Lego Compatible (60483.dat) Technic Beam 2 Liftarm
This model is compatible with the lego system.
- Pobrania
- 946
- Polubienia
- 48
- Ocena
- 0
Liczymy pasujące modele…
This model is compatible with the lego system.
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
This model is compatible with the lego system.
ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…
This model is compatible with the lego system.
Slim casing for Nextion 7 inch NX8048T070. Designed for wall hanging.
This model is compatible with the lego system.
This model is compatible with the lego system.
I needed one of these plastic self locking bolt and sleeve assemblies for an IKEA Kura bed I bought thirdhand, that was missing some. So I took out one good one, measured and modeled up a similar design. Printed with 0.4mm nozzle in PETG…
Like the original, but faceplate with rounded corners and even frame width
This model is compatible with the lego system.
This model is compatible with the lego system.
A 3D-printable housing for the MyScale KP20488 bluetooth scale (~15 EUR on AliExpress). Designed to fit on the Gaggia Classic drip tray while maintaining bluetooth connectivity for Gaggiuino and Gaggimate integration. The model transfers…
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
Description The model allows to use the screw holes in the back of the Canyon Speedmax Seatpost SP0048 to attach a Garmin mount. Model Tests Model was tested with PETG. Screw holes are intentionally a tight fit. For the Garmin Adapter,…
Canyon CP0048 gear groove cockpit computer mount, I especially designed for my garmin edge 830. Print in PETG or ABS Infill : Gyroid - 85-95 % I used the original torx top screw ( M6 )and on the bottom a regular hex countersunk M6x12…
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
This model is compatible with the lego system.
This model is compatible with the lego system.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
Sunton ESP32S3 8048S050C 5.0" Screen Case https://www.aliexpress.com/item/1005004952694042.html I printed in PETG. All credit for the original design goes to marcusone
This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you…
Tool holder for large ratchets. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 75mm W - 87mm H - 45mm We design all holders…
As said in the summary this is a remix of the provided CAD model, I will be using this with parts from “Pico Neo 3 Link Grips for Gunstock” by MadwOrschtX on Thingiverse (https://www.thingiverse.com/thing:5449666) and “Reverb G2…
This is a simple case for the NVArcher Mini DSP . This DSP can control one stereo channel plus one additional mono channel for a subwoofer. I recently installed this DSP in my car, since it is a much cheaper option compared to buying an…
The covers slide in towards the negative side and then click in on the positive side. They are held in place by the batteries. I use Eneloops but if your batteries are skinnier you can scale up the Z to make the covers tighter.
This is a protective hard case for the Testo 405i anemometer (measures air velocity). It is a hot-wire anemometer so it is very delicate, and it did not come with a case, so I designed one for it in two parts - a case and a lid. The lid…
BOM: 2 pieces M3 countersunk head screw
I bought a FYSETC PanelDue clone ( https://www.aliexpress.com/item/4000152814384.html ), and I quickly found out when I received this that "clone" is probably not a great description as it is more like "inspired from". I guess I should…
A stl of Marklin E250480 retaining wedges.
Replacement for a Grass (brand) 048 baseplate for cabinet hinges. This one was for a lazy suzan door hinge. They don't make these any more, and they cost $40+ on eBay. Print face down, 100% infill for strength, 4-6 walls. Supports on, I…
A remix of @kiklhorn s Display Case I made the case symmetrical and tried to make it as basic as possible.
