Liczymy pasujące modele…
The Logitech G535 headset features a swappable headband, but many affordable (and even some pricier) aftermarket bands tend to fit loosely and slip off easily. This small part provides a simple, reliable solution to keep the band securely…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
IMPORTANT 2024-06-27: I reconized an Error with the Upper and lower Wall: It is not straight! I will fix it ! You can print both files in a large printer flat, but do not rotate them on the front Side! Updated 2024-02-07 see below! Safe…
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes! The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) . The rim…
Model is a template I used to drill holes for the Ikea BAGGANÄS long handles installation on Ikea Forsand door. https://www.ikea.com/gb/en/p/bagganaes-handle-black-60338414/ SOME DIMMESNIONS: 320 mm (center to center) 5 mm holes 45 mm…
This model is compatible with the lego system.
This model is compatible with the lego system.
Holder for https://www.printables.com/model/843353-solder-scroll-ergonomic-adjustable-solder-tool
Make shure the material the final part is made of can withstand at least some heat ( i would guess it should be around 100-150°C. I used B07H5S9VP5 (ASIN, use search funktion on amazon) although the material could have been a bit stiffer…
A catch can mount point for N54 and N55 cars which mounts to the stock strut tower brace. Compatible with multiple OCCs. Compatible with Mishimoto Oil Catch Cans Below, or any that use that style mounting flange. MMBCC-CBTWO…
Silhouette / Silueta BMW F30 335I con medidas 52.4 x 12.6 x 3 cm
Oil Filter Wrench John Deere Z335E. 15 facet x 72mm for a nice tight fit. 3/8" drive. Designed in FreeCAD. Ender 3 v2, Generic ABS, 0.4mm nozzle, 0.2mm Layer height.
Schlauchadapter für die Klimaanlage Koenic KAC 3352 (printed upside down)
Deskpilot remix of this great inline Twin. https://www.youtube.com/watch?v=jK8ydLY5QHQ https://en.wikipedia.org/wiki/Dornier_Do_335 http://gunnerson.homestead.com/files/GeorgeGerdes/fms_models.htm 3D printable:…
Overview This wall mount is keyed for the stand that comes with the Lego set, making sure that the ship cannot move side to side. Printing This is a tight fit but works well on a 180x180mm build plate Both mounts are NOT identical, they…
This model is compatible with the lego system.
Náhrada 9V baterie za baterie 13350 z jednorázové elektronické cigarety bez další elektroniky. POZOR na polaritu článků! Články nabíjím v externí nabíječce. Při plném nabití je napětí 8,4V. 9V battery replacement for 13350 batteries from…
This adapter replaces the hose connector for the Koenic KAC 3352 air conditioning unit. It is best printed in PETG or better, as that hose gets hot and PLA warped in the application. Print Settings Printer Brand: Bambu Lab Printer: A1…
Replacement part for the HVAC air duck lever (LVL) gear for GM vehicles like the Chevy Cruze. Designed after the factory part with obvious strength improvements. Print in PC MAX, ABS or PETg. Since it is to be used in a car which can be…
Bottom plate for the Dewalt Jigsaw. DCS 335 or DCS334 compatible. I had two DCS335 with one of them missing the bottom plate. Made a spare one in ASA. This one installs with a single M8 bolt and nut. The angle can be adjusted to 0 or 45…
The original battery had soldered on cables. This replacement battery was way cheaper, but had no soldering tabs. So I needed a holder for this special sized battery. I checked a couple of designs here online and finally decided to make…
Toyota Gearbox Shifter Bush 33557-33010. It's described as a bush by Toyota, but really it's just a dust/dirt wiper designed to keep the sliding contacts a bit cleaner to help minimise wear. It's not an exact replica of the original part.…
Caster bushing for John Deere Z335E. (not yet tested in place) Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
My small router guide burn, this is a quick replacement if that happens to your guide.
This should allow you to use a Pixel Watch 2 charger in combination with the Anker 335 charging station. You'll also need a USB-A to USB-C adapter. The design features a small lip on the face of the adapter to stop the charger from going…
Replacement TV leg for Vizio TV. The numbers on the leg are P34T2335 and XLC01C0100 for a circa 2015 model. Three options Original 30 degree offset Straight Just the connector to add to your own print I printed upright with supports to…
I purchased the Anker 335 charger dock (www.amazon.com/gp/product/B09KY3QGTK/). It comes with a ring for an Apple watch. I tried the replacement ring by Nsganser (www.thingiverse.com/thing:5840925/) and while it did fit the charger puck…
it was a snug fit for me as original one is made of flexible material. if hard to get on just heat up with heatgun abit and it will fit
printed with PLA. works. with supports, part under stress, so a lot of walls are recommended. Scale 1000
The Do 335 , a unique German World War II aircraft, was a heavy fighter with a distinctive "push-pull" engine configuration. Its dual engines—one in the front and one at the rear—provided impressive speed (~775km/h), which made it the…
This is an ES-335 body-style guitar pick tray, inspired by my all-time favorite guitar. Available to download are multi-color (plate 1) and mono-color (plate 2) models in the designer print profile. Filament Used: -Bambu PLA Matte - Dark…
remix of a remix, of the original by alley cat. I extended the back by 5mm to make room for 2 13350 li-po batteries. These batteries are commonly found in disposable vapes.
