298 modeli
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
This is a Pantograph. It is used to copy a drawing at a scale, usually 50% (1/2). Simply follow the contour of the object or drawing to duplicate it at scale. Can be use to follow the contour of a part to transfer it on paper at scale.…
Nature Wall Art with 2 deer and 3 mountains The full model is 600mm wide, 300mm high and 3mm thick. There are also pre cut parts so it can be printed on smaller printers 200x200 and can be assembled later. I suggest assembling with glue…
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
This is a modified 2.4r2 300mm back-center skirt with a central hole for passing a cable through. There's a slot for a zip-tie to hold a the cable in place. Update 1 - Added a 350mm version
I liked the design so much that I made a 300 size version of it, and I haven't tested it yet
A 300mm. by 300mm. sieve with 4mm. square hole.
Just did a little bit of modifying to make the 300mm middle part from the original model printable flat on it's back just like the remixed 350mm version .
A 300mm. by 300mm. sieve with 11.5mm. round holes.
Border to sit 300mmx300mm square sieves in.
A 300mm by 300mm sieve with 5mm round holes
A parametric FreeCAD model with 60mm squares over the leveling touch points, connected with 10mm strips. Also that model exported 0.31mm high for printing with thick layers on wide nozzles. This should be useful on any 300mm square bed as…
This is a 300mm remix of the Rook 2020 DIY 3d printer using a Ender 3 bed. This remix adds a 2020 extrusion supported bed and x carriage as well as end physical end stop mounts for all axis's. This also adds a mount for a cheap 3.5 inch…
These files were based on MyStopidStuff 's Remix of RyanDam's Cable Management Duct for Voron Printers Version 2.0 in order to customize his parts to work within the confines of a Voron 2.4 300mm build. All my customized pieces are based…
Adapter to vent 4" (100mm) diameter ducting through my window. rectangle side is about 50mmx300mm Category: Tools
A two-tier bath or countertop tray organizer. Dimensions of the bottom tray are 300mm x 121mm. Top tray dimensions are 300mm x 75mm. Upper tray support brackets add 165mm to the height of the of the unit with final height to top of top…
Two types of lens hoods to fit Nikon AF-S 70-300mm or any other Nikon 58mm lenses Category: Camera
This is a focal stick for a 300mm f/theta lens. It has adjustability between 453-473mm, with the nominal focus range of a 300mm lens to be ~460mm. It is more rigid and requires only one M3 screw and nut to solidly lock in place (or you…
Bahtinov Mask for Canon EF 75-300mm with ET-65B
This is a remix of the Captain America Shield by @JBNeto.
This linear rail is meant to be a rough representation of an actual linear rail. The replica's carriage slides along the rail, but may be lacking the smoothness and may have a bit more play than the actual thing. That being said, the…
Hacksaw blade handle for 300mm metal saw blades (hacksaw). Print-in-place, efficient and heavy duty. Nothing extra needed. Everyone at my work had a hacksaw blade wrapped in tape in their toolbox. The tape handle was often inconvenient to…
PLEASE PRINT WITH TPU FOR OPTIMAL PROTECTION You may need to print with skirt to avoid warping. During my beginning period of FPV, my drone once crashed with the batt touching the ground, almost causing a fire. After that I realized the…
Holder to keep 300mm diameter, 103mm wide spools with 2Kg filament on track. Fit PC4-M10 PTFE coupler 2x Ball Bearing 608 z needed Print instructions Made of PLA 0,3 draft, 20% infill, no support needed.
Needed a base plate for my water reservoir. Printed with 4 solid layers horisontally, 5 layers vertically. 40% infill, no supports. Be careful not to over tighten M6 bolts.
