughly 0.6-7 cm in diameter. Print the lampshade in vasemode and the circle has to be on the bottom…
a small nozzle for Dyson V7, V8, V10, V11, V15
Upgrade version 2.0 - Easy assembly of the crankshaft. - Integrated stand. - Turning wheels in stead of cranked handle. Printing The crankcase is printed with support. Print the pistons and piston pins with brim. I printed with PLA+,…
Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…
This is a remix of the spark plug holder by zodlyrob. https://www.thingiverse.com/thing:4910998 The only change was to remove 2 cylinders for a true V8. There is only the main body, the front and rear piston pieces can be downloaded from…
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
A V8 engine is a type of internal combustion engine featuring eight cylinders arranged in a V configuration. Designing a V8 engine in SOLIDWORKS involves several key steps and considerations to accurately model the complex geometry and…
Mounts on the brace on the rear using 2x M3 heat inserts. Offset: X: 0mm, Y: 27.53mm
similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
Took off transmission and added fly wheel. Scaled to 1/10 for back of RC truck.
The parent model is great, but it did not quite fit certain tools that require a larger spacing from the wall. In this remix I remodeled in Fusion360 and added 10 mm depth from the wall to accommodate those pesky tools that wouldn't fit…
As the versions of a.m. shield are quite confusing, I built two versions. One for V3 I believe. The second for V8 of this battery shield. The Lid may fit to both versions The Knob is for V3. V8 may be equipped with it, I will add this…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx Before overhead valves took over, there was the Flathead V8 - raw, simple, and legendary. This 3D printable scale model brings that piece of history to life with moving…
Pro kompatibilitu součástí tisknout vše v měřítku 1:5 a "pístní čep" 1:1, šroubky na spojení ojnice M2x10
This is a slime wand for the Dyson V8 vacuum. The original is great, but it is too thick for vacuuming between my car seats. I am sure you can find other uses too! Print instructions Category: Household Summary This is a slime wand for…
Template This is the base connector section as a print in place version for all newer Dyson vacuum cleaners (for example Dyson V7, V8, etc). Reengineered from the original and tested over several Versions. This is for all of you who do…
Affiliate links for my favorite filaments to help support what I do are here: Linktree The Dyson V8 is a great vacuum but the lack of a trigger lock makes using it for long sessions somewhat painful so I created this trigger lock so you…
This is an adapter for use old Dyson accessories ( i have an old Dyson DC08) with the new Dyson V8. I have printed with PETG at 0.2 mm at 240°C and bed at 85°C. I used a Slic3r PE. Feel free to remix but don't use for commercial use.…
V8 Engine block with a large hole where you can view the crankshaft and connecting rods. This also allows you to re-attach the connecting rods after the two halves are pushed together. I printed the whole model at 50% size which was a lot…
Beefed up design upgrade to double the original one :) Print Settings Printer: SK-Go2 Rafts: No Supports: Yes Resolution: 0.2 - 0.6 nozzle Infill: 40% Filament: Amazon PLA PLA Black Notes: Beefed up design upgrade to double the original…
Libre à vous de changer l'orientation des pièces dans votre slicer résolution 0,20 remplissage 17% besoin de support pour les fichiers suivants: caisse, portes, arceau, aileron
**Update 04/07/2024** -Pattern updated to match with the hex orientation on the V0 display and skirts so that if anyone is obsessive as I am, their toolhead and V0 display and skirt hexes will now match up (I just didn't notice in the…
Trigger button for the dyson v8 vacum. i printed it in esun abs+
UPDATE: I bought an Dyson V12 and discovered that they changed the interface. I made a version that fits the newer accessories with the wedged interface, too. The mounts are angled, so all varios Dyson Accessories can be mounted without…
I made this Arca rail bag plate (gamer plate/ cheater plate) for my PRS rifle. I designed it to go with a “AG’s: MINI PLATE PRO PAD” and using a cheap 50mm Arca clamp from Amazon/ebay. I also put holes in the four corners so that you…
Adapter base for full size cordless Dyson vacuums V8 and up. Can be used to design your own adapter for whatever you need it. Designed to print upright in 1 peace with no support. Designed with PETG flexibility in mind. Can't guarantee…
This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is an adapter for the Dyson V7 V8 V10 V11 that would allow you to use…
These engine models were made by Jaxon Kowalenko. I HAVE MADE NO CHANGES TO THE MODELS other than to separate it into 3 files. Please direct ALL praise to the original creator; and if you download my files, PLEASE go give the original…
I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed. It requires/was made to work with: https://www.prusaprinters.org/prints/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter
This remix is intended to be printed and left on the V6 accessory. The V6 accessories snap into place and do not come off that easily. Additionally it does not require two pieces like the original. Made some other changed to clean up and…
Simple deflector on motto guzzi tank (you have to mirror the other side) cc Daník ;)
Wand Tube/Cleaner Head Clip Latch Tab Button – Compatible with Dyson V7, V8, V10, V11, and V15 Vacuum Cleaners Replacement Part : Perfect for replacing a broken or worn-out latch tab button on your Dyson wand or illumination tool.…
Print standing, adjust X/Y scale according to your needs : 100% means a tight fit in a V11. take ABS shrinkage into account (scale X/Y 100.5 to 102%) for a good fit if printing in PLA, 99% makes for an easy fit especially in a V7/8
Its an engine where you can but smoke cones in (reucher kegel) The smoke comes out of the exausts just glue the exaust on to the engine I recommend to put aluminium foil on the top and bottom in the inside where the space is or just you…
Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.
