Wyniki wyszukiwania: victor

Sortowanie

578 modeli

P
PrintablesPeter Farell

Winged Victory of Samothrace

Winged Victory of Samothrace -Added head and arms in my own imagined version of what it would have looked like in its original unbroken form. Historical design considerations considered but not thoroughly studied. Love to hear from some…

Pobrania
513
Polubienia
108
Ocena
0
P
PrintablesKubak

Babylock Victory waste collector

One of my first designs. Guess it could be improved, but it works.

Pobrania
481
Polubienia
26
Ocena
4,83
P
Printablesdv

Victorinox pocket knife sides

Print with your favorite color/filament and customize your victorinox pocket knife! Very simple to install, just remove the old ones and push the new ones in, just a simple pressure fit works well. Victorinox pocket knife dimensions:…

Pobrania
244
Polubienia
53
Ocena
5
P
PrintablesDesmodromic

Victorinox Fibrox Paring Knife Block - Knife Holder

This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized. These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you…

Pobrania
131
Polubienia
15
Ocena
0
P
PrintablesObolski

Box for Victorinox Knife

Suitable for storage or as a gift box. I added a small loop that keeps the box closed. It can also be printed in PLA.

Pobrania
93
Polubienia
14
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Victorinox 58mm Mini

Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880

Pobrania
92
Polubienia
17
Ocena
0
P
PrintablesTurbopstros

Victorinox Swiss Army Knife Hooks for IKEA SKADIS

Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…

Pobrania
69
Polubienia
20
Ocena
5
P
PrintablesPavel Douděra

Queen Victoria Cypher

Personal Cypher of The Queen Victoria. Osobní monogram královny Viktorie.

Pobrania
63
Polubienia
59
Ocena
0
P
PrintablesMireCZek

SAYA NŮŽ VICTORINOX

Saya pro kuchyňský nůž Victorinox opatřena samolepicí magnetickou fólií tloušťky 0,5 mm

Pobrania
51
Polubienia
14
Ocena
0
P
Printablesbenedy

Podtácek Victoria Plzen

Podtácek pod sklenici

Pobrania
49
Polubienia
2
Ocena
0
P
PrintablesAndreas

Schultz and Larsen Victory bolt protector/decocker

Bolt protector and decocker for Schultz & Larsen Victory. Suggest printing in a color that is highly visible, especially in forest or similar areas. Suggest printing in a material that is less brittle. I printed mine in the photo with…

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesExomaker

Toilet Bumper Roca Victoria

Toilet Bumper Roca Victoria Sparte Parte Replacement Printed with Prusa MK4 and Esun PLA+

Pobrania
41
Polubienia
11
Ocena
0
P
PrintablesCalipee

Print-in-Place Container for Victorinox Tomato Knife - UPDATE AVAILABLE

!!PLEASE CHECK THE UPDATED VERSION !! I'd like to take my Victorinox Knife with me when going camping so I designed this storage container to keep it and me save. There are two magnets (≤ 8mm diameter) required for the snapping mechanism.…

Pobrania
39
Polubienia
18
Ocena
0
P
PrintablesLukasQ

Victorinox Swiss Tool Corkscrew Holder

All of you know this situation: you're out in the wild with your 2018 Barolo di Pio Cesare and want to uncork this masterpiece of red wine. You have your Swiss Tool handy but &$§@**!!!! Where is the corkscrew? Must be somewhere in your…

Pobrania
39
Polubienia
5
Ocena
0
P
PrintablesKnowTheBird

Key for Victoria Regina Era Warded Padlock

Key for Victoria Regina Era Warded Padlock #4870 at https://antique-padlocks.com/lever_vr_01.htm

Pobrania
31
Polubienia
15
Ocena
0
P
PrintablesRosti

Catan VP counter / Victory Points

This is a rotary victory point (VP) counter for the Catan board game. Starting value 2 (minimum VP you can have) up to 9 plus a 'star' for the winning 10 value. For use by each individual player. Sized to be smaller than a Catan resource…

Pobrania
18
Polubienia
2
Ocena
0
P
Printablesjduffas

réhausseur Pieds LELIT Victoria PL91T

si la machine est bancale, comme les pieds ne sont pas réglables, cette rondelle de 0,5mm permet de rehausser un pied en la glissant entre le pied et la machine. enlevez le pied, y mettre la rondelle puis remettez le pied.

