Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 480
- Polubienia
- 65
- Ocena
- 5
532 modeli
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed using Fusion 360 from the original clip. I then printed a prototype that fits and works perfectly from the first time. It's now installed on the wheel-way trim of my Hyundai Kona I printed it in PETG using standard PrusaSlicer…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found this nice model here in Printables https://www.printables.com/model/886832-subaru-wheel-lock-storage-box from zymurgtechnician and adapted it to my need Locks and key from my Kona seems to be a bit bigger than the Subaru ones. So…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model of the newly announced N Vision 74 hydrogen/electric hybrid racecar by Hyundai. The wheels spin, it's full of details and it doesn't need any support material when printing! If you have issues printing any of my designs,…
Hyundai car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
This model is a remix of: https://www.thingiverse.com/thing:5251321 Scale about 1/10. I did following changes: I fixed the model so it's 3D printable Attempted to turn the model into european version: removed trunk lid handle added dual…
Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
I could not find a Hyundai logo of proper quality, so I created one myself using a seemingly official drawing of it that I found on the Internet. I like the result. The logo is intended for use in your projects, so it's not a "thing", but…
Sun visor clip for a 2010 Hyundai i20. Will probably fit other models but I have no idea. I believe this to be to part number: GETZ 8523505100OM 85235-05100OM Best to print in PETG, ABS or ASA for heat resistance. A car's interior can get…
I recommend printing my improved version: https://www.printables.com/cs/model/654548-improved-seat-tracks-cover-for-hyundai-tucson-nx4- Layer height: 0,15 mm or lower Supports: yes, organic supports works great You'll need to print two…
This piece works on 2009-14 Kia Sorento, but has been reported to possibly work with 2015 and 16. May work on Hyundai Santa Fe 2014-15. I clipped off the raised center of the vane it fits on. The clips with the tab down and on the right…
Lets face it, as the wireless charger is crap in the Ioniq 5 I modeld / remixed an magsafe mount for the bottleholder middle console. Here a small video about its fit, I think I will use some velcro to secure it a bit more I use the Anker…
Designed for 200x200mm Printbed, Scale to 150% for 300x300mm. Print in Translucent PETG and add some LEDs for use as a lamp.
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
This is a Hyundai Ioniq 5, a very cool looking car, I have made it 3d printable just for you. Happy Printing! Link to original model: Hyundai Ioniq 5 - Lowpoly - Download Free 3D model by andikapratamaw (@andikapratamaw) [675e783]…
Hyundai rim cap for your rims. Print in multiple colors to show logo
Hyundai Gyro Keychain
I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers. Update 3/14/23: I printed a piece to compare and my measurements…
ISOFIX Umbrella hook to fit Hyundai Tucson and Kia Sportage. Simple double umbrella hook that I made to fit Hyundai and Kia car models as all the ones I downloaded didnt fit. Hopefully this helps someone else. Just push down and it should…
dust cap for the headlight of a Hyundai Tucson. I lost one of the dust caps while replacing a headlight so i made this design to replace it. Print instructions There are 2 printable parts, 1 dust cap and 1 seal ring. I recommend to print…
Polyterra PLA Layers: 0.15 Support: yes
2024-10-03 - updated the license to allow commercial use of this model. I would appreciate it if you could buy-me-a-coffee if you find this model useful or profitable :) I got myself into a very well-known situation. You own a 3D printer,…
Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.
5 perimeters, 6 top, 6 bottom layers, 30 % gyroind infill. No supports. To be pressfitted/hooked in the slit under the rear seats release lever. Use thin (0.8 to 1 mm) doublesided tape to secure hook in the place. See image bellow where…
Replacement part for Hyundai Getz sun visor clip. Re-designed the small clip that broke with a sturdier design.
Wanted something to store sunglasses without scratching. I then stack 8 magnets (4 double stacks), superglued on. Printed mine with PA6-GF from Bambu labs, on an X1C. Inspired by:…
I took MKV's armrest storage box for 2022 hyundai tucson and removed dividers in the tray, added a pick up hole and rounded the edges. Thats all.
adaptation of the hyundai N logo to use it as a keychain
Update 27/11/2022: added a little version that is 20mm shorter. Wanted something different as a knob, so made my own. About 10cm tall and 3,6cm wide. Printed in eSUN ePA-CF for max durability. To replace the Knob just tug on on it (takes…
Designed in Fusion 360 after the official logo. When slicing, color change can be inserted for the shape on top! Enjoy!
