Wyniki wyszukiwania: watertight

Sortowanie

64 modeli

P
Printablesnicosandller

AirTag snowboard / motorcycle / bicycle watertight stick up enclosure - attach - case

The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…

Pobrania
368
Polubienia
68
Ocena
4,75
P
Printablessonderjul

Watertight PET Bottle Cap (New EU design with tethered caps)

As almost all PET bottles in the EU now have the new design with the tethered cap and all current existing cap 3d models don't work anymore, I took one and recreated it. It implements the important sealing lip, which seals the bottle on…

Pobrania
923
Polubienia
54
Ocena
5
P
PrintablesPrinttX

Large Spiral Vase 3, Watertight, Plant Pot

Vase 3, a beautifully designed vase with a twist and spiral pattern. This vase can be used for plants, decor or as a container. If you would like it to hold water do not use vase mode otherwise it will not be watertight. The main model…

Pobrania
633
Polubienia
49
Ocena
4,67
P
PrintablesR3D

Cactus Plant Pot (watertight)

A watertight pot for decorative presentation of your beloved plants. Printing instructions for a watertight print: 3 perimeters, 15 % Infill. No Supports needed. PLA will be fine. The design is scaleable too. Happy Printing! Changelog /…

Pobrania
625
Polubienia
107
Ocena
5
P
PrintablesBxsti

Micro SD & SD Card Case watertight screw on

A good SD Card Enclosure to carry more SD Cards safely is a must have, for every filming or Photo shooting seshion, which i have created this model for. The key to the water resistant seal is screwing it on real hard best with an O-Ring.…

Pobrania
483
Polubienia
162
Ocena
4,75
P
Printableschris0049

Simple, but rugged Airtag holder for Suitcase, Keyring (spill protect, but not perfect watertight), Version 2

V2: Improved hold on Keyring-edge I wanted a rugged Airtag Holder for using my airtags for travelling, in Handbag and on Car-Key. And as a “Position-Reporter” for my mobile home but not immeditely indientifiable as an Airtag. Version 2…

Pobrania
284
Polubienia
65
Ocena
5
P

5 gallon 19l water jug seal cap perfect seal 100% watertight impact resistant

Perfect seal for 5gallon on 19l water jugs, it is form 3 parts, lid thread, and the seal seal you make from rubber i made from 2mm sheet, to cut the seal just place the thread part on rubber sheet and cut around, place in the lid, after…

Pobrania
253
Polubienia
25
Ocena
5
P
PrintablesJérémy Reeder

Split Paint Cups - Watertight

These three- and four-compartmented paint-pouring cups allow you to pour multiple colors of paint simultaneously. Use them with acrylic paints to make pretty flower pots and whatnot. These models are derived from the designs of Jacob…

Pobrania
232
Polubienia
30
Ocena
5
P
Printableschris0049

Simple, but rugged Airtag holder for Suitcase, Keyring (spill protect, but not perfect watertight)

Feel free to use improved Version: https://www.printables.com/de/model/255488 I wanted a rugged Airtag Holder for using my airtags for travelling, in Handbag and on Car-Key. And as a “Position-Reporter” for my mobile home but not…

Pobrania
194
Polubienia
29
Ocena
5
P
PrintablesClaptomancy

PET-Cap (Watertight)

Place it as shown in the picture. Recommend ≤ 0.3 mm layer height. When tested it cold endure a lot of presure but when the cap is tilted it will not be greatly watertight! If the cap keeps turning, it's not on straight and thus means is…

Pobrania
187
Polubienia
9
Ocena
5
P
PrintablesFilamenThor

Small container (watertight)

The white insert can be used to store handcream or grease, as the rubber seal (printed in TPU) makes the container watertight. Without the insert it makes a nice storage box for small parts. I recommend printing all the parts in PLA or…

Pobrania
185
Polubienia
25
Ocena
0
P
PrintablesJérémy Reeder

Watertight Spiral Print Presets

These print profiles* make for strong, gorgeous, seamless, watertight** prints in Spiral Vase Mode . (Non-spiral variants are coming soon.) Not the usual flimsy threads of Josef Průša's spiral print profiles. Notable characteristics of my…

