Liczymy pasujące modele…
LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
This is my design for a 91mm tall by 84mm diameter hexagon patterned WS2812B RGB LED array, touch controlled, lamp. The LED array is 5 horizontal strips of 12 WS2812B RGB LEDs at 60 LEDs/m. I've used vase mode printing on the outer shell…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
For my kitchen Table i want between the two plates some led-stripes. To hide them i use this covers. I use 8 sideparts (Seitenteile) and 2 edge parts (Eckenteil). Since the table is not built in such a way that exactly 2-3 parts fit on a…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Modular 45x 17 mm WS2812B LED segments i.e. for WLED . The bases are designed with 45° steps stands to be able to light your object how ever you need it. It is designed to be printed with minimal filament which leads to a not so sturdy…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Hello there this a remix of the famous Moon Lamp for the use with WS2812B Led Strips and WLED (NodeMCU ESP 8266) to controll the LEDs. Moon Lamp Diameter approx.: 154 mm / 6 in Hole for the screwable LED Strip Mount approx.: 52mm / 2 in…
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
I found a great tutorial for electronics that was missing only the case. So I started modeling. Many thanks to Crazymakers for their work and sharing. Link to the video : Link to the website :…
I needed a simple clock in one room, so I designed one. 24h display to be equipped with WS2812B LED-Strips with 60LEDs/m. Each digit will need 15 LEDs, two on each segment with one LED hidden between to segments. I did a lazy wiring job,…
Print it laying down. put the leds in the slots and wire it up. diffuse it from the front side
Two methods for fixing the channel , holes along the center, and tabs on the side, these are 190mm long. I printed these in PLA, flat on the bed with supports everywhere, might get away without supports I didnt try. The led strip I used…
Just another seven segment LED clock. Current version of SW working, but it isn't final version. What is working: time on dislpay synchronization from NTP server time in local time zone. This zone must be specified manually on source code…
Remix (resize) case for Generic 8 x Neopixel (WS2812b) Stick / Bar - Case - WS2812b-8 Support me at: Buy Me A Coffee Original model did not fit these generic Neopixel 8 Bar / Sticks I found on aliexpress, had to resize. Aliexpress Amazon
RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…
Wordclock Matrix 11x11 Frame for WS2812B LEDs. LEDs can be simply clipped into the frame. For the Wordclock Frame i use a IKEA Ribba 23x23cm Frame https://www.ikea.com/at/de/p/ribba-rahmen-schwarz-40378401/ Source Code for this project…
This is a simple mount for 10mm wide WS2812b (often known as neopixels) to mount along 2020 extrusion. It mounts the LEDs in parallel to the extrusion profile used. 100mm and 150mm lengths provided, as well as a .STEP and Fusion 360 file…
I have downloaded this file, and it did not fit the Siboor led lights I had purchased, Since I printed them on ABS, as it shrinks by around .5% on this long piece it was 2mm too short, so it was remixed with those tolances in mind, and…
The clock is based on WS22812b addressable LED strip and WEMOS-D1 mini (ESP-12F) board. In my case it is running the ESPHome software in combination with Home Assistant (see link below). Fusion 360 files are also available. To get result…
3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
I have been having a hard time soldering the LED with the jumps due to many movements that make me solder my hand with the table. None of the solutions that I found were proper to my case, I wanted something straight forward that holds…
The first version published here is a rather minimal case with a surprisingly effective diffusor for one of those quadratic LED matrices you can get on Aliexpress with 256 WS2812b LED on it, 16 rows a 16 lights, spaced in a 10mm raster. A…
This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…
I had a bunch of WS2812B modules lying around so I decided to make this gear/flag display. If you don't have any of these modules you're probably better off ordering a 8x8 matrix and using that instead as there's less soldering to do, but…
It 's a remix with wider socket for WS2812B led strip. All parts and dimensions are the same like in original project.
I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. Two…
This is a collection of WS2812B LED rings that I modeled in Fusion 360. If they can be of use in your modeling or just need a stand in before your LED rings come in the mail, here's the STL files I created for my project. Hope it helps…
The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…
7-Segment frame and transparant segments. Size 27 x 47 mm. WS2812B LED display behind the segments needs only one control wire for 28 segments. Arduino : Segment arranged a-g clockwise. Adafruit library. byte…
I wanted to replace the tracing paper diffuser with a 3D printing diffuser.
