176 modeli
This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm)
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Screws for fixing the panel - m3 Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm) and HW-774 (Chinese copy with worn-out markings) Screws for fixing module - m2 (6-8mm)
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 5,24 €–6,41 € nettoWstępna wycena jednego wariantu
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Do you want to print as clear as you can on your printer? This tuned set of profiles for BambuSlicer/OrcaSlicer should help you print with clear as i've been able to tune on my X1C. I've tried several different parameters and come up with…
Hey :) I remixed the “ Bambu Labs Carbon X1 Top Glass Riser for LED's ” Now you can print it without TPU and it works better, we made some updates to the file! 1. 2x 3h printing time - 2 parts fit on the X1C. 2. no TPU needed anymore…
ETSY Enhance your ROG Ally gaming experience with this Xbox-style grip designed for the Z1E model. This ergonomic accessory improves comfort during long gaming sessions by providing a familiar controller feel. Perfect for handheld gamers…
Konverzní sada pro přestavbu modelu tanku KV-1 na verzi KV-1E. Základní verze KV-1 zde: https://www.printables.com/cs/model/219806-tank-kv-1-rc-model-110 Veškeré info pro stavbu najdete v návodu.
The Speedline wheel from the legendary Audi Sport quattro S1E2 Group B rally car, in 1/10 RC form. Designed to be paired with this: https://landlmodels.co.uk/collections/audi/products/quattro-s1?variant=29373806575677 This wheel has an…
Update 02.07.2024 - V3 Model with no blinkers. I saw that there were a couple of request regarding a model with no blinkers, new model added ;) Update 28.06.2024 - V3 model released! Updated the design so its easier to install the lid.…
Every BMW owner knows this situation.. you're driving into some curve with about 100 km/h, your rear end goes left while you wanna go right and then it happens.. your Redbull that you put in the OEM's cupholders spills and you have a mess…
Made it larger, added a cutout for the air vent holes on the X1E, added an embossed logo. Bambu Lab X1E 0.4 Nozzle Textured PEI Plate Bambu PETG Basic 0.20mm Strength @BBL X1C No Supports No Brim
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
Why another design First of all thanks to Ruvy for his design . But unfortunately I had to realize that the diameter and thickness of his design did not correspond to the dimensions of my Looping Louie game. That's why I created my own…
The F-111 Aardvark is a variable-sweep wing, supersonic, attack/bomber aircraft developed by General Dynamics. It entered service in 1967 in the USAF, and 1973 in the Royal Australian Air Force. With complications holding back the D…
edit: Just added 2 “angle” files which increase the angle back by 7.5 and 10 degrees. I feel this is better than the straight vertical ones I had before but I have left the vertical ones just in case someone else prefers them. I took the…
# 🇩🇪 Geometrische Licht-Kollektion Eine Serie von Lampenschirmen mit unterschiedlichen geometrischen Topologien. Optimiert für den FDM-Druck ohne Stützstruktur. ### Die Varianten * Honeycomb: Hexagonale Wabenstruktur. Maximale…
This is another version of the ROG Ally Z1/Z1E dock port cover (XGm port) with a snug fit so it doesn't accidentally fall out. There is some risk involved so make sure your printer has good calibration for an accurate fit. There are 2…
This is a remix version of the Si1verEag1e's 1.9 Crawler Tire Inserts specifically design for the JConcepts Raptures. Though Si1verEag1e have a 120mm x 40mm I have made adjustments in the inner ring diameter from 48.26mm to 55mm to…
Trash can for waste chute that clips on magnetically. With and without alignment pegs. Use four 6x3 mm neodymium magnets to attach to the printer. Align such that the front lip of the trashcan is not touching the waste chute to avoid…
2026/01/26 update: Added dual stack mount to mount 2 module at once. Remember to cross the wires as the are mounted opposite with each others. ===== 2025/10/15 Update: A user asked for source Fusion360 file so I've added it. ===== I…
Simple keychain for euro (or euro-like coin) Print instructions no support needed
I got a request from Neistsch to modifying my existing thing to fit the Worx Landgroid M500 series, so over a week or so of emailing measurements, images, test parts etc. we finally got the wheel fitted and adjusted to work. The images…
My magnetic Shit Bucket and compact poop container that mounts to the chassis with five 10mmx2mm magnets . WARNING: Sport mode (or slower) is recommended (probably just need to dry my filament - ludicrous wasn't perfect for me). V3…
