153 modeli
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
NACA Airfoil 2412. I use this for a test print for new materials or different settings. Uses surprisingly little filament for its size. Print instructions Suggested settings: one perimeter zero top and bottom layers gyroid infill 15%
DIN Rail Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor), Wago 221-415 (5-conductor) and Wago 221-420 (10-conductor) as well as mixed Connector mounts. Includes Models where the wago opens to the left (Models ends with L)…
Wago mounts I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants. I also chaged the model cosmetically a bit. Wago Splitter I've also…
This model is compatible with the lego system.
Small surface mount box, for hiding cables and wago connectors - just shorter Please use low-current sensor and signal wires only . It is not suitable for mains wiring due to potential safety risks and regulatory non-compliance.…
I split WAGO holder from VORON Trident assembly in CAD, for segments to be added or removed as desired. I needed mount for 2x and 5x WAGO 221-412. Fusion 360 file is available to edit according to your needs. Move segments 15.5 mm to…
After the second world war Alsthom (still with the letter “H” in the name) build 130 diesel electric locomotives for the Nederlandse Spoorwegen (Dutch state railways). They were based on a standard for locomotives in France and the French…
Wall mount for DeWalt DCG412 Angle Grinder
This model is compatible with the lego system.
💡 If you like my design, don’t forget to leave a like ❤ It really helps me keep creating more models. WAGO Dispenser is a practical dispenser designed for quick and organized dispensing of WAGO connectors. It provides easy access to the…
This is a NACA 4412 based rib to build your own wing.
2 different layouts to host Wago 221-412. Mount (2 x 2) Keep your electrical connections neat and tidy with the Simple Wago 221 Mount 2 x 2. It's quick, easy, and efficient! #organizedwiring #simplewago #electricalhacks. Do you like my…
My attempt at the Tom Stanton VTOL wing. With two wing spars (16mm and 8mm) spaced 70mm from each other. Level with another at 0 deg of attack. Wing chord ~180mm Wing height ~23mm Ribs spaced 30mm apart.
This wing is fully functional, it was made out with the NACA-2412 airfoil, the same used in the cessna 172, the flap, extends and retracts as in the real life passenger airplanes. It can be done fully 3d printed, but the weight would be…
While building My Voron 2.4 I needed a mount to hold 4 221-413 Wagos for my bed heater. Really I only needed a 3x412+1x413, but I wasn't going to buy a box of 412 Wagos just for 3 of them. I went ahead and made that part as well in 2…
modded the stl of the 413 in tinkercad, had to drop one of the screw holes: https://www.tinkercad.com/things/epwiqFcMPK3-wago-221-mount-221-412
A wall mount radar presence sensor with a LD2412 that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). Instructions: bend the pins of…
Because there is no Killflash on the Market for the MB4412D Sniper Rifle Scope, i designed a killflash on my own. This killflash is maybe not as good as it could be so you are invited to improve it! This basic sample was good enough for…
Voron V0.1 3x Wago 221-412 mount for the bed heater Based on the Voron V2 / 2020 mounts by Boingomw which you can find at https://github.com/boingomw/VoronUsers/tree/master/printer_mods/Boingomw/Wago_mount Use 2x M3x8 SHCS to secure them.…
A compact snap-on holder designed to mount three WAGO 221-412 connectors on a standard 35 mm DIN rail. Ideal for clean, tool-free installations in control cabinets, automation projects, or DIY setups. This version fits only the 2-port…
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Sensor housing for the esp32 super mini c3. I printed on PLA and the lid is a snap in design (though feel free to modify to use screw posts). The ESP sits very snuggly in the case - so you'll want good tollerances.
