Liczymy pasujące modele…
Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Tout est dans le titre, blower 4020, pour modélisation de projet…
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
The Ender 3 S1 has been a great machine so far except for the loud hotend fan. I had a spare 4020 blower fan so I designed this bracket to replace the one found on the sprite extruder. Even at 100% I've found it to be quieter than stock,…
This is a modification to the original ender 3 (not v2) to allow for it to mount the Stealthburner fan shroud created by the Voron team. It also comes with a small adapter to be able to mount an LGX Lite as its extruder. With how the…
This model is compatible with the lego system.
Simple model of fan cover with voronoi style. Space between fan and tall fan covers might help with noise reduction, i haven't really tested it.
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Lates update 27/07/25 Three air outlets (beta): a central duct has been added to complement the two classic side outlets, providing direct cooling to the nozzle and improved wraparound airflow on the printed part. Designed exclusively for…
After upgrading my Layer Fans to 5015's, the stock 2010 Diffuser Fan looked comically tiny. This mount directs the airflow of a 4020 Fan to the Diffuser. Note: The Fan just slips-in… No screws. If tolerances make for a loose fit, a dab of…
Updates: I made following changes to my Satsana 5015 remix for 4020 fans and BLTouch: Changed the position and the mount for the BLTouch. The mount is now on the left side and fully integrated into the shroud. Change the X, Y, Z offsets…
Ender 3 V2 Stealthburner V2 I've modified the ABS mount to be one piece instead of two. And Its assembly should be pretty straightforward. The hole gantry does not need to be dismounted. Or the Heatsink. Just put it on top and secure it…
Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…
This is a TinkerCAD remix for use on Ender3 V2 to reduce noise and maximize air flow: bigger intake fan opening with chamfered edge still no fan guard (not a good choice, if you have pets or young children) more exhaust side ports…
A Remix. I didnt get the Step files, so i had to edit it in Tinkercad. You will need 3 X M3 X 15mm Screws. I recomment to use Screws with small heads, so they wont interfere with the gantry. If you dont have any, you have to remove the…
An adapter to replace the 4010 extruder cooling fan with a 4020 blower fan. Has good clearance with the gantry, no change in build area. Mounts to the stock extruder with stock screws, 4020 fan mounts to the bracket with 3× M3×18 bolts.…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
This is not necissarily meant to be printed, but can be very useful when you develop your own designs in a 3D CAD application. Use this axial 4020 fan model in your custom 3D designs.
My modified version of NBR 's Ender 5 S1 cooling setup ('El Pablo'). This is to suit the mods I'm currently running including dual 5015 part cooling fans, a 4020 for hotend cooling and NF Mellow hotend. It also greatly improves the bed…
While making this project it is highly recommended to desolder the PCB which has the side buttons on it to keep it from rattling inside of the mouse and to make the mouse lighter. This probably needs a quite well calibrated printer. The…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
Update: Revision 8 - (R8/R8-Solid model in printable files): Hex edge thickness increased to improve stability and printability Solid version included (easier to print than hex, slightly heavier) Slightly adjusted vent angles. Improved…
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. Falls die…
4020 Part Cooling fan for the K1, K1 Max. Parts - Stock Creality fan, and 4 M3 Bolts ( 2 M3x15 and 2 M3x5) I printed this with ASA for high temperature durability. You will need supports for the outside only. Also, you will need to remove…
[UPDATE Feb 15, 2022]: I made an update of this mod which you can find here https://www.prusaprinters.org/prints/134733-updated-satsana-50154020-fanbltouch-for-ender-3-en Thanks! [UPDATE Feb 12, 2021]: Uploaded the .step files for the…
It all snap fits into place but I strongly advise bolting it down if you're gonna move it around often or will put it somewhere it might fall. The top piece needs supports for the bottom of the screen hole The 4 holes on the side can be…
I modified the Rookery by Gulsifer to fit dual 4020 and 5015 blower fans instead of the original 3010 and 4010 verison. Theres mounting for a accelerometer on both, using M3 heatsets. (15mm holespacing) The 4020 version comes with some…