This is a Sketchfab converted Hyundai Santa Fe 2024, the bumps in pictures do not show up on actual model. Link to original model: https://sketchfab.com/3d-models/2024-hyundai-santa-fe-61d49eecdf7648659c8f091e63dcfca9 Happy printing!…
Did you try to replace your lightbulb in your shiny i30 and find out that you can't get a good grip to unlock the lightbulb? Introducing the i30 Headlamp remover! The headlamp remover allows to get a better grip to the headlamp assembly…
Remix of MKV's console tray for the Hyundai Tucson but with additional dividers and a Santa Cruz logo added. Also added holes that serve as pull points to easily remove tray (center hole also serves as tissue box dispenser hole). Printed…
Hyundai ix35 trunk compartment cover clip
Print in horizontal orientation and with 6 Wall loops (100%) for strength. Should be printed with material that can withstand higher temperatures during summer. Support is recommended. Small pin needs to be inserted into the retainers…
This is a small riser to put in the phone cubby so that a straight USB cable can be used without it trying to bend the cable.
Designed for the i30N speakers. Some changes from the original model from Haba1205 (thank you btw..) Added some holes for wires and M3 screws. Maybe you have to drill them a bit. Also thanks to Hannes…
Vytisknul jsem několik modelů než jsem trefil správné rozměry výřezů a hran na kterých kastlík drží pod opěrkou. Sedí skvěle.
Ich wollte für meinen Kona Electric einen Einsatz für den oberen Becherhalter. Platz finden sollte der Schlüssel, Einkaufswagenchip, Ladekarte und Kleinkram In dieser Version passen bis zu 8 Standardkarten rein. In der “Blauen Version”…
Update 10/18/26: Here is a link to my Magsafe version - LINK Update 1/16/25: Refined shape of Dual Rings, now with a version including a USBc port for charging or lighting. Notes below. Update 12/9/24 : Dual Rings! and printed in ABS.…
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Hyundai Ioniq 5. Fits underneath the storage area in the console. My car has the sliding console, I am unsure if this will also fit on the fixed console. I…
Just remove the original damaged membrane with pliers and insert the replaced part.
Case for Hyundai car key. Print with soft or medium soft flexible filament. Support required. This model is one of the models I designed a long time ago and has been archived. If you are going to use the model, be sure to check whether…
What has been improved matches the look of the original cover much more sturdy better and more secure fit doesn't prevent the seat to be moved all the way to the front Print settings matte black PETG Layer height: 0,2 mm or lower 2 walls…
Tray for the drawer of the Hyundai Tucson NX4 FL (2025), designed for the Hybrid version with a steering wheel-mounted automatic shifter. I'm not sure if the drawer is the same for other versions. It fits perfectly, closes securely, and…
Voilà un logo Hyundai à imprimer en 3d, pour décoration 7cm de large, facile à imprimer
A newer Version of my N-Keychain. Edit the size like you need it.
Malý znak LOGO Hyundai na klíče
This print is designed to work without a MMU. You need silver, red and black filament. black: 0-2,2 red: 2,2 - 2,8 silver: 2,8 - 3 0.2mm layer height Printed it in PLA and this version survived for 3,5 years with heavy usage. Then I…
Repair gear for rear wiper motor part number 98700-3e000 987003E000 For cars Kia Sorento Hyundai SantaFe 88 teeth 53.6(7) mm diameter 10mm central shaft hole 7mm side shaft hole 5.45 angle
Dimensions are 91mm (L) x 141mm (W) x 43mm (H). Leaves plenty of room at the front to reach under to the bottom of the console.
6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
Roof Bars Cover on my Hyundai Kona 2022. One was missing so i recreate it as close as I could units use are in inchs
Intorior door handle for Hyundai Coupe/Tiburon/Tuscani GK 2001-2008 Copying the design and printing it was cheaper than buying a new one from dealer, so maybe someone else will have a use for it. For UK and other left hand driving…
This is a small under-dash storage tray for Hyundai Ioniq5s. It adheres to the bottom of the dash using VHB foam tape strips. It can hold small items like parking garage tickets, keys, nick nacks, etc. Edit: I've added a second STL that…
I remixed this because I wanted to mount the charger to a 4x4 post but the tabs on the original made the footprint too wide. I recreated this from scratch in Fusion 360 using the original as inspiration. Print Settings Printer Brand:…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and 3.90mm and use a prime pillar
Made to fit Hyundai Santa Fe badge, but should fit other by resizing. Some minor sanding might be required to make them fit perfectly.
Anyone who has tried to change the lowbeam bulb on their Hyundai Ioniq knows all too well what a pain it is to get out. Created this tool to slide onto the plug for the bulb, which allows you to use a standard 1/4" socket to remove it and…
CZ: Klíčenka s logem Hyundai EN: Keychain with logo of Hyundai
Ich habe hier verschiedene Hyundai Schlüsselanhänger designed. Diese können in verschiednen Farbvariationen gedruckt werden. Beste Ergebnisse werden mit einer 0,2mm Nozzel erzielt.
Experience a captivating blend of retro design and futuristic technology with this 3D printable STL model of the Hyundai N Vision 74. This sports car model is perfect for automotive enthusiasts and concept car admirers looking to showcase…
Enables a better storage usage under the center arm console. An extra compartment for EV charging cards is included. Print with PETG or ASA Support needed for the upper edge The .stl file contains a newer version form what is shown in the…
I needed a new brake pedal stopper for my 2013 hyundai sonata so I designed one and printed it. It is printed in TPU since the original seemed to be rubber, however I'm sure other filaments will also work.
