Wyniki wyszukiwania: xe

Low Poly Howling Wolf 2.0 (Decoration)(No Supports!) FIXED

Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394

Articulated Spirit Dragon (FIXED, rugged, blunted, Alt HEADS!) - V9.5

*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…

Prusa MK3 / MK3S / MK3S+ - SideBoxes for some Tools

A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…

Drill Paint Mixer

Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…

Axe for Dummy 13

This is a one handed axe for Dummy 13. It is about 19x59mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile…

Low Poly Dog (Golden Retriever Labrador) (Decoration) (No Supports) FIXED

The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958

Wave Puzzle 7 (Remixed)

Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…

Battle Axe for Dummy 13

This is a two handed battle axe for Dummy 13. It is about 80x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my…

Freezing Pixels - Infill Drink Coasters - Set of 12

A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…

Paint mixer - 100% printable - no support - optimized orientation

Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…

Stackable boxes

my remix stackable boxes for anything PLA,PETG,ASA

Customizable pixel box on desk v2.0 - different sizes

Hi everyone again! Thank you for a lot of ideas, comments, feedback and downloads of my (silver winner in design contest ): v.1 Pixel Box project ! I'm so sorry you that you had to wait so long, but after a loooot of working, testing and…

LCD + Hyperpixel 4" touchscreen cover

LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…

Remixed BIQU H2 mount, BLTouch and fan shroud

This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…

Google Pixel 7 Case Slim Fit

Edit 06.05.2023 : Added STL with 0.2 tolerance on all dimensions I couldn't find a pixel 7 case thin enough for my taste so I decided to model one (with my very limited ability to do so). There is two versions, one flat around the screen,…

DIY Systainer Cleats for Festool/Tanos T-Loc Toolboxes

Note: I did not make this model. Just reposting it from here . All credit goes to 123one . Use this 3D Printed Cleat set to attach plywood (or almost anything) to the top of a Festool / Tanos T-Loc Systainer creating a mobile work…

Flour Funnel for KitchenAid stand mixer

Happy Thanksgiving - Make those Holiday Recipes with ease with this Easy to add dry ingredient funnel to your mixing bowl while the mixer is running (or not). This offset funnel has a tool accessory post to mount onto the KitchenAid…

Cupholder for Citroen Jumper, Fiat Ducato & Peugeot Boxer

This is a drink holder for the Citroen Jumper, Fiat Ducato & Peugeot Boxer. The print area should be sufficient for most printers. (Diagonal printing) Function: 2 - cup holder 2 - pen holders 1 - Tray for keys or mobile phone Important:…

Low polygon Egyptian Cat - fixed orientation

Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…

Mixed Filament Type Test Print

This very simple test print was created to try out an idea for making ink stamps. Short version : Test of a method for printing with two different filament types - in this case PLA and FLEX. The photos show a test disk with gray PLA and…

Snailien (snail-alien xenomorph mashup) lawn ornament

This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…

Foldable Phone/Tablet Stand (Remixed for large phones/tablets)

This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 for Octoprint and OctoDash Prusa for MK3s+

LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…

Homer Budha (3mf ready to print byTIXEN)

Homer Budha .3mf Ready to Print by TIXEN FDM - with variable layer height and supports Sizes : 10cm Please, Print it! Share it! and let me know about any suggestion or any issues Contact info: Email: [email protected] IG: @tixen.ar This…

The White House - Executive

Repost of "The White House - Executive" by MakerBot ( https://www.thingiverse.com/thing:461235 ). It slices at 100% scale in Creality Slicer and fits on my Ender 3 without a skirt. I printed it at 50% scale at 0.2 layer height at 50mm/s…

LCD Cover for 4" HyperPixel Touchscreen

This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…

Google Pixel Watch 2 Charging Stand

This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…

Xebec Sailing Ship Gaming Miniature Compatible with DnD Spelljammer

A model of a Xebec sailing ship. This miniature is well suited for tabletop games such as Dungeons and Dragons. It comes with a version on a flying stand as well as a version with its bottom cut off to make it look like it's floating in…

Concrete Mixer

Put it on your table or make it mobile by using 4x lorenkrampe to mount it on G scale log car wheelbase ( https://www.printables.com/de/model/335862-log-car ) How to build it: Put gestell2 into the slots of gestell1. Push Schwenktrieb…

Modified Nintendo Switch Joy-con grip (remixed)

Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…

Freezing Pixels - Geometric Christmas Tree

A geometric Christmas tree, printed in vase mode! Nice to have on your desk during the dark december month! By removing the bottom layer you can easily put an LED string in like shown on the pictures. The peak is printed separate. Also…

Pixel 6 Pro Case

Printed with Flexfill 98A and paint-on supports for the cutouts. The “_rigid” model files have a 1mm smaller top lid to make putting the cover on easier when printing with a non-flex filament like PLA. 06.11.2021: Updated the model with a…

Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5, MK3.9 & MK4, MK4S - MMU Not Required)

24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…

Vuitton bag flower pot modified/remixed with bigger space inside and a drain hole.

