Liczymy pasujące modele…
This is a remix of Wojciech Kawa cable holder. The original design no longer fit after upgrading to 3DFused linear rail kit. So I Remixed the file to make it work with the linear rail kit. I printed it with PLA at 100% infill with…
This is a mount for the Creality Sprite Extruder for an ender 3 with the 3dfused linear rail upgrade. I also have created a cable support / cable guide to protect the hotend cable from flexing too much. I used tree supports for both stl's…
Update Design updated to use M2x8mm screws instead of 6mms. Improved structural strength of replacement brackets Introduction The 3dfx Voodoo2 card has many small components and very fine-pitched main chips. I have personally seen too…
Many thanks to user a_h_adl on vogons.org for providing the original design files that were modified to create this final version of the fan mount. This has been designed to slide on nicely from the top of of the card (see photo for…
A local Farrier asked me to replicate the design of the 3DFarrier horseshoe interface, which allows horseshoes to be quick changed. Very interesting article about the inventor of this design:…
[Not my model – this is a reupload of this model , respecting the original license.] Original description: “Coral pattern earrings easy to print and pretty to wear.” These are a stylized coral pattern, quick and simple to print, and they…
### Description: I could not find any E3D Titan AERO cooling ducts for my heavily modded Ender 3 Pro with 3DFused linear rail upgrades, so decided to model my own version with good airflow and good visibility of the nozzle. Additionally I…
3dfillies Spool Storage holder Printed in .3 layers on MK3 Smaller version added to be able to print on smaller platforms, Handle added for easier opening. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
This is a remix of the Vertical Filament Spool Parts Drawer originally made by 3D-Printy, this version is specifically designed for the spools used by 3DFillies. I've included 2 versions of the Track parts that the drawers slide on: The…
I smashed together the improved belt clamp by Brigandier and the belt retention mechanism for the x-carriage of a Prusa i3 MK3S+ by Prusa Research. ~~I'm a bit concerned about the belts falling out over time, but so far it has not been an…
Work in progress 3dfx voodoo 3 card cover, fan holder. Compatible with 40x10 fan. Possible future revisions with different fan types. For the build need three M3x10 nuts. Print settings: best results will be to print it on the name tag…
Simple combination and resize of Bambu spools to include replaceable labels with multiple filament holding holes.
Stand with 3DFX logo for my Voodoo 2 card.
This is a mount to add the Voron 0.2 Mini Stealthburner to a Ender 3 Pro modded with the 3DFused linear rail kit. Link to Voron 0.2: https://vorondesign.com/voron0.2 Link to 3DFused: https://3dfused.com/product-category/linear-rail-kits/…
The 3DFused bracket ( first picture on the left ) is an unsecure mess. The original delievered thing broke right off when tightening the belt. After a reprint, the belt slipped right off under the bed. I'm tired off this. So I made an…
This modular system is designed to give a second life to the cardboard cores from 3Dfils filament spools. The model includes several printable parts that fit precisely into the core’s dimensions, allowing you to build customizable…
Some people have concerns with overheating these vintage Voodoo 3 3000 video cards with just heatsinks. I was not happy with other existing fan mounts, and I had a 50mm fan on hand, so I designed a fan mount that uses screws to mount to…
3dfx Voodoo - those were the days! :) “3dfx PC accelerators. There's a better way to game.”
This is a conglomeration of the SpeedDrive direct drive mount, the 3DFused linear rail mount, and the Hero Me Gen5 system (has the original Ender 3 mount points). It requires a pancake stepper (the StepperOnline one is what I used), as…
Upside down mounted camera holder. Rotate your camera view from Mintion Beagle mobile app. When you change from mobile, it will rotates also on PC.
Introduction I've collected a number of 3dfx Voodoo cards missing their brackets over the years. Of course I had to create replacements for them to make them functional again. Here is a convenient collection of those. My designs require a…
This is a small adapter plate for mounting the Microswiss NG direct drive extruder (I have the Revo pattern but they should all be the same) to the 3DFused CoreXY Ender 5 motion carriage platform. The countersunk holes are designed for…
I needed more space on the rail, as the original one is not wide enough. I built my own longer version in Fusion, maybe someone finds use for this too. The extra distance is 30mm. NEW in Version 2: made adjustment so the screw can pass…
Here is a bracket for the STB System Voodoo 3/Velocity card, which you frequently find on eBay missing the original bracket. Printing Print in the default orientation. ------------------- Preparing This model requires bending the piece…
I made this spacer to mount my extruder to the motor for my 3DFused Direct Drive bracket since the factory screws for the extruder were made for the thickness of the motor mount on the frame, which doesn't exist when you mount the…
This is for one of the dual gear extruders so you can mount it to the 3DFused direct drive bracket, or any other bracket that puts the motor to the front of the hotend. The specific extruder I made this for is in the link below. There are…
*****Updated 12/1/20 : I created a version that is 20mm taller than the original hooks I created. Both versions are now here. I made a taller version because the X gantry was too close to the top of the frame when leveling the gantry. It…
už Vás také omrzela 3DBenchy, tak tady je řešení na Váš problém. Model je navržen tak aby otestoval jak mate spravně zkalibrovanou tiskarnu. Přidaná hodnota modelu je to, že nemusí jen tak ležet na poličce ale dokaže plavat. model byl…
These are certain parts modded to allow for the Wii Nunchuck Grip to be used in 3DFreeman's WMP Vector. You may have to cut some prongs from the scope if you find it difficult to insert.…
This is a set of armor for the 3dfx Voodoo 4 AGP. This card has many SMD capacitors, as well as a very tall inductor - all are prone to physical damage. My own card had a broken trace that rendered it a piece of e-waste. I had to fix that…
This is a spool adapter for spools from 3dFils. The spools have a notch on their inner diameter that easily catches on the Prusa Spool holder. This adapter is designed to create a smooth contact surface and has an inner diameter of 45.5mm.