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesDarthDeezy

Fortnite Victory Crown

Full crown, or split pieces for no-supports printing. Use settings of your choice for your desired filament. For the split_top printing (llama's head), place on build plate so mouth points up, and use max fan for the steep overhang on the…

Pobrania
15 896
Polubienia
948
Ocena
4,88
P
Printablesbrownie2705

Victorian style Picture Frame

This is a Victorian Style Picture Frame, it was made for the PrusaPrinters 3D Contest. I thought about what kind of Frame i would like to print and something came in my mind. This Frame is a very detailed and big print with a lot of…

Pobrania
3068
Polubienia
713
Ocena
4,93
P
PrintablesLorenzo

Victorinox Swiss Army Knife 91 mm scales

Replacement scales for Victorinox Swiss Army knife 91 mm. In the files section there are a few different variants, in particular with and without the slot for the toothpick and tweezers and with and without the Victorinox cross logo; as…

Pobrania
1806
Polubienia
234
Ocena
5
P
PrintablesUliLac

Victorinox Swiss Army Knife Pocket Clip

Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…

Pobrania
1608
Polubienia
173
Ocena
4,92
P
PrintablesShpooople

Baroque / Victorian Picture Frame A5 (210 x 148 mm) (Updated: now with stand)

This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…

Pobrania
1574
Polubienia
335
Ocena
5
P
Printablesrshelvo

fortnite victory crown

its a crown from when you win

Pobrania
1349
Polubienia
121
Ocena
0
P
PrintablesMartin Rigatoni

Victorian-Style Lion Head Knob

The knob was modeled based on some Victorian-style reference pictures I've found online. There's a 65° overhang on the underside. I'd suggest printing with lower layer heights for less drooping. Attach it using an M4 bolt.

Pobrania
1152
Polubienia
309
Ocena
4,91
P
PrintablesHolzerMax

Victorinox Toothpick Replacement 50mm - actually good quality model

As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…

Pobrania
1150
Polubienia
210
Ocena
4,9
P
PrintablesPunkelopment

Victorinox 84mm scales

I had sale this models on Etsy for some time but now it's free!

Pobrania
1147
Polubienia
109
Ocena
4,6
P
PrintablesAles

Victorinox Dual-Knife Sharpener angle holder

This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…

Pobrania
1028
Polubienia
50
Ocena
4,8
P
Printablesdtxtr

Fake Kydex: Folded Universal Sheath for Victorinox Fruit Knife

Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…

Pobrania
907
Polubienia
183
Ocena
4,78
P
Printableslacop

Victorinox small toothpick

Mine snapped in half after many years of use. Here is a simple replacement. Printed in PLA, with 0.05mm layer height. Lifted off the build plate without a brim so I recommend turning that on. PS: I only use this to clean out my phone usb…

Pobrania
869
Polubienia
292
Ocena
4,56
P
PrintablesSablebadger 3D

Victorian Style Shelf Brackets - 4" shelf

My wife likes Victorian things, and we found these awesome faux-Victorian iron shelf brackets in a shop a while back. I needed to make some small shelves for the same area of the living room so I decided to make some smaller brackets in…

Pobrania
867
Polubienia
293
Ocena
5

Goddess of Victory Statue

She involuntarily raises her hands in conquest, exuding dominance over her defeated foes. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…

Pobrania
817
Polubienia
147
Ocena
5
P
PrintablesSalvador Rueda

LUCKY 13 ✌️ victory hand

Another remix of hands because I think it conveys a lot of emotion. The model is far from perfect but it works for me, maybe it's time to start to learn 3D modeling seriously. It's really amazing and funny. Thanks to soozafone for their…

Pobrania
741
Polubienia
276
Ocena
5
P
Printablesblecheimer

Fortnite Victory Royale - 3D Puzzle

Celebrate your latest epic victory with this printed 3D puzzle of the Fortnite Victory Royale sign! This is a tough print. Your printer must be calibrated and you really need to deburr all parts thoroughly after printing. I recommend…

Pobrania
737
Polubienia
160
Ocena
4,5
P
Printablesbunnyology

Hand with Attitude: Victory

This model serves no other purpose other than placing a statement right on your office desk. Works also well as trophy or cup or simply as a gift. Printing Instructions Print without supports- no steep overhangs. However, I recommend…

