Liczymy pasujące modele…
Hello Here is my biggest project. It is a complete 3D model of Jawa-ČZ 250/353.02 motorcycle, made in 1955 year in Czechoslovakia for export. The creating of the model took more than 6 years because i have not any blueprints and all part…
The Singer 353 ‘Starlet’ is getting on now and one of the parts that have perished and gotten brittle over time is the feet. Four feet take about 15 mins to print.
The Singer 353 ‘Starlet’ is getting on now and one of the parts that have perished and gotten brittle over time is the feet. Four feet take about 15 mins to print.
This model is compatible with the lego system.
After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…
If you own a Makita Roebuck Electric chainsaw. This chain tensioner cover is probably broken due to the poor placement on this early model. The area collect lots of dust and likely messes with your chain lubrication. So I decided to…
Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html Use 3x M2.5x4mm screw directly on motor rotating cage. Print D35XX pulley, Remove integrated support. (red…
Ein stabiler Halter für die MAKITA Kettensäge DUC353. Ich empfehle die Akkus getrennt zu lagern, da gibt es gute Halter zum Download. Benötigte Schrauben: 4 - 4.5 mm, Senkkopf, Länge nach Bedarf Material: PLA Auflösung: 0.22 mm Kein…
This model is compatible with the lego system.
I wanted to use an RCelectricparts 3530-8 1400 brushless motor, but needed to shorten the spline and adjust the motor bracket. I transferred to Freecad, and modified. Freecad files attached. I kept the 2-part spline as the original, but…
I got my new Ambernic 353m and settled in for some psx RPGs, but the awkward placement of the analog sticks demanded a printed grip ASAP. So I spent a weekend designing and redesigning and reiterating and protoyping until I settled on…
Origo návlečky jsou z pryže, já užívám měkčený plast. Na fotkách se návlečka leskne, ale písmo je dobře čitelné.
I designed these two 3536 brushless motor mounts specifically for an old Cessna 337 Skymaster ARF kit I never got around to finishing. This model was from Nitro Models which does not seem to sell airplanes anymore. I finally dusted it off…
SPINA DI BLOCCAGGIO LEVA APRI COFANO ANTERIORE COMPATIBILE CON AUDI PORSCHE E WV VERSIONE SEMPLIFICATA DA STAMPARE IN PETG RIEMPIMENTO 100% <<<<IN FOTO IL COMPONENTE NERO è QUELLO UGUALE ALL'ORIGINALE>>>> QUESTA VERSIONE è PIù SEMPLICE E…
I usually use 3536 Outrunners ( eg.Turnigy ) so the Motor Mount provided with the 3Dsets Torq - Model 19 ( Hustle and Megnetic Pack) is to short. I exended both accordingly Printed in Prusament PETG 3 Perimeter 15% Infill - PRUSA MK4S
Bmw E30\E21\E12 - interior dome light switch knob replacement. OEM-numbers: 63 31 1 363 234, 63 31 1 367 353 Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at the…
I did not like the position of my thumbs on the console with the typical grip, so I wanted to design a case that could improve this. It will protect the screen and can be stored while gaming as an improved grip. My goal was to keep it…
ORGANIZZATORE GT353 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Holder for https://www.printables.com/model/843353-solder-scroll-ergonomic-adjustable-solder-tool
3030, 3535, 4040, 5050 Gasket Kits for Convoy flashlights with a 9mm reflector hole. From the left, the first centre piece suits 0.9 & 1.0mm outer pieces, the second centre piece fits 1.0 - 1.5mm outer pieces. From the left: 0.9mm, 1.0mm,…
the landy 4x4 does not come with a 3 holes adapter to fit the Gearbox Pulley the one I made has 3 holes in Diameter 15mm Radius 7,5mm 3,2mm with 5mm inserts for original screws
This is a case for a Uni-T UT353 Sound Meter. It is designed that the foam doesn't touch any surface to prevent deformation. A drop of glue is required to glue the cover lock on the cover itself. Support material is not required. An…
This model features the distinctive "353W" badge found on the rear of the Wartburg 353W, faithfully recreated using the original font style. Designed for clean and hassle-free 3D printing, it's ready to go right out of the slicer. Use it…
Installation Instructions: Back Wheel for Philips FC9353 / FC9349 / FC9332 Remove the Broken Wheel: Use a flathead screwdriver to gently pry off the damaged or worn-out wheel from the axle. Clean the Axle: Remove any dust, debris, or…
Pinion part for mounting on brushless motors with three screws instead of four. used for 3dsets model buggy / buggster brushless variant while using 3530 motor. Shaft shift is probably often needed as well, after that this mount can be…
This model is compatible with the lego system.
This model is compatible with the lego system.