A corner bracket for the Aqara FP1. It probably also works for the F1E, but I haven't been able to test that yet (you can perhaps report on it in the makes, I would definitely be pleased :) ). In my profile you can also find a version for…
Modified to fix the interference with the X1E's ethernet port
Hello. I am publishing here my lens hood model for the olympus 75-300 II lens. I made the inner surface ribbed to reduce glare. I recommend painting the inner surface with black paint, for example with a permanent marker. Use it with…
Printed at a 45 degree angle in both directions to avoid layer lines
The ring on the fins is printed separately due to the overhangs. A small bit of superglue works perfectly for me. I've then primed, painted and matte clear coated it. Also a hair dryer on the fins to soften them and bend them out of shape…
This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…
Original model was very well designed, however I have reservations about having it completely enclosed with 65w output so I added vents to the top. Because of the added vents, its labels can no longer be on top so I also moved that to the…
Aqara S1E Base, printed by PETG 0.2mm layout or 0.1mm for best , no support
Pimp your V1E Lowrider 3 with a blinging grill, complete with measurement markers, and no cut zones. Originally based on Jamie's Strut generator script. Usage instructions, and latest files, available at…
a gridfinty holder for the casio fx-991es calculator
The model is designed to mount a Aukey LM1E webcam to the ender 3 S1 Pro. I have included the standard version of the model and a version where the mounting angle is more intense. The steeper model will point the camera angle further…
EN: The Prusa XL with 5 print heads has unused 24V terminals in the centre PSU for connecting the module. I have installed a car fuse holder ( Aliexpress Search ) with a 2A fuse, as this is sufficient for my USB devices. The CKCS board (…
I improved the original model with this mods: LED GASKET WINGS , so the LEDs can't shine into the eyes if you watching inside the chamber 45° LED gasket 12mm LED gasket LOWER LESS MATERIAL FASTER TO PRINT CAM OR GoPro SIDE MOUNT NO SIDE…
I know, this is for a highly specific need - but I had that need, so someone else might, too (it did, in fact, get about 10 downloads over at Pinshape) … The Automattic 21E is built like a tank, which means there's probably quite a few of…
I designed this Mount to put a Hygrometer in the view of the internal camera from my Bambu Lab P1S, so I can see internal Temperature and Humidity of the Printer in the BambuStudio/BambuHandy. The Hygrometer I used is the standard…
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
front plate for the Talaria sting l1e with slots for the blinkers
Hello! 2025/7/14 Update: Added latest .STEP and Fusion 360 .F3D files for anyone wanting to update/remix. For example, the mount hole hook could do with more material to make the part less likely to break. I've moved on to LowRider 4, but…
Couldn't find anything less than a 50 pack of these for $500, I'm assuming for large office installs, but I only needed two. Quick and dirty model later and it's ready to mount. The holes are sized for these anchors from Amazon. I'm not…
Decoración para torta de Primera Comunion o Confirmacion
Just a small modification.
Holder for 11 Paints + 4 Brushes Practical holder for Warpaint paints (Ø 2.5 cm) with space for 11 paints and 4 brushes. Perfect for keeping your hobby workspace tidy! Like the design? Feel free to support me with a small donation…
Pokus vytvořit náhradní díl změřením a namodelováním tisknutelné alternativy. Nejspíš bude nutno ještě lehce upravit
2026/03/12 Update: Added v7 for newer, cheaper copies of the board without mounting recess. ===== This case was made for the base model of this U1E 65w Type-C PD board with solder points. It's a tight fit with the groove, so consider it…
A holder for the new remote of the M1 Matter Light strip from Govee. The bracket can be glued or attached with two screws. Eine Halterung für die neue Remote des M1 Matter Light strip von Govee. Die Halterung kann geklebt oder mit zwei…
Enclosure for CKCS U1E 65W USB Type-C PD Module (XT60 Input) This enclosure is designed for the CKCS U1E 65W Type-C Power Delivery module , featuring power input via Amass XT60 connector . Purpose The primary goal of this design is to…
This knob is made for the PL41EM. The inside diameter is 6.1 mm (slicing tolerance: middle). It should also fit the PL41, just check the diameter or spare part information before. The knob itself is bigger than the original to have better…
Um Einbau Steckdosen auf dem Tisch zu nutzen habe ich dieses Modell aus den 2er Steckdosen ge-remixt.
