scoop for washing powder 60ml
I recommend printing it in PLA with the following parameters: 4 walls 0.15 layer height no supports
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
- Pobrania
- 536
- Polubienia
- 38
- Ocena
- 4,83
761 modeli
I recommend printing it in PLA with the following parameters: 4 walls 0.15 layer height no supports
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Two sided measuring scoop This model is a two sided measuring scoop with a volume of 60ml and 20ml for example washing powder. Most washing powders require a dosage of 60ml or 80ml. With this scoop it very easy to get the perfect amout.…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
Simple strainer for washing fruits and vegetables
Wydruk około 11,43 €–13,97 € nettoWstępna wycena jednego wariantu
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This low-profile wall mount is designed to hold an Ikea RINNIG dishwashing brush perfectly and most importantly in the right orientation, so brush-side down, on any wall you like. Stick some double-sided tape on the back of the mount and…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
This bucket is designed to catch dirty water when cleaning the pump filter of LG washing machines. It was specifically developed for the LG F14WD96TH2, but will likely fit other LG models with a similar pump filter position and height.…
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Use tree supports on build plate only + 3 walls, 5 bottom layers. The Washing Machine Drain Tray is a low-profile container designed to catch water when draining or cleaning your washing machine filter. With a height of only 25 mm , the…
I liked the design and idea, but I definitely don't like supports and multi-part designs unless necessary.
🇺🇸 Welcome to Washington D.C.! This model was created by Alexis Hudson @ alectrodesign In addition to looking great, this is also a beautiful lamp that can be lit from inside with LED lights ! The White House is the official residence and…
Summary Drain spout sized to 65 mm that fits a Samsung washing machine (my model number: WW70K44205W/EG). The Reason to Publish I searched across all major platforms and found various models that could work for my washing machine, but all…
Description: Cup to dispense washing powder / detergent. Has a ml scale on the inside. I hope you like the model! → Makes and Comments are very much appreciated :) Two V ersions Available: → New version (v6): Fully support-free design –…
My old drain hose holder that came with my washer was too narrow to actually hang on my sink. I designed this one to fit a countertop/sink combo that's up to 90mm wide. This can accommodate a 30mm hose, so it's wide enough to fit a common…
Print in TPU for the rubber feel. Change infill and wall layers depending on required softness or stiffness. Concept is not printed yet. Support might not be needed, depending on print pattern. 2mm width of each web. I have to test print…
Fed up with getting the mop out every time you clean the washing machine filter? I designed and 3D-printed a small, cust. It is made in PLA in two interlocking parts. Samsung Eco Bubble WF70F5E0W4W
This is my version of a hose guide system, designed to print in two separate pieces. I wanted to avoid using any hardware because, realistically, I would probably forget to remove it at some point and end up destroying it. So I decided to…
Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet gegenüber Dateinutzern nicht für Schäden, die durch deren Nutzung entstehen.
Designed to print on its back without supports. 2026-09-21 : Added model with inside width 216,6, (first model have 146,6)
🇺🇸 Welcome to Washington D.C.! This model was created by MiniWorld 3D collaborator Trevor DePodesta (@ coold3d4me ) cool3d4me.com The Washington Monument is an obelisk on the National Mall in Washington, D.C., built to commemorate George…
Hello, this is an automatic fruit and vegetables washing basin. Super practical for everyday use. have fun with the model!!! Model created by lwx007
Holder for Washi Masking tapes
Washington, USA (WA) Topographic Relief Map with Rivers and Coastal Waters Washington, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
A bust of George Washington, based on paintings I could find of him at a younger age than when he was president. I sculpted this in Blender.
This is a washing tunnel for firefighting hose with Gardena connection This tunnel works great for C-Storz fire hoses and we tried it also with B-Storz hoses. I printed it with PETG 3 perimeters 5 top and bottom layers 100% infill…
Simple but sturdy washing powder scoop. May have other uses.