Fits well enough. Printed in PLA with supports under the overhang. Spare part for Volvo V70 2007-2013 Reference number for spare part 31353583 2
This model is compatible with the lego system.
. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…
19th Mar 2026: added an (less aggressive) alternate sear lifter. Use this if you are having issues with the blaster slam firing automatically when the slide returns to its original position. ___________________________________________ For…
Support de Lumière Haute Précision – Équipe 3533 Mekanos Ce modèle 3D a été conçu et optimisé par l'équipe de robotique de l' École secondaire Lucien Pagé pour répondre aux exigences rigoureuses de la compétition FIRST . Présentation du…
This model is compatible with the lego system.
To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).
After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…
If you own a Makita Roebuck Electric chainsaw. This chain tensioner cover is probably broken due to the poor placement on this early model. The area collect lots of dust and likely messes with your chain lubrication. So I decided to…
Dreo TurboPoly 353 fan doesn't come with a remote clip and even if I don't really need one, here it is.
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
Famous Art - Egyptian Pharaoh Akhenaten - 1353 BCE 3D printable model.
Famous Art - Amarna Period of Egypt, likely depicting Queen Nefertiti - 1353 B.C. 3D printable model.
Headlamp dust cap replacement for my car. Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Colorfabb PETG/nGen Notes: Print with full support. Post-Printing ============= Carefully clean up all the support…
Solidworks 2017 Part Category: Replacement Parts
Motor pinion and drive pulley for 3DSets Buggy with a FlashHobby D3530 1400KV Brushless Outrunner Motor. The drive pinion is hollow to slide over the motor shaft. Use a hobby knife to clear the thin cover over the hole for the motor…
Motor Mounts for the Turnigy Aerodrive SK3, 3536 size, 1400kV. Incorporates holes for the motor mounting screws. One is 90 Deg angle; the other has 7 Deg tilt off vertical. Print with the motor side (the side with the big hole) flat on…
Fibonacci128 is a beautiful 86mm circular disc with 128 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
A motor mount for plastic antweight combat robotics, modified from this fingertech blade mount https://www.fingertechrobotics.com/proddetail.php?prod=ft-blade-mount in order to fit the motor I purchased. Remix the attachment Point file…
Sport Cub S2 motor mount for Turnigy 3536 motor
knob on stirrer broke so I modeled a new one in blender. I printed 2 tone by pausing at layer 56 and swapping filament Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 50 Filament: 3D…
EN: Enclosure for Three-pole push switch IP 30, wall-mounted 35303-10 SK: Krabička pre : Spínač trojpólový stláčací IP 30, nástenný 35303-10 Designed for: https://www.emos.sk/spinac-trojpolovy-stlacaci-ip-30-nastenny-35303-10 Print…
As we started having problems finding curtain track gliders for a boat I modeled it in blender to print.
Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…
Bac de récupération des capsules Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: Medium Infill: 20 Filament: Ice Filament PET Black Category: Kitchen & Dining
Display stand for the retro gaming devices Anbernic RG353V and RG353VS.
%% update More beefy handle versions are added as v2. better experience for me. furthermore, no need to print with support. %% Initial release Ergonomic(?) adapter for the Ambernic RG353V. Initial release. Just tested. It needs printing…
This is an accu holder for the Worx Accu WA3536 Printed without support the way you can see in the picture replaced with version 2… fits better and is more stable
Basic Skadis mount for the Anbernic RG353V/VS. Supports needed for Skadis Pegs. Included STL, F3d, 3mf files. Used IKEA Skadis Fusion 360 Double Hook: https://www.printables.com/model/118225-ikea-skadis-fusion-360-models/files
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
Please respect the Licence the thing comes with! Thanks Thanks to user "Threat_Craft" who test printed the prototype, provided pictures and the dimensions so I was able to adapt the epic ultra to the RG353m as I don't own it myself.…
3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.
A display stand that can also hold a USB cable to charge the RG353V. I designed this stand to be used with the USB cable that comes with the handheld. To put the cable in the stand: First, insert the USB cable through the hole in the back…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
I intended to use my RG353M more as a console and was annoyed at the lack of printable docks for these devices online. Printed with 6mm walls and 5% infill.
Remixed the excellent adapter - motor mount designed by pmstick to properly fit the D3536 Brushless 1450KV Motor (https://www.amazon.com/gp/product/B084Q62BSK/) in Tarmo5. The motor mount (pmstick design) and pinion (supplied with the…
原版电机为4孔螺丝固定，DUALSKY 3530为5孔比同规格电机略短一些。后面固定坐也不匹配。 我修改了原文件中的[Pulley 1 - Motor - B] [Motor Mount]这两个，直接替换掉即可使用。
Plaque cache pour tenir les piles pour le réveil FanJu réf FJ3533
I made this case from scratch in OnShape for an Anbernic RG353M Print with bed supports. 0.2mm I used 3 walls, but 2 could probably work. Use 1.75mm filament for hinge joint Use Felt sticker inside to protect screen. You could also line…
Print any filament, 0.5 width and mount nvr. Cover2 for mount rtl8812au 150mw reciever. Drill holes for ant where you need.
