107 modeli
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
This Gridfinity storage block is designed to hold a Dymo LetraTag label maker and up to 6 extra label tapes. It is designed to fit into the top drawer of an IKEA ALEX drawer unit while fully loaded. Based on and compatible with Zack…
Remix from zx82net Great Rugged Box. The latch and hinge are not change so you can use all of his different models. Ammo box for 50pcs x 9,3x62 Printed with Extrudr MF Military Green PETG and Prusament Jet Black PETG 0,30mm 4 Layers. Hope…
Collection of screws (ISO 10642 / DIN 7991) including : M3x 5, 6, 8, 10, 12, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Place on the bottom face when slicing!!! This model is easily printable without supports as long as you place it on the face of the bottom support (the hypotenuse of the right triangle) in your slicer. Put the Gridfinity organization…
I grew tired of having my wobble sockets roll around in my tool box, so I created a 3x6 gridfinity tray to keep them in place. The tray is tall enough to keep pieces securely in place on a tool cart, but shallow enough to fit in the 35mm…
Hi, Just posting a remix (done in Prusa Slicer!) to fit 3x6mm circular neodymium magnet. Original thing fits magnets with diameter of 8mm. I have a bunch of 6mm magnets so decided to fit one. Without the remix visualizer slides from the…
This model prints without supports, does not need a lot of infill (I think I used 10-15%) and works with the screws that come with the printer. You can use the extra M3x6mm Socket Head Screws that come with your 3d printer. (It is enough…
This version of Adafruit's Spaceship Earth accommodates common 6x3mm magnets and adds the proper depth to the tabs so you can press-fit them in with some needle nose pliers. If you prefer not using tools, there's an optional 6.2mm model…
This Gridfinity storage block is designed to hold a Dymo LetraTag label maker and up to 6 extra label tapes. It is designed to fit into the top drawer of an IKEA ALEX drawer unit while fully loaded. Based on and compatible with Zack…
I really liked John Mars ' model, but I found some of the smaller L keys weren't staying in the allotted spot when opening and closing the drawer I keep them in. So, as well as adding a lip to make them stackable, I made the recess' a…
3x6 Gridfinity holder for the Parkside crimping tool. Tool fits almost perfectly with a little bit of room. Model was to big for my printer so i had to split it in two parts.
Changed the files to use 3x6 magnets and removed the built-in supports, otherwise design kept as the original
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Die komplette Besteckeinlage ergibt sich aus je 2 großen und 2 kleinen Einzelteilen . Der Verbinder ist optional. Achtung: Die Einzelteile sind recht groß, prüft daher den max. Druckbereich eures Druckbetts***. Her die Maße der einzelnen…
Remix using 3x6 magnets and strengthened hinge
Remix of " Gridfinity Parkside crimping tool 3x6 " by xAqua I appriciate the great work of xAqua. I just added several compartments to the original model for storing little things, to improve the usage of space. If you preffer to display…
Differences of the remix compared to the original I liked V3 Precision's design but I didn’t have the large magnets he used, so I remixed it: 4x 3x6mm magnets Magnet holes are intentionally tight, you can adjust the fit by cutting a small…
Made using the gridfinity rebuilt openscad project. These two bins are the most common sizes I use for organizing my toolbox.
This is a remix of the Minecraft Double Chest model with 3x6 magnets. Since I only had 3x6 mm magnets available, I used the corresponding base model. I needed a small box to collect receipts, so I modified the top lid by adding a…
I love the model made by Jallim but I wanted the magazine to be removable without any kind of resistence, so I made a Version with Magnets Important: The magnets sizes only work if you scale the model up to 338% otherwise it wont work.…
Reloading tray for all calibers .223 → Suitable for 243 / 6,5x55 / 308 / 3006 / 9,3x62 etc Steps/stair design, for easier access to the brass casings. Print in desired filament, no support needed.
Who doesn't love BSI products! I designed 4x3x6 Gridfinity Holder for BSI (Bob Smith Industries) Glue, De-bonder, and Accelerator. Designed for: (5) 2oz Bottles (2) 1oz Bottles (1) 1oz Un-Cure (1) 2oz Insta-Set For those who are curious,…
I wanted to use the 3x6mm barrel magnets bought originally and same used for Catan magnet sets. I extended the walls to support 3x6mm diametrical magnet and they work well and have room to spin to align along the curved surface. These…
Nothing special. See title
This is simply printed without any supports
Rohová spojka k zahradnímu stanu 3x6m
A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.
