616 modeli
Their are 2mm holes for glueing a 2mm wire at the back of the welding machine and in each tool lead. Use a 2mm metal wire into the hole for the electrode. Print welding leads upright with a brim (see gcode file).
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is a shell for a common Chinese spot welder (search for “spot welder 99 gears” on your Chinese marketplace of choice). I did this to try out the “glass” printing technique with clear filaments - it works, but it also takes a very…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
From CederB's Description: The kWeld from Keenlab is an excellent battery spot welder, especially as a desktop unit with the accompanying ultracapacitor bank kCap, the power supply module kSupply, and a compatible server power supply. But…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
UPDATE: WARNING: this part will probably break after a couple weeks if printed in plastic - learned that the hard way. Use this for temporary fixes, or if you can, print this in a strong material (metal if possible!) to ensure it lasts a…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed mine in PETG, but CAN be done in PLA as well as other materials. The model just needs the old spring and washer from the original trigger to be put on the split pin on the rear of the trigger. I included the CAD file used so…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is an easy but useful print. If you build lithium battery packs this is handy. Created to use with my 18650 power bank build. Prints fairly fast also.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Solar Eclipse Viewing Frame for 119×89 mm Welding Filter Plate Never observe the Sun without proper eye protection. Looking directly at the Sun without a suitable solar filter can cause permanent eye damage in just a few seconds. Always…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English This handle is a replacement part for a welding mask whose original handle broke. The model was designed as a single piece for strength, but I split it into two parts in the slicer to make printing easier and avoid supports. After…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is another 4-in-1 tool for 3D printing in the style of my model https://www.printables.com/model/191102-spatula-3in1. With this model you can cut 1.75mm filament at 45° and 90°. You can also cut the PTFE tube at 90°, and you can even…
Easy to print friction welding tips for your Dremel! No Supports needed and is a great project to use for your left over spools of filament you have laying around. 100% infill .28 layer height Print flat with a brim Attach to the tip of…
A jig for welding 1.75mm PLA filament. Welded filament slides smoothly through 2mm inner diameter tubing without sanding. A PTFE tube and coil spring are required separately. -PTFE tube: Length: 40mm, ID x OD: 1.8mmx2.6mm, h…
A small welding helmet with a loop for a split ring. Made for the engineers at work. Scales down nicely if you want it a bit smaller to fit in your pocket. No supports required. If you would like your own company initials or simple logo…
This is a remix, I added Bowden PTFE Tubing on one end, after heating up both filament ends with iron, then push filament into the Bowden tubing, it makes the join smooth, and the right size. ----------------------------- This splicing…
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
ITALIANO Questo modello è un supporto per saldatura di cavi, che consente una comoda presa dei fili per una saldatura perfetta, dimensioni: 75*50*32mm, apertura 0-15mm Dimensioni compatte e trasportabili, tempo di stampa 90min, consumo di…
Goblin gözlüğü. Orjinal gözlüğümü 3D tarayıcı ile taradım. Kapaklar ve gözler arası kordonu sıfırdan tasarladım. İsmimi anmak istemeyen olursa diye “GOBLINWORKS” yazmayan bir çerçeve de ekledim. PETG, ABS ile yazdırmanızı öneririm ama PLA…
18650 accupack soldering/welding assisstant for accupacks up to 4x6
Instructions as described by the original file maker (ZieLandy): You will need A PTFE tube and coil spring. -PTFE tube: Length: 40mm, 1.8mmx2.6mm -Coil spring (Eg. From a ball pen) Instruction of use: Use a lighter or heat gun to heat the…
Hanger for vise grips. This was design around hanging welding clamps from. The small clamps are held but there is a lot of slop due to it being designed around the larger clamps. Note the following: The orientation of the model may need…
If you've used or have a new Sunlu Filament Welder, then you know it's practically a 3 or 4 handed operation. This model is my first attempt at designing some "helping hands" to assist in the process. It can definitely use some…
Part A: Countersink hole for M3x12-14mm Flat Head Screw Part B: Hole for M3 Heat-Set Insert
A simple but slightly sculpted hook to hold your welding mask. The hook fits my ESAB mask with a 32mm headband with room to spare. Use 4 or 4.5mm countersunk screws. Print settings: PLA (or whatever) 3 perimeters 15% infill Print on its…
18650 Battery Clamp Mounting Holder for Pack Spot Welding. Also look at my other models and plce like them.
Remix of a popular filament welder. I cut the body in half so that I can remove it and just leave the spring-wrapped PTFE tube sitting on the filament until the print completes when the filament can be clipped and the tube removed..
