Liczymy pasujące modele…
There are no details here except those that you can print yourself. Supports should only be set when printing Base_gr and Base_top, the overhang angle of the support is 82 degrees, so that the support is not printed in the holes,…
A calibration cube inspired by my logo with features such as overhangs, 45/90 corners, bridges, clearances, support material, text, etc. Several models available for the various clearances clearly marked with text at the top of the part.…
Hi! I have a Prusa 30x30 calibration cube for you. By printing this torture test, you can verify that your printer prints bridges, holes, and overhangs correctly and that it holds all dimensions correctly. In the photos you will find a…
1st layer test by 0.2 layer height
T-slot Nut for 30x30 Prusa MK4 or I3 MK3S profile - Saves dismantling the frame. Integrated M3 nut. Recommended Print:- PETG Layer height 0.2 30% infill Vertical shells perimeters 3. Fusion CAD file included for you to modify and make…
I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…
Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles
Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…
Simple knob for radiotar valve with outer thread M30x1,5. On the inside top there is a recess with diameter of 20 mm and depth about 1 mm. This recess is intended for a flat piece of steel or any hard material to be placed so as to…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
it's useful for organize cables in the frame profile
Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case remix for a 30x30mm fan.
This is a remake of Wivry's box. Size chosen to fully utilize the available Bambu P1P plate size. (For utilizing the full 256x256 plate size, see instructions ) Height was chosen to coincide the official LEGO box height (150mm) You can…
Comes in handy when freezing multiple samples in liquid nitrogen. For an alternative design, please check this model: https://www.printables.com/model/1326290-eppendorf-cuvette-vial-holder-10x-25x
New 30x60 base for Old World
T-nut for 30x30 V-Slot aluminum extrusion like PRUSA MK3S (8 mm gap) compliant with M3 nut. I used them to install the Rubber Feet Support for Prusa MK3 by Volan on the PRUSA MK3S If you like it, plz post a make :) Print Settings Rafts:…
The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…
Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.
Background: So i built a voron, it uses a raspberry pi 4 as computational power for Klipper. RPI4B gets hot when not cooled actively, thus, i came up with a clip-on design that printed in one piece and let me just smack on a pifan &…
The original model is so good, I thought it was missing a little something on the front. I remixed the original design to incorporate the Nintendo Switch logo. Just import the .3mf into your slicer set up in multi-couleurn, I used a…
Corner protector for metal containers, things on coasters, taking the blow off sharp corners on furniture, etc. 30mm x 30mm x 30mm with 5mm thick sides Category: Household
This model fits 30 mm panels, 10 mm lip. Measure if this fits.
Cable Channel: - 20mm x 30mm, 20mm up to 320mm length in 20mm increments, 20mm Clip - 30mm x 30mm, 20mm up to 320mm length in 20mm increments, 30mm Clip - 40mm x 30mm, 20mm up to 320mm length in 20mm increments, 40mm Clip - 50mm x 30mm,…
30x30xXX profil tisk s co největší tryskou zkrátí o poznání čas
An adapter to use thermostats or smart radiator controllers (like Fritz!Dect301, CometDect and probably others) on radiators with Polytronic valve. Print in PETG or ABS because PLA is not heat resistant enough!
Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm
Am besten mit TPU drucken, damit er fester in dem Rohr sitzt.
It would be nice if you post your make. Thank you
Belt guard for X5SA 330x330
Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.
diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.
The Terminal Velocity 06 project is a conversion project aimed at bringing high speeds to SV06 3D printer owners. Originally developed as a branch of the ProosaXY, the TV06 has taken on a fully unique form now as it moves into full…
This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…
Remixed model made by sbonnes to use stock holder tube from Neptune 2* - to save both printing time and material. Also removed holes in legs to save time and made them 1cm longer. Trimmed to flat surface, so you can add rubber pads if…
There are threee options with different diameters. 12, 10 and 8mm.