Pobrania
654
Polubienia
78
Ocena
4,83
P

Gothic Victorian Bookshelf Design

Easy to print 15% Infill No Supports For Commercial License: MonochromeDesignStl | Patreon

Pobrania
644
Polubienia
296
Ocena
0
P
Printablesmoebio

Victorian Country House

Two stores Victorian Country House. I modeled the house as the main project for this amazing course: https://www.domestika.org/es/courses/1544-diseno-e-impresion-3d-de-maquetas-arquitectonicas/course I found the blueprints from a real…

Pobrania
614
Polubienia
159
Ocena
5
P
Printablesblancomamba

Fortnite Victory Crown Croc Charm /Jibbitz

Fortnite Victory Crown Croc Charm /Jibbitz

Pobrania
586
Polubienia
55
Ocena
3,67
P
Printables_Building_Arts_

Nike of Samotrace - Winged Victory of Samothrace 60 cm tall

I've scale the model up to be 60 cm tall, then I mod the base, cut the model in 7 pieces ad lock pin and paint support for each piece.

Pobrania
584
Polubienia
113
Ocena
4,8
P
PrintablesPYC3D.ES

MARIO BROS VICTORY KEYCHAIN

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE MARIO BROS VICTORY KEYCHAIN This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain is…

Pobrania
577
Polubienia
97
Ocena
5
P
PrintablesGeekSculpt3D

Corpse Bride – Victor & Emily

From Tim Burton’s hauntingly beautiful film Corpse Bride , this collectible figurine brings to life the unforgettable duo: Victor and Emily. Victor, nervous and hesitant, stands with his signature timid charm, while Emily, the Corpse…

Pobrania
550
Polubienia
128
Ocena
5
P

Goth Mini Bookshelf Victorian Style Bookshelf Decor

Print standing Tree Supports 15% Infill Have fun :) For Commercial License: https://www.patreon.com/cw/MonochromeDesignDE

Pobrania
496
Polubienia
191
Ocena
0
P
Printables3DCraft

Vecna’s House – Stranger Things Inspired Victorian Mansion

A detailed 3D model inspired by Vecna’s house from the Stranger Things series.

Pobrania
493
Polubienia
44
Ocena
0
P
PrintablesPistonPin

TweezPickVic - keyring container for 45mm Victorinox tweezers + toothpick

The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers

Pobrania
487
Polubienia
95
Ocena
5
P
PrintablesPunkelopment

Victorinox microscrewdriver blank

Victorinox microscrewdriver blank

Pobrania
460
Polubienia
74
Ocena
5
P
PrintablesLowres

Victorinox Knife Scales 58mm Swiss Army

Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools

Pobrania
452
Polubienia
63
Ocena
5
P
Printablesvisualplastik

Victorinox 91mm ruler scale

NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.

Pobrania
448
Polubienia
71
Ocena
4,25
P
PrintablesKellye Pilon

Fish Scales for 91mm Victorinox Deluxe Tinker

Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.

Pobrania
445
Polubienia
95
Ocena
4,8
P
PrintablesWekster

Batman - Steampunk/Victorian edition

If you like this kind of stuff please check my patreon page www.patreon.com/wekster

Pobrania
432
Polubienia
142
Ocena
5
P
Printablesvisualplastik

Victorinox 91mm Precision Bit Holder + Driver Scale

MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…

Pobrania
430
Polubienia
81
Ocena
5
P
PrintablesMiniMakerspace

HO Scale Victorian House

This house is modeled after the last image included the photos section. It is currently modeled in HO scale but could be easily scaled for a different size. Instructions for how to print/assemble this model can be found here:…

Pobrania
428
Polubienia
110
Ocena
5
P
Printablesvisualplastik

Victorinox 91mm Whistle Scales

I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…

Pobrania
428
Polubienia
64
Ocena
5
P
PrintablesPaolo

HMS Victory Cross Section

Over a meter tall model of Nelson's flagship. Easily printable model with few organic supports with layers of 0.1 and 0.15 To make the rigging I used 1.5mm modeling rope and a thinner one for the linkage. To create the upper meshes of the…