Public domain model of a welding mask and torch by snot_nose . Originally uploaded to Blend Swap .
Simple hook for various size welding helmets
The jig us actially optional; the magic is the silicon tube! You can do it without that jig, but it will help holding the filament while welding. After printing the jig, you may need to use a cutting knife to make the cutouts fitting for…
Case and spot welder holder. The cover has button extensions included.
To download my project, a cell welding holder, it allows you to weld up to 6 cells.. The handle is divided into two parts, the lower part is tighter thanks to which the links are evenly arranged, and the upper part is looser so that you…
One of my rolls of cheap Ebay filament had a bunch of ~2" long brittle spots randomly throughout the roll, so I started splicing it back together by hand. I eventually decided to make a jig, but I didn't really like most of the ones I…
Hello. My proposal for creating battery packs for the size 21700 Print quality 0.2 Material: PLA , PLA + , PETG , Infill according to your reasonin
Requires : -4X #4-40 x 1.25 SCR -4X #4-40 NUT Printing: Very minimal support only for retained 4X retained nut features. Note: Fastener holes are tetrahedral because my printer sometimes isn't great at producing cylindrical features with…
A holder that helps welding 18650 batteries up to 6x5 cells square, or 6x3 cells tilted. It allow using nickel strips up to 10mm. No supports, no brim/raft needed.
Hello. My proposal for creating battery packs for the size 18650 Print quality 0.2 Material: PLA , PLA + , PETG , ASA Support as needed Infill according to your reasonin
This is a remix of the mixing nozzle by @drho1337 to be compatible with the 14ml J-B Weld Clearweld Epoxy part number 50114. The ‘EZ Mixer' that comes with it is not available to purchase extras for. Optimized for fast printing with a…
Case for the Kweld Battery Welder and KCap power module, This case combines the 2 units into one for easier use and storage; an XT60 connector is used for feeding the supply voltage to the capacitors. [ Filament used in photos is Fusion…
18650 Battery Welding Jig — 5 Slots This panel is designed to precisely align 18650 cells for spot welding. It supports both fresh and pre-welded batteries with 8 mm or 10 mm nickel strip . 📌 Features: 5 slots for 18650 batteries Suitable…
This is a very simple tool, but also very handy, so I decided to share it. It fits 3 cells of 18650 size and squishes them together to waste as little space as possible. I've used it for spot welding tens of them and it helped me save a…
2D TIG Welder – Decorative / Practice Model This is a simple 2D model of a TIG welder, designed mainly for decorative purposes or as a visual prop. It can also be used as a basic training aid for beginners to understand the layout and…
New and improved last meters of filament? these take 20cm each! New tip geometry. Added bolster for improved stability while printing, depth gauge for insertion and… Look like a tiny sword rack while not in use! use same colour to hide…
I re-mixed this excellent piece to remove the Gridfinity framework on the bottom and added four divots to use silicone closet door bumpers as non-skid pads. Excellent design. You will need two M2 x 35mm boltslock two together on the end)…
I propose a remix of the Tinghiverse support https://www.thingiverse.com/thing:2416282 in which I adapted the upper part for the Pinecil Pine 64 welder. In particular, the front diameter of the support has been calibrated to contain only…
This welding rod holder is a vase mode print suitable for tougher filaments PETG, ASA, ABS etc. Note that it is not suitable for hygroscopic rods as it doesn't seal the rods from moisture in the air. I set the extrude width to 0.8mm for a…
UPDATE: Modified the top part, so the labels not cut out just milled in Simple spot welder case BOM: Spot welder: https://a.aliexpress.com/_mqFZBxw 4x M3x16 4x M3 hex nut
Dust filtering system for chinese autodarkening welding helmet. All parts printed on my Prusa I3Mk2s. As spare elements I used 3M filtering parts.