Simple and quick print (32min for 12 pieces with a 0.4mm nozzle) to hold WS2812B strips or any other LED strip with 10mm x 0.4mm size. The slot has a depth of 0.5mm, so please take care of elephant foots. I printend them in PETG Jet Black…
This is a chamber light mount for the Voron 2.4, 300mm. It uses standard 10mm wide, 3mm thick WS2812B type neopixel lights. Each section is 6-3/8" long (161.9mm), and is attached using two m3x8mm socket head cap screws and two m3 t slot…
A quick project to build a home automation remote control for kids. My plan is to program the included ESP8266 for sending button triggered MQTT messages to a home assistant server over WIFI. This ESPHome code is a good starting point for…
runde Neopixel Uhr https://youtu.be/7\_WXX9sdJPA benötigte Druckteile (schwarz oder andere "nicht transparent") 4x Oberteil 4x unterteil 1x Aufhänger 12 Uhr 1x Stützer 6 Uhr 2x Stützer 3+9 Uhr 1x Halteklappe (klar / transparent) 12x…
IT IS STILL A WORK IN PROGESSS, it works, but i wish to add more improvements. I will continue as soon i will have time, i have just moved home after 3 years, there are more important things to get done around the house. Plus new…
I add the WS2812B LED HW-335 circle 3 bit module
Lötstellen Sicherung, für einen WS2812B Pixel LED Streifen, 3 Pin, 10mm Breit (innen) 12,6mm Gesamtbreite 4 mm Hoch 17mm Lang
I have already seen such a lamp a few times and thought it was great. I still had a aluminium profile, a WS2812 / LED strip and the power supply, so I designed myself a base and assembled everything. The "intelligence" is based on a…
Exactly the same, just modified to hold 2 more matrix screens for a total of 8x24 matrix grid. Use with iFlag as Simhub doesn't support multiple matrix's paired together. WLED also works really well with this.
Print the first 2 layers with a translucent material and the rest whatever you desire. You could print the entire thing in a translucent material as well. I used a PLA/Wood Fiber blend. This was designed to diffuse the LEDs in a 16x16…
reduced size of original for smaller led matrix
This is part of a bigger project, probably will add the other parts bit by bit.
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
holds one D1 Mini V3 NodeMCU ESP8266EX
WS2812B 10001000 You are heavily addicted to addressable LEDs? Then this is the right coaster for you. Or use it as a deco object on your workbench. The package is 10001000, so 20 times larger than the original 5050 WS2812B. Equipped with…
A simple design for a mount for WS2812b (neopixel) LED strip for the Sapphire Pro. The holders are mounted on the left and right side ot the printer, via T-slots (M3), at the height of the motors. The beam angle is 22.5°. 2 parts per…
Gantry mount that adds a WS2812B LED to the gantry of the Sovol SV06 using the screws used to mount the hotend to the gantry. Printing Layer height should be fine (≤ 0.2mm) to properly trap the LED, but otherwise prints fine with a 0.6mm…
I adapted the models made by Sergio Morales to match my need. I didn't want to have to use an ESP8266 (I wanted to use an external ESP32 running ESPHome). I added holes for easier wiring through the back of the digits instead of running…
Printed with Prusament PETG Orange 0.3mm for the bottom, 0.2mm for the top no rafts or supports required. Alieexpress ring:…
Title: WS2812B 8×8 RGB LED Matrix Common name: 64-Pixel WS2812B LED Matrix LED type: WS2812B Matrix size: 8 × 8 Pixel count: 64 RGB LEDs Color depth: 24-bit RGB Protocol: Single-wire addressable Supply voltage: 5 V Board type: Addressable…
Similar to the original but works with generic LED strips instead of the custom PCB. The strips can be up to 14mm wide and is slid in from the back, similar to the diffusor. To mount, choose one of the clips from the original and glue…
Das ist eine Löthilfe für die WS2812B einzeln LEDs https://a.aliexpress.com/_B1ENvk Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black…
Simple diffuser for the WS2812B-64 Neo-Pixel Led matrix. Print: Material: Generic PLA+ Dimensions(mm): 69.8 x 71.8 x 4.8
This project was inspired from Steve Manley's work https://goo.gl/pHmpKE . This is for Chinese WS2812B rings that are equivalent of the Adafruit NeoPixel Digital RGB rings. This rings have slightly different dimension than their Adafruit…