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Connects 3 x 2 way Wago connectors. The Wago connectors are held in place with a small detent. One lever per connector is blocked to prevent accidental disconnection. I made this to enable a quick disconnection of my power supply and…
Wago 221-412, 221-413, 221-415 Din Rail Mount . Can also mounted by using a M5 Countersink Screw on a Flat Surface. printed in PETG Perimeter: 3 Infiltration: 15% Layerheight: 0,2mm If you like it, give me a like. you can modify the Parts…
Wanted a more elegant solution to holding podium mics in a "Presidential Mic" setup than gaff tape. This little clip was born. Optimally it would be printed in black. Push the flexible part of the neck into the opening on either side then…
This model is compatible with the lego system.
A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…
A bracket for the Parkside HG06412 LED flashlight with hooks for use in wall-mounted sales in LIDL supermarkets. Perhaps it can be used in products from other manufacturers such as Ikea, but I do not know. The separation between hooks is…
Improved Version: The cylindrical roller bearings perform better than deep groove ball bearings when it comes to force absorption (see picture 2). They are also easier to print and can be customized for various applications. With the…
This model is compatible with the lego system.
The cutouts are for wire pass through for a upcoming project (as well as a locating hole for fixing the AOA) Chord: 180mm Spar: Center 58mm from the front Length: 250mm Thickness: 23.1mm
Needed to create a baffle for the widely available and inexpensive Dell branded Mellanox ConnectX-4 LX cards that are slightly different in layout than other half height versions I've seen. The card is very secure once the baffle is…
Update june 2024: IT still WORKS, I had it in my car for over 16 months and ABS survive -30C to +40C (outside temps). Sounds amazing!!! I love this mod so far and I don't want to get rid of the car because of it. 10 inch Subwoofer adapter…
Astra J headlight cleaning system nozzle holder with the part numbers 13258411 and 13258412
Gridfinity compliant, low-profile tray/holder for the IWISS IWS-2820M and the IWS-2412M open barrel terminal crimping tool. I did not completely design it from scratch. I used schenklooza 's excellent Gridfinity Parametric Blank bin as a…
UPDATE: 221-412 and 221-415 added. Keep Wago's organized and clean even when stored in your pocket tool bag or toolbox. Holds 10. Slides open from either end. Hex grip texture on top. I may make larger/different sizes in the future.…
This model is remix of Kirigami LDO Breakout Mount from LDO Motion. I use it together with original part to connect thermal fuse with wago terminals and also when using ac bed heater to distribute ground wire to build plate and kirigami…
This tensile specimen can be printing using paste extrusion 3D printer for Rubber standard materials. Very useful in analyzing mechanical properties of 3D printed rubber specimens.
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Come support these models over on Patreon Buy my time, Not my models. Easy to print Moskvitch 412, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. Included is a bare rim and…
TLDR; UNPLUG YOUR PRINTER BEFORE DOING ANYTHING ON MAINS VOLTAGE. OTHERWISE THERE IS A 50% CHANCE YOU WILL GET SHOCKED. Even if your printer is switched off, it only may have switched neutral which means you still have a hot phase even if…
Holder for the X-axis cable wrapping; The only one moving one that in the kit stays loose. Recommend to print in ABS and use 2 layer raft
Bau und Programmieranleitung gibt es auf Youtube #### Neu #### Upgrade Dateien aus dem Video
Quick printing mount to attach Wago 221-413 and 221-412 per the configuration shown in the screenshot for the Zero G Mercury One.1 Hydra bed mod. Print in ABS/ ASA at 0.2mm or smaller, no supports needed. Mount should fit between the two…
lego 2877 71752 98283 15533 30136 30137 20310 2412
This model is compatible with the lego system.
I liked the methylene67 model for Wago and JST connectors, but I needed it to have 4 Wago connectors for Ground, Neutral, Live to Fuse, and Fuse to Bed. I used Voron settings to print it in ABS.
Printed in Eryone PETG Gray, print with supports 50% infill. fits 100%.
Mount for 3 Wago 221-412 Optional Holes for M5 countersunk screwcountersunk screw
This model is compatible with the lego system.