Pobrania
163
Polubienia
26
Ocena
5
P
Printablesbricksalad

Dragon Scales Planter - Watertight w/ excess water catchment

This is a remix of the dragon scale pot. The improvements include: More watertight and stable walls A removeable water catchment area that blends seamlessly with the rest of the pot Two alignment pegs to connect the catchment and pot A…

Pobrania
163
Polubienia
19
Ocena
0
P
PrintablesHans

Watertight SD Card Screw Case

I designed this for sd card storage. You can add an o-ring ( i think i use one with 20mm diameter) for potential(!) watertightness. Of course i can not guarantee the watertighness. I made two tops. One is flat, the other has a camera…

Pobrania
153
Polubienia
18
Ocena
5
P
Printablesbunnyology

Small Watertight Container

This small tubular container can be made watertight by inserting a commercially available 44mm sealing ring, which i s pressed into the groove on top of the body part. When the lid is screwed on firmly, the contents of the submerged…

Pobrania
146
Polubienia
35
Ocena
5
P
PrintablesCapyDesigns

Pill Container | Compact and Watertight - Tested

This is a compact keychain pill container with a secure threaded lid and a textured grip for easy opening. Great for carrying daily medication, mints, or other small items! 🖨 Print Settings Material: PLA (or any other material that is…

Pobrania
130
Polubienia
30
Ocena
0
P
PrintablesHans

Sports watertight phone box

Box designed for a sportive activity which protects your phone from water. Mount 2 greased silicon o-rings in the grooves with dimensions: ID 81 x 2mm Close the box with an o-ring ID 115 x 2.5mm Put a nylon cord thru the holes on the side…

Pobrania
126
Polubienia
17
Ocena
0
P
PrintablesRafa

Watertight Box / Extension Protection

Remix this nice box to be used as a watertight box to protect extensions for outdoor/Christmas decorations

Pobrania
118
Polubienia
28
Ocena
0
P
PrintablesBlue Robotics

Watertight Enclosure Clamps

These clamps, which can be used for 3″ or 4″ Enclosures like the Watertight Enclosures , provide a simple and easy mounting solution. The eight threaded M4 mounting holes allow the watertight enclosure to be mounted flush to the structure…

Pobrania
113
Polubienia
6
Ocena
5
P
PrintablesLému

Watertight Miniature Well

This small miniature is perfect for dioramas or tabletop games, it can actually hold water without any leaks thanks to its watertight design. It's based on the fantastic Grant Abbitt’s Blender tutorial . There are 4 versions : One empty…

Pobrania
104
Polubienia
31
Ocena
0
P
PrintablesShinPrints3D

Twisted Vase Art. No Vasemode, watertight.

Print in place vase, 100mm wide base 120mm vertical, The walls are 2mm thick so id recommend 0.5mm walls and as low as you can print for the layer height, No Vase mode. PETG. Roughly 5 hours on 0.15mm layer height at 50mm/s

Pobrania
97
Polubienia
29
Ocena
5
P
PrintablesMeister Edel

Multi Material TPU Container Watertight

Heyho This 3D-printed small container features a flexible TPUlid that provides a snug and elastic seal, while the container itself is made from PLA. The combination of the flexible TPU lid and the rigid PLA container creates a functional…

Pobrania
96
Polubienia
15
Ocena
0
P
Printablesmfoh

Watertight Container Case

Printed in PETG with 0.16mm layer hight. Nozzle: .4mm Tolerance for the threats is a 0.2mm offset.

Pobrania
87
Polubienia
12
Ocena
5
P
PrintablesCapyDesigns

Threaded Screw Holder - Quick, Useful, and Watertight Print!