Print instructions: use PETG, ABS, ASA, PC or PA, for durability for ABS, ASA, PC and PA I suggest using a brim as well print with boldge facing up use ‘normal’ supports at 35 degrees Assembly instructions: unscrew the previous V-ball…
3D Model converted from the game, adapted to 1/64 scale and kitted with various parts from here. Includes dog. Will accept hot wheels medium wheels.Print with supports from build plate. The inside of the car have some supports that have…
This is a front splitter for the Tamiya TT02 Audi V8 RC car kit. This part has been designed to install into the existing lower bumper holes with two M3x20 machine screws, however M3x15 will also work without issue. Printed out of PLA or…
This is a remix of albrnick`s clever wall mount for the Dyson Vacuum Cleaner. In this remix I have: 1.Completely redesigned in Fusion with an articulated node design to provide greater flexibility in positioning accessories and reducing…
See https://www.printables.com/model/401588-parametric-6x17-lenscones-for-v6-slide-in-lescones for instruction on use for different lenes. NOT TESTED! Only a update of the CAD files.
This is a mount I made for the Dragon Burner to fit the ProtoXtruder with visually pleasing transitions. The original mount does 've a smaller contact area to the extruder, so I hope this give me a bit more rigidity. But the main focus…
Reverse-engineered this backend filter attachment piece for my Dyson V8 vacuum. More information on my website: https://dragonmountaindesign.com/2023/10/08/dyson-v8-backend-filter-attachment-replacement-part/ Direct link to Onshape model:…
Have created a multipart version of "Corvega V8 USB-Holder" by demolition88. https://www.thingiverse.com/thing:3060893 Since I found the model good but somewhat boring in one color. I worked on the block a little more and made more space…
These parts adapt the [Dragon Burner](https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner) to the [Rook MK1](https://www.printables.com/model/387431-rook-mk1-3d-printer). The parts were specifically designed for [Fabreeko's…
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
Adapter to securely mount the v8 Dragon Burner to the Chaoticlab CNC Tap for Voron 2.4/Trident. The CNC tap is fairly tall compared to the Dragon Burner. You may need a taller extruder to clear it. I'm using a modified Wristwatch G2…
I designed this to use under my fireplace where I can't reach with other nozzles. I know this aren't an ideal design, but it works for me. Use the “up-top adapter” to adjust the angle of the nozzle. There is a small tolerance at the…
This is a remix of the adapter made by @BuildX. In this remix I've made these changes: Cut off the extension tube to reduce the overall height as much as possible. This makes this model immediately ready for designing new attachments. The…
This is a reinforced version of the great Accessory holder by albrnick. I tried 2 times to print and use the original version, but accessories cause a breaking on the support between the two holders after a couple of weeks. So I edited…
Here is a simple hex pattern I put on the Dragon Burner cowl. In the STEP file there is a repaired version of the original cowling which should make creating new designs a little easier. Updated Nov 27, to v8 cowls and added the cat cowls.
Despite the impressive performance of Dyson vacuum cleaners, there is often a lack of dedicated storage for the included nozzles and attachments. My solution is simple, a wall mount that accommodates two of Dyson's nozzles simultaneously.…
[2022-12-01] UPDATE: Version 2 of the model added which has minor adjustments for better fit. The original version 1 had some trouble attaching properly to the vacuum main body due to some dimensions. Spare part for the back side of the…
Haven't tested yet. Created blades to sit at about 60 degree open inside for more realistic look. Added a touch jolleos design to jake of all trades design. The thought is to superglue my designed blades into place. Category: 3D Printer…
Bring raw horsepower to your desk or shelf with this highly detailed V8 engine bust ! This 3D printable model combines the aesthetics of mechanical engineering and sculpture — featuring belts, pipes, fan blades, and classic muscle car…
Shout out to @Bendandsend_757774 for originally designing this MGN12 mount for the Dragon Burner.
Remixed Engine V8 block keychain
Modul pre pouzite BMG extruderu (praveho) (v testovani) Tlac bez nastavenia podpor. Podpory su uz sucastou modulu a treba ich po tlaci oddelit. (pridany aj subor bez pridanych podpor, individualne nastavenie) Modifikacie boli z STL…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A adapter for the Fanttik V8/V10 slim. With this adapter, the supplied air blower nozzels can be used for vacuuming. The specified settings can also be adjusted Layer height: 0.1mm Infill: 15% Ein Adapter für den Fanttik V8/V10 slim, mit…
Upgrading my old CR10 v1 with the new Dragonburner v8 hotend and G2SA extruder. However I noticed a lack of filament sensor options for both, and I have just completed building my ERCF and needed a filament sensor for calibration. I chose…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
![Cable tracks / cable chain - fully customizable - [v8]](https://media.printables.com/media/prints/50178/images/505060_429e1cdb-d101-452d-bc95-4bd2081b1232/cable_tracks_v7-01-thumbnail.png)
![#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>](https://media.printables.com/media/prints/684679/images/5379109_2c2c8704-f14a-47c0-a640-2faee9f8204a_5ae8e719-2a4b-4ff5-a084-a3e50fdbeffe/rl-20231217-006.jpg)