3d miniature of Washington, D.C.! Check out my collection of other Large miniature cities: https://www.printables.com/@jarvisar_1334825/collections/1199502 Note : If roads are disappearing after slicing, try lowering the extrusion/line…
The current logo of the former Washington Redskins / Football Team and now the Washington Commanders
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Capitol Building , heavily remixed and improved by Dany Sánchez from the original…
A prop for keeping a front loading washing machine open. Category: Household
Features Scoop Volume : 70 ml Robust : 2 mm Wall thickness Slim design for high slim boxes Long tip to reach corners Low Material Usage: 23g Print Settings Layer height/Resolution : 0.2 mm Infill : 100% Material : PLA Support : Not needed
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
This model is principally based on the Washington State Department of Transportation ’s [ WSDOT ] newest vessels - the Olympic-Class Ferries . But is primarily meant to represent the WSF fleet as a whole . Certain details have been…
George Washington is a series of outdoor bronze busts created in 1975 depicting George Washington by Avard Fairbanks.
Reduced height to approx. 35 mm to drain BOSCH Washing Machine.
A small washing machine that you can assemble yourself, the drum turns and the machine shakes like a real one, as an option you can light up the display and adjust the speed of the drum. Below you will find the necessary parts as links,…
To simplify the printing process, it is recommended to print the tray with the backside facing down, aligning all internal channels for easy printing. With comparable size to the original tray that came with our Samsung machine. The…
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Lincoln Memorial , designed by Artemio García . We hope you enjoy printing this model.…
Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet gegenüber Dateinutzern nicht für Schäden, die durch deren Nutzung entstehen.
I printed all of these parts out of PLA on a prusa MK3S+ with a 0.6mm nozzle and 0.4mm layer height. No supports necessary and no glue needed. I was able to press fit the “holder” pieces to the “base”.
A dispenser/holder for small reels of tape Print Settings Printer: Monoprice Select Mini Rafts: No Supports: Yes Infill: 10 Notes: Ideally print the body of the holder upside down so that the teeth of the cutting edge are on the build…
I recommend sticking a piece of gasket on the entrance edge. It is designed for old Bosch washing machine, but you can use it for any other machine for which it will be suitable. The neck of the container is 30 mm from the ground.…
🇺🇸 Welcome to Washington D.C.! In 2020, MiniWorld3D founder Dany Sánchez visited Washington D.C. and became inspired to recreate the National Mall for the MiniWorld3D collection. Here is the first one, the National Museum of Natural…
Front Loading washing machine, perfect for your Humping robot, doll house, or game! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: AMZ PLA Black Category: 3D…
Simple sturdy scoop for washing powder detergent. Based on the Vanish Oxy Action scoop. Tip: Use the scaling option in the slicer to change the size of the scoop.
I didn't have a suitable bowl to drain the water from around the lint trap in my laundry machine, so i printed this trip dray. You can adjust the size in the slicer, just change the X, Y or Z diameter. So it will match your laundry…
Updated version 2 - improved stability I wanted some simple washi tape storage for my skadis that didn't require the roles of tape to be threaded onto a rod
20190505 - Today the drain hose from my washing machine popped off during draining... aaand made a mess. Luckily I heard it pop and could prevent the worst. Anyway, so I fired up my trusty OpenSCAD and made this adapter to hopefully fix…
Pipe fitting adapter/joiner for the drain hoses of a washing machine and condenser-dryer. As printed it fits my Bosch washer and Haier dryer perfectly. The model is parametric, so should be adjustable for other sizes. As uploaded, fits a…
The stand is designed for m3 threaded inserts. The legs are attached via m3 bolts and nuts and are collapsible. The feet should be printed in TPU and superglued to the housing/legs. It fits with or without the fans attached to the radio.…
Public domain bust of George Washington by Jean-Antoine Houdon from the Smithsonian National Portrait Gallery. Originally uploaded to the Smithsonian 3d digitization archive .