To be printed flat on bed, without supports. V3 untested.
Sprite Pro original cable holder is not fitting on place with 3DFused linear rail set. I made new one and used the 3djpco Filament Runout Sensor to tight the cable on place. ( Filament Runout Sensor w/ Creality Limit Switch by 3djpco -…
The actual and original files please refer to 3DFreeman Freecano sets, my pdf made by me just for clearer reference.
I could not figure out how to use the included Y axis stop mount, so made this one. Uses 2 M5x12mm screws with nuts. I printed in ASA, 30% infill. Holes for the mico-switch are not threaded, running a screw into each while forcing down…
Summary Customizable (provided Autodesk fusion 360 file) mic arm holder. Default dimension (STL file) : pole diameter: 33 mm arm diameter: 12.5 mm holder high: 45 mm To attach the holder to screen pole, use: M5 20mm screw (x2) M5 nuts…
So, the OG model requires bigger fan, my 40x40 would not fit, created this to adapt it. Frankly, my model is a hackjob in slicer, should be very easy to replace with your preferred fan grill design.
An adapter to mount a 40mm fan on the 3DFX Voodoo 3 3500 TV, this clips under the heatsink and screw to the two holes at the back using 2x2.5mm screws. Print with support under the hook. I used PLA, don't be me, use PETG.
I recently got the XYZ Linear Rail kits from 3DFused.com and after I installed it, I didn't have a place for my Raspberry Pi Camera to mount to so I modified another thing ( https://www.thingiverse.com/thing:2886101 ) and made it so it…
Remote control holder (x4) I was tired of having my remotes spread all over the living room (you know, kids)... I was tired of looking for them all the time (I'm a "one thing, one place" kind of guy)... I was tired of having to get up to…
Remix of the 3DFx Voodoo 3 3000 Noctua fan mount . Same idea — a dual Noctua NF-A4x10 slide-on cooler for the Voodoo 3 3000 — but the mounting and the shell are designed from scratch. Fastening uses the stock Noctua screws: 4 from the top…
Some people have concerns with overheating these vintage Voodoo 3 3000 video cards with just heatsinks. I was not happy with other existing fan mounts, and I had a 50mm fan on hand, so I designed a fan mount that uses screws to mount to…
An adapter to mount a 40mm fan on the 3DFX Voodoo 3 3500 TV, this clips under the heatsink and screw to the two holes at the back using 2x2.5mm screws. Print with support under the hook. I used PLA, don't be me, use PETG.
Introduction I've collected a number of 3dfx Voodoo cards missing their brackets over the years. Of course I had to create replacements for them to make them functional again. Here is a convenient collection of those. My designs require a…
Update Design updated to use M2x8mm screws instead of 6mms. Improved structural strength of replacement brackets Introduction The 3dfx Voodoo2 card has many small components and very fine-pitched main chips. I have personally seen too…
Just a small keychain thingy which I made as a giveaway for all participants who finish a particular “challenge” at our “LAN-Party like it's 1999” Booth at the Vintage Computer Festival in Zürich, complete with 3dfx voodoo PCs ;) I…
spool for 3DFox REFILL from Liberec and refill is selling in Liberec Srbská 497, 460 01 Liberec-Růžodol I
Spool key made to simplify locking and unlocking of 3DFOX Refill Spool . The teeth slide in the spool cutouts and the handle provides extra leverage you might need for fully locking the spool. Might fit other spools as well, however it is…
I printed it on a bambulab p1p and I was really pleased with the result. If you try it, let me know how it turned out - I'd love to see your versions. If you like the model, I'd be happy to like or remix it. And follow me for more…
Clips snugly onto a 1kg spool of filament sold by 3DFillies to hold the loose end of 1.75mm filament in place so that it doesn't unravel during storage. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill:…
I use 3DFox refills and I have a few spools left after SUNLU filament, but they are not the right size, they are a bit narrower and the diameter of the center is smaller => I made a reduction for that. 3DFox refill comes without a paper…
Uprights for Bambu Labs AMS 2 / H2D for use with 3dFusionLabs H2D AMS Pro2 Hinge Flipper Project. Designed to fit the above mentioned project with the newer AMS. Recommended to print flat on the build plate in your choice of higher temp…
This is a 3D printable spool winder if you buy 3DFillies ABS/PLA 1kg rolls and want to transfer it onto an empty UP filament spool for the Up Box. Power is supplied by a battery drill. I have included the .skp files for you to load into…
Print as many of the objects you can fit on your buildplate at the same time. I scaled the models up 50% came out great, but thats up to you =)
Just a small keychain thingy which I made as a giveaway for all participants who finish a particular “challenge” at our “LAN-Party like it's 1999” Booth at the Vintage Computer Festival in Zürich, complete with 3dfx voodoo PCs ;) I…
Protective rim for cardboard spool from 3DFox.cz Made for PRUSA MK4/MK3 Best material is PETG 15% infill No supports needed. f3D file for Fusion360 included. Remix allowed.
Dropped filament usage from 19 to 13 grams and printing time from 55 to 38 minutes.
print laying flat, no supports, best of PETG or hard TPU. PLA not recommended, will break on the slightest impact.