Made this mod for the blower as i didn't like the height of the original when first assembling my VC3. Been using and testing my original test model for several months now and has been working well so decided to finally share. This model…
This is a small remix of an existing model I found on onshape. All credits to the original designer of the fan shroud. I'm using sunon fans with the product id mf40201vx-1000u-a99. These are Sunon 40x40x20mm fans. They are not expensive…
Remixed version of a good fan duct that fits biqu h2 extruder. use 3x m3 brass inserts to mount fan
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
An easy way to connect the corner of two 4020 aluminum profiles
This is a remix of Schnabulation's remix of Ahmad Sundari's excellent hotend design, originally found here - https://grabcad.com/library/mbot3d-extruder-mk-2-mod-1 The above link has since expired, however you can find all the relevant…
Final, tested, and working. Option 1 Separates the fan shroud from the extruder shroud like the original fan. uses new fan shroud with magnet that connects to original extruder connection magnet. also uses tab to align with tab hole,…
I needed a mount for my Manta M8P for my Switchwire (Ender conversion). Due to size constraints, I originally designed the 4020 mount, then switched to 2020. There's one quirk which I'm unsure of: The camera/display ports sit under the…
I designed this mount so that I could hang a Dell AC511 soundbar from the VESA mount on the back of the Dell U4021QW ultrawide LCD monitor. This mount won't work with the Dell monitor stand. See my other models for a version of the mount…
Here is a cooling duct I designed as I couldn't find anything to suit my needs. My requirements were: Use 2 4020 or 4010 fans Direct drive with BMG Stock hotend No loss in build height Great access to heater block Voron inspired ish :)…
I wanted to make some changes to the original design. I need to mount mine to a 2020 Alu extrusion. So here are some highlights of the changes I made: Added the lip to the HEPA section and cut out the lid, making it stackable in any…
There are already very good alternatives available, but none of them seem to force the air flow on the fins of the BTT-made CB1 heatsink. This version tries to make sure that all the air exits only through the fin channels (give or take)…
Collection of set screws (ISO 4028 / DIN 916) including : M6x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite…
Please share your feedback or questions :) Don't forget to "like" and post your makes ! Thank you ! Enjoy it ! This is a remix from Scratch model (thanks for the original design !) It suits very well to my Ender 3 Pro. You will find 3…
One of my blades in my fan broke off and didn't have time to wait for a new one to arrive. because i needed to print something for a customer, so i had one 4020 fan in my spare parts and i made an adaptor that fit the original fan shroud…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Gyroid Filament brand: ICE Filaments Filament color: Red Filament material: PLA Notes: "Support overhang angle" set to 88 degree…
Die Einrichtung für den "4068" passt auch in den 4024 Speisewagen. Nur ein Teil der Küche aus "Interior for the Märklin 4068 SBB- Restaurant car" von ccs66 habe ich remixed. Dazu habe ich von "4068-2-1" aus dem Original ein Stück an…
Collection of set screws (ISO 4028 / DIN 916) including : M4x 3, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…
This is a set of models to add multiple 4020 fans and supporting brackets to your Ender 3 S1. They are designed to use together or just some of them. The parts cooling shroud has z-height adjustment. Ribbon bracket has strain relief and…
Collection of set screws (ISO 4028 / DIN 916) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Due to the lack of mounting points in newer printers, I made a version that attaches to the motor without any complications. Needed parts: 4x - 3Mx25 screw for 4020 fan (3Mx15 for 4010 i guess) 4x 3M heatset
I apologize for my English, as I translated my language through a translator. I decided to install Easythreed k10 on Nema stepper motors and at the same time increase the print area a little. These parts are not ideal, but still with…
Same rear is used in both variants. First folder: 9.5mm added to fit a volcano v6 hotend. Second folder: 9.5mm added to fit a volcano v6 hotend and mount a 4020 heatsink fan.