A thing for scooping washing powder into a washing machine. I finally made a version 2, when the original broke. Version 2 is built stronger and it has a bigger handle. Instructions I printed mine from PLA. 0.8mm wall thickness and 20%…
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Jefferson Memorial , modeled by Dany Sánchez . The Jefferson Memorial is a national…
A prop to hold open the door of your front-loading washing machine to prevent mould and mildew, while still keeping the door out of the way. The holes on the base are covered with a single layer. This allows it to bridge over the bolt…
Penguin Tape Dispenser holds 6-8 rolls of washi tape. It consist of two parts does not require assembly. The main body needs printed supports, mainly for the blade, which is reasonably sharp to cut the tapes. So, it is useful and cute, ey?
Adapter for emptying the water drain to the side without spilling water unter the mashine. Out it on the drain, then open the drain carefully. Ideally, place a bowl at the end ot the tube and remove the lid. Straight adapter see:
Gridfinity Washi tape holder made with Ikea Alex usage in mind using the grid made by Pey
Ever needed to drain your washing machine because the pump got jammed? Yeah me too. Twice. In one month. Kids… Gotta love 'em! What I don't love is siphoning off a whole machine 1 liter at a time using buckets, so I decided to make this…
Stylised washing machines for use in playmobil play. These were created as a tribute to Hans Grootveld , the founder and lead mechanic of Wasmachineservice Haaglanden . Print them laying down on the back for the best results. I used 0.12…
Anti-vibration rubber feet for an LG washing machine (or any washing machine with a diameter of less then 37mm). Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: NinjaTek…
Samsung washing machine insert/flap/cover for liquid detergents. Fits better to the tray than the original item that was included with the machine. Compatible with my Series 9 model (WW90J5426FW) and likely Series 5+ / 7 / 8. See…
This is a remix of roosteralex82's drain hose holder for those of us who have to empty their portable washing machines into the tub (ask me about my Panda washer!). It juuuust fits a ~4" rim (~10.16cm) and, at 6.75in/171.4mm width, can be…
simple but sturdy measering cup for washing powder. The scale measures 20, 40 and 60 ml (CAD verified). The lines are made with an extruder change in the PrusaSlicer (see 3mf file - contains 2 cups like the gcode). So sorry folks without…
Washi tape (masking tape) organizer featuring Japanese traditional patterns that can organize 8 rolls of washi masking tape in 40-50mm diameter, 15mm width. I made 2 variations of back board which is separated and replaceable.…
This is a simple measuring cup / shovel for washing powder. I placed marks at 20ml, 40ml, 60ml and 80ml. The whole cup is ~110ml. Do not expect it to be watertight.
Hole receives 7.5mm x 53mm drain filter knob Print in PETG with 30% infill and 3 wall perimeter min, no support needed
Print facing down on the largest face and paint support on the middle part - otherwise it will be hanging in the air :). Supports are easy to remove - print in PETG Haven't gotten my hands on TPU yet so don't know if it would print with…
40 gram washing powder spoon or 41ml normal washing liquid
A washing Machine Drainage Tray and Key This is something I made a couple of years ago but I have just updated it and decided to upload it. Its a tray that slides under the washing machine drainage hole to catch most of the water when you…
Mini washing machine for doolhouse. Printed in white PLA with 15% fill in with 0.2 mm step. Print on back side that way you won't have overhangs. Printed in white so you can color it after.
Gedruckt mit PLA
Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…
A box with lid for typical European washing powder bags, which usually comes with a content of about 2kg. Pretty easy to pint. I don't think I need to give any advice on how to print.
Small container to collect waste water from the washing machine when cleaning the filter. The container can be placed below the water outlet. It was designed for an Elektrolux Washing Machine. Note that the volume of the container may be…
Eine Dosierhilfe bzw. Dosierbecher für Waschpulver mit schrägem Griff und Ausleermulde. A dosing aid or dosing cup for washing powder with an angled handle and emptying tray.