Pobrania
418
Polubienia
94
Ocena
0

Victorinox Kitchen/Snack Knife Sheath, Blade Protection

I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…

Pobrania
417
Polubienia
76
Ocena
4,8
P
PrintablesJamie Anderson

Fortnite victory crown sprite

the victory crown sprite

Pobrania
380
Polubienia
14
Ocena
0
P
PrintablesNigel Kroiter

Victorian License Plate

License plate templates for Victoria, Australia. Both standard and slimline plates. Can be downloaded here or edited directly in Tinkercad (link below) I printed in ABS for better weather tolerance, but any filament would work depending…

Pobrania
373
Polubienia
2
Ocena
0
P
PrintablesLeDomme

Victorinox 58 mm Scales

Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…

Pobrania
352
Polubienia
33
Ocena
5
P
Printablesdudedarnell

Jetblack Victory Rocker Feet

A reupload from MakerWorld of this model by Schichtkunst , which itself is a variation of Tennis ball rockers for Wahoo Kickr Core by adze I had success printing on my MK3S with 0.3mm layer height, 0.6 mm nozzle in PLA. I used 3…

Pobrania
351
Polubienia
16
Ocena
0
P
PrintablesOliver Syp

Victorinox SAK 6mm hex bit driver

I made this hex bit driver 6mm (1/4 inch) so I could use my Victorinox SAK as a repair screwdriver. No supports required but you might need a brim. Versions There are two versions one for 91mm like the compact, huntsman and the other one…

Pobrania
351
Polubienia
69
Ocena
4,5
P
PrintablesTech Napa

Victorian-Style Pendant with Skull | Pendantif de style Victorien avec crâne

ENG : This STL file is for a Victorian-style pendant featuring a detailed skull motif. It combines ornate floral patterns and intricate scrollwork, reflecting the era's fascination with mortality and elegance. Designed for 3D printing,…

Pobrania
340
Polubienia
91
Ocena
5
P
PrintablesTimon

91mm Victorinox swiss army knife scale with toothpick/tweezers

Customizable scales for a Victorinox knife with space for toothpick/tweezers

Pobrania
334
Polubienia
44
Ocena
5
P
Printablesthe_algar

Clip-on Baroque Victorian decor for IKEA Rodâlm frame

Transform your IKEA RÖDALM 21x30 cm (8 ¼x11 ¾") frame with this ornate clip-on Baroque/Victorian-style decor! Designed for easy 3D printing and effortless assembly – no glue, no connectors, just clip it on and elevate your frame in…

Pobrania
332
Polubienia
90
Ocena
5
P
PrintablesTom Haynes

Victorinox SwissCard pocket knife case replacement

I broke my SwissCard pocket knife case about every 6 months. The small glued joints near the knife seemed to fail first. This is a FDM printable replacement. I have used it for 2 years now without any failures. After printing you can…

Pobrania
305
Polubienia
44
Ocena
4,5
P
PrintablesFujima

Victorinox pocket clip V1 more ergonomic

Thickened some parts, removed overhang on the side as much as possible to make it more ergonomic. You still need small touchup to remove sharp edges digging into your palm. I recommend using stiff filament for this. I printed with 0.6…

Pobrania
304
Polubienia
35
Ocena
4,8
P
PrintablesJáchym Tiskne

Victorinox tomato knife cover

Print it laying on the site, the printer will bridge “across the blade.” If the blade doesn't go in, check the bridging direction and if needet adjust the angle of bridging in the infil tab (PrusaSlicer). If it still doesn't go in, lower…

Pobrania
300
Polubienia
36
Ocena
5
P
PrintablesJustABiomedEng

Emergency toothpick card - Victorinox inspired

This is a simple credit card sized toothpick collection for emergency use. It fits 11 single toothpick and they are easy removable from the frame. They can be used also in all that difficult situation where you need something thin to…

Pobrania
293
Polubienia
55
Ocena
5
P
PrintablesVger1981

Victorinox Classic 58mm scales

Use a 3,2mm drill bit with a flat tip to clean the holes for a better fit. Scales should snap-on without a glue.

Pobrania
278
Polubienia
49
Ocena
2
P
PrintablesAlaize0013

Victorinox deluxe tinker beltholder

Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !

