341 modeli
A funnel that fits the windshield washer fluid reservoir for a 2016 Volkswagen Golf (and other VW/Audi models). Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Random Perimeters: 8 (avoids top and…
Wydruk około 3,43 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cone Shaped Windshield Ice Scrapper. Designed in blender with help from StableDiffusion for creating Greyscale depthmaps of crystals.
Wydruk około 13,96 €–17,06 € nettoWstępna wycena jednego wariantu
This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Are you as stupid as me, breaking your windshield fluid cap on your precious model 3? And you don't want to spend big bucks on a piece of plastic that costs less than a euro/dollar to produce? I broke mine, and I was quoted 100 euro for a…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
One of my first practical models. I printed from PETG and it has worked perfectly for more than two years. Uploaded model of windshield is without picture of the biker. For assembly you need (windshield with the holders) 2x Allen screw M6…
Wydruk około 15,71 €–19,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is just an experimental thing I came up with, because even with thin gloves, my thumb on the throttle soon got cold due to the wind in colder temperatures. So here is a thing you may want to try. It simply snaps on the standard 22mm…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Easy to print in PLA but PETG will work as well. I recommend to get two little longer M5 screws (pic No. 6) to mount the AirTag holder with the factory mounted plastic cover in between handlebar and windshield. It works with the original…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
This is just a simple remake of the official support. One of mine melted due to extreme heatwave and the second one broke on a bump. Decided to design them in Fusion360. I made them a bit thicker. 5mm instead of the default 3mm. Added a…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So the windshield wiper motor on my 24-year-old Ram pickup packed it in. Chrysler is somewhat notorious for the poor aging characteristics of their polymer parts. . . . And, of course, getting to that motor --especially when you're late,…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet A tough, reinforced ice scraper designed specifically for car windshields . The geometry focuses on durability, comfortable handling, and reliable performance in freezing conditions.…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
Wydruk około 7,01 €–8,56 € nettoWstępna wycena jednego wariantu
Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into. the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm I recommend printing in petg funnel down on the build plate with no…
Wydruk około 5,32 €–6,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple lid for the watertank of windshield wiper fluid/water for citroen picasso C3. Has a loose fit, but its held by a string so the lid cannot fall down and disappear like the original one:-)
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ice Plough that can be extended. The plough keeps the ice spray from hitting the hand. There is also a end that can be screwed on. The Size of the model: Handel is ø25mm and 132mm long without end cap. Handel is ø25mm and 130mm long with…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ULIMATE Print Bed Scraper/Windshield scraper wide and narrow versions! print at 0.16mm layers or less for best edge. Don't forget to- like share print and follow!
It's kinda awkward to pour in fluid under the frunk, so hopefully this will make it easier. It fits really well, snug but loose enough for guaranteed fit by any printer. I drew a compact washer fluid funnel for Tesla Model 3 using…
Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…
Introduction Refilling windshield washer fluid can sometimes be a mess, but not anymore! This funnel is designed to be used when refilling windshield washer fluid with minimum waste of washer fluid. Features Handle: This funnel has a…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
This is an OpenSCAD (https://openscad.org/) script to create a replacement windshield washer hose clip for a 2018 Tesla Model 3. After 5 years in the Phoenix sun, the plastic clips that hold the washer hose in place on the wiper arm broke…
The funnel was designed to fill the wiper water. To avoid stringing during printing, I recommend printing the funnel only with wall lines (vertical shells 5 lines). Der Trichter wurde zum auffüllen von Wischwasser entworfe. Damit das…
Fitment: This part is for conventional wiper blades and hook type wiper arms (refer to diagrams): Printing: Material PETG or better (needs to withstand outdoor conditions and heat) Nozzle 0.4mm Layer Height 0.2mm Infill Density 100%…
30-40% infill is recommended. Bump up to 4 perimeters as well to fill the walls. Organic supports does make it easier to remove, but regular grid works fine as well. A remix of a model uploaded by Pavel Mironov on Thingiverse. The…
I was not very happy with the stock windshield of my Royal Enfield Himalayan. It created turbulence right where my helmet is, making my ears ring and my neck tired. Realizing that removing the shield altogether was a great improvement, I…
Replacement cap for my reservoir on my 2014 Sierra. I printed mine in TPU for flexibility.
Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version without the nitty gritty small details. Test fit showed a good tight,but not too tight fit. edit: 9.3.2018 - added a version…
Since my cap for my windshield washing system was distorted and didn't fit anymore, I designed this model. It should suit all Clio III models, but I'm not sure. I'm driving a Clio 3 GT, 2009, sold on the german market. Material:…
Five years ago, I faced a broken windshield washer cap in frigid Canadian weather. Frustrated with waiting for an OEM replacement, I designed my own. I've desinged a range of caps for various Ford vehicles. Tested on multiple models,…
I designed a new one to replace the hose connection piece that broke and caused the washing jets to become unusable. It was made in similar dimensions and its interior was designed in accordance with the original to ensure equal water…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG. Fits E30, E39, Z4, and other models. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
This model is meant to be printed on it's side with build plate supports at a 0.1 or similar layer height. After printing use a small drill bit to clean the inside hole and also sand the outside surfaces to make the hose fit better. I…
funnel for ford focus 2 (windshield washer fluid) or other with hole bigger than 32mm. Printed with PLA (use brim, no supports)
A remix of Thelguana's design intended to be printed in TPU (or other flexible filament). I added a retainer strap with loop that fits over the neck of the reservoir opening. I also added a logo to indicate what the cap is for. I printed…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Fiat Ducato Windshield Washer Tank Cap Printed in TPU, no Support, 20% Infill
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…
Hier hab ich ein Paar Scheibenwischer für den Ford F350 von Tamiya. Der linke ist etwas stärker abgewinkelt, der rechte etwas flacher. Here I have a pair of windshield wipers for the Ford F350 from Tamiya. The one on the left is a little…
UPD. Infoced the version with icon. Designed a suitable and improved windshield washer reservoir cap model for BMW E30, instead of the one published by Exotechd. His design is very beautiful and concise, but unfortunately, it doesn't fit…
What you see here is a set of windshield wipers with a license plate carrier meant for Trx TRX-4M Defender. These just clip onto the windshield frame. With this design there are more nails hit - wipers are 1 model, easier to print and…
The cap holding the actual rubber blade of the windshield wiper broke off mid drive so instead of buying a new set of wipers (since the blade is still almost new) I printed a replacement. I printed it in PLA and later painted it black…
print orientation as it comes from the STL, ASA or ABS recommend for temperature stability
Print with TPU, 3 or more walls, 0.2mm layer
can be left next to car battery for everyday use. it fits in my octavia 3 Brim is nessesary!
This is a simple cap for M8 nut holding the windshield wiper arm. The print needs supports and I recommend using ASA or other high-temp and elements-resistant plastic. I've designed it for Skoda Octavia II (1Z), but should be pretty…
A replacement for Toyota FJ Cruiser windshield Wiper bolt cover. *Support not required *Print with heat resistance material Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.15 ~ 0.2 Infill:…
Print with some strong settings. I printed this with 3 perimeters, 50% infill, PETG, 0.6 nozzle. I printed it on its side (as seen in the picture and also add some supports to help keep it on the bed). When I used it, the plastic bent a…
Jeep JL Wrangler Front Windshield Air Diverter Improved airflow for the JL Wrangler front windshield to get corner areas that don't defrost or fog up. This model was based on the JK Wrangler diverter that was found on Thingiverse…
Windshield Washer Fluid Cap - With and without print-in-place hinged lanyard. Example in photo was printed using PETG 100% infill without support or brim to fit 1998 Nissan Frontier. (2.25 inch)
Subaru Windshield Washer Tank Cap 2018 Crosstrek
An adjustable quick-release mount for the Valentine One Gen 2 radar detector. Uses magnets to handle the quick release aspect: you have to rotate it out to get it out. Inspired by the DS1 mount (https://www.rdforum.org/threads/113691/),…
Edit: Updated model! Improved tolerances and added more rigidity. The cap of the rear windshield wiper of my car went missing a long time ago, I have now finally found time to design a replacement. Works for my Toyota Aygo AB10 from 2012,…
Replacement cap for washer fluid reservoir on a 2001 Nisaan Xterra
Remixed from https://www.thingiverse.com/thing:3769718/comments Modyfield construction, and working good ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: you choice…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Update: version 3 has cutouts on the side 2mm deeper. Use files from folder for version 3. wiper_stand_v3-Deep.3mf file has 3 instances printed sequentially by ASA fillament wih brim. Stands supports wipers little away from windshield, so…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
This is a replacement for the Volvo Windshield Washer check Valve. Mine was broken and I bought some replacements but they were not original. The original part has no stock. The ones that I buyed don't work well and I decided to design it…
Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
Clamp on Windshield Phone Holder for MGB or MG Midget NOTE: PRINT THE GoPro VERSION. It's just better. Also, I completely re-invented this mount from the ground up and that version is available here . I needed a special mount to secure my…
These little guys snap onto your glasses/sunglasses for extra cool factor. They should fit just fine on most plastic-rimmed glasses (see photo above) or similar. Print both the arm and clip parts with supports on, and after printing and…
I designed this for my F10 M5 and Escort Max360c radar detector, but I'm sure it will work on other makes and models along with most current Escort detectors. This allows you to tuck the detector up close to the roof right between the…
Ice scraper for car windshield with replaced blades. Print new blades as many as you want! Once the old blade wears out, there is no need to re-print the entire scraper, just print the blade only! For free available basic blade.…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Print the whiper in the given orientation. After printing, you need to brush the tip of the whiper with a smal lighter flame in order to make it soft. Bend it 90° to fit on the Armadillo
simple air guide for mounting on the original windshield holder. May help with booming wind noise by rear ventilation of the windshield. Due to simpler printability, the part must be adjusted to the curve after printing using a hot air…
Windshield cleaner water cup replacement. Print with TPU.