Gehäuse für die Funkfernbedienung am Chamberlain Garagentor. Ist für die alte Version mit 433 Mhz, ob es für neueren Versionen passt kann ich nicht sagen. Wenn ja, dann bitte Rückinfo ;-) Die Knöpfe sollten vor der Montage noch ein wenig…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a case for the Waveshare IMX335 5MP USB Camera (B) , which is 2K USB2 camera with a microphone that works well in low light conditions. Low light means low light - it will not work in pitch black. This is a…
Details Cross knob (dt:'Kreuzgriff') according to DIN 6335 B, except for the hole diameters and the hex sockets. See Details below. 'DN' in filename refers to outer diameter in mm. DN63 - M8 hex bolt/ nut DN50 - M8 hex bolt/ nut DN40 - M6…
Kamera Halter für den Voron. Ich habe den Halter Konstruiert um die Kamera IMX335 von Svpro möglichst flexibel am gantry vom Voron 2,4 zu befestigen Am besten druckt ihr es aus ABS und im Winkel von 45° auf dem Druckbett. Ich habe es als…
This gauge supports precise routing of the jig saw by displaying the cutting line for DeWalt DCS 331 and 335. Just slide the gauge beside a router (e.g. a 3030 aluminium extrusion) and it will show we're the saw will do it's job. In case…
Vyztužený model držáku ruční svítilny PELI 3335R na zásahovou přilbu Dräger
Well, I coughed while resting my hands on the keyboard… and the rest/leg is history. Sturdier replacement leg for Perixx Periboard 335 (and possibly 535 too, although I have not tested). Supports fully extended or stowed position only, I…
This is a replacement handle for the throttle control of our cultivator Briggs & Stratton Lilli. I put a hole in the knob but actually there's no need for screw, my laziness inadvertently created a pretty solid built-in lock system. Print…
I have been building kites for many years, but when packing for my first kitemaking workshop I found that my essential sewing utensils are a bit different from what comes as a pre-made accessory kit for a Bernina 335 - so I made my own…
I'm working on designing a bracket to mount the VXL 3S motor onto the 1/16 E-Revo VXL, and it's required me to model some of the parts to use as references in the design process. I'm posting the model so that anyone can use it as a…
ORGANIZZATORE GT335 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This is a 3D-model based on the dimensions of a Tamiya part (19335209). The model is suitable for a M-type chassis, which is shown in the pictures. It is not 100% identical, there are differences. The hexagon interface is modeled 12,2 mm…
Useful way to reuse li-po cells from disposable vapes. the powerbank board used was 22.5w usb-c powerbank board from aliexpress. EDIT: (Once updated will delete the EDIT or mark updated) I didn't yet balance the cells so it isn't yet…
Lincoln 3350 welding mask - the regular one is just fine. 12 Volt Blower - this is the blower I used for my 12V USB-C Module - this is what you use to power the fan and circuitry Motor controller with pot - This is pretty easy to wire up;…
This front panel for the SCM SCR335 USB smart card reader fits in standard 5.25" PC slots. The smart card reader is mounted using the original case screw holes of the reader and two self-tapping screws DIN7982, 2,2 x 8mm counter sunk.…
It's a 355ml bottle holder that can be easily modified
I designed this to fit the natural curve of my Logitech G335 headphones with the plan of hanging them from the hard part so the ski strap portion can rest, but it should be similar to the curve of may others. Modeled in Onshape. I printed…
A bit of the clip broke, and rather than paying £10 for a replacement OE part, I decided to challenge myself to build one. It's a bit bendy with PETG, but does the job, and I don't have any ABS to test if that would be better. 100% infil,…
I created this after the original broke (see 2nd photo). No supports are needed, as i added them in the design (to help with the bridging). They easily break away. The grooves on either side might need a little filing down, depending on…
NUMERO DE PROYECTO: 33564. AUTORES: Fabio Martinez Mostajo - Nicolas Emilio Montero Gutierrez. ASESOR: Luis Augusto Ortega Zeballos. ESCUELA: La Salle Tarija Particular. CATEGORIA: Ciencia Aplicada.
Our Whirlpool front load washer had a drum baffle (Whirlpool Part Number WPW10283356) fall off during the course of normal laundry. This model is not an identical replacement, but has worked rather well as a replacement in our washer. I…
Audio-Technica ATR3350 Microphone
Gear shift lever part Daihatsu Sirion/Subaru Justy, Better fit.
added a hole to use original rubber so it wont move on my desk to much! thanks pavel for the original model!!