Pobrania
277
Polubienia
63
Ocena
4,4
P
PrintablesRJ Tan

Victorinox 58mm Scales

Victorinox 58mm scales with slot for pen, tweezer, toothpick and 2 pins/needle. One more slot is available for toothpick based tool.

Pobrania
277
Polubienia
26
Ocena
0
P
PrintablesMFM15

Victorinox/swiss army knife multitool stand

Stand for 91mm swiss army knife multitool.

Pobrania
275
Polubienia
40
Ocena
4,8
P
PrintablesDarMatan

Fortnite Victory Royale

Made on Fusion360 from a picture downloaded from google.

Pobrania
265
Polubienia
53
Ocena
5
P
PrintablesNoX the FoX

AAP 01 Criss Victor (Kriss Vector) conversion kit (With integrated silencer!) WIP

This is my first version of the Criss Victor (Kriss Vector). The main difference between this and the real one is: The placement of the mag, the placement of shooting mechanism and the stock Print Settings Printer Brand: Creality Printer:…

Pobrania
261
Polubienia
62
Ocena
0
P
PrintablesBen Kraas

Victory point

I made this token inspired by the game "Catan" and since I couldn't find a model with a floating star in the middle I decided to make my own. Since I modeled this in Blender and honestly don't know how to make CAD style models in this…

Pobrania
254
Polubienia
50
Ocena
4,8
P
PrintablesShoaib Ejaz

Ford Crown Victoria 1992 – Detailed 3D Printable Car Model (STL)

This is a highly detailed 3D printable model of the 1992 Ford Crown Victoria , a classic full-size American sedan known for its iconic boxy design and legendary durability. The model is designed for 3D printing enthusiasts, collectors,…

Pobrania
251
Polubienia
14
Ocena
5
P
Printablesvisualplastik

Victorinox 91mm Corkscrew Pocket Clip

Simply screw onto corkscrew to attach.

Pobrania
249
Polubienia
29
Ocena
3,5
P
PrintablesPiotr Zazakowny

Victorinox toothpick replacement

Small things tend to disappear occasionally. Same happened to a toothpick in my folded knife. This is quite tight replacement piece I fitted into my knife.

Pobrania
247
Polubienia
52
Ocena
4,75

Keychain Name Mila, Angel, Sindo, Victoria

Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…

Pobrania
243
Polubienia
25
Ocena
0
P
PrintablesReProps

Victor's Gear From Arcane S2

Probably not the most accurate but not bad from being modeled from a blurred photo. I swear next ep we'll have a good closeup of it and I'll have to remodel it. I'd print it periductular to the build plate or split in half hamburger style…

Pobrania
241
Polubienia
54
Ocena
5

Victor - Interlocking puzzle by Stewart Coffin (STC #201)

Victor Interlocking puzzle by Stewart Coffin (STC #201) Assemble the six pieces into the polyhedral shape shown in the photo. Victor is a polyhedral puzzle descended from earlier Coffin designs such as Star of David , Rosebud , and…

Pobrania
237
Polubienia
33
Ocena
5
P
Printablesbobmagoo

Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife

Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…

Pobrania
227
Polubienia
17
Ocena
5
P
PrintablesLeopoldo

Sharpening guide for Victorinox diamond sharpener

Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.

Pobrania
227
Polubienia
25
Ocena
0
P
PrintablesLZ1FLY

Victory Motorcycles Emblem

Scale it up because it has small letters and 0.4 nozzle will struggle.

Pobrania
224
Polubienia
15
Ocena
5
P
Printablesjs500

Obsession Victorian Box Insert / Organizer - Fits Playmat, Rules Compendium, and All Expansions to Date

This is an insert / organizer for the Obsession Victorian Box (big box) with the playmat, consolidated rules compendium, and all the released expansions through Characters (but see the excluded, mostly redundant items listed below). It…

Pobrania
214
Polubienia
37
Ocena
5
P
PrintablesVirtuallyJason

Scythe Victory Token

I really liked how the Popularity Token came together, so I decided to make a Victory Token to match. This was a quick and easy one - I just made a star (create a 10 sided circle then scale down every other vertex to make the star. Once…

Pobrania
211
Polubienia
61
Ocena
5
P

Beetlejuice Victorian Earrings

Beetlejuice Beetlejuice Beetlejuice! 🪲 Here's a pair of classy Beetlejuice earrings for Halloween. I saw these on Amazon but the Victorian style outer frame was lacking a lot of details, so I recreated them! Enjoy! This model is ideally…

Pobrania
210
Polubienia
103
Ocena
5
P
Printablesmr.rioes

Victorinox Swiss Card EDC Box

A small box for your EDC gear with a Swiss card as lid. Size is similat to an Altoids tin but a bit taller for more space. Printer: Ankermake M5 Layer: 0.2 Infill: 25% Supports: yes, organic Feel free to edit.