Can be printed without support

Epoxy or Paint Mixer

I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…

Paint mixer

Cut appropriate length of M6 threaded rod or smooth rod with 6mm diameter. Make sure the rod is straight, otherwise everything will be wonky. You can simply screw the mixer on the threaded rod, with a smooth rod you might be required to…

Modular hexagonal boxes - drawers

These are modular hexagonal drawers that can stand separately or can be mounted using a holder under the shelves I know that there are many similar projects (especially "The Hive" project inspired me), but none of them fully satisfied me.…

stand luxe xr max vaporesso

English I made this model for my Vaporesso LUXE XR MAX there is a slot to slide the usb C cable inside, for the cable I used a usb C fast charge from Xiaomi (it is possible that it is a little bigger than the ordinary ones) you can pass…

Remixed Double Hook 3m Command Strip

A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.

Butterfly training knife fixed (Butterfly Comb / Balisong Comb)

Butterfly knife blade (Butterfly Comb / Balisong Comb)

Remixed Wooden Train Track Bridge

MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…

Freezing Pixels - Small Geometric Flower Pot Set

A set of three different geometric flower pots, ready to print in Spiral Vase mode! Large: 13cm Medium: 10cm Small: 5cm Print instructions Best printed in prusament galaxy black in Spiral Vase mode 0.2mm layerheight!

Radiomaster BOXER Gimbal Protection

Protection For Radiomaster BOXER Controller Gimbals

Fanatec CSL DD Smartphone Dashboard for Google Pixel 6a and other Phones

This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…

Airbrush stencil ST-CAM004-pixelated-modern-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Half height Systainer Organiser Boxes

To store small parts, a half height 50x50mm box may be more convenient than a full height 50x25mm.

KitchenAid Mixer splash guard

I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…

Pixel Watch 2 Stand

This is a simple charging stand for the Pixel Watch 2. The charger fits snug without any glue. Print with some supports on the front.

Little beton mixer truck - Malý domíchávač

[EN] Sometimes it happens that a visitor comes with children who are bored and need some entertainment. In this case, simple and easy to print toys come in handy, where the child will have fun both watching them print and playing…

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Christmas gift boxes - super fast (vase mode) with slide-in lids

Three gift boxes to chose. Print both pieces in vase (spiral) mode. Use enough bottom layers to form 1mm solid base (i.e. 5 layers for 0.2mm layer height). Use 0.8 - 1.0 mm line width (this is External Perimeter parameter in Prusa Slicer).

Ranger's Apprentice Saxe Knife (version 1)

This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The Saxe Knife has a…

Fixed belt clip for Baofeng UV-9R radio

This is a fixed belt clip for the Baofeng UV-9R radio that is compatible with MOLLE/PALS webbing. The original clip is a rotating design that isn't suitable for some applications . This clip snaps over the lanyard attachment on top and…

Mini game: Mini bow (fixed bow)

In the original model, when the bow was stretched hard, the rubber would come loose, so I made a revised version This is what I changed in order to keep the rubber on the bow.

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Rack ear for Zyxel XGS1210-12 switch

This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…

Ultimate Concrete Mixer Truck

I wanted to model a somewhat cartoonish version of a concrete/cement mixing truck. They're my favorite kind of trucks. FEATURES: Fully printed bearing wheels (they are very loose but they roll and spin!) Handle for spinning the barrel…

Hyperpixel 4 Touchscreen External Lack Enclosure Frame Prusa MK3S

Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…

Transformers Devastation Starscream Conversion Kit (FIXED FILES)

Original file located at: https://www.toymakr3d.com/product/12-jet-squad I wanted to print up the mod, noticed there were missing mirrored objects, colors weren't sorted into proper folders for new (aka the white should really be a light…