WIP model of my NVR Case for use with OpenIPC FPV and Ground Stations. This case is a remix of W's case that he posted on the OpenIPC Telegram page. Thx for getting me started. This case features the following: 50x50x10mm 12v fan slot,…
This is a Anbernic RG353m slip case. It's meant to be used with felt lining to protect the device. Make sure you line all sides inside the case and the bottom bumber inside the case.
This is a snap case for the Anbernic RG353v. It's meant to be felt lined to protect the device and to create a tight fit. I used 1.2mm x 31.8mm wire brads for the hinges.
Housing, lampshade for Grove RGB LED Stick - LED RGB 10 x WS2813 Mini 3535. Print without support. White colour of filament.
Hello, here you are the 2nd part of my motorcycle. Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame In this case it is engine crankcase, the engine…
A friction/stretch fit TPU protective cover set for the RG353GV. Very slim and keeps it pocketable but protects the buttons/triggers Front and back covers work on their own, personally I usually just use the front cove
Here you are the 3rd part of my Jawa-ČZ 250/353.02 build. Hope the 2nd part was fun for you :) https://www.printables.com/cs/model/751984-project-jawa-cz-kyvacka-25035302-part-no2-engine-c Today it is complete neck and front fork covers.…
Link for grip : https://www.printables.com/model/469500-anbernic-rg353vs-grip
Ich habe es Stehend mit Stütz Struktur in Baum Form gedruckt. Es ist vorgesehen 6 mm Ruthex Gewindeeinsätze ein zu drücken. Das Leuchtmittel war wie im Original mit Soffitten Halterung angedacht .
Here you are the 4th part of my Jawa-ČZ 250/353.02 build. Hope the 3rd part was fun for you :) https://www.printables.com/cs/model/766034-project-jawa-cz-kyvacka-25035302-part-no3-front-fo The 4th sequel is quite comprehensive, so pay…
This mounting plate allows you to replace the worn out guts found inside the Dyna Comp DCF 353 PSU with a new Meanwell RPT-60A Power supply. The RPT-60A provides the 5v, 12v and -5v just like the original PSU. The PSU mounts to the plate…
This is a case I remixed for the anbernic rg353p or Ps because i could not find a case to keep it safe on our trip to Washington. I hope this helps others who cannot find a case to fit this device. Please print in TPU as it requires…
Here you are the 5th part of my Jawa-ČZ 250/353.02 build. Hope the 4th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.4 od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com The 5h part consist a big…
3 hole adapter for surpass 3530_V2 engine for 3DSETS SAKURA 240
Here you are the 6th part of my Jawa-ČZ 250/353.02 build. Hope the 5th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.5 - Under seat covers + tank od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com…
Here you are the 7th part of my Jawa-ČZ 250/353.02 build. Hope the 6th part was fun for you :) https://www.printables.com/cs/model/802455-project-jawa-cz-kyvacka-25035302-part-no6-rear-mud As usual the model part consist a big parts but…
Hope the 8th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.8 - Front mudguard + seat od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
I wanted to be able to have my RG353V plugged in and charging while on the stand, so I designed a slot that matched the port cutout in the grip (LINK here ). I also wanted to incorporate the Anbernic logo into design.
Hope the 7th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.7 - Wheels od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay…
The adapter it was designed for is https://www.amazon.com/gp/product/B08CDGHQWF/ but if you like i can make additional versions if requested, just send me a link. I didn't need supports but they may be necessary depending on your settings.
Finally I bring you the last part of my built. After this part you will have a complete 3D model of the SOLO bike. Of course, if you also want to own a sidecar or a winter fairing, you need to continue to persevere in the construction…
This is a bumper for the Proline 1/10 Chevy Nova No Prep RC body shell, it is contoured to support the front of the body and can be modified on the back end to suit your chassis.
Adjusted motor mount and drive pulley for the Avian 3530 Brushless Motor. These has a wider pattern vs. the stock parts.
Just a Wallmount for the Makita chainsaw DUC353. Print it in ABS or strong Material :-) Rate to support please THX
This is the car part number 735373420 Print instructions Category: Automotive Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: Prusa PETG Black
Flatten the bottom of the grip so that it could adhere to build plate more easily with just a brim and can print more reliably.