For a complete unit you will need to print: 2 top parts 4 side parts 1 bottom part. The snap fit is tight and you may need pliers to force the connection. ASA is recommended if using hot test tubes. PLA is more suited for occasional spils…
A simple Stencil to make watercolor swatches for tin palettes. This stencil fits the following palettes: Small watercolor tin palette 12 half pans (fits up to 18 half-pans) Medium watercolor tin palette 24 half pans (fits up to 36…
like the 3 ones but taller
Lure with big lip 100sp 3x6mm steel balls , lure printing with Petg transparent , resolution 0.08 , without supports. Gluing 2 parts with superatack , you need to print centring pins for assambly lure together . enjoy
This is a 3x6 Center piece intended for use with Wall Control ( https://www.wallcontrol.com/ ) metal pegboards and the DDD Printable Wall Control System ( https://github.com/aderusha/DDD-Printable-Wall-Control-System ). in the DDD System…
This is a remix that uses 3x6 mm magnets as a connection to the printer backside. You will need 2 magnets. The tolerances allow the magnets to be press fitted without glue. The screw hole is still accessible, if you decide to srew it into…
Gridfinity Redefined (The gridfinity redefined style with the thumbscrew attachment) 1unit x 3unit x 6units - With label, divided sections. Printed 0.3mm layers, 15% infill, no supports needed.
I needed a larger modular storage solution for my MMSS Case designed by Jorge https://www.printables.com/@jorge_rui I made this from scratch trying my luck at OnShape. Started with Jorges standard 3x6 MMSS block, made it into a box based…
Supports: Doesn't Matter Resolution: 0.2 Infill: 50
A rugged travel case for the Philips Oneblade, two blades, and two combs, to take you all over the planet! If fins are unwanted, feel free to remove. model is to true scale. Hinge Joint is print in place, do not change orientation of the…
Second photo shows a cutaway view. The magnet holes are modified to be flat.
Gebrochenes Herz Perle mit Magnet 3x6 geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Gebrochenes Herz Perle / Cord stopper / Kordelstopper Höhe 24mm / Stärke 8 mm für Schnüre bis 5mm Für die Vollständigkeit…
Simple insert with a hole on the front for a 3mm (deep) x 6mm (diameter) magnet.
Easily mount your solid state drive or hard drive disk in your hard drive bay. These spacers work with any 2.5 or 3.5" hard drive. For use with M3x6mm Cap head screws. The spacers will work great if you print them with a .2mm layer…
This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The mounting hole for the…
This is a magnetic parts dish, for holding nuts and bolts, or anything that sticks to a magnet. You'll need 5 magnets, 3mm by 6mm. I have also designed a magnet installation tool that doubles as a short magnetic pickup tool. Both print…
I made this bin to fit my stud finder from Zircon. There is also a little extra room of about 5 mm at the top to allow for other models. It is a 3x6x5 bin. If you download and print, please share a make and review. Thank you and happy…
Found that the Remix from @ReneDifferenz_299585 are a little bit to low for M3x6 screws and the head of the shcs arent deep enough into the Holder. So i remixed it.
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
Středová spojka k zahradnímu stanu 3x6m
Designed and printed to fit my Bosch GLL30 laser line level. It is a 3x3x6 gridfinity bin with no top lip as the level protudes from the top of the bin so it is easier to remove. If you download and print please add a make and review.…
Will hold 2 packaging tape rolls.
3x6 gridfinity bin that holds the Canon RF 100-500 f/4.5-7.1 L IS USM lens. This bin accounts for the tripod collar when mounted above the lens. Bin might be a little snug, but holds lens well. This works with gridfinity grid system.
I added color swaps every ~15mm for my print
The bits have some tolerance, so you don't knock everything over when you take one out. The usual printing parameters for Gridfinity: 0.4mm nozzle, 0.2mm layer height. Printed with SUNLU PLA Meta.
3x1 through 3x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
Simple holder for 3 pieces of CO2 hose or any other with a 6mm diameter. The design is only slid onto the cover of the aluminum cover. Mounted on the edge 4x7mm Jednoduchy drzak na 3 kusy co2 hadicky nebo jakekoliv jine s 6mm prumerem.…
Holder for CR123 batteries in a SKÅDIS Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 Infill: 40% Filament: Das Filament PLA Black Category: Organization
DESCRIPTION Remix of : Blank Insert Reinforced Lids by ImprovedByDesign Tool Holder For Multi-function Tester - TC1 Compatibility: Compatible with size 2x3x6+ Double Lip Corrugated Gridfinity Light Bins and the original Corrugated…
Gridfinity 4x3x6 - 5 x 3.5 Hard Drive Storage rack. This is mage for hard drives with a ~25mm thickness. TODO: - Spacer clips for lower profile drives - Inserts for 2.5 inch drives
Made it just for fun. Looks good I guess. I made it in PLA but feel free to make it in other materials.