Lense Hood for Tamron A005 70-300mm (62 mm). Hood may be mounted in normal position for use, or in reverse position for storage. Has detents which click on the small bumps in the lense's hood mounting tracks. I no longer have an original…
Update (4/11/25) : Modified Voron 2.4R2 Z-drives were added that seal off the bottom opening beneath the live shaft pulleys to provide a better seal in the chamber. Use the belt covers that will cover the area around the belt to aid in…
This is a lens hood for a Tamron A17 (ref. DA17), 70-300mm lens with Macro mode. I bought a camera that came with this lens, and didn’t come with the hood, so I designed one in Fusion 360. I designed it from scratch, as I didn’t find any…
Renault Master 3 Kambukka ETNA 300ml holder
What's better than a battery case? A battery BRICK. These battery cases are intended to be printed in TPU and sized for for 300mAh ‘stick’ style tiny whoop batteries. I recently replaced all my rolled cell BetaFPV 300mAh lipos with the…
Just to see if there was any more performance to be had. From the stock blades; +1° AoA at the tips, +4° AoA at the root, +25mm chord at the tips, added dihedral curve, and some winglets. Blades printed standing vertically, will need some…
This is my first model. Lens hood for Canon EF 70-300mm f/4,0-5,6 IS II USM Print Settings Printer: 3D Panospace One Rafts: Doesn't Matter Supports: No Infill: 100% Category: Camera
I have adapted the case from user Hero. once. Now it fits eight 300mAh Lava batteries and on the lid you can find the outline of Sailor Moon ( the case is for my girlfriend ) - of course only the bottom part can be charged, as it is…
Ready to use for your Dragon Railway (or any other dead rail S-gauge use) is this 300mm straight ballasted track section designed for multi color printing. This is the largest section that will fit on as 256x256 bed, sadly only one can be…
I loved the Vallejo Paint rack and wanted to swap out my HobbyZone holder. I changed the base model to have left and right sides that add up to 300mm. The new rack holds 110 paints where the HZ rack held 45 in the same space. When…
This 3D printable case is designed for the LoRa32 module (ESP32 with LoRa and OLED display) and includes space for a 1300mAh Li-Ion battery . The design offers protection and portability, making it ideal for outdoor or mobile IoT…
Remixed the angles of this wonderfully simple 150mm caliper holder to fit 300mm calipers better
Pretty simple mod. I wanted another keystone position than the original design's two. This became four just for symmetry, but the more I thought about it the more ideas I had. Ethernet, USB (or two), some panel mount molex micro-fits…
This is a “poop bucket” i designed for use with the excellent “Fixed Nozzle Scrubber” mod (https://www.printables.com/model/413177-voron-trident-fixed-nozzle-scubber) in combination with the “Nozzle Cleaner” mod.…
Second version is 2mm longer Split the model in your slicer and flip the lid. see photo. individual halves of model files available Lid infill should be high to help prevent any warping v1.3 changes: used fillets instead of chamfers on…
Infil 100%, 0.15mm PETG, supports - yes.
A little box to keep your FPV lipos organized in and outside your fireproof bag. You can put in 10 lipos. The fireproof bag has the following dimensions 21,5 x 16,5 x 14,5 cm you can buy it on amazon. I printed mine in ABS.
i needed a bahtinov mask for my camera lens, so i threw this together i designed this to go on easily over the lens like a cap, using only friction to stay on. the fit is secure and wont slide off
Side skirt for Voron 2.4 R2 350mm version with main switch. Second model is original back skirt with only AC input and covered hole of the original main switch. For those who has already printed back skirt, you can use a Switch cover so…
Holds a 300ml WD-40 Can on a HSW
Fan for cooling the Octopus BTT board; the design should allow the fan to remain inside the chassis
Updated version of the Voron 2.4 skirt. Holes in the skirt could be used for some skirt inserts (e.g. for filament sensor connector).
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
used photo of original hook as canvas, look to RMTB for original files, i will remade thread too, probably, as original snaps when overtighten edit: just uploaded remake of thread insert, rotate hole toward hotplate in slicer, it was…
Bahtinov mask designed to fit over the original, integrated lens hood on the Nikon AF-S Nikkor 300mm f/4. Tri-Bahtinov generated using the webapp generator from Satakagi . https://satakagi.github.io/tribahtinovWebApps/Bahtinov.html
These are my Flex steel bed end stop guides for Voron 2.4 300mm build, 304.8mm bed. I use the Mandala Rose Works Ultra flat 6mm bed. I didn't use the DIN 466-B spacers but my spacers are 7mm heigh. The height from the 2020 extrusion to…
Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…
"I am currently working on an Ender 3 Pro Switchwire Conversion, using the Enderwire design from boubounokefalos. I just edited the model from Maker Mike to fit the bigger rails. It fits vertically on my Bambu Lab P1S print bed in one piece
Introduction: This is the LK100, the 300x300mm version of the popular THE 100 printer by Matt the Printing nerd. I take no credit in the mechanical design of the gantry or Z-axis, as this was either altered from the original 1.1 printer,…
Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an…
Re-mix of https://www.printables.com/model/253005-voron-24-300mm-no-screen-skirt-mod/remixes. i've inserted the voron logo to the front as one peice and included a step for the mesh inserts. Here's a Youtube link on how to do in the slicer:
Battery box for the slightly thicker, taller 300mah batteries. Place the batteries horizontally for empty, vertically for full See https://www.thingiverse.com/thing:2515934 for the original. Print Settings Printer Brand: Prusa Printer: i3…
Bahtinov mask for Nikon Nikkor AF-S 300mm f/2.8 IF-ED (first version produced from 1996 to 2001). It will probably fits also IF-ED v2, don't know about the VR1 and VR2. It fits the rubber ring without lens hood.