A handy place to store all kinds of small parts! Super easy print, under 4h30m on an Ender 3 at 100mm/s. Knurled design for grip and convenience. Large clearance (0.4mm +/-) so almost any printer can print it. I would really appreciate a…

Pobrania
86
Polubienia
14
Ocena
0
P
Printablesvipermaseg

Small watertight bottles using recycled pop bottle lids - parametric/customisable/openscad

This is a remix of the wonderful work of fatdavemakes. I tried to make it watertight adding the lip that is present in commercial bottles. It seems to work fine with CocaCola lids, but test your fit. Your mileage might vary. Gcode is for…

Pobrania
83
Polubienia
15
Ocena
0
P
PrintablesPaul Baird

Flexible Can Lid (watertight)

Watertight on most normal cans, 75mm diameter / 415g cans. Also see my PLA versions if you have no flexi filament. And see my large version of this lid. Avoid brittle PLA's for this, it needs some flex. Print settings (Cura): Walls x 3…

Pobrania
75
Polubienia
9
Ocena
0
P
PrintablesDeadMoon

Watertight Mana Potion Bottle – 3D Printed Fantasy Prop

Bring a touch of RPG magic to your desk, shelf, or cosplay setup with this watertight mana potion bottle . I designed this round-bodied potion vessel with a reinforced neck and rim so it feels like something straight out of an…

Pobrania
73
Polubienia
20
Ocena
0
P
PrintablesRealizzaIdee

Neo - Classic flower vase - watertight

Very stable, easy to print, it can accomodate also big flowers and many flowers all thogether High details model: simplify it on yor slicer if you PC can't handle the slice process Enjoy! Powered by MakerWorld-Make My Vase (…

Pobrania
72
Polubienia
8
Ocena
0
P
PrintablesWP

Lymow Base RTK Base Station Watertight Cap

When not using the RTK on the base station this plug is uncovered and powered. So here is and easy no support cap so I can wash my base in confidence.

Pobrania
67
Polubienia
7
Ocena
5
P
Printablesstonegate

Tuya RJ45 watertight LAN Cap

If you have a Tuya Smart Camera (door security camera or a outdoor wifi camera) with an Split Cable that comes with an RJ45 Port for a LAN cable connection, and you use the camera outdoor, it might be a good idea to seal the RJ45 port…

Pobrania
62
Polubienia
6
Ocena
0
P
PrintablesNorberg

Watertight container with reused screw cap

Upcycle the screwcap TwistCap OSO 34 from a Tetra Rex package often used for milk and other liquids. Creates a waterthight seal to keep the content safe from water. Freecad model included to allow customization. No support needed.

Pobrania
54
Polubienia
16
Ocena
5
P
PrintablesPyciu

Watertight modern spiral vase

To be watertight you need to set infill to 100%

Pobrania
50
Polubienia
7
Ocena
0
P
PrintablesVSVlab

watertight can / Boite étanche

MAJ du 13/08/2025 Rajout d'un bouchon doseur et de son joint d'étanchéité. Addition of a measuring cap and its sealing gasket. B1-JointDoseur.stl, STEP B1-bouchon carre Doseur.stl, STEP MAJ du 08/10/2024 1 new size: 110 cl (this is the…

Pobrania
47
Polubienia
10
Ocena
0
P
PrintablesElGato

Watertight Tree Trunk Seed Vase

This 20.33mm height print completes in 30minutes with 0.05mm layer height and uses up only 1g of filament because of the magic of vase mode. I wanted to produce a watertight vase with natural looking tree trunk features and found this…

Pobrania
46
Polubienia
7
Ocena
3
P
Printablesgillis

A Glass, Non-watertight

Print with default settings! Use for pens or something similar …or you may try to make it watertight!