Any Filament can be used I used PLA The 2nd Picture is from https://titan13toy.com/products/special-edition-2-0 :)
5 периметров, от 20% заполнения, печать как указано на фото и с поддержками древовидными. можно печатать с технологией нечеткой оболочки. //// 5 perimeters, from 20% filling, printing as indicated in the photo and with tree-like supports.
Dosenhalter für den i30N, Fastback N und Kona N für 0,33l Dosen. Mit diesem personalisiertem Dosenhalter verschüttet euch kein Getränk mehr beim Gas geben!
A phone holder add-on for the Hyundai Ioniq 5 (MY2021-2024) that sits behind the cup holder and should fit almost any regular smartphone. The phones sit angled so that they don't move around too much when accelerating / braking.…
Center Console / arm-rest latch 2017 Hyundai Accent Hatch - it will likely fit other models but has not been tested. There are two versions of the Handle. One that uses a brass heatset insert and one that directly threads into the…
I noticed one end cap was missing from the roof bars, so I created a new one. For a full set, four are required, two need to be mirrored
This is an aligment tool for centering the clutch of a Hyundai Tucson 2017 1.7CRDi 2WD MT. It can surely fit for other models. My clutch was perfectly replaced with this aligment tool!
I made this for my Super RS3M v2, but the STLs are fitted for a Dayan Tengyun's core as I had a spare one laying around. These are compatible with any magnets sized 3x2mm and I personally used N50s for mines. I printed this with resin…
A replacement for the stock seat recline knob in the Hyundai ix35. The original one in my car was getting janky, so I modeled a new one. It's comfortable to grip, holds up well, and you can print it in whatever color suits your interior.…
[EN] If, like me, you’re constantly bothered by your Kona’s onboard system because of an overly sensitive driver attention monitoring camera, you’ll love this cover that I designed using a 3D scan of the camera itself. The part is not…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
My 2007 Hyundai Accent was missing the hood prop clip, so the prop just dangled in the engine bay when the hood was down. Press-fits into the existing hole in the hood and holds the prop securely. Print in a heat-resistant material, it…
Many of the phone holders for the Hyundai Ioniq 5 either block the air vents or the screen. I designed this phone holder to slot into the unused space between the cup holders in the center console and keeps the phone in easy reach and…
EV charger support for Hyundai home plug charger. Easy to put and remove. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: None PET or PLA Blue Category: Automotive
I was unable to find a perfect cupholder expander for my Hyundai Palisade, so I made one. This one DOES NOT block the wireless charger, and you can leave it in place and still close the sliding cover. This is an easy print - no supports…
Replacement cupholder divider for Hyundai I40 (2016) with parking pass slot unsure if this will work with other Hyndai I series cars Designed to have a snug fit, recommending printing in PETG or ASA/ABS to avoid deformation
921973Z520 hyundai i40 headlight mounting
The plastic spacer between the brake pedal and the brake light switch broke in my i30, leaving the brake light switch permanently activated and the brake lights always on, so I modelled and printed a replacement. I printed it in PC for…
This is a fan-made katana for a friend Yuno Gasai's Katana/Blade from the anime Future Diary. A formidable weapon of destruction. Ideal for cosplaying or as a display prop. The Sheath/Saya belonged to a previous Katana model so it's not…
I thought that the under dash tray was very usefull, but on some toll streets it is usefull to have a handy cardholder for credit card or toll billets To mount put double sided tape inside the small joint on top and press it with some…
Cell phone mount for door side panel on the dashboard. Angled towards the driver, but not adjustable. Made for the Pixel 6a, but should fit any type of similar size. Slider is held in place by a rubber band on the back (will probably have…
Bei dem Modell handelt es sich um ein Fach für die Mittelkonsole bei einem 2021 Hyundai i20n. Es gibt 2 Varianten, eines mit Trennfeldern und eines ohne.
Flat HYUNDAI letters, Scale it like you wish to.
Threaded screw on replacement mat/carpet clips to fit a Hyundai i30 Sedan/Elantra with the hook style fixing. As it has a fine screw thread, recommend you print it at 0.10mm layer height.
This is an accessory for the storage compartment of the center console of the Hyundai i10 (AC3 series). The default slot depth is 15mm. If your phone is significantly thinner or thicker, you can modify the depth of that slot in the “vars”…
Wall Art Silhouette model of the Hyundai Genesis Coupe. Adjustable size. I accept model suggestions or ideas you have.
I needed a rocker clip for the roof liner of my trunk and nobody made one yet so here you go world. You will want a good calibration on you printer as the tolerances are tight. print in nylon if possible petg is working for me so far but…
spare roof rack cap for Hyundai i20 and others
MOD. HYUNDAI GETZ Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W