Small Audio Mixer Stand

This is a a stand I built to elevate a small 12 channel audio mixer, Behringer 12 XENYX. If you print this using the stl files, you will need to create two sides with one mirrored. Don't worry about cleanup, the little bit of elephant…

Paint Mixer / Stirrer

Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod

KitchenAid Mixer Card Holder

This is a remix of deslucht's KitchenAid Model, separated parts on Thingiverse: https://www.thingiverse.com/thing:4705694 . The print file is arranged to enable a filament color change. Unfortunately this orientation uses more supporting…

Credit Card Boxes

These are convenient boxes to store your credit or other plastic cards. They have a sliding lid mechanism for easy use. All of them are printable without support. There is an older, more robust version (V1) capable of up to 12 cards The…

Spray paint can mixer - shake those aerosol rattle cans easily!

Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans. Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like…

Hextraction Bomb Tile - FIXED

Tile for 3D printed game, Hextraction. Remixed from Zach Freedman's model, which has the unintended consequence of the center star acting like a ramp instead of allowing the model to trap the balls. In my remix, I changed the star from an…

Kitchen Aid Stand Mixer Attachment Holder for Wire Rack Remix

ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…

1/2 Insertable Bins for AUER PACKAGING Assortment Boxes

The System These containers are designed for the assortment boxes from AuerPackaging. You can find them here: https://www.auer-packaging.com/de/de/Sortimentsboxen.html My Printtime The bins are designed for a 0.4 Nozzle. I recommend…

Remixed Escher Style Starfish Tessellation

I love the model by @RobertSoto_503356, it is a real work of art. He mentioned that he needed to print a portion of them in TPU to do the assembly. And they needed supports to print. So… I thinned the shell and filleted the edge to make…

Original Prusa Enclosure Mesh Side Boxes for MK4

The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…

Stan Lee Memorial Print Remix (3mf Ready to Print by TIXEN)

Stan Lee Memorial Print Remix (3mf Ready to Print by TIXEN) This is a REMIX from: https://www.prusaprinters.org/prints/1439-stan-lee-memorial-print made by Hex3d https://www.prusaprinters.org/social/4304-hex3d/prints .3mf Ready to Print…

Zyxel GS1100-16 v2 10" Rack Ears

I couldn't find any other designs that could fit this switch so I made my own. This design is for the v2 version that has 3 holes in a triangle pattern. The v3 chassis of the switch has 4 holes and looks slightly different. Check the…

Spiral Executive Toy

Simple but addictive toy. Turn it over and the ball runs down. This model is designed to have no supports to enable the ball to be placed inside during printing. The ball is encased and will not come out, without breaking the model. This…

Parashift: cable travel adapter for mixed shifting

Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…

Bosch Sortimo L-box 102 Insetboxen

Hier einige druckbare Insetboxen für die Modellreihe 102 Generation 4. Deckelstyropor muss vorhanden sein. MfG

Remixed Temperature Tower for Elegoo Neptune 4

Extruder Nozzle : 0.4mm Layer Height : 0.3mm First Layer Height : 0.35mm Top and Bottom Solid Layers set at 3 Seam Position : Aligned Seam Gap Distance : 15% Scarf Joint Placement : Nowhere Perimeter Generator : Arachne Fuzzy Skin : None…

Marceline's Battle Axe Bass Guitar

Info Grab your friends its another Adventure Time print! This time its Marceline's epic battle axe bass guitar. I am working on a full epic version of Marceline, but I thought I would upload her bass now for those interested.…

Fixed Prusa MINI+ Printbed Camera Mount - Correct Hole Position

John's printbed mount is great, except that the screw hole isn't aligned correctly with the bed's bottom-right corner. I only included the modified bed mount and the original camera housing. For the ribbon chains and full instructions,…

Seed germinator & plant greenhouse using Ferrero Roche boxes

In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…

Spüle Erweiterung Deluxe / Sink Extension Deluxe / Drainer / Kitchendrainer / Ablage /Cutlery

UPDATE 01.03.2022: Alternativ für gerade Oberflächen habe ich noch die vier Fußteile abgeändert und hinzugefügt. Zusätzlich habe ich noch Befestigungsklammern für den Korb hochgeladen für zusätzliche Stabilität. Alternatively, for…

Storage boxes for PRUSA MINI

Short and long version of side-mounted and under-bed storage box for accessories for PRUSA MINI with a flexible insert. Both versions can be placed on the left side of the printer or under the bed on the right profile. Because I use…