Welder Garden Gnome – Industrial Charm Meets Whimsical Magic This isn't your average garden gnome—meet the Welder Gnome , the unsung hero of fairy yard maintenance and midnight metalwork! Some supports are needed. I used organic-style…
This is a remix of nushipwright 's " Spot Welder Box (JQ-DHJ02B spot welder) " with a handful of improvements listed below. Increased wall thickness across the board from 1mm to 2.5mm making it far stronger Added 4x M3x8 screws to avoid…
This is another kWeld case. Main difference - no support is required. To assembly, first install kWeld on the base using 4 M3x6 bolts. Then install screen part, then top. Be careful with plastic parts. Enjoy! Updated to v2 - more locks…
Welding / Protective goggles for Labubu I sewed on a 6" or so long piece of elastic through the loops to secure on the Labubu head use some plastic packaging and cut some small circles to pop into for lenses ready for action! print with…
The regular size can fit into 2.75" to 2" piping roughly and the smol boi can fit into piping under 2" to 1" roughly Just uses the brass gas fitting that came with my argon regulator, it uses ¼ in tubing
I jig designed to hold up to eight of your 21700 cells together while you spot weld them.
I wanted more storage on the welding cart, contemplated buying a Hel-Hook but found a design on Thingi that fit the bill. Only problem was I'd have to remove my gas regulator to install it. So I remixed it to add a removable section of…
Motivation I like doing friction stir welding for 3D prints, but when I was using the classic model on thingyverse, I could never get the tip on perfectly straight. I decided to do my own model, but instead for the 1/8th collet that comes…
Extremely simple hook for my welding helmet. There's not a lot to say about it, I couldn't find a suitable one so I made it. Comes with the FreeCAD file for further modification if needed. If you'd like to use any of my models, feel free…
Spot welding guides for 2170 cells (21mm diameter, 70mm height) that are meant only for support during welding, after the pack is welded remove the guides. Category: DIY
c'est bien mon modèle (f3d a l'appui) vu la simplicité de modélisation je n'ai même pas eu envie de chercher. pas de complexité pour l'impression
The case is based on my parametric “ Rugged Box ” and is resized to fit the Docreate Gear30 Spot Welder . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut…
With M3x12 Hex Head Screw And Nut
21700 Li-iron Battery pack Base for Spot welding 4S pack.
Join your last lines of filament together, don’t waste them. This tool allows you to use a soldering iron or fine pointed heat gun or even a lighter to fuse lefter over filaments together. Simply use some ptfe or silicone tube to make a…
Welding Table Plug for 16mm Holes. O-Ring is 10x1,8mm PETG or Tough PLA
Tig welding tungsten electrode holder there is files for both 1.6mm and 2.4mm the top suits both with a gridfinity base, loop at the top for a lanyard or carabiner or can be stored in a pocket or tool bag. Each tube can hold 19 electrodes…
Guides for welding up to 5 x 21700 LiPo batteries together. FreeCAD file is included for easy remixing.
Remix of @RinoaLilieu_609203 cell holders. I made the gap between the cell contact and the bottom of the holder much smaller, so nickel strips for spot welding will make much better contact.
Hello, This is a remix for Battery spot welder pen made by s3rkan (thanks for that), I kept the idea and a i re-made complete the drawing in order to to fit the components that i have in my garage, the spot welder pen will help me to weld…
Strojek jsem použil ze starých hodin co byli na vyhození.
!!!!not for professional use!!!!
Este diseño es uno de los ejercicios de nuestro nuevo curso de diseño 3D avanzado con Fusion. Info del curso aquí https://control3d.net/curso-de-diseno-3d-fusion-nivel-intermedio/ Suscríbete aquí https://control3d.net/registrate/ Soporte…
USE THE GCODE IF YOU HAVE AN ENDER 3 V2 if you slice it your self use 10% infill or higher without supports
** If you find my designs useful, please tip $2 by clicking “Support Designer” on my main profile page. Thank you!! *** Print Settings Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No Infill: 10 Filament brand: Hatchbox…
The kWeld from Keenlab is an excellent battery spot welder, especially as a desktop unit with the accompanying ultracapacitor bank kCap, the power supply module kSupply, and a compatible server power supply. But as I couldn't find any…
3D Printed Welding Models: T-Joint & Butt Weld Educational Tool Description: These 3D printed models are designed to visually and physically demonstrate the two fundamental types of welds—T-joint and butt welds—in an educational setting.…
Welding mask 2x4 lens. I print them in PETG at least and use with Ameriarc lens. Made to be used with “ Esab Head Gear Warrior Tech” but I believe that other headgears will fit also. Depending on the color of your filament, is possible…
Just a simple stand/base for the spot welder from battery hookup . This base fits the taller V1 model they previously offered as well as the shorter V2 spot welder found here:…
I designed case for my GX591 Spot welder using brass inserts. Print settings Material: PETG Layer Height: 0.2 Infill: 40% Assembly 8pcs M3x5x5 brass inserts 4pcs M3x6 screw 4pcs M3x16 screw 1pc nylon washer If you like what I do, you can…
I made a rear protection cover for the golf 4 vehicle spare part light Replacement part Enjoy!