Collection of set screws (ISO 4028 / DIN 916) including : M5x 4, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
Remade the fan mount using the original afterburner model, blender and mmmta's design as inspiration. Shouldn't have any errors, cleaner geometry. Original from mmmta's: https://www.thingiverse.com/thing:4722263 Category: 3D Printer Parts
This is a simple fan adapter, that allows you to mount the blower 5015 in place of the standard fan 4010 4020 etc, without significantly increasing the thickness of the entire object. For example, as an airflow in front of an extruder At…
Simple dual 4020 blower fan cooling duct for BIQU H2. Simple and low profile, it is height adjustable via the 2 mounting slots that connect directly to the H2. print gets fairly thin by the duct so .4mm nozzle or smaller would be best,…
Now supports stock 4010 Blower and 4020 Blower Fans This is a mount and cooling fan for the Mellow NF Sunrise HF 12V Volcano Hotend Direct Drive Extruder for Creality CR-10 or equivalent printer. Note, only the mount and fan duct was…
4020 blower fan ducts design to work with The Mint Mount. Requires M3 screws for a secure mount. 25-04-2021 - Updated design to provide more clearance. Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: Yes Resolution: 0.2…
It is possible! In attempting to re-grease a very noisy creality printer fan, I broke the pin support off. This is a replacement fan. Modelled off of a very quiet fan blade design. Designed in FreeCad
Summary Simple but sturdy tray to click into the standard 4040 V slot aluminum profile rails, suitable for many types of printers. The tray fits tightly and does not wobble - but can be moved with light pressure. Compatibility Fits all…
Sovol SV01 Pro / SV05 factory 4020 fan duct (received directly from Sovol).
So I was on the hunt for a long time for a Fan Duct for my Ender 3 Pro that would work with a dual 4020 fans setup, in order to install some silent fans. I did not find anything that I would like and would look nice. I then designed this…
This mount allows you to mount a 15mm(OD)x10mm(ID) cable grommet to a 4020/4040 extrusion. I used it together with my umbilical cable mount for the Voron Stealthburner…
My Mom bought a new VW Passat B8 and we still had a bit of Diesel at home. The only problem with it was that the Diesel was in an gas can. The funnel we use for all the other cars works just fine. But on the new one it doesn't. Newer Cars…
Some stats about the irl Cessna 402 Crew: Two pilots Capacity: Six passengers Length: 36 ft 4+1⁄2 in (11.09 m) Wingspan: 44 ft 1+1⁄2 in (13.45 m) Height: 11 ft 5+1⁄2 in (3.49 m) Wing area: 225.8 sq ft (20.98 m2) Airfoil : NACA 23018…
Easy and fast fix to get a Bigger and silent Cooler into your system. BLTouch and other mods should still work as before because its only a bit deeper to the front.
This model is compatible with the lego system.
04-29-2023 UPDATE: After putting my printer in an enclosure, I noticed the cooling I was able to achieve took a hit, possibly due to the old design pulling in air directly from the print bed. This update moved the fan back to the side of…
This is a modified duct from a file i had from when the first Hemera came out….I added some height and length to fit the Revo. I use ac glue to bond it to my fan, it comes off without wrecking part if you want to change it..at least it…
A mounting shroud for a 4020 blower fan onto a Sovol SV06 printer for parts cooling. The blower fan is mounted via pressfit into the shroud and clears the gantry on both sides. It prints “face down” as one part, supports are required for…
I had problems with the ADXL 345 mount for the fan. It was not an issue with the fan that I am using, which is a 4020 axial fan. but with the mount itself. The board wont stand straight on it, so a lot of pressure was being push in the…
This is a remix of @0x53 flat mount for 4010 fan that works with 4020 aswell that is sighly longer to accomodate the shallower depth of the hotend heatsink of the Ender 3 V3 SE ceramic hot end upgrade kit. Needed parts: 4020 / 4010 Fan…
I remade the 4010_to_5015 adapter to a 4020 to 5015 adapter. I'm using a SUNON MB40202V2-0000-A99 Fan (Not Pictured), which is quiter then a stock 4010 fan and most blowers, but still gives great cooling. I had to slightly modify the…
