91 modeli
Another great model uploaded to https://3dwarehouse.sketchup.com/search.html?q=starwars&backendClass=entity as a free download I like this model, but I'm guessing at about 5 - 10 kg's in plastic and 8 months to print. I might just shrink…
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
This model is compatible with the lego system.
This is a case that I Made to hold Trading cards, (Baseball, Football, and similar). It will fit around 275 cards of standard thickness. The lid sits on top, with a ridge that holds it on, but loose enough to be removable. Can be printed…
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a…
I uploaded the entire project in both STL and 3MF format and it can be found in the project: Victron Energy LCD Box
This is the size I'll be using with my Dodge Ram remixed body ( I'm going to re-remix this body but that's another story !) The tire prints without supports and without infill when put on the side. With TPU (depending on the brand) it…
Update V2: Thicker and with M5 threaded inserts instead of screwing into the print. Much more durable. I still recommend to buy a proper metal version. Text from V1 is still relevant. Pictures are from V1. You now need M5 threaded inserts…
This model is compatible with the lego system.
This model is compatible with the lego system.
works with K270 K275 K260 K200 models. Tested with Logitech MK270 and it fits perfectly like original. Print only with 0.1mm layer height.
This model is compatible with the lego system.
Standard 275 gallon oil tank. Scaled to 1 mm = 1" (1:25.3) Category: Model Furniture
.2 pla + 15%infill bottom brackets 20% top
This is a rugged type storage case. Interior dimensions are 275x225x75mm when closed. The gasket should be printed in a flexible material, such as TPU. The corner bumpers may be printed in TPU, or you choice of other material. The…
This design allows you to wall mount your Lego Star Wars UCS A-Wing horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed…
Very simple and basic design (lacking details) of wheel chocks for Bruder 2750 MAN Breakdown-Truck. They serve to stop the car from falling down from the breakdown truck.
This remix is just to hold the ASA 3mf settings and a gcode (you can only add a gcode as a user file). This is a MK2.5S gcode, but it should run on a MK3 just fine (and a MMU unit as long as you remember to load-to-nozzle before printing,…
Wall mount for the LEGO UCS A-Wing Starfighter (75275). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle so that fins and nose clear the wall.…
LEGO compatible 4275b Hinge Plate 1 x 2 with 3 Fingers on End - Hollow Studs
Mercedes-Benz LO 2750 Truck Clear-Finish Version, 1933-1936 At the end of the twenties, a new era of truck manufacturing began in the factory of Daimler-Benz in Gaggenau. Their plans were calculated and different. By 1932 they presented…
I didn't like how shallow the official handle is, the grip on it felt very cramped and uncomfortable. This design moves the hand lot further back, and straightening your index finger. In a sense, it holds lot more like a pistol now. It's…
Wall mount pieces for Lego set 75275 UCS A-Wing 2-piece set to mount Lego set to the wall. Wall mount is angled slightly to show the A-Wing set slightly tilted out, to give a different view then a head on/flat view. (Around 20 degrees) 2…
Hand grip for GSI creos mr hobby airbrushes with Tigger Type Double Action I have the model PS-275 but this will work in almost all models of GSI creos trigger type. Original from https://makerworld.com/en/models/486164#profileId-398839
Republishing a part that saved me some $$$ for my dyson repair. This design have been in my dyson since a year now and still working like new to this date. Thanks to Sulya for designing this one. *** Dyson Mini Turbo 967479-01 96747901…
Simple shallow box wth many uses. Me used it in kitched for some spices and utensils. Could be scalled. Print instructions Printer brand : Creality Printer model : Ender 3 v2 Rafts : NO Supports : NO Resolution : 0.2 Infill : 15 Filament…
This model is to connect the acer kv275k P3 monitor power brick to a multiboard system.
Very nice and detailed wall art silhouette of the classic 1966 Ferrari 275 GTB Size can be changed. I accept suggestions
For mounting the GPU 3 M3 Screws are needed. For mounting it to the case any small wood screws can be used. Thanks for the help @JakobFriedl_909762
Standard 275 gallon oil tank. Scaled to 1 mm = 1" (1:25.3) Made to use 1/8" rod for legs Category: Model Furniture
Sometimes it is necessary to mount the Victron Battery Switch 275 A higher on the wall or other surface. 20 mm and 25 mm. Printer with 10 % fill.