Shopping trolley releaser keychain on 10 CZK or 1EUR size
Remix of @NilsR_331850 "Magnetic Filament waste trash can for Bambu Lab P1P/P1S/X1C/X1E" to use 3/8" x 1/8" magnets.
Purpose / Problem Protect your LR3's Y limit switches. The LR3 Y axis limit switches are proud and prone to being knocked when LR3 is being stored/relocated. Spring metal arms on the switches often fly out and are a PITA to find and…
no tools or hardware, just slide the cover to snap it together SCALE MODEL BASED ON UR FILAMENT SHRANKAGE RATE i use petg 100.3 abs 100.6 pc 100.8 I do not consent to the sale of this model or any of its remixes in digital or physical form.
Connecting locks Individual streets are interconnected by connectors, which act like locks. In certain instances, such as with small roundabouts, it is advisable to utilize a connecting street without a locking pin. Connecting streets are…
Layer 0,16 - with support. My first test print is from PLA, second from CPE HG100
LowRider v4 CNC - Buck Converter Tray for Ryan's (V1E) Jackpot CNC Control Box for the LowRider 4 CNC . A buck converter can be used to provide 12v to a 12v fan, even if your power supply is 24v. It can also be used to under-volt LED…
It's a holster for your Casio fx-991EX Classwiz. Designed to hold it without the cover, though I've included the f3d file should you wish to modify it to include space for a cover. Designed for use with T-slot nuts. I personally like…
This is a 156x156x184mm (WxLxH) piggy bank that is moddeled after the BambuLab X1Carbon CoreXY 3D Printer. This is about a 1:3 scale down from the original printer. The Idea comes from jpbruce , but this is my Version of an Bambulab…
50mm OD 27mm Tall Volume knob for 6mm potentiometer shaft.
AC remote controller holder
3D MODEL DESCRIPTION The toolbox adopts a modern minimalist style, with white as the main color and black as the embellishment,Perfect match for Bambu Lab toolbox storage. The Bambu Lab toolbox can be found in my release if needed - BAMBU…
Coin for shopping cart. Diameter: 24 mm Thickness: 2 mm Suitable for key chains.
CASIO FX-991es-plus 1:1 in cad
2023/12/14 UPDATE: - Created more accurate XY constrained v2 mount. - Modified to have more vertical spring/flex while making more rigid in XY by encasing the spring section. - Printed with PETG. - Requires printer to have decent bridging…
Mod has top-bottom split Y tensioner blocks enabling clamping to middle of the belt. So, the original Y tensioner block can always remain attached towards end of the belt. Meanwhile the mid belt tensioner can be quickly added and removed.…
I remixed the original design here to fit the magnet size that I have. The magnetic strength is just enough to hold on, I may upload a version here soon with a few more places for magnets too. Magnet size is now for 12.67mm x 3.2mm or…
Remix of dvoelkel's v4 design on Thingiverse (https://www.thingiverse.com/thing:1887963) to add space for a ACA1221ec heatsink. Printed at 0.3mm layer height in ABS with supports. Used textured steel sheet for nicer surface finish (see…
More details and discussion on real solutions welcome at https://forum.v1e.com/t/lr3-mod-diverting-shaving-piles-avoid-excess-shavings-in-under-bearing-wheels-causing-inaccuracies/34020
There is a cooling fan and Ethernet Cord on the X1E that is no longer blocked by this model
3D Printable Solar Filter – SharpStar 61EDPH V3 Description This is a front‑mounted solar filter holder designed specifically for the SharpStar 61EDPH V3 apochromatic refractor (61 mm aperture). The model is intended to securely hold…
Case for Casio CA-56-1ER hand-watch. It makes the watch shockproof and lets you customize it. Print instructions Category: Accessories Summary Case for Casio CA-56-1ER
Hello everyone, This is an universal design for a shoppingcart token,coin, trolley or whatever you call it haha. This model is based on 1euro coin and fits most shoppingcarts. Upload the stl to thinkercad (https://www.tinkercad.com/) and…
This is a base plate for the Bauer 19121E-B router that allows you to router at a 45-degree angle.