IF YOU LIKE WHAT I AM DOING, THEN PLEASE GIVE ME A THUMBS UP! And if you think this part is worth it, maybe you can give me some support with a tip? Im working on the publish for the sniper rifles which is the magazine from the MB44…
I wanted to use Wago connectors to join the two fans with one cable for easier cable management and no soldering, so I remixed the model.
This is a replica of the Losi Front Kickplate (part number LOSA4122), designed for vintage Losi RC vehicles since replacement parts for these models are becoming increasingly scarce and expensive. Compatible with: Losi XXX-SCB Losi…
This is my version of WAGO oragnizer boxes inspired by the 221 series, its supportless and easy to print. You only need printed parts and Superglue gel or liquid. You can choose from different versions, see the attached .stl files.…
Some times you just need to slap a wago on a print to connect wires. Grab the stl, add it to your slicer and WAGO! I created a mount designed for integrating with other designs for the 221 Wago Wago 221-413 / 221-412 / 221-415 Simply…
Motivation Cable outlets for lamps on the ceiling sometimes tend to be “messy”. Connecting a lamp above your head is somewhat difficult. Quite often connectors or clamps are missing or soiled with paint. Heavy lamps have to be suspended…
This bushing mounts on the radiator and then sits on the radiator mount. It's used on a lot of 90's BMW's OEM part number: 17111178412 Print in TPU! 3 Walls, 30% gyroid infill
Wago 221-412 mount (including ground)
I designed this model years ago when I worked for PSAV/Encore (If you know, you know) and now re-vamped it with no logo for the masses to use. Check out the original model on Thingiverse: https://www.thingiverse.com/thing:3293672 Simply…
A Modular Screw Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor) and Wago 221-415 (5-conductor). Includes vertical and horizontal mounting options. The Modules can be connected freely, every modle is compatable with every…
Screwmount for WAGO 221-412 (2x2) for 1515 extrusions. Used in small printers like Voron V0 or PfA Micron+
This is a remix of the closed shelf for the 10 inch rack project to fit a Mini PC J4125 4 eth ports. https://www.aliexpress.com/item/1005004337724378.html Printed with PETG. Print Settings Printer Brand: Creality Printer: K1 Supports: Yes…
Simple a DIN rail mount for the PCT-41x (412, 413, 414, 415) WAGO Style Lever-Nut from AliExpress. I have found these to be a good lever-nut. Thanks to yahbluez for the original design and concept
This part is originally made of plastic, and has a tendency to break. Replacement parts are only available as an assembly which is very expensive, relatively speaking. Other models available do not fit nicely, or are weak, so I made this…
This model is compatible with the lego system.
Wago 221-412 Mounting Bracket A compact remix of an already excellent Wago mounting bracket design. The original model has one of the smallest and cleanest footprints I’ve found, so I wanted to keep that simplicity while adding support…
Most fixed for the ridgid table saws are for the newer ones, I have had mine for at least 25 years and have always hated the fence. I tried some of the fixes found on thingavese, and they did not work. I have included a longer and shorter…
Overview Lightweight and durable dipole link insulator designed specifically for Wago 221-412 connectors. Ideal for portable amateur radio setups (SOTA, POTA, field days) to quickly connect or disconnect wire segments and change bands on…
This is a simple zipper pull cover. It goes over top of a WAGO 221-412 electrical connector. This zipper pull serves two functions. 1: It pulls your zipper. if you ever need a zipper pull then it will be great for that. 2: You have an…
I have created it with TPU and 0.6mm nozzle. The 0.4mm nozzle may be a better choice. I have also uploaded gcodes for 0.6mm/0.4mm/TPU/PLA for MK3S+. I you are interested in other combinations let me know. You may also create your own…
Rear Body Mounts - Losi XXX 1/10 2wd R/C Racing Buggy I couldn't find these anywhere so I designed them in FreeCad. I printed them in PLA and TPU. They both came out nice. In TPU they are pretty much indestructible. I used a Brim, 0.12…
Print at home Dust baffle / block for the dust collection area on Laguna 14|12 and 14|BX band saws. I cut mine in half when the blade snapped, so 3d printing to the rescue!