** UPDATED Got better at CAD, so redesigned the shroud, and the bump bit around the switch that cradles the group head. With the shroud the stock one grabs the group head too much so you have to wriggle to not still make a mess. This new…
Venonat is a fuzzy, round-bodied Pokémon with large, glowing eyes that dominate its face. In this low-poly style, its spiky fur becomes a cluster of faceted shapes, giving it a charming geometric texture. Its tiny limbs and twitchy…
Simple 92mm and 120mm fan mount for a unique ex-mining AMD RX 580 8GB 2048SP with a passive cooler and a single HDMI port. I could not find any info on this particular model but this card on AliExpress seems to be using the same cooler. I…
120mm PC cooler mount for SNK-P0048PS 2U
Made some cutouts for cable management
This is a model reconstructed from the obj bricklink studio model which can also be found below
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Someone in my community threw away a vacuum so I decided to fix it lol. Print it hot, will be a pain to pop on but should be workable [be sure to get the squared rims of the circular edges of the brush roller into slot or cover will not…
I needed for my pump a new cover so I created a new one It has no thread, only for direct mounted tubes. Also the area for the sealing is a bit wider, I took a slice of an old bike tube als sealing. It is tight but works for 6 month now…
It uses 8 M2.5 x 5 hex bolts . I also used 2.54mm 90 degree Dupont pins for an easy connection. The AMS AS5048B board is available here . You can also buy the AMS AS5048B sensor from official resellers such as Mouser here .
Requires pins, many common things like toothpicks or filament should also work as pins.
Replacement base plate for Sunbeam EM0480 coffee grinder. Fits well but the front does move just a little bit, this is due to the factory plate having a slight angle outwards which I haven't modeled as yet. Print in PETG/ABS if you want…
The Sunbeam EM0480 coffee grinder has bulk grind adjustment achieved through adding shims under the burr attached to the motor. They come in 0.25mm increments but they leave a small gap under the burr which can trap fine grinds. If you…
a case for the Fysetc 7.0' LCD800480 case snaps together with some force. printed in 0.3mm layer height and 1 top layer and 1 bottom layer. 3 walls material: black esun pla+ i used a textured pei sheet for the back and front
The toothbrush cover that the Sonicare HX9048 comes with only covers the front and won't stay on, so I modified the Sonicare HX6250 Toothbrush Cover to make it fit the HX9048. No supports needed if printed with the flat side ("back" of…
Carcasa externa para pantalla Nextion NX8048T070 (azul)
(english below) Es handelt sich um Entwicklungsmodell für einen Ersatzschlauch für Audi 048103223A. Der eckige Prototyp lässt sich gut drucken. Es gibt auch eine abgerundete Version, welche ich allerdings noch nicht gedruckt habe, da ich…
I wanted to a stand for my ESP32-8048S070 which had the touchscreen flush with the stand without a bulky bezel, with a very sturdy durable stand whilst still looking good. All the cases and stands I found had chunky bezels and the screen…
Throttle Cable Clamp HD Sportster
Replacement for Toyota Part No. 90480-15027 (Hood Support Arm Bushing/Grommet). Print using TPU with 15% gyroid infill with default settings. To install, slide the bushing onto the hood support arm, then insert the arm into the metal…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Replacement nut (plastic part at the bottom). Tolerance is not perfect but it seems to work correctly anyway. Printed at 100% infill and 0.1mm layers.
Sú tu 3 modely dokopy, je to prispôsobené na systém spiro Spiro 100 je vytvorený pre koleno ktoré si kúpite 55x110 / Ø100mm Spiro 100 A je pre koleno ktoré si vytlačíte, je o cca 1cm užší Spiro 100 B je koleno s rozmerom 46x110 / Ø100mm…
Replacement grommet for motorcycle side fairings, and various other applications Replaces Yamaha part 90480-01559-00 I lost the one of the grommets while working on my 2017 Yamaha MT-07/FZ-07 (used to hold the side fairing to the center…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Kvůli pevnosti je lépe tisknout se třemi vrstvami PetG.
I've had a few cheap motors saved from old 2D printers I've been meaning to use on a 3d printer for a while now. These cheap "can" motors have a step angle of 7.5 degrees which is quite lower than your usual NEMA type motor (1.8 or 0.9…
You need 4 pcs M3x4x4 heat-set inserts and 4 pcs M3x6mm countersunk screws. PS: added version for 103048 battery and Baofeng UV-5R clip/
this part cannot be bought from China, and when I looked at the original part, it cost 3 euros, but the import cost 11 euros, so I modeled it. I hope it helps someone. The part fits the motorcycle nicely. Material TPU98.
