Liczymy pasujące modele…
Summary I made this remix for the disc version that fits ;) Corrected the anchor hole placement and depth. Replaced the text "Teo's PS5" by PS5 in the correct font. This is for normal orientation (PS logo facing towards you) of the PS5…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
This model is compatible with the lego system.
One thing that has always irritated me about my Technics 1200s is the hard-wired cables. This mod adds sockets for the power inlet and RCA phono outputs. The ground wire output is via a 2mm banana plug socket. Printed in PLA, 0.2mm layer…
Record Coasters with a Charming Technics SL-1210 MK3 Holder Why another set of Record Coasters? While I’ve always appreciated the concept of record coasters, existing designs often fell short due to printing challenges. Many abstracted…
This model is compatible with the lego system.
This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…
Fiat 1216HP year 1902 Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
connection bolt for Bruder "John Deere 1210E Forwarder with 4 trunks and grab" Verbindungsbolzen für den "John Deere 1210E Rückezug" der Firma Bruder Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,2 Infill: 100%…
Based on the very good model of ER605 & OC200 Rack Adapters (V2) by Sorcier, I remodelled them to fit 2x TL-SG2210P. It's a heavy device, and 2 of them in this pair of brackets are recommended to be supported, either by support angles or…
This is my version of a vacuum adapter for Makita chop saws, to be able to connect the vacuum to the fixed part and not to the moving arm as with the original adapter. You also need a cover for the upper part, but this is already…
A replacement for the tonearm rest with working lock. For Technics 1210 and 1200. Print it on the back with support on
A replacement battery cover for Denon RC-1192 remote. Printed in PLA, but I think that PETg or ABS will be good too. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Any PLA
Junction box for Reolink RLC 810A, 1212A etc.
Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm
2 1/2" OD dust adapter for the side dust port of the Makita LS1219L 12" Miter Saw.
This model is compatible with the lego system.
This adapter allows you to rackmount this TP-LINK PoE Switch. It holds both the device and the power adapter. There are no problems with airflow, so the switch doesn't overheat. Simply join the two parts with long screws and it will hold…
I created this remix so that I could connect both dust ports together into a single adapter which could connect to a 2" shop vac. Remove your old part, unscrew the hose from the blade guard and screw it into the new part. Also, insert the…
See it in action here The Makita 1019L/1219L Mitre Saw Dust Collection Adapter is designed to seamlessly connect your Mitre Saw to a 2-1/2" flex hose, enhancing dust extraction efficiency and keeping your workspace cleaner. This adapter…
This is an extended cover for the Makita LS1219L. It might also fit for the Makita LS1019L, XSL06 or XSL08 but I didn't test this. I changed the Laser light of my LS1219L to a shadow line / work light using the instructions of pemphillips…
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.
Object description: Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades. The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger…
Made for Dell LA130PM121 19.5V / 6.7A Power Supply Charger. Print instructions Steep angles, so print with cooling or supports.
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
This model is compatible with the lego system.
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
Compatible with Shimano Y8J712000 : BR-M9000 BR-M9020 BR-M987 BR-M985 BR-M8000 BR-M785 BR-M7000 BR-M675 BR-M666 BR-RS785 BR-R785 BR-S700 Compatible with Shimano Y8J712100: BR-M6100 BR-M6000 BR-M615 BR-S7000 Name Compatible Y8FZ05000…
Simple rain cover design to be attached with a (4-5mm wide) ziptie to the camera. It keeps the microphone hole in the casing free. Print in any material, but recommend PETG 0.2mm layer height for precision and durability. No supports…
Original Makita bypass is for easier connection to the vaccum hose of the LS1219 / LS1219L / LS1019 / LS 1019L by @Tobi Höher. https://www.printables.com/de/model/559368-makita-ls1219-ls1219l-ls1019-ls1019l-vacuum-adap This model is a…
Needed to create a baffle for the widely available and inexpensive Dell branded Mellanox ConnectX-4 LX cards that are slightly different in layout than other half height versions I've seen. The card is very secure once the baffle is…
Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…
This a holder for a SMA connector and the new tiny BZGNSS BZ-121 GPS unit. I printed it in TPU with 100% infill and a 0,2mm layer height.