Pobrania
42
Polubienia
1
Ocena
0
P
PrintablesPaul Baird

Flexible Large Can Lid (watertight)

Watertight on most normal cans, 10-mm diameter / 1.2kg cans. Also see my PLA versions if you have no flexi filament. And see my large version of this lid. Avoid brittle PLA's for this, it needs some flex. Print settings (Cura): Walls x 3…

Pobrania
39
Polubienia
4
Ocena
5

watertight hinged modular box with scout logo (KPZ)

watertight hinged modular box with scout logo (KPZ) use silicon or rubber to seal box for better experience use some lubrikant for inner rails use strings on box (optional) print setings: supports: yes infill: 20% resulation: 0.2 mm prusa…

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesRobert

CNC router water cooler cap for water bottle with recess for o ring to keep watertight under pressure

for the cnc water cooler cap for water bottle with recess for o ring to keep watertight under pressure

Pobrania
38
Polubienia
10
Ocena
0
P
PrintablesM B

Watertight Capsule

Watertight Capsule Print with SBS for strength and durability.

Pobrania
32
Polubienia
6
Ocena
0
P
Printablesbricksalad

Ribbed Pot Planter - Watertight w/ excess water catchment

This ribbed pot has many improvements over a traditional design: Removeable water catchment area 3 holes in the bottom of the pot connect to the water catchment Holes are small enough that you don't need a grille/mesh on the base…

Pobrania
30
Polubienia
8
Ocena
0
P
PrintablesMuffelkraft

Replacement Window for Gewiss GW27051 Watertight Electrical Enclosure

This is a replacement for the transparent window in the Gewiss GW27051 watertight electrical enclosure, commonly used for sockets. Printing it in clear PETG helps maintain the original look while adding durability. An additional benefit…

Pobrania
29
Polubienia
11
Ocena
5
P
PrintablesYoephLabs

Parametric Drip Irrigation for Soda Bottles (100% Watertight); Riego por Goteo Paramétrico para Botellas

### English A fully parametric, 100% watertight, and collision-free drip irrigation system for pots and garden beds using standard plastic soda bottles (PCO 1810 / 1881 threads, such as Coca-Cola). Unlike other similar designs on the web,…

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesTibuck

Watertight ver of EQ-1 Headphones.

Remix of the EQ-1 headphone, a watertight earmuff to be used with 55mm 32ohms speakers. Print as you see fit, I printed this set out of Taulman Bridge 3 shells 35% infill with 3 tops and 3 bottom, It is important you use 3 bottoms for the…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesJohnlds

Watertight Bulkhead Hatch

Watertight Bulkhead Hatch

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesKPY

Parametric watertight planter dish

What? I've created a simple parametric model to create custom-size dishes for pots/planters. You can configure the following using millimeters: Diameter. Base thickness. Wall thickness. Total heigth. The angle of the external wall. How?…

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesGerdS

CADDX Vista watertight housing

I designed this housing for upgrading my old amphibic Mariner II / SplashDrone, which was equipped with a GoPro 3 in a watertight gimbal and analog video before. As the Vista produces a lot of heat and needs efficient cooling it cannot be…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesVSVlab

Flacon étanche / Dot watertight bottle

FR (English lower) Flacon inscriptible avec un système de pastilles ATTENTION, je n'ai pas encore imprimé ce modèle, mon imprimante étant au bloc opératoire pour une chirurgie de la tête. A la base, c'est juste un récipient étanche pour…

Pobrania
19
Polubienia
4
Ocena
0
P
Printablespachek

watertight flowerpot

Print the external vase on spiral mode. For the internal piece use these settings to make it watertight : 5 perimeters 5 bottom layers 5 top layers Iron the bottom hole 100% infill 1.1 extruder multiplier 30 mm/sec speed nozzle…

Pobrania
12
Polubienia
3
Ocena
0

Screw mounted watertight Wall Planter Remix

Remix for wall hanging: I added a flat side to make it compatible for hanging on a wall and screw holes (but watertight).