Pobrania
206
Polubienia
36
Ocena
5
P
PrintablesMajor Obstacle

Hegemony - Lead Your Class To Victory Insert

This insert fits inside the main game box with only a small amount of lid lift. It accommodates sleeved cards and will allow the box to be stored on edge. It is designed to streamline setup by splitting the components up by class where…

Pobrania
205
Polubienia
20
Ocena
4,67
P
PrintablesD. Harris

Victory at Sea Ship Bases

Blank bases of various sizes for Victory at Sea

Pobrania
204
Polubienia
4
Ocena
0
P
PrintablesAHoopyFrood

Victorinox 8-in Chef's Knife Cover

A blade cover I initially made as part of a gift. I've removed the monogram from the stls but have included the 3mf file so you can put your own in.

Pobrania
203
Polubienia
27
Ocena
5
P
Printablesyeawrongperson

Victorian Style Scalable Brackets

Print it laying down on it's side with “auto tree supports”. Printing laying on it's side is best for adhesion and strength between layer lines. Use a brim to reduce possibility of it lifting.

Pobrania
203
Polubienia
76
Ocena
0
P
PrintablesModel Magic

Terminator T-800 Series - T-800 Standing in Victory

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
200
Polubienia
37
Ocena
0
P
PrintablesBasil Chernov
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
198
Polubienia
68
Ocena
5
P
PrintablesJuniper

VICTORIAN MANSION ATTIC HO (1/87th) SCALE - ATTIC FLOOR

This is the attic floor of the VICTORIAN MANSION model. Depending on your printer, some components may require some minimum minor trimming. Commercially produced 4'x8' plywood flooring wasn't produced in this country until 1927. So the…

Pobrania
197
Polubienia
58
Ocena
0
P
PrintablesMalcolm

Cap Guard for Victorinox Swiss Card Scissors - Ultralight

A simple but effective protect cap for the Victorinox Swiss Card scissors. These Scissors are meant to go into a SwissCard but you can buy the scissors alone (as a ‘replacement’) and they make a really effective Ultralight Backpacking…

Pobrania
195
Polubienia
53
Ocena
5
P
PrintablesMaxd94

**Victorian Staircase Corner Shelf**

Ein kleines Wandregal wie eine viktorianische Miniaturtreppe. Zwei Podeste auf unterschiedlichen Höhen, gedrechselte Geländer und verzierte Doppeltüren machen aus einer Außenecke eine kleine Bühne für Miniaturen oder leichte Deko. Das…

Pobrania
194
Polubienia
16
Ocena
0

Ornate Victorian Grill/Cover

My sister wanted some ornate victorian style ventillation covers, to cover up some vents in her caravan ceiling. They are usually made from cast iron so not suitable for ceiling mouting, also they are hard to come by in a convenient size.…

Pobrania
190
Polubienia
63
Ocena
0
P
PrintablesIndiana Ian

Little Victorian Lamp Post

A little victorian lamp post. For easier printing i used prusa slicer to cut the lamp pole down the center so it can lay flat. The lamp was printed upside down with a little support in the center. I used clear PETG for the lamp glass. The…

Pobrania
189
Polubienia
27
Ocena
5
P
PrintablesMIKE

Victory of samothrace

You can print it with the new tree supports.

Pobrania
186
Polubienia
27
Ocena
0
P
PrintablesOliverP

6mm Bit Driver for Victorinox 91mm SAK

Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…

Pobrania
183
Polubienia
29
Ocena
4,5
P
PrintablesSprintyPrinter

Victorinox Fibrox Fillet sheath / protector

Easy to print sheath for Victorinox Fillet knife

Pobrania
182
Polubienia
12
Ocena
0
P
PrintablesModel Magic

Apocalypse Now - "Smells Like Victory" - 1979

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
181
Polubienia
41
Ocena
2