4446 modeli
This is not an easy print. Your printer MUST be dialed in well. If you aren’t sure about your printers tolerance abilities, print this first- https://www.prusaprinters.org/prints/127569-s-shaped-tolerance-test-01-04mm-in-002mm-increment…
This is a very simple, very fast to print bearing made of three interlocking rings which print in place. You can use it as a drop-in replacement for ordinary skateboard bearings, but because it relies on sliding rather than rolling…
Versions: V2, 10/18/2022: Fixed inner diameter to match 608 specification. Added extreme tolerances for perfectionists. Unfortunately, "Bearing.stl" is something you can't just download and print. Most of the time it won't work properly…
Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…
This 608 bearing is fully printable, robust, reliable, somewhat dust/dirtproof and easy to assemble. Since filament has a tight tolleranced outer diameter, it makes for the perfect roller in this bearing. Even if your printer has its…
Printed bearing with no balls or assembly, easy to print with no supports. I saw another one like this on Thingiverse but the curve was the other way around which made me feel like it would be less stable. Print Settings Rafts: No…
I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you. 2020/11/15: Added some variations based on what…
Printed on Prusa Mini+ Nozzle 0.4, PLA 0.07 ultradetail mode (0.1-0.12 should works too) Please set the flow for 90% Print it slow! 20-25mm maximum is recommended. Dimensions: 8x22x7mm You like it? You can buy me a coffee 😉…
This is a practical, printed 608 Bearing suitable for many DIY projects (for example in a spool holder). It is a fully functional roller bearing with a proper working cage. It runs like a real bearing with a smooth action, tight fit & low…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
Remix from zx82net Great Rugged Box. The latch and hinge are not change so you can use all of his different models. Ammo box for 50x308 Printed with Verbatim RED PETG and Prusament Jet Black PETG 0,30mm 4 Layers. 2022-08-12 Uploaded a…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
Download different models based on your 3D printer's tolerances. My printer starts spinning 0.2 when all the parts are properly separated. If rings are really stuck, take a small screw driver to separate them carefully. You might need to…
Want to save money for the new awesome RTX3080? Here is the perfect piggy bank to keep you motivated! Kikiina asked me to make this design so she could who give this to her boyfriend who is saving money for a RTX3080, so thanks to you for…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…
------------------------------------------------------------------------------------------------------------------------ 21.09.2025 New version V2.0 also usable as print box is available Neue Version V2.0 auch als Print-Box nutzbar ist…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Hello guys I want to share with you that Funssor is selling our design so who want to buy this Top Hat already Printed with all the Hardware you…
The rod that goes into the extruder idler gear on the extruder arm likes to come loose. this will fix that. i have to push my pin back in after long prints or i end up with extreme under extrusion. this keeps the pin from getting to that…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models to find something else you might enjoy! ********** [Update April 4, 2026] if you are looking…
Another 608zz bearing that works for my personal use when i am out of metal ones PLA stl have bigger tolerance and i print it in PLA ABS stl have lower tolerance and is printed in ABS Printed on Bambu P1S 0.2mm layer, 3 walls, 15% infill
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Collection of 2020, 2040, 2060 and 2080 extrusions. The model is 1mm in the Z-axis so it is easy to scale it to wanted length. Also included the .dwg file if you want to make changes to the model. Category: 3D Printer Parts
If you've ever wanted to make use of those Milwaukee M18 18V batteries, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate assembly that slips onto the battery, snapping on…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
I got a request for a 308 Blaser ammo box of the new design. The spacing is 50pcs/12,60x75,50mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string if…
I downloaded and printed many 608 bearings. None of them satisfied me. Half printed balls were flying around in my printer or the bearing had too much play or other problems. So, after a lot of experimenting, drawing, test printing and…
Based on the Gridfinity organization system by Zach Freedman
The Prusa Roller is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the Prusa…
Hello, I've designed and made this bearing. It works i pretty good:) I've made various designs but this one works the best for me now. I use 4 of these on my spoolholder for a smoother feeding to my extruder. **Fixed the issue that the…
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
This is a 2 piece printable ammo box to store 308 rounds. I reload my own rounds and found these 3d printed versions to be just as sturdy as the store-bought versions, but way cheaper. The box holds 50 rounds. Use an 18-gauge brad nail…
Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…
I have printed them in Polimaker Galaxy Black ABS and they are perfect! The chain and the clip can be printed without support but the ends will need support. Note: if you have bed adhesion problem when printing the clips you can rotate…
Heyho Here I have a simple and oldshool 608 bearing alternative 4 you :) 2 Design options: Smooth & Toothed. 2 Tolerance options: 0,2 mm and 0,15 mm. Printing “advice” Set Seam to “random”. If you can print multimaterial (Prusa XL, ..)…
Hello everyone New Version Is here thanks to the community members that helped with the perfect fitment In the Cad you will find all the screws and heat set insert that you will need. for those that don't know how to use a step file i…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
Description This is a 3D-printed Luger P08 “Parabellum” inspired fidget keychain , designed as a fun mechanical toy with the iconic toggle-lock movement. It’s not a weapon and cannot be modified into one — just a satisfying desk fidget…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
I have added the Extruder Main body and the Blade holder for KB4-F_5 Blade We highly recommend this Blade since is more reliable/ durable/ thick and it sharp! be careful! We have switched to a better Blade…
I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :) Hope you like it! Please leave a comment and like :) The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I…
Works with caliber 308w, 30.06 and 30-30(confirmed by the printed cow@theprintedcow_527926 ) I needed a good ammo clip that I can easily carry with my during my driven hunts so that I have enough bullets, but still doesn't make any…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.
Voron V2.4, Trident, V0.2 and Micron Spool holder Important note Be mindful of the type of bearings you use. You don't want too much free spinning. Try to find cheap bearing (it's not every day we can say that !) or use printed bearings.…
Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…
My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…
I have added a big version to accommodate for V4 and for Xenomorph with Eddy You need to orient the part in the slicer this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new…
I couldn't find a yoyo model for a standard 608 ball bearing, that's why I created my own. I designed it with the specs of commercial unresponsive yoyos in mind: 55mm diameter 36-38mm width 54-60g weight Turned out that the yoyo can not…
22/05/2023 - Update Have now printed the .222 100 round box, it works well however its a little tight, the rounds fit but i may either reprint with slightly larger holes or just run a round sanding bit through them 07/05/2023 - Update…
printed with ankermake m5 in normal mode, 50% infill, support
This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…
Very strong pulley that uses a 608 bearing. I designed these to be easily mounted with wood screws and to withstand a lot of weight. They work great with paracord and can be used for a lot of different projects. Instructions : Use infill…
This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate. The Drag chain fixed joint and the Under the drag chain fixed joint are the original…
Bullet quiver that holds two extra 308 cartridges to the side of your rifle. I designed mine to fit the side of my KRG Bravo chassis screw locations, however these will fit standard m-lok slots using t-nuts similar to what can be…
The .308 Winchester is a rimless bottlenecked rifle cartridge. It is very similar to the 7.62x51mm NATO cartridge, and the two can be used interchangeable according to the SAAMI. Category: Sport & Outdoors
This container wagon model is printed in parts that are glued together. Detailed building instructions are provided in a separate PDF file. The wagon in the picture was printed with a Prusa i3 MK3S+ with 0.4 mm nozzle. The CAD files were…
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…
Work in progress So don't expect this to work as well as a steel bearing. It is a bit of a pain to get the bearing to work after your print is finished. but it will act as a bearing once you finish it. And spins really well. There are…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
See below the .cfg attached. ;) on to the Other Files section 🛠 Sovol SV08 Klipper Macros: Tap Z-Offset, Nozzle Cleaning & Adaptive Purge Thanks to Vlad for the brilliant firmware that enables the BTT Eddy sensor to support tap-style…
What's this? As seen in my FormD T1 v2.1 video , this anti-sag bracket secures the 4080 or 4090 Founders Edition stock air cooler and eliminates sag. Configurations supported: 3 slot 3.25 slot 3.25/3 slot (top strut in 3.25 slot + 5mm…
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…
The weak hinge is now fixed uploaded 28 February see picture. I got a request for a .308 ammo box. The spacing is 20pcs/12,6x75,24mm between the insert top and bottom. I made 3 different versions/logo. Let me know if you want another…
This is a remix of Milos V's rugged box designed to hold 25 rounds of 308 Winchester bullets. I reload bullets, and this is a nice way of keeping my precision ammo organized and ready for transport to the range. The bullets are held…
This model is compatible with the lego system.