I did not like few solar cable clips that I have tried, so I have designed my own that sits snug, clips over the panel edge, and hides the cable under the solar panel frame. It fits perfectly with HYUNDAI HIE-S440HG G12 which has 1.2mm…
I used PLA+ and printed the insert with 2 walls and 10% infill to speed the process up, should be around 4 hours. Insert should be printed face down to prevent need for supports. For the box and clip I used PETG and increased the infill…
Simple test to find out if your bed is level. This STL contains nine squares of 30x30mm each, 0,2mm high. Notice: Slice with 0,20 resolution Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0,2mm…
This is set of simple brackets to join 30x30mm aluminium extrusion profiles with 8mm slot (i bought mine on http://ehlinik.cz ). Except corner bracket all printable without supports. Print corner bracket in orientation provided in stl for…
Air grille / Rejilla aire 130x130 mm
I remixed another mount on thingiverse and adapted this for my needs, removing extra plastic because I wanted simple and slim design to add on an HD-zero whoop 25x25 board onto a 30x30 flight controller stack. Printed this in PLA+ 0.2…
Juego de la rana infantil con 8 fichas, es un juego de precisión de origen egipcio que consiste en meter las fichas en la boca de la rana, gana el que sea capaz de introducir mas fichas en la boca de la rana. Utilizo un PLA color verde…
A thin cover for flight controllers. My frame is very tight and my FC and ESC stack is very tall so I made this cover to stop it from rubbing against the battery strap. both 30x30mm (M3 stack screws) mounting and 20x20mm (M2 stack screws)…
For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…
Simply print in the given orientation. Do 4 Perimeters for ultimate strength.
DJI F450 Bottom plate for mounting FC with 30x30mm mounting holes Thanks to kjamimate Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…
Indoor Grow Pot for mini Grow Box (30x30). Pots will fit stable on base and are reuseable. If the base don't fit on your printer, resize both models with the same value. On Bambu P1P you can scale it down to 90%. Material: PETG or PLA…
enclosure for the Caddx Vista that can be additionally secured with m2 nuts and bolts to the mount, meant to be positioned on top of a 30x30 stack feet/spacers height is 3mm, the holes are intentionally a tight fit to keep it in place…
This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
A 60mm length of 30mm x 30mm aluminium extrusion
I needed an additional valve shutoff knob since one of the automatic ones was malfunctioning. Checked the dimensions and designed this knob. Important information for printing: Depending on your tolerances, you will need to scale the…
Just an other endcap for an 30x30 aluminum profile Print instructions No support No raft Printed with HD-Glass
I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part. If you already have a tap kit available, and don't want any steel in your part, this could be a better option than…
This is remix of Orange Pi PC case for 30x30mm extruded aluminum profile. Print instructions Category: Computer Summary This is remix of Orange Pi PC case for 30x30mm extruded aluminum profile.
These T-nuts can be used to bolt things to a 30x30 strut profile (as used on the Prusa MK3/MK4/XL). They're also useful for fixing things only temporarily as they don't make scratches on the aluminium profiles.
Als Fuß für die 30x30 mm Typ B Schienen. Gedruckt mit TPU - einfach aufstecken und gut is.
Dies ist eine neue Version der gleichen Idee, die schon von jay1992 gepostet wurde. Der Unterschied besteht darin, dass hier das Gewinde zum Anschrauben an die Heizung länger ist - bei meiner Heizung war das nötig, da sonst kein Grip…
Useful components for using with ALU extrusions 30x30mm. Print instructions You can use PET-G filament for better durability, but PLA also works well.
Shelf bracket in size 30x30x30 Print on the side for better stability. --------------- Regalhalterung in der Größe30x30x30 Auf der Seite drucken für bessere Stabilität. Hit Like, rate and comment!
The model has two variants: SINGLE PART - the rim is printed all at once many supports, no assembly needed low accuracy of the axle hole 2 PART - the rim is divided into top and bottom part (shown on photos) assembly with supergule or…
Das ist eine kleine wunderschöne Ring Box für Verliebte, Valentinstag, Verlobung oder für Hochzeit mit Herzlogo und verdeckter Innenscharnier. Sehr praktisch auch für Hosentasche oder kleine Handtasche zum mitnehmen. Für Lovers ein…
This part is compatible to the holder models at Water Wheel Holders - Wasserrad - Halter It is a rebuild of Watermill , but smaller in both dimensions at 30 mm radius and 32 mm width. A longer axis is supplied here at 50mm (which works…
I was looking for rackmount brackets / ears for an old HPE Switch which has a 30 x 30 pattern for M4 screws and all I could find were models with 25 mm distance. After printing a first draft, turns out 29 mm fits even better so I included…
Simple thing to allow low profile mounting of a 20x20 flight controller, or other item, into a full size 30.5x30.5 stack. I had several extra Nox F4 flight controllers and several full-stack quads in need of said flight controllers, and…
Done in Fusion360 because I could not find them online
Find out everything you need to know about the STC controller on my blog: https://nerd-corner.com/stc-3000-with-user-manual/ https://nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/ 3D-Model STC3008 from…
Der Würfel dient zum Kalibrieren ohne Boden, mit Kanten und Kurven.