Windshield Wiper Cap for Kia Ceed
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Mine broke when i yanked the blade against the windshield in attempt to break off ice. Without that cap blade is falling apart, so i've made the replacement
This is a model for the hood hinge/ windshield cowl boot for the Honda civic EG and Del Sol. It has a superb fitment and I modeled a little channel on the bottom to install with no glue needed! Just slip it into place and you're done.…
With a cover and more solid. For Peugeot 107. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20mm Infill: 100% Filament: GIANTARM PETG Black Category: Vehicles
This is a replacement cap for your windshield wiper fluid reservoir. Fits the 2015 Mazda3, and probably many other models of cars.
I reverse engineered the original cap which was broken at the joint. I tested with PTFE and TPU. - PTFE has a better fit and look , but fatigue is untested. TPU fits well and will last longer. Print with 3 walls - 15% infill Supports…
For better strength and watertightness, use the following settings: Walls: 3 Layer height: 0.3mm Line width: 1mm (0.8mm should work for most hotends if 1mm is too much) Wall generator: Classic (Arachne doesn’t work well with this model)…
Wind washer fluid cap for the Honda Civic 2003
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
BMW R 1200 GS LC Windshield raiser (5cm) I printed it from PLA and tested one season with highways and many km of gravel roads. After the season the parts looked deformed (slightly bent) but I think they survived well in rough conditions.…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
-- EN version -- VAG windshield washer fluid reservoir funnel (Volkswagen, Seat, Skoda, Audi...), 40 mm diameter. Printing instructions: Print with 100% infill. No need to use support if printed upside down. If you like this item, you can…
Cap for tesla model3 windshield fluid tank.
Clips to support windshield washer lines on factory hood. Using small 4.5mm holes between the typical clip locations for extra support of windshield washer lines. Printed with 0.20mm layer height and 4 perimeters in PETG.
As requested by a Reddit user. Work in progress!
I created these to reduce the amount of wind buffeting I was experiencing at highway speeds with my 2017 Ducati Multistrada 950. I printed in ABS for strength. You'll need some M5 bolts/nuts/washers to mount the windshield. This does work…
wanted a discreet quick release for the windshield of my V85TT, so i made one. It doesn't really get smaller than this without sacrificing practicability. A M6x40/50 hex head screw is required Print in PETG or ASA, the dust cap could also…
The perfect tool for cleaning every nook and cranny of your car windshield. Prints in under 45 minutes without supports and easy to assemble, using only 29g of filament. How to use guide : The handle clips in the plate mounts TIP : You…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
The funnel can stay on its own and prevent the spillage of the windshield washing fluid over the electrical equipment. I printed it on ABS, at 0.28mm resolution and 25% infill
Windshield washer fluid reservoir cap I made to replace the ugly blue ones that come on the cheap aftermarket reservoirs on Amazon. Similar to this one:…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
This is a 3D printable version of our metal wind deflector kit for the Himalayan BS4 (2019). This kit will replace the stock windshield, which often cracks at the fastener holes after some period of time. It is strongly recommended to use…
The nozzle at the end of the windshield washer fluid pump broke on my Trabant. This is were the hose connects to the pump to send the fluid to the sprayers and spray the windshield. The pump still works just fine, but with no hose…
The original plugs that connected the drain tubes to the bottom of the windshield started to deteriorate, letting water, insects, and small animals into the engine bay. I took some time to design a replacement. It is best to print this…
This is windshield washer water tank cap for Hyundai Getz and Accent Era. The sample photos were taken on a 2010 Hyundai Getz. I changed the size and the connection part for easy opening and closing of a generic model I downloaded months…
This is a model of the specialty trim clip for Honda del sol (and maybe other models) that holds the windshield cowl gasket and cowl on. Print in either PETG or TPU. PLA might work but it will likely break so I recommend stronger more…
