128 modeli
For FDM - use the separated floor variant. I recommend 4% scale. This is an all-original model I designed specifically for 3D printing. I've tried to keep the assembly as simple as possible. There's an additional folder containing the…
A simple print to hold up to six bits in the Williams WRS-1 Magnetic Ratcheting Screwdriver . Prints well standing up or on its side with organic (tree) supports. Once printed, remove the supports and press fit into the cap. If the cap…
Here is a new easy to print (no supports) Donut Heaven Mod. It has only a few parts to print. You can paint it to your liking. The Logo can be illuminated with an led stripe.
z ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
Maqueta del BMW Williams del año 2004 que pilotaron JP Montoya y Ralf Schumacher
Here is a new version of my Donut Heaven Mod. This time with a gable. It has only a few parts to print. You can paint it to your liking. The Logo can be illuminated with an led stripe. Print front wall and roof with support! Other Parts…
You can mount this on the original foot. But… ... I recommend using my foot. My foot will put the trafficlight into some “laid back” angle, so it is better to see from the players viewpoint. You can use the original inserts (heavy pushing…
This is a remix of johnzanussi's Williams Screwdriver Bit Holder. I liked the original bit holder a lot, but it didn't hold my bits tightly enough. So I made a couple improvements to hold the bits more securely. Compared to the original:…
A 3D printable version of the Williams Key, which is designed for EMS and firefighters to quickly open doors. Ideal for preppers and survivalists. Designed to be printed in 2 parts, so that it could fit on the printing bed. This however…
A simple print to hold up to six bits in the Williams WRS-1 Magnetic Ratcheting Screwdriver , based on Williams Screwdriver Bit Holder by johnzanussi . Prints well standing up with no supports. Once printed, remove the brim (if used) and…
Print 100% infill. Remove the screw which removes the lightbulb in the coin return button. Mount this through that hole with the screw. Attach leaf switch to other side and wire to coin1 or coin 2 on your controller board.
I've been updating my Get Away pinball machine and came across the excellent traffic light model OlloG ( Williams Getaway - Trafficlight Mod V3.3 by OlloG ). The tolerances were a bit loose when I printed it (light inserts just fell out)…
https://youtube.com/shorts/4mCKqLNUFAk?feature=share I didnt wanna pay for the metal version so i copied and sculpted the key in Nomad sculpt and made it a STL for everyone. Print in .2 layer height You can scale what ever size to fit…
Rock Bands - AC DC - Cliff Williams 3D printable model.
Printed well with a .4mm nozzle at .2 layer height. Remove speaker grille before installing. New cover fits flush with the backbox
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Calros Sainz from Williams . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
This is a replacement for the Supercharger Bridge of the Williams Getaway Pinball Machine. This part re-uses the original front-plate plastics.
This is a replacement for the silicone switchcovers used in the Williams Getaway Pinball Machine. Maybe they will fit on other machines too? You can use the cover alone, or optionally add the freeway sign. There is a "normal" size cover…
A beautiful picture of dancing Nico Williams and Lamine Yamal
ash williams chainsaw
Want some coasters for your arcade/mancave that are themed? Well here are some coasters that have the Bally/Williams logo. Both coasters are 100mm in diameter and 5mm high. Now Updated with a Gottlieb Pinball coaster. Print Settings…
Droptarget for "Indiana Jones" and other williams pinball machines. Print from ABS or PETG! Pla will break….
Replacement circle targets for Williams/Bally games.
This is a cover for the Opto-Switch on the Getaway supercharger ramp. They are clipped together so they can't fall off. You can print this without support. Looks best if done on two colors....
STEP file for Jacob Williams "Unofficial XRP Kit CAD" OnShape model (06/20/2024)
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper (preferably…
This is not a perfect 1:25 scale model, but it's close, and it's printable. If you're looking for a scale model, go here: https://www.thingiverse.com/thing:3348131 If you want a Christmas ornament though, you're in the right place.…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Alexander Albon from Williams . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible…
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Hold six 1/4" driver bits in the handle of the Williams WRS-1 ratcheting screwdriver . Remix of the great idea from johnzanussi , this re-work offers easier installation and removal of the driver bits while still maintaining a firm hold…
Ash Williams Chainsaw Hand
Williams F1 team inspired keychain, with a compact and elegant design. A perfect accessory for fans. Recomended print settings: Layer Height: 0.20 mm Ironing: All top surfaces Material: PLA, PETG ¡La pasión por la Fórmula 1 ahora cabe en…
A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…
It may do in a pinch, so you don't have to pay for overnight shipping from your pinball parts source. I don't know how long this will last for you. My Chicago Coin Red Baron machine uses this Williams flipper bushing. I replaced both…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
This is a speaker grille I designed for my virtual pinball cabinet. It's 6 3/8" across and has been designed around the RGB ring that I hacked out of this CPU fan on Amazon. You can print and stack the center ‘W' logos - two looks best to…
the brave, fearless and humorous character
Celtic style placemats and coasters for Christmas. Files prepared using Blender and images from Pinterest and other sources Print instructions They are printed with the patterned surface on the printbed. This gives a smooth finish and…
This is a replacement for the silicone switchcovers used in the Williams Getaway Pinball Machine. Print this without supports.
