7879 modeli
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.
Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
Wrapping paper cutter for easy paper cutting. This is better than bothering with scissors. Model is programmed for a 9mm wide knife. →…
Dragon on Egg: - Found a free Version of this mesh and Fixed for 3d printing. Also added UV textures to mesh. Sometimes the only way to fix models is to subdivided the mesh till its well over 3million tris and then go thorough the process…
Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
I designed this set of wrist rests for your Keyboard and Mouse. The keyboard wrist rest is designed as a split pair. I tend to swap out my keyboards between several different styles (standard, split, Alice, etc.) so having a wrist rest…
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
This isn't the first 3D-printed object made in space, but it is the first created to meet the needs of an astronaut. When International Space Station Commander Barry Wilmore needed a wrench, NASA knew just what to do. They "e-mailed" him…
Esta peça esta no formato para Canhoto é necessário realizar o espelhamento para ser utilizado por destros. Utilizei as seguintes configurações na minha impressão: Preenchimento: 30% - Giróide Suporte: Sim (arvore) - Coloque a peça de pé…
Intro If you're cursed enough to live in North America, you need two wrench sets. I like the ideas of having both sets arranged in some kind of symmetrical fashion on my wall as in the picture (therefore resulting on asymmetric holders).…
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
I´m sure you all have tried it, getting through half of the box of plasticwrap, then the cardbord box starts to fall appart. So here is the solution. It works with plastic wrap and tinfoil. The only thing you need is, the saw blade from…
Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…
Easily printable wrist. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelné zápěstí. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament PLA…
Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.
A functional study model of an intriguing wrist joint as seen in a brief Hackaday article about a dextrous robotic arm from Korea. https://hackaday.com/2019/10/20/humanoid-robot-has-joints-that-inspire/ I printed it in three colors for…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
This is a model of the Nuphy Air 75 wrist rest that is almost identical to the one listed on the website. The outside dimensions are the same with some liberty being made with the dimensions of the decorative cutout in the middle. The…
After I had printed the NASA space wrench in PETG, I realized that the wrench is actually tougher than I thought. I put a metal socket on it and it felt like it could really be able to tighten some screws. Since I needed something to…
Printer Nozzle Torque Wrench designed by Anders Olssen. Not only for ruby nozzle:-) *update 17.9.2022: Added the correct PETG GCode-Files
Sometimes the Revo nozzle is a little difficult to remove by hand and I didn't want to take pliers to the nice sock, so I designed this simple wrench. Please don't use it to tighten the nozzle – it isn't necessary and I don't want to make…
Original wrist rest design for the 3DConnexion SpaceMouse®. The ‘scales’ are printed as seperate parts and friction fitted to the main skeleton part. I also included a g-code version for the skeleton and scales on one plate. I included…
Here' a fully configurable hook wrench similar to DIN 1810 Form A . Form B would have a pin as a hook and is not contained, but Form A is ideal for 3D printing . This time the difficulty of the part needed me to use Onshape. Unlike the…
Print settings: Everything is printable at 0,2mm layer height and 15% infill. Supports aren't needed. I recommend printing this model with multiple colors. You can use my TitanicWreckage_part2_multicolor file for that. Assembly: Glue the…
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
Hi all lovers Easters time I created an Easter bunny wreath, for everyone who loves Easter. Ideal for decorating your front door. I hope you will like the model and it will decorate your home. Happy Printing :-)
Snake Wrapped Around Crystal Ball
Wall Art silhouette model of the Jeep Wrangler 392 XR. Adjustable size. I accept model suggestions or ideas you have.
Hi, I made a wrist rest for my mechanical keyboard at work. I didn't want to buy a new wooden one for 20€ or more. I printed mine in PLA with two colors. The openscad file is also available. So you can change the form, lenth and depth as…
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
Gel heart-shaped shaped wrist rests are often used with split ergonomic keyboards because they are accessible and relatively inexpensive. This print wraps around the gel rest and allows for tilt and height adjustment using M6 screws and…
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
You must put a pause(M600) at 3.80 layer height and insert a 5 euro cents coin. (Otherwise after printing finish isn't possible to insert the coin properly…!)
Closed case for a esp 32 wroom (30pin) board without PLS connectors The case has a lid that snaps into place. There are special bumps on the lid that fit the buttons. The case also has cutouts for USB and LEDs.
Wargame Walls Wrecked Barrels Section 18 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…
Print with 10-20% infill and 0.2mm layer height. No supports needed.
Print settings Material : ASA 0.15mm layer height 4 perimeters 20 percent infill 10 top and bottom full layers supports needed Strap: 20mm backpack strap Note: licence is the same like original model.
With ironing and colour switch for 2 white layers in the middle make a white rectangle prepared to write description with permanent marker pen. No paper sticker needed.
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
Track cleaning made easy: with the Carrera Digital 132 tow truck and the printed parts, simply stretch a cloth around the platform and take a few relaxed laps... Modelled on the original Carrera track cleaning truck "Entdrecker". -----…
A small decoration for the floor of your aquarium.