One of the mods we are most proud of! this feet they are not just aesthetics they have multiple purpose obviously a fabulous look risers for better ventilation of the electronic part they have the role of protecting the large pulleys from…
I am sending a pre-configured sovol sv08 profiles file materials such as PLA, PLA-SILK, ABS, ASA, PETG you can mosify and experience improvements have fun profiles are in a zip file I added pla wood in the test version, set the speed as…
My original design has 12 individual spaces for bearings. This new version has three wide channels that can hold up to 5 bearings for a total of 15. Includes 1x2x3 version and a stackable 1x2x6 version.
.308 Winchester, also known as 308 Win., almost identical to 7.62x51mm NATO, is a centerfire rifle cartridge. .308 Winchester was designed in the United States of America by Winchester (using Frankford Arsenal's designs) in 1952. The…
This is a slim version for having cable chain on the Sovol SV08 All the part are pre oriented in the best position. Only the cover needs little support, the rest they don't need support and only for the clips if you don't have good…
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
Print with 3 perimeters, 20% infill, use snug supports to the bolt holes. Use M4 bolts and nuts to attach everything together. This works perfectly with the SV08 Filament runout sensor holder from dmika7200 . EDIT: I completely…
This 3D-printed filament holder is designed for larger filament spools weighing up to 3 kg. It features a robust and stable design, using 608 bearings for smooth and efficient spool rotation during printing. Its simple construction makes…
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
This is a remix of KONEz*347 spool holder with 4x 608 bearings. I adjusted the rollers, no supports needed anymore and added a base to keep the feet together. This spool holder is 144mm wide, so it can handle almost every spool out there.…
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
Fixes axel driven pin drift in SV08 extruder. -Single part print, no supports needed! -Skeletonized for strength Simply remove tool head PCB board, place this printed part behind it and bolt PCB back. It's that simple. Check out my Bambu…
…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…
Rodamiento 608 de 8x22x7 mm: Nombre del Archivo STL: "608_8x22x7.stl" Este rodamiento 608 ha sido diseñado meticulosamente para ofrecer una solución robusta y versátil en una variedad de aplicaciones industriales y mecánicas. Sus…
A 608 bearing using a print-in-place herringbone planetary gear, as someone requested. You might want to also check the customizable roller bearing . Print with random seams. I use 0.17mm layer height. Bed adhesion might be an issue.
This model is compatible with the lego system.
Adjusts angle of the built-in camera so it points down more (centered a bit below the nozzle). I recommend using Arachne wall generator to handle the very thin loop. Category: 3D Printer Parts
-no supports -0.4 nozzle -0.2 layer hight -100% infill -195grams of fillament -8 hours of print time (at 100-150mms) you will need six m3x30 screws put tape on the bottom and some thin foam (i used the foam that my printer came packaged…
Remixed from: https://www.thingiverse.com/thing:5498768 This remix has areas carved out on both sides of the roller that will accept a 608 bearing. The pins are also remixed so that one end will fit snugly into a 608 bearing, and the…
I printed this in ABS with 4 walls and 40% gyroid infill Required: 4 x M3 x H4 Heat Inserts, 4 x M3 x 20 Bolts
This is a filament sensor holder I've made for use with bottom mounted spool holders for Sovol SV-08 3D printer (such as https://www.printables.com/model/901288-sovol-sv08-side-mount-spool-holder-v2 or…
This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…
This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles. Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for…
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