This is a cover for the Startbutton in the Williams Getaway
A remix of LooseLunch's Williams Screwdriver Wall Mount so it is now compatible with the Honeycomb Storage Wall system. Print with at least 5 outer walls and supports for maximum strength. If you like this remix please like and post a…
Williams FW48 F1 Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Caleb Williams “ICEMAN” Drink Coaster Caleb Williams made several amazing passes for the Chicago Bears in their recent Wild Card win against the Greenbay Packers, including this crucial, off-balance 27-yard fourth-down completion to Rome…
Flipper button for Williams EM Pinball machine. Part number 3A-7208. One of the buttons can be held in place with a 1/4 e clip and one uses a 1/16 cotter pin or a section of paper clip. Print Settings Printer Brand: Creality Printer:…
This is a badge for your original Williams arcade coin doors. Simply use some doublesided tape to mount. Does require the use of a multi color capable printer.
I wanted to change the “Start” text on a few different coloured buttons that I had for my Virtual Pinball cabinet build, and recently got access to a vinyl cutter, so I figured I'd print out a replacement cap for the buttons so I could…
Famous Composers - John Williams
These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…
Robin McLaurin Williams — Buste FR 🇫🇷 Ce buste représente Robin McLaurin Williams, capturé dans une expression à la fois chaleureuse et espiègle, fidèle à l’énergie unique qui caractérisait l’acteur. Inspiré de la photo la plus populaire…
This is a replacement pin for Williams strike master. It should fit any other bowler that uses a 10 1/4" pin. I found these were slightly heavier than the originals, so I shortened the up spring by 3-4 loops and it works perfectly. I used…
German: Für mein aktuelles Flipperprojekt, benötigte ich einen Vorlage, um die Löcher für den Pop Bumper zu bohren, im richtigen Abstand. Dieser passt für Flipper von Williams, Ballys und Gottlieb. Die Löcher passen wirklich sehr exakt,…
¡Añade a tu colección esta espectacular figura 3D de la talentosa actriz Michelle Williams! Este modelo ha sido cuidadosamente diseñado para capturar la esencia y elegancia de Michelle, siendo una pieza ideal tanto para los aficionados al…
Kickout hole cover. Used on early 60's Williams pinball, and probably others. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Infill: 20% Filament: generic PETG Category: Replacement Parts
Cabinet Protectors for the Williams Getaway Flipperbuttons.
Robin Williams Hueforge Painting No need for an AMS, Just change color at layer. Both STL and Bambu Studio profile is uploaded. Any of my 200 x 200 Frames can be used. Just glue them together. Colors used These are the colors I used, not…
Print your own finned posts when you want to use a color not offered by current pinball parts vendors. Battle tested with hundreds and hundreds of games played in multiple machines, I've never had one break even with basic PLA filament.…
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
Drop in replacement for a Williams wedge top T-base drop target. Original Williams part numbers B-9534, 03-7773-4. Compatible with Comet, Space Shuttle, Road Kings, and possibly others. These have become nearly impossible to find in any…
Williams Drop Target Guide P/N 03-7479 or 3B-7479 - MODIFIED Created by Outpost Kodelia ( https://www.thingiverse.com/OutpostKodelia ) License: Creative Commons - Attribution This is NOT a 1:1 replication of the original Williams drop…
Robin Williams, Carpe Diem Wall Art
this is an outlane guide for the williams indiana jones adventure pinball machine. the right outlane switch doesn't always trigger when missing the narrow escape. this guide makes sure the ball won't miss the switch. inspired by cliffy…
Replacement part Cap for Williams Comet Table Print Settings Printer: Hypercube Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Jupiter PLA Black Category: Games
There's two versions. One which is for MMU/AMS users. The other one is for normal users. First you print the blue part, leave it on plate and then print the white part.
Included are three apertures corresponding (more or less) the sizes offered by Williams for the WGRS-54 peep sight. If printer tolerances are OK, it'll thread right in. These should fit any other peep sight that uses the same 7/32-40…
John Williams –Bust This bust represents John Williams , one of the most influential and recognizable composers in modern film history. Renowned for his legendary scores for cinema, his music has shaped generations through iconic themes…
Wall mount for Williams Screwdriver. Can print with any settings, preferably with 3 or more perimeters, any infill. Print as oriented.