Revisions v3 : Has a more directed airflow and mounting holes for a BTT AXDL345 module. Allover better design. v2 : More robust mount system. Features While there are multiple pretty good cooling mods out there I missed one with all the…
Collection of set screws (ISO 4028 / DIN 916) including : M10x 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Collection of set screws (ISO 4028 / DIN 916) including : M12x 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
This mount allows you to mount a Dell AC511 soundbar to the stand that comes with the Dell 4021QW ultrawide monitor. The mount consists of two parts. The first part snaps into the cord hole in the monitor stand, and the soundbar snaps to…
I wanted a 4020 adapter to use my Noctua fans with my Biqu H2 V2S Revo, but I also wanted it to look like it matched the aesthetics of the rest of the M.A.D. system. I also designed it to try and eliminate any airflow from getting down to…
Later Edit: 11.april.2024 i have added the step file. Please post your make and share your experience with this. https://www.paypal.me/NDRNADIR Later Edit : I have added the Magnets holder with a cutout for the X endstop cable Introducing…
CPAP adapters for fan 4028 4020 4010
…Please be sure to hit like & post a make, I'd love to see your prints! HERE'S MY HOW TO GUIDE TO GET IT TO WORK WITH KLIPPER: https://github.com/3DPrintDemon/BTT-Relay-v1.2-Moonraker_INSTANT_Power-On-Button Simple quick mount for your…
Deutsch: Ein überarbeiteter Lüfterkanal, um die Materialkühlung zu verbessern. Durch die Anpassung schleift der Fan Duct nicht auf dem Druckbett. Druckeinstellungen: Filament: PETG (PLA verformt sich über die Zeit) Schichthöhe: 0,2mm…
Check my other IKEA designs: NEW Ikea Metod Leg Extender (705.560.67) IKEA Metod Back 10mm Spacer Replacement (10036383 or 10039201) Why If your robot vacuum cleaner does not clean under the Ikea Metod cabinets (standard 8 cm is at least…
For a ARRMA 40mmØ motor (62mm long) fan mount used in some remote controlled cars. dual 4010 and dual 4020 mount Print should not need any print support. PETG or better for the clip part, since I assume it's on a hot motor. Clip itself is…
This model is compatible with the lego system.
Guide for mounting an MGN12 Linear rail in the centre of a 4020 4040 extrusion. Print top down, 0.2 layer height, no support. no build plate adhesion
Ender 3 4010/4020/5015 Fan Mount and Duct Main Cooling Fan Mount This part is based on the stock fan cover, but allows the use of a 4020 axial fan on Ender 3 and maybe other Creality printers for heatsink cooling. If using a 4020 fan it…
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
This is a remix of a Remix, original here https://www.thingiverse.com/thing:5927471 Since I couldn't find a 5015 blower in my zone I had to modify the shroud to use a 4020 one. It works like a charm! No more problems with cooling! First I…
Not mantained anymore Switch to this model instead, which I made in CAD myself and it is easier to mantain and create newer versions (and you can also do it yourself because the step files are provided)…
Collection of set screws (ISO 4028 / DIN 916) including : M16x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Collection of set screws (ISO 4028 / DIN 916) including : M20x 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…
A cooling fan duct to replace the stock 4010 fan with a 4020 fan. It reuses the stock fan hardware to mount to the Ender 3 hotend. The fan will need 2 m3 nuts and 2 m3*20 bolts. Hardware needed 2x m3 nut 2x m3*20 bolt
I noticed my Ender 3 had a slight wobble when sitting on an even tabletop and I couldn't seem to adjust it. Printing these legs fixed my issues. Plus, elevating the printer 2" made it much easier to move around when needed. I also added…
german version below This is an interior design which kind of matches the outside description of the coach: A4 ümg which was to my knowledge a compartment coach. As I didn't find nice or affordable interiors I designed that one my self.…
I really liked the air flow of the Hero Me system. I started with the file "4010_Single_Radial_Fan_Dual_Ducts.stl" and removed the supports and added my own. Print as you see in the pictures. Supports on build plate only. Infill to taste.…
Remix of Petsfang Bullseye. Needed the smaller 4020 to fit underneath the generic direct drive. this is a remix of Petsfang Bullseye. I already had the mount so i just remixed the duct for the new fan. Also added heavier supports from the…