Wall Mount Technicolor CGA2121 Wall mount for the Technicolor CGA2121 router. The router is inserted into the holder from the top.
This is a really great project that was created by talented people on the Neo - Arcadia forum. Victim of their success, unfortunately we can no longer order "for the moment" the complete frame kits to manufacture the project. In the…
I needed a better solution for the dust colleciton on my Makita miter saw. First and foremost I wanted to move the connection point from the top, sliding portion of the saw down to the bottom and I also needed the ability to connect a…
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert. To connect the two pieces, I had played with the idea of a puzzlepiece-like…
If you are here you probably know what this is. Since the original parts ( # B121U0117F ) are quite expensive, and are designed to break every time you have do open up your dash, I designed these ones that you dont need to break in order…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Ich habe den Adapter für meine Makita DLS211 erstellt.
Body mount post for HPI Maverick Strada MT (2017 edition, MV12623), original part number MV22121 - Body Mount Post. Also compatible with: Redcat Volcano EPX Pro, HSP Brontosaurus, Exceed Infinitive, Himoto EMXT-1, Amewi Torche Pro (which…
knipex 9721215 crimping pliers hsw
The turntable model published by @DIVO3D_2177560 required a rather expensive bearing that didn't really seem necessary for overall functionality, so I made a printable version that costs pennies and only requires 6mm bearings and 6x3…
The idea behind this case was to create something minimal, sturdy and without any fasteners. The T-Beam is aligned with the case through the use of a brace below the PCB, which locks it into place on the mounts so that there's no sliding…
It breaks for everyone, I've reinforced it, it's completely free. 3d print only petg. fill 20%. 3 wall/need Supports/ I'll take it from you https://boosty.to/vgnroff/donate
This is a very simple yet good looking enclosure for the very cheap and popular W1219 thermostat module. You can use this module for almost everything related to heating or cooling. It is easily programmable and suitable for every DIY…
This rain cover fits the Leica GPR121 prism; for a version compatible with the more common GPR1/GPH1 (and its many copies), see my other model. The rain cover attaches to the prism by clipping around the vertical pivot connectors, making…
Redesign of the modular front for the w1219 temperature controller housing, with switch for Raspberry Pi and longer internal groove for the w1219 circuit board. Orientate with the main face, face down on the bed. No supports needed. Print…
After printing 2.8m with the snowflake garland, I wanted to push productivity to the extreme. I was just curious how many meters could be pushed out of an area of 200x200mm (chosen to make the model accessible to everyone) , so I got to…
I tried my hand at designing a zero clearance insert for my miter saw. It took a lot of test prints and refining the model but eventually I got there. This model can print on a single plate and then slides together using the dovetails. I…
This is a replacement dust port for the Makita LS1219 Miter Saw (12"). The stock adapter is sized for a 1.5" (40mm) hose. And the way the stock port is configured, you cannot place the saw up against a wall without pinching the hose. This…
I wanted to check the alignment/collimation on my Svbony SV121 Laser Collimator, but other existing tools didn't work as it has 2 different diameters to the front an rear of the housing so I designed my own alignment jig for it. Uses 4 x…
The earlier marks of the AVO 8 analogue multimeter use a 15 V B121 / BLR121 battery for their high resistance range. This battery has been obsolete for decades, although commercially available substitutes exist which are based on a stack…
Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…
Bmw E30 - spacer for center console trim. OEM-number: 51 16 1 943 121 This spacer is used to prevent center console trim plastic to bend or deform. Reproduced with the dimensions of original part. Fusion360 source-files (*.f3d) attached.
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
Introduction As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I`m proud to showcase the next Warden Armoured Car. The “Highlander” is a great addition to any attack force. Its manoeuvrable, speedy, brings a…
Same BOM as on Github, wiring on the right, to be attach on the outside of the 2020 extrusion.
18650 Battery Tray, literally maximum my bed can hold - that was my main goal Normal use case please print V2 2 times. If youre really desperate of space and or print time you can try to print V3 but it is a absolute nightmare to print +…
Inspired from similar models, i created this junction box to place my cameras around the house. These junction box ease the placement of the camera. Size is either 100 or 110 mm Cover is either plain for any camera for Reolink 1212a or…
This model is compatible with the lego system.
