Liczymy pasujące modele…
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
4-11-22 updated model with stl parts
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
It works on OEM and S15 mags. I take no liability as this was just a fun project and should be a stepping stone for anyone that is considering a magwell.
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…
Model for use in checking fit, as accurate as it could be using only a mm transparent flat ruler STEP, STL and IPT included Wires extruded 8mm to do fit without bending but are flexible enough to be maybe 2mm clearance on the real model…
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
This is my model of the awesome SpaceX rocket Super Heavy Starship. The model is in 1/48 scale so it is almost 2,5 meters tall. The assembly is rather simple as I had marked all the parts with individual numbers so that you know how to…
Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Small and simple actuator using a 28BYJ-48 stepper motor. Re-used an existing helical gear and rack design and created a new base and mounting boss + pin. Needed a quick and dirty solution so this actuator is created using basic shapes in…
Tested and printed without issues using Cura slicer. Hello everyone, I've prepared for you this model of the Czechoslovak heavy-duty truck Tatra T-148 S1 in 1/18 scale with working steering, suspension, dump bed, doors and bonnet. Along…
I designed this rack to fish 48 holo nail polishes. It might fit other brands too but it wasn't tested. It is designed for bottles 28mm X 28mm. It is very sturdy and was designed to be "cat proof" as there has been an incident involving a…
Originally made for cheap tiny lathes like those sold on Amazon ( like so ). Remixed from mdkendall's excellent design that provided the basis for this smaller version. Thanks mdkendall! This version mini-fies the design to: work within…
This is a 28BYJ-48 stepper motor mount. It's the stepper motor that comes with the Elegoo Arduino starter kit. Will allow you to attach the motor into this 3D printed part and then you can attach it to a flat surface. Print Settings…
Somehow I keep loosing these adapters, so here is a 3D printable set of anything I could think off. Obviously print them in a colour that doesn't allow light to come through, black is a good choice. PETG seems a good choice, it is a…
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -3d Printable Files -Bill of Materials -CAD Files -DXF Files -Renderings…
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
Low Poly edition of the USA Lower 48 States In this model all elevations are square root scaled to reduce high elevation outliers and enhance low elevation detail. Find the full resolution USA lower 48 states combined here and print…
29T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional torque/acceleration over stock 32T pinion, at the expense of some top speed. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with…
This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…
***IMPORTED FROM THINGVERSE*** Details Modified the Parametric Rugged Box by TheSameNameTwice to hold 48 AA batteries. They have an AA holder as well but it holds fewer batteries and isn't staggered. I chose 48 because that's the size of…
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
Added a Fillet on the face to ease the handle usage. I also simplified some of the surfaces created a Fusion 360 file and 3mf and strengthened the body of the clips. I use the Add Part > Text command with the “cut” Operation in…
See https://www.amazon.com/gp/product/B087B5NWY4/ref=ppx_yo_dt_b_search_asin_image
This model is compatible with the lego system.
This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…
This portable drill press is designed for Makita DHP480 18V Cordless Drill . The drill is attached to the drill press sled from the conical torque setting ring, as shown in pictures. The torque setting ring in this particular drill model…
Case for HAMTYSAN 7 Inch Portable Monitor External Display 800x480 for: https://www.amazon.com/dp/B0B8S9DYQC Legs used also as a harness for Raspberry Pi 4 Model B case, from here: https://www.amazon.com/gp/product/B07D3S4KBK
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- 6ts manual operated crane, as it was used on larger…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Just a side kick of my normal designs… may be someone has use of it. 😊 If you need a girl with phone in sitting pose - there is already one here (called "WrongTimeGirl"): https://www.printables.com/de/model/316751-passengers-for-steam-bus…
A simple mount for a 28BYJ-48 stepper motor and driver board to keep things tidy. NOTE: Just got a batch of 28BYJ-48s. Motor mount fits well, but the driver boards were a tiny bit large for my control case, so you may have to scale yours…
Case for "CYD 3.5" capacitive touch. (ESP32-3248S035C) Display and case on one level. For example: https://de.aliexpress.com/item/1005005928255980.html?spm=a2g0o.order_list.order_list_main.11.4a535c5fYamG2U&gatewayAdapt=glo2deu Fits the…
This organizer holds 4 sets of 12 hex bits. 3 rows are .875" deep for extended length bits, and 1 row is .375" deep for shorter bits. Two model versions are available, with and without labels. I chose to fill them with the following bit…
Meant as a side kick only my “girls with phones”- design became unexpectedly popular. There seems to be a great demand for figures of the better half of the mankind. 😉 As I had made them anyway, here are some more girls and (not to…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
M3 nuts and screws Bearing 608
Endkappen für VELUX 948474 Insektenschutz Rollo ZIL passend für Insektenschutzrollo ab Januar 2003 (AN 01) Ein Set im Original kostet ~25€ + ~10€ Seil am besten mit dem Runden Teil nach oben drucken + überall Support Mit guten PLA sollte…
Involute tooth form was generated with Gearotic Motion software Print instructions 3 Perimeters Supports 20% Infill
Nowadays we imagine rail cranes in construction work only or in case of rail incident, but in earlier days of railways such cranes were quite commonly used for normal cargo handling. Yard cranes able to load/unload road rail containers,…
This model is compatible with the lego system.
Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…
This model is compatible with the lego system.
Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…
Some time ago I published my Thames river barge: https://www.printables.com/model/395615-oit-thames-river-barge-1-148 But what is a barge without a tugboat isn’t it? Fortunately, in the same book we found plans of the barge also lines and…
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
Hello! So this is a combination of two STLs I found online. I combined the clips from the Sentro as well as the shape of the Addi tensioner. Please Note: This is not for the Addi Express or Addi King Size Machines, if you need a tensioner…
A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…
M48 Cyclone Spiral Boot Knife Knife inspired by the M48 Cyclone, featuring two interchangeable blades with a three-cut spiral design. The sheath can be used as an additional handle, resulting in two Cyclone knives.
This remix allows you to store up to 48 Micro SD cards plus one standard SD card or adapter. I needed many more Micro SD slots, so I remixed this from the version that held only 16, so the 3mf file is kind of messy, with a lot of separate…
This enclosure is for a ESP32 D1 mini with RS485 modul and fits a DIN rail (one module). It consists of three parts: body, lid and a clip to fix it to the rail (like most devices). Two PCB terminals (2 and three pins) are used to connect…
This model is compatible with the lego system.
The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…
Please click if you appreciate my work :) Experience the speed and elegance of Italian automotive design with this detailed Ferrari 488 replica, crafted specifically for 3D printing! This high-quality model combines realistic exterior…
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
These are for the 48-22-8435 Small Parts Organizer Models, solid and separated, depending how large your build volume is: P-Mag inserts for 10 magazines P-Mag insert for (4) 10 & (8) 30 round mixed I can do this differently on request, I…
This model is compatible with the lego system.
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- This is an add-on to my OIT-model of Thornycroft…
While researching the origins of intermodal transport, I found pictures of British road-rail-containers being unloaded from barges to wagons at a dock near London in the 1930's. Then I found another fascinating image on the web, showing a…
Update 2022-04-13: Alaska is now also available here: https://www.thingiverse.com/thing:5346700 Update 2022-03-14: Hawaii is now also available here: https://www.thingiverse.com/thing:5317621 This is a 47 tile topographic puzzle of the…
Only top is rounded, to make printing easier Printing notes: Prints in-place, no supports This models assumes a fairly well calibrated printer, but you probably don't have one: Try to print as-is at the start If axles don't fit properly…
As I needed to mount my Meanwell LRS-150-48 PSU to my VCore3 printer, I designed this mount adapter. It doesn'r require supports of printed as seen in slicer pics. You need 3x M3 6mm BHCS bolts and one M3 heat-insert (best with 4.6mm OD…
This model is compatible with the lego system.
The second version of the stand for painting models with hinged holders and larger locking wheels. M3 nuts and screws Bearing 608
Case, designed for NX4832F035, but can fit for all similar models. Print parameters Supports: No supports necessary, place it facing down if you have enough cooling
Holder for a SN-48B crimper tool that works with the honeycomb storage wall
yoRadio box. More information https://github.com/VaraiTamas/yoRadio.git
Here you can find cargo for loading trucks. Bags, barrals, pipes… All models are sized for British n-scale (1:148). Conversion values: Continental N-scale, 1:160 -> 92.5% TT-gauge, 1:120 -> 123% HO/H0-gauge, 1:87 -> 170% OO/00-gauge, 1:76…
A case for the WT32-ETH01 with a RS485 module and USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: TTL to RS485 Converter Module, e.g. https://www.aliexpress.com/item/32853794532.html 5 V…
Static model for use on 1/10 scale RC vehicles. Is hollow so you could put objects inside if you wanted but it does not hinge open. Prints in 3 pieces (open/flat side down) to be glued together with superglue.
The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut
My brother bought this tape machine used and it had a broken Gear C which seams to be a common problem, since there are people selling replacements on ebay. I tried my best to model a replica of the gear and we managed to fix the tape…
Small case for the LilyGO T-CAN485 ESP32 board. Top held on by press-fit, bottom can be mounted to something using double-sided tape (don't print on a textured bed if you plan on doing that). Be aware that for CAN and RS485 the DC-DC…
Mounting plate with 10 Lego technic compatible peg holes that clips round a standard, cheap 28BYJ-48 unipolar stepper motor. The stepper motor drive axle is perfectly aligned so as to mesh with other technic gears. Printed on an TronXY…
ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- The Y-type lorry was one of the British trucks…
This model is compatible with the lego system.
A simple but beautiful wall mount for LEGO set Ferrari 488 GTE: https://www.lego.com/en-dk/product/ferrari-488-gte-af-corse-51-42125 Printed in PETG with 0.6 Nozzle 2 perimeters 20% infill gyroid. Hole though is 6mm while the counterbore…
Hi Steve, Sorry it been sitting on the back burner for some time, but here it is. Hopefully there is some thing in here that will help with your project. Cheers Jace Photo is for reference only! Category: 3D Printing
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
13S4P 21700 - 48V 20ah Battery Tray - compatible with 2P Strips
This is my model of the Falcon Heavy rocket. The model is a kit but because it is in 1/48 scale, I really recommend to use also some glue - it is big and heavy.
(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…
Well there is not much to say, its a holder for the 28BYJ-48 stepper motor. It uses two M4x18 bolts and two 7x3.2mm nuts for the motor mount. To mount it on a surface you just need two screws. It has great tolerations so even a non…
![Twilight Imperium Wormhole Tokens [thing:4866300 remix]](https://media.printables.com/media/prints/317986/images/2777025_a621fef1-5cb2-4840-9242-7b7df00b92aa/pxl_20221120_190403314.jpg)