This is a chamber light mount for the Voron 2.4, 300mm. It uses standard 10mm wide, 3mm thick WS2812B type neopixel lights. Each section is 6-3/8" long (161.9mm), and is attached using two m3x8mm socket head cap screws and two m3 t slot…
Works with either the original or my modified mount to work with stock panels Print 2 of the correct length for your printer, models are pre-oriented
Covers the end of a 300mAh 1S battery from getting damaged in crashes. Improves longevity of the life of the battery. May fit other 300mAh 1S batteries of other brands Part is showcased in video above.
Print the lower part with the gap for the blade laying on the outside of the handle, the top cover can be placed with the inside on the bed. Can also be mounted on both sides of the blade to improve cutting force, but reduce usable blade…
This is a tow release for the FMS Fox 2300mm V2 glider. It is shaped to fit into front cooling vent, and includes a channel to allow air to continue to flow through the vent. To complete the tow release you will need: 9g Servo - such as…
Modifying the PlateDimension parameter allows you to create a build plate of any size in Fusion360
Lidl POWERFIX Profi+ / PARKSIDE Clamp replacement JAW You clamped something too hard, didn't you. ... too hard for your OLD CLAMP! Because this one is (probably) much stronger! Replacement for broken Lidl POWERFIX Profi+ clamp jaw (300mm,…
My YouTube video: Stock mainboard, stock steppers, almost stock firmware(only changing max temp of the hotend) I've changed every printed part into Polymaker carbon fiber nylon(PA6CF) and added some mod, which is listed down below. Those…
I designed this thing to fly 1s300 packs on a Happymodel Mobula 7 frame. It has a good friction fit on the battery, similar to a mobula6/meteor65. It snaps in place so you can keep it in several packs in a row, and pop it out easily when…
A simple cap for the Mahle JV10 300mL Silicone Cartridge
Use these prints to replace the weak struts on this model. Note: This design is not perfect, but it works. I did not realise that the front strut is swept forwards slightly, so there is a very small bend in the strut. This has not been a…
Angled holder for 10mm LED strip that mounts to 2020 extrusion. Length is 300mm and it attaches with 6x 5mm T nuts . Simply print, attach with T nuts and slide the LED strip in place.
No supports needed if printed upright, but add at least 10mm outer and inner brims. To avoid warping slow down cooling for at least 10+ layers.
