3767 modeli
Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…
Wydruk około 5,01 €–6,12 € nettoWstępna wycena jednego wariantu
Standard Drill bit set wall mount .0625 to .5 inches
Wydruk około 5,66 €–6,91 € nettoWstępna wycena jednego wariantu
The included screws with the slzb-06 for surface mounting looks small, and easy to rip out when removing the adapter. This mount solves this by using 3x16 or similar countersunk screws. For anyone using imperial, a screw with ¼” head…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Art Silhouette model of the Chevrolet Corvette c7 Z06. Adjustable size. I accept model suggestions or ideas.
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
A case for your Rii i6 / K06 Mini keyboard with an integrated USB dongle holder and phone stand! This version is reversible so you can put the mini-keyboard in either way!
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Bonsai display table (No. 06) square 180x180x33 mm, best for bonsais with round pots. Feel free to scale up or downn until you like the result and it suits your tree.
Wydruk około 16,09 €–19,66 € nettoWstępna wycena jednego wariantu
Stackable shelve for lego 10698 box. For one lego box you will need 10 pcs.
Wydruk około 5,80 €–7,09 € nettoWstępna wycena jednego wariantu
Got my son and RC car for christmas and he broke a body post so I measured another one and made this. Fits the DEERC 9206E from amazon.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
CZ Jednoduchý držák pro Zigbee adaptér SLZB-06M. Otvor pro šroub je cca 2 mm. Pro přichycení jsem použil šroubek 2,5 x 12 mm. EN Simple holder for Zigbee adaptor SLZB-06M. Opening for the screw is aprox. 2 mm. I used a 2.5 x 12 mm screw…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
The existing models to attach a MLX90640 to a Raspberry Pi transform the whole setup into a thermal camera. I wanted to use the camera while allowing the Raspberry Pi to have other uses as well, therefore created this detachable cam…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Print Settings Rafts: No Supports: Yes Resolution: 0.3mm Infill: 100% Filament brand: Doesn't Matter Filament color: Doesn't Matter Filament material: Doesn't Matter
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple hook that clips over the edge of any Modular 006 or Modular 007 shelf wall, whether the unit is an original double-width version or one of my remixed single-width ones . The back is angled 8 degrees inward to allow the…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry). Tolerances were made for printing at 0.3mm layer height. IMPORTANT! Print the top…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Print with supports for underside and mirrors. Infill can be quite low (5-10%) Doesn't need to be strong. Sliced files are added for an ender 3. The two sides will glue together or can be printed as 1 whole part.
Wydruk około 3,09 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You need a M3 bolt + M3 threaded insert (OD 5mm, length 3mm…8mm). After printing, melt the threaded insert into the piece. Print “upright” for best quality (I found other orientations made the nut not fit exactly). No supports needed.…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
I designed this Gridfinity bin to organize my small woodworking shop. This 1x3 Gridfinity bin holds the Hongdui JF06 Kerfmaker. The bin has no stacking lip but holes for magnets on the bottom. Model was created using Fusion360 and the…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
This is a small bench-top case for a combination of a 48V LED power supply and a Riden RD6006 DC Power Supply. To complete this, you'll need: 1x Riden RD6006 DC Power Supply 1x 48V 100W LED Power Supply 1x C13 Socket (or any other with…
Wydruk około 11,23 €–13,73 € nettoWstępna wycena jednego wariantu
EN: To identify the control that activates a special light (usually yellow in colour) located in the front of the vehicle to aid forward illumination in foggy conditions. To indicate the operational status of the front fog light. DE: Zur…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional After printing, the charger cable presses into this part. It takes some force, but this…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Ich nutze die Modelle als Halterung für den Stecker „ Kalitec KALI-2408 ”, um das Netzteil meines „Prusa MK3.5” außerhalb des Druckergehäuses ( PrintClosure-Projekt ) zu montieren, sowie für den Stecker „ Kalitec KALI-2406 ”, um…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spacer for TDM КМПн-2/4 SQ0907-0602 if you want to fit contactor inside. Расширитель для TDM КМПн-2/4 SQ0907-0602 если вы хотите установить контактор внутри. Printed from PETg, basic infill, basic (2) perimeters. Supports are needed, also…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project is part of the Educational Innovation Project IE25.6106 at the Universidad Politécnica de Madrid. It involves the creation of a custom-designed key that was awarded as a prize in an educational escape-room activity. The key,…
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
This activity is part of the educational innovation project XXXXX, which aims to improve student attendance through the use of physical rewards distributed in the classroom when students complete certain activities. Critical courses or…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I wanted to create a space-saving storage option for my BlueBrixx Space Camper. With this mount I was able to achieve this. Because I didn't want to drill holes in my wall, I just nailed the mounts. Therefore there are no mounting holes.…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement piece to plastic mounting plates above earphones.
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
Not necessarily to be printed, but used when designing projects in CAD. STL, OBJ, F3D and STEP files included. New 2020-R Extrusion! Please don't forget to like the model if you find it useful. Thanks!