Pobrania
12
Polubienia
2
Ocena
0
P
Printableskulfürst

"Watertight" revolvable cap for Goobay Bike-Power 5.0

USE ON OWN RISK EDIT (24-Sep-2018): Due to the flaw of the small gap left in the revolvable cap design, I decided to create one that does not feature the revolvable upper cap, and instead is intended for a permanent connection to the USB…

Pobrania
11
Polubienia
0
Ocena
0
P
Printableslegrandbleu

Elixir Vase – watertight FDM vase (no spiral/vase mode) A1 mini friendly

Files: STL – universal 3MF (Bambu/Orca) – ready “watertight” profile Tools used: Created with MakerWorld-Make My Vase ( https://makerworld.com/makerlab/makeMyVase ) Recommended watertight settings: Nozzle: 0.4 mm Layer height: 0.20 mm…

Pobrania
7
Polubienia
2
Ocena
0
P
Printablescyclodog

Watertight Door Dog

3D printed replica of a watertight door "door dog" for a museum exhibit. On ships, a "door dog" is a lever or handle that secures the door to create a watertight seal. These are vital for maintaining a ship's watertight integrity and…

Pobrania
6
Polubienia
0
Ocena
0
P
Printableshjembaek

Milk Saver Watertight

Milk Saver – Watertight Container Designed to save the day when your milk carton starts leaking! Use the settings to make a watertight print. Compatible Milk Carton Dimensions Width x Depth: 75mm x 75mm Filament Prusament PLA Azure Blue…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesForgeFiles

Nft Nutrient Film Channel End Cap, 3 Inch Pipe Size, Watertight - 3D Printable STL File

A unique 3D printable creation — this Nft Nutrient Film Channel End Cap, 3 Inch Pipe Size, Watertight Seal, Drain Port Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesArtur_999

Voronoi vase with watertight insert

Realization created as follows. Outer part printed solid with purple PLA. Remelted in salt powder in approx. 180C internal temperature (it took about 2h to reach). Be careful with temperature, PLA easily burns. After this, can be cooled…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesZed main

LuminaCAD Watertight 3D Lamp Shade (E27) - Bulb Profile

Enhance your interior lighting with this classic, rounded 3D-printable lamp shade, generated as a completely manifold "LuminaCAD Watertight 3D Lamp Shade (E27)". Provided in the file , this variant features a smooth, bulbous profile that…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesLevytek

Crumpled Paper Style Bud Vase, Organic Wave Texture, Watertight Mini Vase for Single Stems

A small bud vase shaped like a crumpled paper bag. Three overlaid, non-repeating wave patterns sculpt organic dents across the surface — a texture a lathe-turned form simply can't produce. 42 × 43 × 84 mm, watertight, with a narrow neck…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesZed main

LuminaCAD Watertight 3D Lamp Shade (E27)

Upgrade your space with this custom 3D-printable lamp shade, generated with LuminaCAD. The mesh is 100% manifold and watertight, ensuring a smooth, error-free slicing experience. It is sized to fit standard E27 lamp sockets (approx. 40–42…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesZed main

LuminaCAD Watertight 3D Lamp Shade (E27) - Bulb Profile (178mm)

Enhance your interior lighting with this classic, rounded 3D-printable lamp shade, generated using LuminaCAD. This compact model measures approximately 178mm in diameter and features a smooth, bulbous profile that provides excellent light…

Pobrania
1
Polubienia
0
Ocena
0

A watertight box, can be adapted with fusion

A watertight box with a gasket and tight sliding locks. Use a cut fillament for the hinge. Optionally fix the fillament with soldering iron or hot thing in place. Print the optional gasket in TPU.

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Elixir Vase – watertight FDM vase (no spiral/vase mode) A1 mini friendly

Files: STL – universal 3MF (Bambu/Orca) – ready “watertight” profile Tools used: Created with MakerWorld-Make My Vase ( https://makerworld.com/makerlab/makeMyVase ) Recommended watertight settings: Nozzle: 0.4 mm Layer height: 0.20 mm…

P
Printables

Ribbed Pot Planter - Watertight w/ excess water catchment

This ribbed pot has many improvements over a traditional design: Removeable water catchment area 3 holes in the bottom of the pot connect to the water catchment Holes are small enough that you don't need a grille/mesh on the base…

P
Printables

Watertight Container Case

Printed in PETG with 0.16mm layer hight. Nozzle: .4mm Tolerance for the threats is a 0.2mm offset.