This is a case for the ES 120 or 121 electric screwdriver and it can also hold ifixit precision bits with there holder. There are 2 versions of the lid. One is plain and solid, the second one I made a cut out and glued in a piece of…
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Stabiles Scharnier mit den Abmessungen 121x65x16(7) aus Pla mit einer Achse aus M5x60 Inbusschraube PLA oder PETG 100% Infill
Centauri Carbon door mount for TP-Link Tapo C120/C121 camera. First attempt, there's some geometry I'd like to tweak and will maybe adjust the angle in a second version / make the cone flare out so the image isn't cropped on the right.…
A GPS holder for BZ121 which sit on one of the pavo pico VTX antenna hole. still less than 100g after use.
Model Siren. Fixed. The old version is still up (better for low quality tiny builds). Issue: Can't upload. Will do later
This is a design for a parametric SKADIS-style board, designed to be attached to a wall using Command strips. The design is fully parametric (made in FreeCAD 1.0.2), and can be customised in FreeCAD using the spreadsheet. Premade Sizes…
Needs a bit of filament as the lever axle. Make sure that the natural curve of the filament runs as on the last picture. Otherwise the button maybe be always pressed. At the request of @wolph I made a version with a bitholder at the…
Sub250 Oasisfly25 BZGNSS BZ-121 GPS mount TPU. Printed in TPU 95A.
I was in the market for some 6ft garden stakes, when I came across what I needed, but the ends had been run over by something. Me, being the frugal person that I am, saw this as an opportunity to save 70% of my hard earned dollars. So I…
Volvo Amazon P121 (1965) automatic steering column plastic covers 3D scanned Volvo Amazon P121 (1965) automatic steering column plastic covers. Need some cleanup as the scanned ones are a little distorted and have been repaired. Posting…
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
It is a replacement part for the parts 130650 and 121111 They are the same part with diferent colors
Adapter for e30 HVAC panel that allows the factory radios to be flush rather than protruding slightly
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
Parametrically designed holder for the temperature probe on a XH-W1219 controller. Designed to be placed within the enclosure roughly at height with the printing surface. Recommend printing in a heat tolerant plastic like PETG/ASA/ABS…
Exact copy of orginal backplate for Yamaha ERG121.
Two sets of replacement rivets for a Lionel 1121 O27 Turnout. First set is a little long with the intent being one could melt the rivet closed. Second set is a near perfect fit, and can be secured by gluing the 3 printed end caps.
I had combined LegendaryCheez's two parts into one to be printed on larger printers (Creality K2). This also fits Makita LS1013 as well. Print solid (infill 100%) for best results.
Náhradní díl na nakladač John Deere Bruder 1210e
lego 3030 3031 3032 11212 3035 3029
The door handle trim on my BMW E28 broke so I created this 3D printed replacement. I know this part is still available and cheap but I wanted to practice my 3D modeling and printing skills. This is a replacement for BMW part number…
Created in Tinkercad for modeling purposes, not for printing. Category: Other
Rubbermaid 121 L (32 Gallon) Outdoor Trash/Garbage Can/Bin replacement handle. No support, press fit so no screws or glue needed, but can be added for extra strength
The tail light covers on our compact tractor kept falling out during use and getting lost. The only info I could get was the printed “IMASEN 1121-491” on the one remaining official cover. I found nothing online except a thumbnail of an…
First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…
This is a base plate for the Bauer 19121E-B router that allows you to router at a 45-degree angle.
Saw that 121GW has a little hook at back of case, so decided to make a wall-mounted holder Made in SolidWorks 2017, file attached as always UPDATE: v1.0c, added a chamfer to front faces to make alignment easier
A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…
Making a few mods for my ES121 so i needed a 3D model to work from. Buy here: https://bit.ly/378e7dX Category: Tools
Got a used Dual 1218 turntable off Craigslist for a relative, fixed it and now it's working but it was missing the center spindles. So I tossed design this together in about 15 minutes, and printed it in about 25 minutes. It's for…