Dies ist eine ersatz (stabilisirtere) Motorhaubenhalterung für einen Fendt Varion 412 Bj. 2004
A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…
Wago 2040 extrusion mount 221-412 Wago M6 hole 8 Wago's Snap in place Red is printed with Creality PETG on Ender 3 V3 KE @100% Black is printed with eSun ASA on Creality K1C @101%
Cut For Bambu - 10" Subwoofer Adapter Holder V2 for Audi A3 S3 8V 8V5 replaces 8V0035412
I liked the box but wanted to use a different connector. So I remixed for 2 2EDG 5.08 KF2EDG 2Way Plug Terminal Blocks Connectors. This gives me 2 24-volt outputs. I used 2EDG 5.08 sockets
This is a custom-designed holder for the following Eheim models: Eheim 4004512 Eheim 4005510 Eheim 4004412 Eheim 4005410 The holders are available in two different sizes, 20mm and 30mm. You can choose between a single holder or a dual…
Camera mounting plaftorm for DELL U24212 monitor. This is 1U width (15 mm) version. Snaps on top of the monitor. It is quite strong not easy to detach. 1/4-20 camera mount screw is needed to attach camera to this mount. Base contains two…
change the JST connector fitting for a https://grabcad.com/library/2-pin-microjst-1-25mm-connector-1 from UnspokedTube0 “ Wago 4x 221-412 and JST bed mount for 2020”
For Rosewill RSV-L4412U 4U server chassis, will support up to 360mm AIO's and fans in push pull. Pressure fit, however if you wish it has enough thickness and height to be screwed in with heat sets on both sides with the stock holes in…
Mounting plaftorm base for DELL U24212 monitor. This is 2U width (30 mm) version. Snaps on top of the monitor. It is quite strong not easy to detach. Base contains six holes for 3mm brass inserts. Holes are spaced 10 mm. This allows…
Use the Skadis T-Nuts and some M2 screws for mounting You also need 1x 6x3 magnets and some glue
Camera mounting plaftorm for DELL U24212 monitor. This is 2U width (30 mm) version. Snaps on top of the monitor. It is quite strong not easy to detach. 1/4-20 camera mount screw is needed to attach camera to this mount. Base contains six…
Eclosure for DC2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. For XT60H.
Simple, friction fit adaptor for Ridgid R4123 miter saw to Festool 27/32 suction hose adaptor. Printed with no supports.
https://cad.onshape.com/documents/35b39d8c8107c2b331d2780e/w/256abfa0e0ee655659f38151/e/91e73e25f4508157b69f15c5?renderMode=0&uiState=6a8b2185bd0b2e6c57989a03
So my Mont Blanc roof rack has this 4 clamps that holds my roof rails ( hyundai tuscon). Feet for those clamps can easily get lots. I made a spare, because I lost one. I measured original and did best I could. It fits tight and holds…
Naca 2412 morphed 11 deg AOA
Механизм состоит из двух частей, чтоб упростить печать: Втулка вращения на которой можно зафиксировать шестерню Внутренний фиксатор венчика Шестерня Шестерня надевается на втулку до специального упора. Втулку можно из ABS, PetG и более…
IWS-2820/IWS-2412 holder for HoneycombStorageWall
This stand perfectly fits for Dell Monitors U2412M, U2312HM or similar (with the same stand). It increases the monitor's height by about 3 cm and is shaped similarly to the base that makes it look like one piece. In the front there is a…
Simply merged 2 of gltovar 's model side-by-side to create a double-mount for keeping the WAGO splices for 2-wire cables together. One version contains a side-by-side version, meant for the pairs coming in and going out from the same…
Camera mounting plaftorm for DELL U24212 monitor. This is 2U width (30 mm) version. It requires 1/4-20 brass inset. Snaps on top of the monitor. It is quite strong not easy to detach. As this mount contains 1/4-20 brass inset, camera…
In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a U2412Mb monitor and a 3D printed bracket that…