Lagerbuchse für Vorderrad eines z.B. MDT Aufsitz Rasenmähers. Jedes Vorderrad benötigt davon 2 Stück. Die Buchse wird auf die Achse gesteckt, auf die Buchse wird das Vorderrad gesteckt. Die Abmessungen entsprechen dem Teil MDT 741-0487…
This is a case I made to incorporate my 4.3" display as a keypad on my gate outdoors. It has a big “belly” so you can have your necessary components inside. I have: LM2596 buck converter on top 3.7V battery, small BMS with 5V output, PNP…
The OEM clips, part number DA61-04809A, are nearly impossible to remove without breaking, and cost a stupid amount to replace. The OEM clips are usually sold for $10each. $10 for what is less than ONE CENT worth of plastic. It's a…
My kid needed to securely stand the monitor on its bezel without tipping. This stand supports the monitor and prevents it from tipping back. This stand is specific to the vintage Dell 2048WFPb monitor and I don't expect it to be…
This is a custom-designed fan blade mount for the Harbor Breeze Boltz III ceiling fan (Item #5497048). If you've lost or broken your original mounts or need a customized solution, this 3D-printable replacement provides a secure fit to the…
Goosky RS5 / RS6 Main Frame Support Set GT060048
This is a Remix to the previous model, making it the improved Version 2: - better screwholes (not breaking anymore) - added spaces for sensors HLK-LD2410 (NOT HLK-LD2410C or any others) - added space for BH1750 Light Sensor - overall…
GOOSKY RS5 / RS6 - COMBINATION OF TWO PARTS GT060047+GT060048
Alternative for expensive power plugs for Sailor 2048 Vhf radio's Print in any rigid material Items needed: 2x 1.5 - 2.5mm round plug sleeve's 1x power cable Epoxy to glue the plugs in place Crimp the plugs onto your connectors, shave the…
Custom 3D printable crevice tool designed specifically for the Adler AD7048 vacuum cleaner. In addition to the ready-to-print crevice nozzle, this release includes the original 3D adapter model in STEP format . You can easily import this…
Maxxis makes some great flashing LED lights, but not all mounting surfaces are perfectly vertical. I designed this to allow for various angles/pitches. With the SCAD file and openscad, you can adjust them to the best angle for your…
The keyboard that came with my Macintosh Classic II worked just fine, but the right shift key was "lazy." It would record being pressed but the key itself would not spring back into position like the other keys - just sort of lay there…
Snap-Fit Desk Stand for 7" ESP32-8048S070C Display A screwless desk enclosure for the 7" ESP32-S3 touch display (ESP32-8048S070C, sold by Sunton / Jingcai, 800×480, capacitive touch). The parts simply click together, so no screws, inserts…
Parametric 5.4cm tall object with 7-sided faceted geometry and a knurling pattern. Engineered for precise 3D printing.
Parametric 7.1cm tall object with rounded circular geometry and a crystal pattern. Engineered for precise 3D printing.
The frame can be installed in an enclosure with a wall thickness of 1.5 mm or greater. Mounting requires a 2 mm wood screw approximately 14 mm in length, eliminating the need for a nut or a soldered-in thread. Print settings are entirely…
(english below) Es handelt sich um Entwicklungsmodell für einen Ersatzschlauch für Audi 048103223A. Der eckige Prototyp lässt sich gut drucken. Es gibt auch eine abgerundete Version, welche ich allerdings noch nicht gedruckt habe, da ich…
This model is compatible with the lego system.
A 3D-printable housing for the MyScale KP20488 bluetooth scale (~15 EUR on AliExpress). Designed to fit on the Gaggia Classic drip tray while maintaining bluetooth connectivity for Gaggiuino and Gaggimate integration. The model transfers…
This model is compatible with the lego system.
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…