Multi-Grain Burr Assembly puzzle by Stewart Coffin (STC #275-A) Assemble the four pieces into the unusual shape shown in the photo. Multi-Grain Burr is surprisingly difficult despite having only four pieces, due to the unusual shape of…
EN: eBike charger holder Bosch eBike Battery Charger 36-4/1 (0 275 007 900) DE: eBike Ladegeräthalter Bosch eBike Battery Charger 36-4/1 (0 275 007 900) Parameter: Material: PETG or better Layer: 0,2mm Infill: 100% Support: Yes
This is a camera mount for the super compact camera + vtx vombo VM275T. It has a 10deg camera tilt. Right now, the initial concept is 0,66g. I have now the 0.43g lightweight version that is also snug fit. I just wanted people to test fit.…
Just like the original Hakko B2756 but you can print as many as you need now. I printed with 5 walls, 0.2mm height and 80-100% infill to add some weight to it. I debated adding a lead weight to it but with the tips in it it has enough…
The corresponding handle to this trunk door handle assembly: https://www.prusaprinters.org/prints/126661 The parts are split to get a good printing orientation for the "arms" that result in a strong print. Check the uploaded pictures for…
This is a detailed model of the Victron Battery Switch 275A 60V switch. I measured a physical switch with calipers and modeled the switch in CAD. The .step file contains the whole switch with original bottom plate, as well as a 3d…
One of my case's wheels wore out and lost the rubber wheel exterior, and I wanted a clean replacement that reused the bearings. This replaces the entire wheel, not just the rubber shell. I printed this in PLA+ I intend on trying it out in…
https://worldbricks.com/en/component/djcatalog2/?format=raw&task=download&fid=2644
Huwil Verbindungsplatte für Drehstangenschloss PartNo: 12.0724.ZUR.0002 / 12.0724.ZSL.0053 PS: I've attached the FreeCAD project file but tbh, it is not very cleanly designed. Buzzwords: Drehgriff, Drehgriffsicherung, Büroschrank,…
Wanted to lift my pc higher from the floor, made extenders that uses the same screw and rubber insert as the original. Designed to lift the PC 4.5cm from the floor. This might fit other Corsair Cases. I also included the original model…
The hood prop holder snapped on my Jeep Patriot, and I didn't feel like paying 18 CAD for a cheap injection moulded plastic part just because it was “genuine”, so of to Onshape I went. It took a few iterations to make it snap without much…
Use at your Own risk this is your break lever I would do some panic Grabs when not moving and make sure you wont just snap it. Boo for Tektro not making replacement parts available for something so damn simple. Hopefully it's helpful for…
Audi Q3 DPA 99551799802 Abdeckung, Scheinwerfer für AUDI Q3 (8UB, 8UG) - OEN 8U0955275E
My version of a 275 size quadcopter with foldable arms. you will need some 3mm bolts for the top plate. I use 30mm bolts and nuts with nylon inserts. Each arm needs an additional 2 bolts, 3mm x 20mm. the camera mount has a 1 part and 2…
This mount allows you to install a JBL BassPro Nano subwoofer and a Midland MXT 275 (maybe other MXT models as well) under the center console of a 2002 Jeep TJ/Wrangler. Subwoofer:…
This friction-mount shroud allows a standard 60mm fan to be mounted to the passive heatsink on Asrock C2750D4I avoton motherboard to increase cooling for cases with limited airflow. Print Settings Printer Brand: Wanhao Printer: Wanhao…
This is a tray template for use with a plunge router. Dimensions are 275 mm long x 180 mm wide. Template is 6 mm thick and the walls are 15 mm wide.
Bolts to a VESA mount (I used #10-24 bolts and nuts). Monitor's factory mounting post fits into slot. Can turn mounting plate upside down to elevate monitor a bit more (though you'll likely need to use a right-angle HDMI connector in that…
Box with divisors 275cm x 230cm x 70cm 2 files. Merry Xmas to all!
3D printed headphone mount that can attach to the slots on top of a Corsair Carbide 275R PC case.
This model was based on the “fan base for Amd Radeon Instinct MI8 (rage fury X) GPU” by @Hrumque. I made 5 iterations of improvements, and this is my final version. It has been customized to exactly fit a “CF1275-B30H-C002” fan found on…
Unterteilungen für die mittelgroßen Laden der MARS Svratka Kleinteilmagazine mit 136 x 275 mm. Die Unterteiler sind leicht konisch. Mit dem Radius nach oben auf die Druckplatte stellen. Gedruckt mit PLA, 0,2mm Schichthöhe und 3 – 4 mm…
This is a recreation of the mount that comes with the Midland MXT275 GMRS Radio. It features wider slots in the base to accommodate more mounting options, such as the Rugged Radios Toyota Seat Post Mount . The mount reuses the quick…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
The Sceptre Power Brick Bracket U275W-UPT is a meticulously designed 3D printable solution for mounting your Sceptre power brick under your desk. This bracket is engineered to provide a secure and stable hold, ensuring your power brick is…
This is a modified 4 point camera mount system made for the VM275t FPV micro camera and the cockroach frame, or any other "tiny Whoop" size quad. I wanted a 4 point mount dew to the FC always getting un-clipped, ruining the flight…
Hardware (bolt and nut) taken from the broken part off the Sienna.