A remix of LooseLunch's Williams Screwdriver Wall Mount so it is now compatible with the Skadis Wall system. Print with at least 5 outer walls and supports for maximum strength. If you like this remix please like and post a make. Thanks
Created these files to add a stern style action/fire button to my virtual pinball machine. Switch mounting can be made thicker to adjust for any difference in mounting height. Switch mounting can also be double sided taped to receiver to…
HSW insert for (at least) the Williams WRS-1 Ratcheting Screwdriver 3 wall loops, no brim, .2 layer height, infill to your hearts content. Can be printed w/o support long ways.
Pinball Williams Fire! UpPost Piece
CZ/SK Vhodný pro nenáročné uživatele, pro milovníky Williamsu a F1. k připevnění jsou zapotřebí 2x M2,5x20mm šrouby. Děkuji za stažení a užívejte si model EN Suitable for undemanding users, Williams fans and F1 lovers. 2x M2.5x20mm screws…
Allied Leisure was small maker of pinball machine that was active only during the 70's, releasing only 15 machine. Known for their unique cocktail table style machine, they use unique parts and assemblies that are normally universal on…
This is a modified end of a Williams upkicker solenoid. The design is deeper than the original, which means the ball settles in faster and hopefully avoid situations where the ball is still moving when the game fires the upkicker, often…
Bring the charismatic energy of a pop legend to your space with this incredibly detailed 3D printable STL figurine that captures every nuance in stunning miniature form. This meticulously crafted statue showcases authentic styling and…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4S with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
Renault Clio Williams 1993 Caricature
Requires a very good first layer calibration.
This desing is ispired by the 1979 film musical HAIR. The design is made by OPENSCAD. It is fully customizable, you can set: size distance thickness connecting style pin length … In the slicer you should set two color changes if the text…
LED Holder for Pirahna Super-Flux RGB LEDs and Williams/Bally Pop Bumper Bodies Created by Outpost Kodelia ( https://www.thingiverse.com/OutpostKodelia ) License: Creative Commons - Attribution This is designed to fit in the standard…
You really have to have your first layer calibration correct for these to print nicely.
this support often breaks, and i had to fine-tune many details to achieve a satisfactory result: this is the last iteration! i suggest to print it with 100% infill and PC material for higher durability and better elastic performances at…
Print with decent infill and to avoid splitting around the mounting holes, 3 to 5 perimeter walls recommended.
Many UK trailers have ~20mm pins to secure sides/tailgates. The washers perish or vanish over time. This is a replacement washer. Print in TPU. Affix vertically. Thickness is 4.5mm, scale if necessary in the slicer. To keep it uniformly…
Williams Pinball 03-8630
This is the rocker switch I installed. https://a.co/d/023pA6a
I designed this wall mount specifically for the LEGO Racers 8461 Williams F1 Team Racer (2002) . The mount holds the model securely while remaining almost invisible from the front, making it ideal for displaying this classic 1:8 scale…
Modeled after / for a WMS Full House pinball machine. Sized to use a 3mm screw with washer, or you may print the attached peg which should fit very snug to secure this with the leaf bracket.
Various parts for repairing Williams Hot Shots Basketball arcade game. Post cap relates to a part to keep a generic bar stable in the shooter mech housing (mine had a bolt here which seemed like a bad idea) The other parts relate to the…
I used this to attach a 120mm fan to the existing holes in a Williams Widebody pinball cabinet (Judge Dredd) that I converted to a virtual pinball machine. Printed the adapter for the fan at 5% infill, no supports
The ramp lifter was broken off my slugfest homerun ramp. I came up with this simple bracket to epoxy to it. It has been installed and works great. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes…
This is a funnel custom designed for pouting Evan Williams whiskey from those heavy 1.75ml bottles to the 750ml bottles. The neck is purposely tight so that it doesn't wobble while in use.
This is a remake of Williams' moving 5 target bank guide rails. This rail part is what breaks in use, yet the it's not available as a separate spare part, the official part includes the targets themselves and their back plate. The target…
This is a remake of Williams' moving 3 target bank guide rails, based on my original 5-bank version. This has been modified by Hopeakuula regular RIK and is released here with his approval. This part is used in a lot of games, Who Dunnit…
Pinball Williams Fire! Keychain
This is a modified, from scratch design of Road Show pinball machine's locking pin. The collar at the end of the part typically breaks, which either causes the return spring to jam the part or the part just goes too far for the coil to be…