Originally designed for a Welding Mask wall hook but I have printed off a few more to use as motorcycle helmet Wall Hook after testing its durability. I have included the prusaslicer setup file which includes cylinder modifiers to…
Love the Fireball tools fixture clamps and jigs so designed and printed some basic models. Printed these in PETG-CF at 100% infill so they are reasonably strong. Used M6 heated inserts to be able to bolt tabs to them for guidance and/or…
get 2p connections perfectly spaced every time
Remix of Lopata's model to accomodate 4mm PTFE and stiffer more rugged 8mm Spring Also added some tether holes
Print Settings Printer: Own Build: ndl V3 Rafts: No Supports: No Resolution: 0.2 Infill: 25 -40% Filament: Generic ABS doesnt matter Notes: Print in ABS, Infill: 20-40%, Speed: 60mm/s, Bed: 90 degrees Celsius, Noozle: 240 degrees Celsius
alles was sie brauchen ist ein PTFE schlauch den sie wie auf dem Bild in die Löcher einführen und auf diese längen dann kürzen es muss nicht perfekt sein
This model will be useful for those who have empty filament spools and don't know what to do with them :) Before you start, you need to buy some parts, presented in Table 1. Table 1 Buy this position Position Named Quantity of pieces…
waterproof so far, no clue how airtight had some silicone grease on the threads when I submerged it, might have made a difference If someone with better CAD skills could add some strength and a way to use O rings that would be great!
BOM: Printed with ROSA3D High Speed PLA Signal Violet The perfect companion to my single-row holders! This double-row set of 18650 cell spacers is designed for building larger, high-density lithium-ion battery packs safely and…
I had trouble seeing my test pieces in my school's dark welding booth so I modeled up these clips that mount under the adjustment knobs on the hood's temples and hold small flashlights. There are 2 different sets of files, one for lights…
Rod holder with removable top cap. I did fuzzy skin on the cap for 50mm to make it easier to use.
21700 Cells Parallel Stackable Tray with Screws – No Welding Required This tray is designed for parallel connections. It has a slot for a nickel or copper strip up to 10mm wide. ⚠ CAUTION: Make sure to install the cells in the correct…
Stojak do spawania akumulatorów 18650 w różnych konfiguracjach pakietowych. Do sprawnego i precyzyjnego łączenia w pakiety warto użyć dwóch sztuk do łapania akumulatorów na górze i dole, otwory pozwalają na bezproblemowy demontaż.
1:14 scale model of a man sitting and welding
I've mage that jig for creating custom batteries for my tools. It is created inspired Chinese jigs however it is is much safer.
WARNING: Do not assembly if you have no electrical knowledge, this can be dangerous if you set something on fire! Also, this is not intended to be used for longer periods of time, plastik will melt at some point. Filament welder with…
this is just what seemed to me the missing piece of the original
This is a holder/handle for the spotweld electrodes of a battery spotwelder. Specifically the ones found on Aliexpress. With this Thing you can hond both electrodes with one hand. You can make your own spotwelder using a microwave…
Slot case battery 18650 13 cells x 5 for welding battery magnesium stripes. Design to have a compress but rigid frame for batteries of big format of cells. this case 13 cells. .8 walls & space 1.4mm
Print with External Perimeters First.
These are fencing blocks and locating pins for use on a 2 inch on Center metal Fabrication table with 16 mm holes. Yes they're made of plastic and they will melt if you try and weld too close to them. But they're certainly a lot cheaper…
This is a model for welders to practice tig welding anywhere. You use a sharpie in the holder and use a piece of paper to see how you do. If you press too hard/go to slow, the lines will be thick and bled. If you press too light/go too…
![Solar Eclipse Viewing Frame for Welding Glass [Rámeček pro svářečský zorník]](https://media.printables.com/media/prints/02f52932-7cfd-4351-9aa0-ceab90ff374e/images/13501576_e0a5c839-0f7f-40c6-91ca-74bf35441815_979d2f7e-bf53-45be-96d2-c99b032bf114/img_20260805_095729_386.jpg)
![Filament Fuser Joiner Welder [REMIX]](https://media.printables.com/media/prints/596984/images/4754293_d4ff34be-76f8-4ef5-ad05-633c1964d6d1_1885b8ff-7866-4517-8ee2-c57a674ea37b/20230928_154158.jpg)