These are Holders for the WS2821B LED Strips they have a grove on the bottom/ top dependending on how you hold them ; ) to allow the strip to sit in. There are multiple versions available if you like one better than the other. I have…
I use the WS2812b LED light strip a lot and could never get a connector out of the dozens of styles I have to work. So of course I made one. It works with PLA and just snaps together, although you will have to be careful. The wires should…
Optimized Translation: WordClock 23x23cm IKEA Ribba Project Required Materials: 23x23cm IKEA Ribba Frame If you test it with the HOVSTA frame, please provide feedback. ESP8266 NodeMCU 114x WS2812B RGB LEDs (60 LEDs/m, self-adhesive) 30AWG…
Fibonacci128 is a beautiful 86mm circular disc with 128 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
Mini-HEX ESP8266 Wall Light Für meinen Voron 2.4 brauchte ich drei Stück der Arduino WS2812B LED mit PCB. Da eine 100 Stück Packung nicht recht viel mehr kostete und man LED immer brauchen kann habe ich für die übrig gebliebenen eine RGB…
This is mount / holder for the 12mm wide WS2812B addressable RGB LED strip. You have to remove the top extrusion from the printer and insert the piece into the extrusion. From the front / rear the strip will be nearly invisible. For the…
pic1: take empty Ribba frame insert acrylglas in it pic2: lay white paper on it. I use think packing paper. pic3: insert “Frontplatte” and inner frame in it pic4: insert 16x16 led panel…
Display 8x24 dots case. Sourse: Бегущая строка своими руками | AlexGyver Rafts: No Supports: No Resolution: 0.2 Infill: 30% Parts: WS2812B 5050 RGB (60 leds\m) 22 x M3 bolt 18 x M3 nut Arduino Nano HC-06 Bluetooth Module USB-A Cable Tint…
This is a base for a small to medium moonlamp. https://www.thingiverse.com/thing:2955930 It holds an Arduino Nano 3.0 and a WS2812B 5x5mm LED module for illumination. A simple arduino-sketch is attached which is just a slightly modified…
Easy to print, i recommend using supports as manual and selecting the small interior flat spot and using Organic supports Materials: x12 3x2mm magnets (so you can swap pictures at ease WS2812B Addressable LED (132mm) USB WS2812B power…
Printed with Prusament PETG Jet Black 0.2mm supports are required for the bottom part. Uses a U type aluminium profile as found on Aliexpress: https://www.aliexpress.com/item/32879628265.html?spm=a2g0o.9042311.0.0.27424c4dWDKslJ
Ich wollte ein vernünftiges Gehäuse bzw. Fassung. Daher habe ich es für mich selbst entworfen. auch die Passform für eine WS2812B LED Ring war nicht perfekt. Jetzt sollte alles soweit passen. Ich habe für die Ansteuerung ein en ganz…
more RGB for more FPS??? 😁😂🤣 Rafts: YES for LED Lens Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Scale your needed size in your slicer! Print LED LENS in PLA in White or transparent and vertical with brim function
Quick model designed for this guide: https://handsonkatie.com/breathing-life-into-ornaments-the-smart-led-dragon/
Drop a Like if you download to appreciate the models i publish for free ! 3 panel diffuser for 8x8 64LED , used for WLED , also included is a quick bracket that attaches to the diffuser and clips onto 25x25mm aluminium tube with a…
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…
Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…
Original model didn't work well with the WS2812B LEDs I had, the spacing was off. Remade the model so that the LEDs sit in the middle of the diffusers(?). Only needed 10 LED strips for my set up, let me know if you'd like a longer one.…
Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…
I uploaded the step and F3D files. Made for this project GitHub - Serega88kos/BigClock By the way, m3 screws and m3 nuts are required to connect the parts
Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…
Fanduct for Goliath with LED strip WS2812B This model is a dedicated air supply for the hotend of the Goliath printer ( it also fits the Rapido hotend), providing effective cooling and aesthetically pleasing illumination on the nozzles…
LED Pixel Matrix aus ws2812b ARGB LED-Streifen und ESP32 Alles wichtige wie Bauanleitung und Programm (mit Font) ist im Projekt enthalten. Mit und ohne AMS druckbar. Das mitgegebene Programm wählt aus einer separaten Datei, die BEIDE auf…
To make nice LED art projects with ESP32 / ESP8266 and WLED or FastLED Software.