Parkplatz Schild Hexe Besen

Lustiges 3D-Schild für Hexenfans: „Besen – Bitte hier parken!“ Perfekt als Halloween-Deko oder witziger Blickfang an Tür, Wand oder Eingang. Einfach zu drucken und ideal als Geschenk oder Dekoidee für Zuhause. Es ist ein Mehrfarbdrucker…

Print-in-Place miniature box V1: fixed subdivision

Rotating Round Boxes - Print in place - NoMMU

Rotating round boxes with a simple lock to avoid that it opens accidentaly. Ideal to put your spare parts, daily candies or anything else. Normal Box size : 67mm Small Box size : 50mm Opening : use one hand to hold the outside of the box,…

Connectable Vase mode Hex-Boxes with Lids

I really like the model by “ Matt C " but I didn't want there to be any way material from one box could fall into the next one over through the connectors. I also didn't want to have tabs sticking out on the exterior edges that weren't…

Beasts Axe

Beasts axe. Full Beast Model Found Here. https://www.printables.com/model/823218-beast-beauty-and-the-beast

Shrek/Ogre with battleaxe mini

The perfect miniature for your next adventure. Either as NPC for a DM or as PC for any player. I would recomend halfing the print speed, like I did in my print file, for a better looking print. Update 22.12.: I added a Version without the…

MMU Crash Bandicoot TNT/Nitro AA Battery Boxes

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker MMU Crash Bandicoot TNT/Nitro AA Battery Boxes. .3mf and…

Hello Kittie Pixel Keychain + Your TEXT / Brelok Hello Kittie ala Pixel + Twój Tekst

Hello Kittie Pixel Keychain + Your TEXT / Brelok Hello Kittie ala Pixel + Twój Tekst Below are videos on how to edit the TEXT on the back of the keychain and make color layer change. How to ADD any Text to your STL file (keychain) in…

Elegant Voxelized Planters

Get ready for spring and summer gardening with our colourful Elegant Voxelized Planters! Recommended settings: 0.2mm layers 10% infill Only the bottom part near the bed surface needs some support if necessary. Number denotes approximate…

Viking Axe 35cm

3D model of a Viking axe adorned with intricate ornaments, showcasing a blend of historical and artistic detail

Kitchenaid Hand Mixer Whisk Attachment Handle

I had a bunch of these whisk attachments left over from past hand mixers. This print turns them into normal hand whisks. Print them in PETG if you plan to put them into the dishwasher or use them to mix hot liquids. They have internal…

DJ Mixxer Controller

It is a keychain for DJ or others

Pixel 9 Pro Moment T-Series Lens Mount (Ringke Onyx Case)

Print at normal speed with a dark color PLA. Light can pass through white PLA and cause lens flare. The file has the correct orientation, print w/ organic supports. Will require some very light sanding. This may fit into other cases that…

Parts organizer dividers for Akro Mills, Stanley, Craftsman organizer drawer storage boxes several sizes

Here are several different kinds of parts organizer drawer dividers. They're listed as Width x Height (in mm) to make it easy to find the ones you need. They fit a variety of manufacturer's bins, including Akro Mills, Stanley, Craftsman,…

Bitaxe IceTower Adapter

A simple adapter to mount an IceTower cooler to a bitaxe. Print as oriented 12 walls minimum Feel free to use this adapter commercially, as long as you don't sell the files.

Chubby: Relaxed Tensioning Lever for Creality Extruders

Creality single-gear extruders, especially the metal ones, come with a very stiff spring and sometimes can, even on their minimum design (screw all the way loose) and true minimum (cap removed) settings, badly deform softer filament,…

Super Deluxe Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…

Fader Knob Cap for ReVox Studer C279 Mixer / Mischpult Faderkappe

Depending on the precision of your 3D printer, you may want to select a different version. For me, version 24 was the best fit. Cap1: 8.05 x 2.20 mm Cap2: 8.10 x 2.20 mm Cap3: 8.15 x 2.20 mm Cap4: 8.20 x 2.20 mm Cap5: 8.25 x 2.20 mm Cap6:…

Cute Foxes, Fox two tails

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Cute Foxes for a forest diorama, or just for the play. Very nice animals. It is suitable for coloring. My children absolutely love it :-). One fox is a…

IKEA Jonaxel Mesh Basket Hex Wall

Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.