3-axis square tube connector 30x30mm with M4 wood screw hole / Connecteur 3 axes de tube carré 30x30mm avec trous vis M'4. Use for my car's layout structure (camper box) and print in PETG. / Utiliser pour la structure d'aménagement de ma…
I changed the size for the Nut and the borehole to fit better. I attached a sldprt for solidworks if you want to change any sizes or diameters. Printed with Bambu X1C
Simple leveling test for 30x30cm Printers. Live-leveling is recommended. Recommended nozzle size is 0.4mm with a layer height of 0.2mm. Attached is a Simplify3D factory file for the CR-10s, use at your own risk. Print Settings Rafts: No…
A remix of Tom Stantons design, but I modified the rotor to fit 30x10 millimeter magnets. There are 16 slots.
Optimized for FDM printing. The retaining clips are unbreakable and have a slightly elastic shape.
UPDATE: Am Übergang zum oberen Rand hatte sich ein kleiner Fehler eingeschlichen. Nun ist die korrekte Datei als trichter_rund_reckig_repaired.stl hinterlegt. Ein kleiner Trichter, zum Einfüllen von z.B. Vogelfutter in den Einfüllkamin…
XYZ Calibration Cube 30x30x30mm
Equalizes the Prusa Mini base (5mm distance between the 30x30 profiles and the electronics box) to mount the printer on solid rubber mat/dampers or any flat surface. Replaces the sticky foam feets. Can be scaled in x-direction to match…
Paint holder platform for 30 bottles of 17ml. I'm attaching the gcode file that would print it as seen in the picture. However, I've printed it in a Anycubic Kobra. If you have a different printer, I would suggest to use the 3mf or stl…
This plastic clip can be inserted into the 8mm groove of a 30x30 aluminum "Bosch" profile. Insert the clip lengthwise, then twist it 90 degree to lock it in place. (No need to slide it in from the end of the profile) As printed the latch…
lego plate 30x50 studs
Introducing the Dumbbell Connector ! This handy 3D model is perfect for connecting two dumbbells together and turning them into one barbell easily. This connector features an M30x6 thread. I recommend using at least 50% infill for…
Replica of 30x173 GAU-8 bullet in 1:1 scale. I made it as box with srew top. I printed it from silk PLA with 0,16 layer
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
If you need to assemble some Bosch Rexroth profiles, then this is what you need. The premade G-Code, is made so that the bracket is solid PETG, as you want it to be strong i recommend using strong filaments and print them solid, if it is…
I couldn't find a full bed sheet test premade for the Ankermake M5. This one is 230x230x0.2mm the full bed is 235x235. If you want, you can resize them to 235 by using scale in the slicer, just turn off uniform scaling. The settings in…
A small collection of different length aluminium extrusions! Mainly for use in CAD, but feel free to do whatever you want :)! T-Slot 30x30 100mm 200mm 250mm 500mm 750mm 1000mm V-Slot 20x20 100mm 200mm 250mm 500mm 750mm 1000mm (Dimentions…
I tried a few, but they were too weak. This model attempts to put the material so that even if the print breaks, it should still keep material between the ridges.
Cosmetics basket 90x190x130/ 130x200x100 ŠxDxV (DxLxH) No support
Single hook fits aluminum frames with a 30 x 30 mm, 8 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.
Keychain Tag Gemini
30x30 Square Tube End Cap (With and Without M8 Nut Seat) Square tube end cap for 30x30 mm profiles, available in two versions : With internal M8 nut seat Without nut seat (standard closed version) The version with nut seat includes a…
SIMPLE MAGNETIC BOX V2 THIS IS THE FIRST VERSION printable without support, easy to print and strong final print with pla, i will publish the first print photos. MOUNTING: the cap snaps in place on the box with a little force. HARDWARE it…
This is a stand for picture frames. I inserted a 30x24 cm picture frame in it, but other sizes can be suitable. The whole model's size: 210 x 118 x 241 mm. (printable with an Ender-3) Recomended print settings: Supports: No Infill…
The goal was to create custom calculator covers so they could be color coded and numbered. Since these calculators just stay in the classroom, so protection was not the main concern. While they can cover the front, they were designed to…
Printed in Esun tpu 95A. got a little guide for antenna cable and a hole so you can see bind light of the RP1.
This is a nut I made to fix the scrubber of the nozzle of the heads of my TH5 prusa xl ( https://www.printables.com/fr/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu ) Insert a M3 nut on the side and then insert the nut…