The LED switches are great, but the WS2812b makes it even better. So i designed a holder to replace the ordinary LED with a WS2812b. It's a addressable LED, you could dazychain. What's to do? Print the adapter in a neutral color (ore…
This is a housing for the 12 LED variant of this LED ring from amazon . It has slots for magnets, and I used those to attach it on the inside of my prusa enclosure. printing: to print I used regular PLA for the bottom and transparent PLA…
Enhance your IKEA Lack table with a touch of modern elegance and personalized flair using this custom-designed WS2812B LED under-glow strip. This innovative lighting solution merges functionality with stylish design, making it perfect for…
support pour antenne VTX incluant un support pour Buzzer et LED HGLRC
Obudowa do modułu matrycy 4 led 2x2 WS2812B RGB. Model składa się z 4 części: obudowa i nakrętka drukowane filamentem PLA uszczelka drukowana filamentem TPU (do swojego wydruku użyłem Fiberlogy FiberFlex 40D) szkiełko drukowane filamentem…
WLED AUDIO-REACTIVE LAMP WITH ESP32 (PCB + 3D PRINT + POWER BANK!) Looking for a WOW desk project for your workshop or an RGB gaming setup? 🔥 This build turns the iconic WLED logo into a fully functional 3D printed lamp, powered by ESP32…
I wanted a 32x8 LED matrix display to show relevant stats of my pool on a wall near the pool to not have to rely on an app or something to view water temperature for example. However the standard 32x8 LED displays were to small for my…
A modern looking desk lamp using a WS2812B LED-Strip with 60 LEDs/m and a ESP32 running WLED so you can use this Lamp as part of your smarthome. The Lamp is bright enough to use for things like reading or just lighting up your room…
Building various pixel LED models i needed the 8x8 matrix board to test models inside CAD so i made this model of the 8x8 matrix board that i bought on AliExpress . I have seen some other models of this same board on pintable's but they…
Printed with Prusament PETG Orange 0.3mm for the bottom, 0.2mm for the top. Supports are required for the frame hook part. Alieexpress ring:…
This kit enables you to use a 4-LED piece of 144 LEDs/m WS2812 strip as a backlight on your Apex. You can solder the wires on the back, pointing inwards and tuck them away in the provided cable channel. Make sure to secure it with some…
Add a vibrant pop of color to your room with this DIY RGB Neon Butterfly sign! This model is designed to house a standard addressable LED strip and includes a custom-fitting diffuser to create a smooth, continuous "neon" look without…
While creating the circuit board, I realized that a model for this LED didn't exist in my KiCadEDA. I searched for a publicly available model for a while but couldn't find one, so I created one myself.
This is my interpretation from a portable powerbox / powersupply for some WS2812B. On my Blog you can found a detailed buildlog with BOM and everything else.
this is just the box for pc light controler (esp8266 that controls case lights + power on + audio trigger) see here for pcb, code and instructions : https://github.com/Rayn2k18/pc\_light\_controler Category: Computer
A simple Spool design to store and control 20m of cheap WS2812B LED LED Strings from Aliexpress: Parts i used: LED-String: https://de.aliexpress.com/item/1005005806738119.html (choose “onlytransparent wire” and 20m) wemos d1 mini:…
I made a few things as modular as possible here. You can bridge the panels together, any number you want. You can use the feet as feet to mount it on a flat surface, or, you can even mount this on the wall and use the "feet" as something…
A small gothic chest designed to house an AtTiny85 development board with a microUSB port and provide space for three WS2812Bs split and mounted horizontally. The chest then uplights an object through the aperture, in this case, the Fancy…
### 🇬🇧 English Description A custom mount/housing designed for a 64-bit WS2812B 8x8 LED matrix panel. The design features heat-set inserts for a secure and durable assembly. Required Materials: * 1x 3D-printed front part * 1x 3D-printed…
To aim your LEDs, good for DIY ambilight
This is a soldering jig for WS2812B pixel LED lights. All the models I found were locked into a specific wire size, so I spent the afternoon making one that we could modify the wire width on. I have confirmed this works with 1.4, 1.3,…