This keycap set follows the Ergo-L layout for 3x6 keyboards like the Corne. There is a symbol or letter in each of the 4 corners of each keycap, extruded. The extrusion could be painted. The keys also have a small depression in the middle…
**Please refer to the original model by Federico Maci it works perfectly fine. I just saw that the accelerometer didn't lay completely flat and wanted to add a track or slot for the pins. Since Federico Maci supplied the step file, I saw…
I made a large cutout to comply with the gap from the rail to the extrusion, suggested from the Voron 2.4 manual. I also made a recess to sit a m3x6 BHCS screw into it, so more thread is exposed under the cover. I tried to make a pull…
Created to help someone in need, likely won't be useful for anyone else
Similar to my "split radial ball bearing 4-40 x 3/8" but with metric screws, this ball bearing is designed in 4 sections so it could be printed with the raceway of each section facing up for a smooth surface. The ball bearings are…
This is a Gridfinity compartment for the UGREEN 65W USB-C Charger (3 Ports) It is stackable and need 1x3x6u space. Shown Charger: UGREEN Nexode USB C Charger 65W GaN 3X USB-C-Port Included: STEP, FreeCAD (1.1 weekly) and STL Printed in…
I found the original model and used it for a few different LEGO Speed Champion cars, although specifically for the Ford Bronco from set 76905, I needed a 3x6 brick, with a much taller base than the original. I also adjusted the studs to…
Small variation on one of the parts of great PEEVES' model.
Tough, common building material.
So for this Cover, I have tested is the Malaysia 3x6 One, The UK one is untested. And the 2x Hole is for super short Metel Buttom, something like this: Note You need a 22mm Metal Button.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ckSKtzmwNna Category: 3D Printing
zahradní stan 3x6m/garden tent 3x6m
2mm spacer to fit a M3x6 screw
Perfect for 4 ml Flasks, ependorfs or smaller flaks, it has 18 slots I
Holder was made by scanning perimeter of stripper (IEK). Also added only thing that fitted in space - screwdriver, but there is place for something else - you can modify model and add something else!
A practical 3D printable ammo box designed for hunters who use multiple rifle calibers. The box holds 21 cartridges in total: 7 rounds of 6.5x55, 7 rounds of .30-06 Springfield and 7 rounds of 9.3x62. The lid has a flat design with a wild…
54384 (wedge 3x6 left) Lego about 3 grams
Remixed to better fit m3x6 screws that I had on hand (mounting this to the extruder). Also changed the nut holes to be press fit. I don't use this with a BL Touch, but it works great even without it. The fan is mounted to this plate with…
Some simple racks for holding tooling or whatever else you can think of. Have holes for 2x6mm rare earth magnets to keep them from moving around in your toolbox or on your machine table. I printed them in PETG but anything you have on…
made this to hold a bug net on my window printed with TPU 95A make sure to pause before the last layer to put magnets in. uses 3x6 magnets they are strong through one layer of material, and the tpu is strong enough to prevent them from…
Large is aprox. 45mm in center dia Basic is aprox. 21mm in center dia Both have 2.5mm lips on the end to hold spool in place so the hole in your spools need to be at least 5mm larger than the center Dia. Two spool spindles for filament ..…
YAB - Yet Another BCAR ! Hi FPS, 3x6 and 5x6 versions at 8 degrees, 7 crush, with Silly Collet and Cover - slips on and self centers. The cover has tines on the inside that rest between the BCAR and the locking collet. Modified my…
Another storage box for Gridfinity, with a size of 2x3x6. Made for all sorts of things, in my case glass files. Other boxes are saving more material, but often have flimsy walls. SAnd I wanted a flat floor in the box,o I decided to build…
Remix of a bobbin tray modified to fit my need.
A pocket whistle shaped like a classic toy building brick. The outside is a 3x6 brick in true stud dimensions, two plates tall (2/3 of a standard brick). The middle row has one stud fewer to make room for a key ring hole, so it works as a…
I created this to block off a piece of extruded aluminum that you can see being pictured. Please let me know if there are any modifications you would like to see. I made the one in the photo with PLA, I would advise using a different…
Cell welder, solderer, glue and 3mm wooden screws are required. I added switches couse charging modules consumes a bit power from batttery while standby. Back female port is for charging. I use charger for gisam tools. For one battery…
I needed 3x3mm foam rubber. Unfortunately, the only self-adhesive version available was 3x6mm. Cutting it down turned out to be difficult, so I created this tool. While it doesn't allow for machine-like precision, it yields better results…
Heavy-duty style 3D printable ammunition box for 9.3x62 cartridges. Includes interchangeable hunting-themed lids with moose and wild boar designs. Made for hunters who want a practical and personalized way to store their ammunition.1 ×…
Cell welder, solderer, glue and 3mm wooden screws are required. I added switches couse charging modules consumes a bit power from batttery while standby. Back female port is for charging. I use charger for gisam tools. For one battery…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Collection of screws (ISO 10642 / DIN 7991) including : M3x 5, 6, 8, 10, 12, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