I made these extended legs for my desktop (Corsair 275Q Carbide Series case) so it would pull less dust from the ground, as well as allowing me to clean underneath without moving it.
Moved things around and added a pre-charge button and led to it. Had to get creative with the busbars to make it fit, not the prettiest busbars. button: https://s.click.aliexpress.com/e/_c40G5HgV light:…
This slider (part number 627595), which is used to adjust the humidity of the VitaFresh vegetable compartment in my bosch fridge broke. I didn't want to pay the 14 Euros for the original spare part, so I modeled it myself. I designend it…
MIDLAND MXT 275 mounting bracket with holes, I printed in PETG for a little extra strength. Its a little narrow but works.
This is a replacement support bracket for a Nordictrack 2750 Pro. This goes on the support strut to lock the treadmill in the folded condition. Category: Replacement Parts
Do you have a PC in a Corsair 275R Airflow case? Does your cat constantly jump onto your PC and press your power/reset buttons? Well, this is the model for you. I have created this model specifically for the Corsair 275R Airflow PC case.…
Enhance your speaker hanging experience with these specially crafted replacement pieces, designed to seamlessly mount the speakers of your Philips MCM275 CD player onto any wall. These thoughtfully designed replacements serve as an ideal…
Got too lazy to find one that fit my tray and my ender3 print bed so i just made one instead. Fits 275mm dia. dehydrator trays and most filament spools. If your spool is extra girthy, just scale the model about the z axis :) Made the ring…
This is work in progress I have a dell h275p powersupply form an old dell optiplex. So i made a shell for a benchtop powersupply. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.28 Infill: 20…
This mount suits the CM275t all in one FPV camera and transmitter on copters with a 16mm electronics stack at 45°. The camera lens is centred on the craft so weight is shifted slightly off centre. The camera has 10 degrees of tilt which I…
Corsair 275R Front Mesh Stiffener / Spacer (Snap-In, No Glue) Are you tired of your Corsair 275R's front dust filter sagging and getting sucked into the intake fans? This is a quick, print-and-forget solution to fix that issue once and…
Fits nice and snug. Put a light coat of grease on the sliding surfaces and RTV silicone on the outer surfaces, as indicated in the render. Hardware needed: 1 x M3*25mm button head screw 1 x M3 heat set insert 1 x M3 size washer
Print 3 parts, try to optimize clean surface instead of plastic saving. To assemble it : -mount rear part on rc frame, fix it using 2 m5 washers -glue 4m3 nuts at allowed spaces -mount front part using 2 m5 washers -add central part and…
A box with 8 removable bins , one for each standoff type. Every bin has 6 compartments: M2 · M2.5 · M3 · M4 · M5 · M6 . The lid has an engraved title. The set also includes 275 printable standoffs and spacers in lengths from 5 to 25 mm.…
This is the non-USB model
This is a recreation of the mount that comes with the Midland MXT275 GMRS Radio. It features wider slots in the base to accommodate more mounting options, such as the Rugged Radios Toyota Seat Post Mount . The mount reuses the quick…
Got too lazy to find one that fit my tray and my ender3 print bed so i just made one instead. Fits 275mm dia. dehydrator trays and most filament spools. If your spool is extra girthy, just scale the model about the z axis :) Made the ring…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Simple monitor shelf modelled to fit the angle and front lip on the BenQ RL2755-B (or ZOWIE RL2755) gaming monitor. Split into 4 sections for easy printing and modular setup, there is Left and Right end pieces (with a rear lip as well as…
V1 of my variant to unlock more usable print area on the Ender 5 Pro, 275mm is what I have it set to now. Together with moving the brace closest to you down, you also get at least 255mm movement on Y as well. Downside is the Y motor…
This part mounts the no-name 2750KV multirotor motor linked below to a 6mm OD carbon fiber tube. The wires pass through the tube for a clean setup. https://www.aliexpress.us/item/3256805182582279.html The part also has a cavity which fits…
At work I got tired of people putting De'Longhi scoop all over the table so I designed this holder that can you can mount via double-sided tape of your choosing! In photos you can find for exactly what scoop this has been designed for. No…
This model is compatible with the lego system.
ORGANIZZATORE GT275 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