Prusa's timekeepers contest [ https://www.prusaprinters.org/contest/11-timekeepers ] and a little extra time off due to Memorial Day [ https://en.wikipedia.org/wiki/Memorial_Day ] presented an opportunity to revisit my sundial wristwatch.…
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
A compact and functional holder for hex keys, optimized for the most common sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm. Each slot is clearly marked with the corresponding size, so you can quickly grab the right tool. Perfect for the…
A simple wrench to help turn the locking pins for Maxtrax mounts. Print instructions You have two options: Use the pre-sliced G-code Slice it and use the following settings**: Print settings: 0.15mm QUALITY Filament: PETG Infill: 30%…
This print is used to help organize the super long cables for the Valve Index Basestations (SteamVR2). To use, detach the cable from the brick, slide the brick into the model, reattach the cable and wrap around the brick, finally plug in…
5mm hex key/allen wrench for locking and unlocking or dogging and undogging pushbars on doors. At least that what I needed. Maybe you just need a 5mm allen key on a keychain. Who am I to judge. If you're using this for doors, there are…
I made this wrench for my wife to use on milk jug lids and Arizona Tea jugs. It is completely customizable so you can make any specialty wrench you need, such as water bottles, RO filters, etc. Features Double ended wrench Single ended…
REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…
Find 3D-Printed RC cars here.
Print in PETG for best durability results or order from my shop . Based on the bullet point mounting solutions metal dash mount for 2024 Jeep Wrangler. 50% infill minimum. Improvements are shown with higher infill. Highly recommended to…
Small quick-print socket wrench with finger-sized handle for 1/4" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…
I successfully printed this on the first try. Here is what I did: Unmodified PRUSA MINI Overture Matte Orang PLA 200 at
A small, simple standee for the Battlement Tokens. Allows for greater visibility while occupying less space in the region. Recommend Prusament Oh My Gold (Blend) PLA to match the Archwright Hero Board.
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I designed this tool to calibrate the genial "Torque Wrench Handles from 1.0Nm up to 3.0Nm" There is such a tool showed on the fotos, but no file for it added.…
Crafted with a honeycomb structure, this wrist stabilizer offers exceptional strength and durability while significantly reducing its overall weight. The honeycomb design not only ensures optimal support but also allows for better…
This tenting kit for the Keychron Q11 lets you attach wooden wrist rests to your keyboard for better ergonomics. To attach the wood pieces to the tenting kit, you need to drill some slots into them that match the pins on the printed…
Before installation can be equipped LED in the headlights: I printed the models "Front light - left.stl" and "Front light - right.stl" with holes 5 mm (corresponds to the size of my LEDs). I respect the model license (model purchased on…
Corvette Logo & Writing keychain
Leisure Suit Larry. Lawernce Laffer.
Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…
Subaru logo & writing that i made because i love cars
The wrench has a nominal value of 20mm and the actual opening of 20.00mm as well. For the best results you should take into account your printer tolerances and have it properly calibrated. The wrench thickness is 7.4mm. Use 100% infill.…
Dies ist ein montierbarer Schlüsselhalter für Flach-Ringschlüssel in der Größe 6-22. Das Grundgestell und die Zahlen können einfach in verschiedenen Höhen mit verschiedenen Farben zur besseren Sichtbarkeit gedruckt werden. Der farbwechsel…
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
Wrench (key) for air valve on paddle board or other inflatable things.
Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…
I tried different wrench holders and found none of them satisfying so I made my own. Fits 8 metric box wrenches and hold them in place, the right thing for my tool box or drawer. I made also a model for combination wrenches . Happy…
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Pool / Water filter wrench Print with 4 or more perimeter and about 20% infill. Innerdiameter 95,5mm Outerdiameter 99,4mm Step files included
Oryginalny projekt bez podpór został powiekszony do 430mm i podzielony, aby wydrukowac go na drukarce Ender 3 v2. Dla ułatwienia połaczenia poówek zastosowałem 3 ‘klucze’ w formir walców, wchodzących w otwory w obydwu połówkach, co…
This model comprises two parts that can be printed together. The g_code is from my Creality Ender S1 with default settings. If you want more control slice your own from the two .stl files. I used standard PLA filament The two parts will…
This model is the perfect tool for cutting Christmas wrapping paper. It is a small pocket sized cutter that is less fiddly than scissors because it doesn't go under the wrapping paper. It can be printed in PLA and is very sharp so be…
Stable Triple Watchstand for wrist watches. Printed on the Prusa mini in Mat Black PLA. Both STL. and g-code attached
Nissan logo & writing that I made because I love cars
I wanted a way to make better use of the space in my toolbox so I created this combination wrench tool holder. I left enough space between the wrenches to be able to get them out easily. The wrenches are Challenger/Proto. This is part one…
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
The Jolly Wrencher logo from Hackaday, as a magnetic badge. There is a pocket for a 5x3mm magnet on the back. Thanks to Michel for the model this is based on! I found the original difficult to print so that it had a satisfying coverage of…
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
I needed a method to mount the grinder wrench and the nut beside my grinder when not in use.
neodymium magnet 60*10*3mm 8pcs The magnet I bought was slightly smaller than spec and I put thin painter tape on each side to fit in square cavity. These magnets can connect with frames or Q11 directly and steady. rubber foot 24 pcs…
Candle holder which consists of two parts which can easily put together, so there is no need for support structures. The nail can be filled with a Ø 2mm x 50mm rod, so it gets stable. Category: Decor
frame and wrist rest for Keychron K3 Pro. M3 nut 1 pcs, M3 8mm screw 1 pcs, rubber foot 4 pcs 60*10*3mm neodymium magnet 4 pcs. painter tape
This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…
check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384
I made it myself because I love cars
Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.