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…
This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size. The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the…
This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
SVO6 You need 2 x 173.5mm in length each to fill each groove (a ~1mm gap will remain). Scale the length if you need to. SV06 Plus I'm told by user @ThomasAlbrecht that to cover both extrusions fully, you need 4 x 223mm. SV06 Plus ACE I'm…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
If you own a Sovol SV06 3D printer, you know how important it is to keep the bed cables secure and protected. That's where the SV06 strain relief comes in - with its straight and lifted versions, it helps to prevent the cable from rubbing…
PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…
This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…
Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…
This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…
This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. Other boards do vary slightly, and the model's clearances are very tight. A…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Update! -- November 29, 2023 I have recreated my remixed frame strain relief support model from rogerquin's original model using OpenSCAD ! By default, the recreated frame support is the same as before. However, the OpenSCAD model…
Summary This is a model of a Chevrolet Corvette Z06 (C6) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of integrated…
V5 Duct added, has better aimed cooling but i have not tested yet Rear mounted 5015 parts cooling duct for Sovol SV06 V3 released, cleaned internal geometry, made the mounts work better and gave the duct better clearance 2 M3x20 bolts and…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…
Helps you to put on your bed correctly
Collection of 2020, 2040, 2060 and 2080 extrusions. The model is 1mm in the Z-axis so it is easy to scale it to wanted length. Also included the .dwg file if you want to make changes to the model. Category: 3D Printer Parts
Wanted to make a tool storage rack for the SV06 that match the style of the rest of the printer. Has a spot for all the tools that I received with the printer as well as 5 nozzles. Its one piece that printed on the top face. No supports…
Created a filament guide that better matches the design of the Sovol SV06. I will make a better print when I have the right colored filament.
This is just a remix of https://www.printables.com/model/361794-sv06-5015-part-cooling-duct. I rounded the corners which could potentially give it better airflow. I saw someone request it in the original comments and figured I'd take a…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Update 8/27: Adding Orcaslicer klipper speed profiles. Adding Orcaslicer printer profile and slicing profiles to this for max speed benchy (25:52 benchy) without sacrificing quality, and a general profile for normal detailed prints that I…
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…
🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…
Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…
This model is compatible with the lego system.
This model is compatible with the lego system.
1:22 scale Bell 206 B3 r/c helicopter on OMP M2 mechanics Print instructions Updated 13/05/2021 to rationalise the landing gear parts so that they are easier to print and assemble. I've reprinted mine in PC Blend so that the landing gear…
I got a request for a 30-06 Ammo box and there are more people asking for it and also someone who thought the previous lid was too tight for their ammo. The reason was that I made it tight for the Norma ammo my friend used so it wouldn't…
A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…
A quick test for adjusting your Z-Probe Offset while printing with the SV06, it draws the skirt right next to the purge line, check this in your .gcode file with your slicer beforehand. You can adjust your Z-Probe Offset while printing…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…
Keycap de charizard para imprimir
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
This is a collection of all warning symbols (W001 - W067) according to ISO 7010. All the models are drawn by hand, so some minor differences to the norm can occure. The signs are based on the images from the following Wikipedia article “…
This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…
PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports
I printed this in Polymaker PLA, at 100% infill. I heated the ends a little bit to make it go on nicer but it works like a charm! If you will be printing with PETG or ABS, I recommend printing it in that material. I printing in PLA since…
This model is compatible with the lego system.
Works with caliber 308w, 30.06 and 30-30(confirmed by the printed cow@theprintedcow_527926 ) I needed a good ammo clip that I can easily carry with my during my driven hunts so that I have enough bullets, but still doesn't make any…
I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)
This model is compatible with the lego system.
This model is compatible with the lego system.
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Many similar clearance tests are available here and elsewhere in internet. I could however not find one that goes tighter than 0.1 mm so modeled one up in Fusion 360. I have been able to tune my printer (CREALITY CR-6 SE with Dragon…
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
Arm to help folks mount a camera to their SV06/Plus front frame. Arm has a hole that should accommodate a variety of bolts for camera bases. Step files included if adjustments are necessary. Haven't tested with anything heavier than a…
I've created a rinser that can be applied on every PET bottle with DIN 6063-1 thread (widley used in europe and may be other countries). How to print? The model can be printed in place, without any need for support or rims. A smooth print…
You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…
Update 2022-12-05: Added V2 which is more of a slotted opening tapered to the left and right to account for times when you print something very tall. It gives more flexibility for the filament when the print head is farther away from…
This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…
No support, better fan duct for Sovol SV06 PLUS On photos you can see difference between standard and upgraded fan duct. Also check my Sovol SV06 PLUS Cable HOLDER https://www.printables.com/model/482250-sovol-sv06-plus-cable-holder If…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
Extruder cable support for the Sovol SV06 to prevent sagging and contact with your prints. Turn off power. Remove extruder cable. Place support over the cable keeper hooks. Reattach extruder cable.
A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the…
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
This part replaces the one supplied by Sovol with the SV06 Plus and adds an extension off the back to provide additional support and also angles the cable up slightly to keep the cable from rubbing on the rear frame. Two zip ties are…