DeWalt Jigsaw Hook for Multiboard (DCS334 / DCS335) A simple hook that clips onto the Multiboard and holds a DeWalt 20V MAX brushless jigsaw by the shoe. Works with both the DCS334 (D-handle) and the DCS335 (barrel grip) since they share…
Panel for a Philips PM 3355 oscilloscope. Untested clips. hexagonal cavities are for M3 nuts, models for covers included. The bottom side needs clearance from the front end shielding clips. The display module aligns well with the window,…
Gemini 335L mount for my AMR Additional parts : M3 screw x 2 M4 screw x 2
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
Fasteners: 4 of each - M2x8 Hex nuts - M2 lock nuts (regular nuts can be used if camera is not moving)
Gridfinity stackable batterystorage (CR17335 3V) 1x1 gridfinity box for 4x CR17335 3V batteries. boxes are stackable to reduce space. I am creating these to store all my the types of batteries i use arround the house for my smart home.…
Gridfinity compatible organizer holder for the Titan 11335 micro 1/4 ratchet and bit driver set. Three walls, three top and bottom layers, and 15% gyroid infill is good enough for this model. Organizer in the photos printed with Creator…
It is quite terible tool actualy because the motor is too weak for the job, but why i uploading this if it is so terible? The locking mechanism of the adapter works very well, so if you want make your own adapter, you might need the…
Simple wall mount for the multimeter with a hook to put the cables on. What you'll need: - 1x Screw anchor with screw (Around M4 to M8) - 1x small nail (lower hole) The inner dimensions are 92x40mm (WidthxDepth). If you got a different…
This is the trigger locking pin for a Homelite d3350b chainsaw. I designed this based on a part I purchased. Fits and works great.
Charging adapter for my Amazfit GTR Mini to work with the Anker 335 Wireless Charger (3-in-1 Station). See pics for supports. Used parts from Sykytiskne 's Amazfit T-Rex Pro charging stand and Brandon Marotz 's Anker 335 Pixel Watch 2…
This is a compact storage box designed specifically for the HP PN M83354-002, featuring a sliding lid. It protects the pen during transport and keeps it neatly stored on a desk or in a bag. The model is easy to print, requires no…
I printed the tilt clamp out of petg, using the following settings: 0.2mm Structural, 4 perimeters, and 20% gyroid infill. So far it is holding up fine. I not sure if the height gear will be a perfect fit because I didn't print it. The…
Tool to help make the removal of oil filter easier on John Deere Z335e zero turn mower
SEL-3355 to accept SSDs mounted on SEL-3360/SEL-3350 Sliders For People who work with a lot of different SEL computers NOTE: SEL has a great warranty, but if something were to ever cause it to be voided, self-modification of the enclosure…
It fiths rather tight so you may want to remove 0.1 mm from the edge. Category: Tool Holders & Boxes
Little story about this model: I bought broken Brio Train station toy second hand. The battery cover was missing and it looks like someone was opened the battery cover without screwdriver, so it was totally messed up. Luckily the hingepin…
These brackets are used to hold EBOX-335X mini PCs in a custom rack-mount tray for bulk activation. These were made for the newer USB-C type units, not the older mini-USB or micro-USB type Uses the power cables included with the pc, and…
Little hands struggle with turning knobs, this adapter makes it much easier to turn.
JPG Design3D Dichtung für den Polaris Luftfilterkasten 5813359. Drucken in TPU oder anderen flexiblen Materialien. 3 Wände 15% Infill 5 Top und Bottom Layer
This is a 3D-model based on the dimensions of a Tamiya part (19335209). The model is suitable for a M-type chassis, which is shown in the pictures. It is not 100% identical, there are differences. The hexagon interface is modeled 12,2 mm…
Little story about this model: I bought broken Brio Train station toy second hand. The battery cover was missing and it looks like someone was opened the battery cover without screwdriver, so it was totally messed up. Luckily the hingepin…
Lincoln 3350 welding mask - the regular one is just fine. 12 Volt Blower - this is the blower I used for my 12V USB-C Module - this is what you use to power the fan and circuitry Motor controller with pot - This is pretty easy to wire up;…
DeWalt Jigsaw Hook for Multiboard (DCS334 / DCS335) A simple hook that clips onto the Multiboard and holds a DeWalt 20V MAX brushless jigsaw by the shoe. Works with both the DCS334 (D-handle) and the DCS335 (barrel grip) since they share…
This is a 50% scaled, string version, of the Gibson ES-335TD 12-string guitar, circa 1966. The strings are all printed in place and it is purely decorative. I have also designed a stand for it to be displayed on. It is an exclusive for…
These are made for 3 bladed props - won't work with two blades. I used an FSK 9x7 turning normally in the back, and a GWS 3-bladed reverse prop at the front. They weigh around 7g (latest revisions are 4g) and I just superglue them right…
This is the front intake. Other parts also uploaded. Print instructions Category: R/C Vehicles
This is the front exhaust, other parts available. Will need to assembly the exhaust stacks into the shroud and cut holes in the airplane to fit it. Low temp hot glue works well. Print instructions Category: R/C Vehicles
Exhaust stacks print separately. Just press in, CA glue if you want (though not needed). Cutout in airframe necessary to fit and hotglue in. Print instructions Category: R/C Vehicles
Scale cowl of the Lanyu Do-335; Enjoy! Print instructions Category: R/C Vehicles