Keine Ahnung ob es sowas schon gibt, habe es neu gemacht. Falls es schon existiert bitte melden dann verlinke ich.
Created simple MGN12 linear rail stop at https://github.com/aaronse/v1engineering-mods/blob/main/mp3dp-v4/mods/z-post-stop/z-post-stop-v2.stl . Am using to help hold up printer build plate when tinkering. Recommend PETG or something with…
CKCS U1E PD65W 5521 5525 Fast Charging adapter enclosure. You'll need glue for assembly.
This build plate holder can hold up to four build plates. To install, simply lift the right side of your printer up and slide it underneath. The hook and tab are designed to fit into a groove in the middle of the right side of the…
Source CAD version of Doug Joseph's (Design8Studio) Lowrider 3 Control Box. I was looking to make a custom version of Doug Joseph's Lowrider-3 CNC Control Box to fit a BTT Octopus V1.1 and a few other bits and bobs… Unfortunately as Doug…
This is an adapter for my Roidmi S1E handheld vacuum so i can use the accessories from my standard vacuum.
Made it larger to fit the X1E complete hotend, added logo to cover Bambu Lab X1E 0.4 Nozzle Textured PEI Plate Bambu PETG Basic 0.20mm Strength @BBL X1C No Supports No Brim
A very simple cover to be mounted instead of an old school power switch. Use the integrated post to secure your wiring harness with a cable tie. The pictures shows two models, the „Tamiya TT-01E Power Switch Cover With Post“ and the…
Replaces the original 3 blade plate. For cleaner cuts and less noise. Pause print after ~7mm and insert standard M5 nuts
The SP511E LED controllers are cheap and good controllers for addressable LEDS. The controller can be reflashed with WLED. The programming headers are exposed, but rather small. This programming jig uses standart 1mm pogo pins to connect…
THG-11EB Thug for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • thg-11eb6.stl…
Voici un lithophane du vitrail de Zelda Windwaker. 1e modèle. Faites vous plaisir ! This is a lithophane from Zelda Windwaker’s stained glass window. 1st model. Enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Mount to fit A1e on top of the Christmas tree inner Diameter 6 mm hight is 8 cm cable channel on the back for easy mounting
Spy Protection Flap for Aukey_PC-LM1E webcam. For mounting the door on the frame, u will need a splint made of a cheap Paperclip. Cut that paperclip intro 2x 6mm straight pieces and insert them vrom both sides. Alternatively, it can also…
A wall mount to vertically mount the large brick build NCC-1701-E Enterprise by BlueBrixx vertically. The part is split to allow layer orientation in a way, the main forces are not pulling the layers apart, at least for the two parts…
Aqara FP1e tavana monte edildiğinde metal kısmını tavana vidalamamız gerekiyor. Maalesef Aqara'nın ufak bir tasarım hatası yaptığını düşünüyorum. Mıknatıslı kısım metale yapışınca metal kısım alttan görünüyor ve bu estetik değil. Ayrıca…
[Update 2026/11/08] Added aza-ptfe-guide-mount-sensor-v5.stl and aza-ptfe-guide-mount-can-ptfe-v5.stl to help support the existing PTFE guide better. problem: The earlier v4 mount relied on PTFE to support weight of the guide, over time…
I recently picked up the Zoom H1essential and needed a quick and simple solution to attach it securely to a small desk mic stand I already had. After checking out a few existing models online (thanks to the creators), I combined elements…
Wandhalterung für Worx Heckenschere