Gridfinity Vise-Grip 300mm-12in Adjustable Wrench Holder 8x2x4
This is a modified version of the Decontamintor Purge Bucket for 300mm allowing for the klicky mod. This is only the purge bucket, you will still need the brush holder. The original design along with the suggested klicky arm bracket would…
MGN9H An MGN9H is a compact linear‑motion carriage designed for a 9 mm‑wide MGN9 rail. The H‑block format is the longer, higher‑stiffness version, using recirculating steel ball bearings for smooth, low‑friction travel. It’s commonly used…
Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…
I was struggling to use the mount shipped with the frame to mount my Caddx Ant Lite w/ connectors. This modification lengthens the mount, so that you can grip around the connectors. In addition, the LiPo holder has been made slightly…
I designed this Z-axis extender to increase the vertical travel of my Lowrider 4 CNC (V1 Engineering) from around 100 mm to 250 mm, using 300 mm linear guides. The goal was to gain more clearance for thicker materials or tall 3D…
A fast bed level test meant to be observed live to be able to make real time adjustments. Overall size: 300x300mm The model consists of: Two thin frames to with a crossection of 1.2x0.2mm - which equals 4 extrusion paths a 0.4mm in width.…
Lenshood for the Nikon AF-I 300mm f1/2.8 in PLA black matte
Sooner or later after getting a new printer, everyone is getting “better” or different buildplates, for different materials, or just some that work. So after I got my K1 Max, I immediately got a PEI coated flexplate & an FR4 one, just so…
A handy shelve for storing shower products
These are my upgrades for the Creality CR-10 S5 500mm printer. The frame braces and spool holder uses M8 threaded rods and M8 nuts. The spool holder uses two 608 ball bearings The rods must be at least 72 cm long for the two braces and 15…
This is a quick remix of DsK_Printing's "Caliper Holder [Ikea Skadis]." The original design is simple and functional, but didn't allow my larger 300mm calipers to hang correctly because of the larger jaws. This version adjusts the…
The project started as a concept for a cylindrical “Trashcan” Chassis for the ASRock X300M-STX found in the Deskmini. The whole thing measures 225mm tall from end to end, not counting feet. 175mm in overall diameter from the widest parts.…
Mount for an e-stop button for a Voron 2.4 (300mm). BOM sourcing map Latching Emergency Stop button Printing Print in the orientation of the STL. There are built-in supports - these should break away after printing. If your slicer creates…
Its sturdy construction and minimalist design make it a practical and stylish addition to any wardrobe. Clean lines and a straightforward design for easy use and maintenance. Hanger is 300mm wide, perfect for smaller spaces or your…
300mm remix with reinforced 2020 rail mounts. Edit 2025-02-03: -added step file for 2020 mounts -added 2020 mount models in 3mf with 0.5 and 1mm larger tolerances for the 2020 extrusion by request. (Untested) -added 2020 mount tolerance…
Citroen Berlingo push in cup holder to suit 300ml and 500ml cans etc, also fits partner van
27 liters box. Just for fun
I semi-accidentaly bought a few spools of PETG filament on larger, 300mm diameter spool, then realized I don't have the infrastructure to print it. This is the solution come from the following desperation. Some of the parts are designed…
A welcome accessory to your home garden and printable on standard FDM printers and belt printers! 200ml and 300ml options to pick from. Submerge, plug the top with your thumb, and let go of the water on the plants that need a shower. I…
Update V2: Made the balance plug socket a bit smaller. Increased the width for the straps so it better fits on the geprc mk4. Printed with Esun TPU 95A.
描述 全新结构的itx机箱，仅供个人玩家打印使用, 当前禁止商用 （2024/05/04） 说明：LTX结构，3D打印+铝型材复合设计，结构十分坚固。 背置电源，需要使用90度PCIE延长线（10cm-15cm即可），支持下压散热器(67mm高度)/120水冷（顶挂） 当前未上传底部增高支架，将在稍后上传 材料说明 ：打印耗材(ABS/尼龙)，需要1000g或以上完成基础框架和面板打印，如只打印框架需要400g或以上ABS耗材…
""UPDATE GEN 2026: I apologize to anyone who tried this project cause it was missing the power button and the radiator side clear dome. I know it's been some time from my last posts, but life got in between and I got lost in it. If you…
I made this holder for my Bahco combination Square to always have it easily accessible. The model has screw holes so you can mount it anywhere. I mounted it to my french cleat system in my workshop. You can easily print this with every…
This is a 300mm diameter circle template for making a circle tray with 5 dividers. The inner circle is 100mm in diameter. The walls are 15 mm thick.
Features Ergonomic handle 2mm preload to keep the blade under tension stiff connection to allow for precise use Tested BOM 300mm hacksaw blade 2x D4-M3-L12mm Binding screws Print settings Insert solid layers: 33,34,35,42,43,44 0.2mm layer…
This massive 300mm extension tube for Canon cameras is a little bit over the top, but allows you to achieve ultra-macro magnifications beyond 1x using long lenses! (100mm+) It reuses the metal mount pieces from Kenko extension tubes to…
additional spool holders for Snapmaker A350 Enclosure 1x up to 300mm spools - left overhead frame mounting 1x for smaller spools - rear left below frame mounting you need per holder 1 threaded rod M8, 115mm length and 2 M8 nuts, M4x16…
Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…
![Caliper Holder [Ikea Skadis] for larger (300mm) calipers](https://media.printables.com/media/prints/638187/images/5045508_153381cb-8976-44ef-ace2-b2ddf493ad6e_3fada49b-c3af-45f9-b16f-0cd5204f53a8/20231105_112402.jpg)