I originally posted this on Thingiverse back in 2013 after I sketched one up to get me out of a tight spot. See https://www.thingiverse.com/thing:166965 I've slightly amended the design here so it should be a better print. There is a…
An addition to my home accessories collection. Holder for cotton swabs and ear buds. Wife loves this design. Printed with PLA white 2 layers 15% infill (I choose Gyroid) I would be happy for feedback. Thanks It's going to print tomorrow,…
This is a handle to hold half of a standard yellow sponge. I was never able to find the same holder online I had from way back in the day, so I designed this one. Cut a yellow sponge into halves, and then slide one half into the center…
Summary Ultrasonic vinyl record cleaner: For cleaning 33 rpm vinyl records in a 6L ultrasonic cleaner tank.…
This detergent container is a two part print. The lid can be printed seperately. This can be used to print it in a different color. Therefore, different powder detergents (whites, color, etc.) can be color coded with different lids. Print…
Replacement wheel The original wheel for the Elegoo Mercury X Washing Station was badly designed and people often had the plastic crack due to the stresses caused by the set screw being too aggressively tightened. This print can be…
The dispenser can hold 50 pieces.
washi tape holder for ikea skadis
This washing machine container has a base of 100x100mm when printed at 100%. You may want to size up a little bit to hold a full bag of laundry pods, depending on how many pods you buy. I made this with really strong hinges and that is…
This is a simple extrusion of the Capitals Eagle logo. I also threw in Screamin Eagle just for fun. Note: I do not own rights to the logos. These are extruded from close approximations drawn up in Inkscape.
A cup to measure washing powder to 85 ml. Fits perfect in my washing powder box while the handle stays clean. No supports.
This is a truss bridge modeled after a bridge in Index, Washington, USA. Designed to be printed in flat parts and glued together with CA glue. I have included step files so you can adapt it to your layout.
This is a remix of a design by Roxy2020 Washi Tape Dispenser by Roxy2020 - Thingiverse I like the simplicity of the original design but it required lots of supports. To avoid this I sliced the model up and added some 12mm M3 screws. This…
This is a cup used for ritual hand washing in Judaism. See: https://en.wikipedia.org/wiki/Ritual_washing_in_Judaism#Washing_the_hands Instructions: Print open side up with 0.2mm layer height and 20% infill. I used tree supports for the…
Washi Tape Holder Stacks up to 9 Washi tape spools with its innovative design The serrated edge ensures clean and even cuts every time you need a piece of tape, while the ledges on the outside provide a convenient spot to place tape…
Hi, i made it for my Lg Washing Machine to make it bit more Quit and it works really good i was surprised. Maybe it works with others to if not maybe scale it bigger ! In the pictures the Measurements. I printed it with 3dJake TPU black…
Distance holder for Miele's dryer or washing machine to keep the door open for a long time without the door being open or approaching further and the machine being able to dry out. Print instructions Sliced for a Prusa mini. Print without…
The rods are most easily printed by rotating them onto their side and then cutting in half. The halves stay together nicely once installed in the side pieces. I printed with no top or bottom solid layers so the infill shows, which I think…
No supports required! This dispenser has a built in cutter, can be easily stacked and stored in Gridfinity systems, and is about as compact as a washi tape dispenser can be. The dispenser prints as a single part and you'll need to gently…
This can be used to collect the water that remains. It can be printed without support material.
Sponge holder for dish washing. Easy drain. Easy clean. Can be fully disassembled for cleaning. Would be lovely if it can be made from clear acrylic-like materials.
TinyMtn Free Pack 12 - New England This is a package with 3D model files for four high points in New England, USA Mt. Washington, 6288 ft / 1917 m Mt. Katahdin, 5268 ft / 1606 m Mt. Mansfield, 4393 ft / 1339 m Mt. Greylock, 3487 ft / 1063…
I printed one Version but it was for my cases not strong enough so get inspired by this model and designed a new one. not shure how many ml are in the cup but it is suffciant for my case. @Mardor: Thanks for sharing. Print Settings…
If anyone needs a simple and space efficient storage for their washing tape rolls, this is perfect washi tape storage! It can store up to 8 washi tape rolls depending on washi tape roll sizes. The best part? If you plan on having more…