Liczymy pasujące modele…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
This enclosure is for a ESP32 D1 mini with RS485 modul and fits a DIN rail (one module). It consists of three parts: body, lid and a clip to fix it to the rail (like most devices). Two PCB terminals (2 and three pins) are used to connect…
A case for the WT32-ETH01 with a RS485 module and USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: TTL to RS485 Converter Module, e.g. https://www.aliexpress.com/item/32853794532.html 5 V…
The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut
Small case for the LilyGO T-CAN485 ESP32 board. Top held on by press-fit, bottom can be mounted to something using double-sided tape (don't print on a textured bed if you plan on doing that). Be aware that for CAN and RS485 the DC-DC…
This t-track uses a m6 bolt, I'll add more sizes if there are interest. The bar is slightly beveled to make insertion easier. (The featherboard can be found here: https://www.thingiverse.com/thing:4228110)
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
This model is compatible with the lego system.
This design is made for the DEWALT DWE 7485 TABLESAW This clip allows you to hold and remove the tablesaw when it's needed. No need to unscrew it, just grab it and move. To get a stronger print, I recommend you to print it with the " U "…
This model is compatible with the lego system.
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
This model is compatible with the lego system.
I needed one of these plastic self locking bolt and sleeve assemblies for an IKEA Kura bed I bought thirdhand, that was missing some. So I took out one good one, measured and modeled up a similar design. Printed with 0.4mm nozzle in PETG…
Printed with PETG, nozzle 0.4 mm, 0.2 layer without support
Connect your DWE7485 to your dust collection system
Designed around the 2.5" ultraflexible hose on Amazon and has an adapter to take advantage of the blade guard in order to collect dust from both under the blade and over the blade. Hose https://www.amazon.com/gp/product/B01M35BE8D/ Hose…
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
These are simple brackets that fit over the feet on the DeWalt DWE7485 / DCS7485. They allow you to easily & securely mount the saw in place as I found the original mounting holes to be very awkward as they are at an angle. Are a ver good…
Model optimized with increased spacing to simplify accessibility. Optimized for my DDF485, but should fit all other Makita drills with same handle as well. Used TJDesigns standard base hook mini (modified by me) for assembly to Skadis.…
I recently built a worktable with a space for my dewalt 7485 tablesaw in one end. As the table is on wheels, the saw sometimes get a little out of allignment when moving the table around. Also, the wood got slightly out of allignment…
This model is compatible with the lego system.
Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac
Miter track slider for Dewalt table saw DWE7485, designed for use with this featherboard https://www.printables.com/model/172907-featherboard-for-woodworking-no-supports-needed-wi , but can be used for anything. Designed for use with M6…
Small casing for Wemos D1 mini v3 (ESP8266) with an RS485 to TTL Module. Used for Communication between Smartmeter and MQTT Broker via Tasmota. Wemos is mounted with 2 pcs 2x10mm Self Taping screws, RS485 to TTL module and the lid is only…
Use this prints if you placed your Table Saw in place and you don't want to move it again. I used screw for wood to place it. I used two peaces of them but one is enough. There are 2 files: Low is for lower tubolar of table saw. Here I…
I created this to allow for print on my smaller printer (Bambu P1S) and to then assemble with screws. Added a solid bar across the middle with 2.5mm holes for m3 screws to thread the pieces together or a narrower bar to use an m2 screw…
This model is compatible with the lego system.
An adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Both ends have a slight taper.
Print in ASA for durability and UV resistance. 100% infill for best mechanical strength.
This model is compatible with the lego system.
Protect your LilyGo T-CAN485 with this simple enclosure. Printed fast with a .6 nozzle, so the example is a little rough around the edges. Fusion 360 file included for modifying to your specific needs.
This model is compatible with the lego system.
Simple DEwalt 7485 vacuum adapter to connect chip vacuum cleaners with 100mm tube diameter Semplice adattatore aspirazione DEwalt 7485 per connettere aspiratrucioli con diametro tubo 100mm
I've seen a few fence spacers but none that would really work with the Dewalt DWE7485 A common issue I was having with clamping offcuts to the fence was the fact there's a push stick and not really too much room on the fence to clamp…
This is yet another case for the LilyGo T-CAN-485 module, my first attempt left the connectors of the PCB exposed. This time the case has a 12 mm cable gland (PG7) where the wire enters. There are still holes in the lid for the reset and…
This model is compatible with the lego system.
BOX DIN for wemos D1 Mini & RS485-Modbus Converter
I took the wonderful work by CMDRTheoJones and just made a simple modification to allow the use of a 90 degree pins soldered to the expansion ports. Although the cut out existed sliding the board in was a little difficult due to the usb-c…
My sample is for ESP32 c3(s3,c6 etc) supermini https://www.aliexpress.com/item/1005009014269977.html ttl to RS485 adapter https://www.aliexpress.com/item/1005006027343580.html mini Buck 5-30V to 5V…
The chamfer makes the part compatible also with countersunk wood screw.
Made this to enclose my DIY Open DMX. It will be used to run my MiniLED moving heads from eBay. USB RS-485 to DMX You can buy this here! https://www.makexyz.com/store/usb-rs-485-to-dmxxlr-case-95eda30fbea0a5ab0e2d973d72049946 Print…
This is a WIP to create an enclosure for @Tysonpower's DIY Hörmann RS485 Bridge v1.2 (HCP Emulator) PCB. Model was designed for tight fit , your printer must be correctly calibrated or parts might not fit. Enclosure characteristics:…
This hex bit holder holds 10 bits and a bit holder. It is supposed to be screwed to a Makita drill using the screw hole at the drill handle. The bits and holder are held by small magnets. Always have your most useful bits at hand! You…
The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485…
It's made for the USB RS-485 converter with FT232RL + SN75176. The XLR plugs are from AliExpress. I simply glued the module into the case, and the XLR plug is secured with 2mm screws. The lid is also secured with 2mm screws. Links: XLR:…
Einstellbare Saumführung für die CoverStyle 4850 und div andere mit M4 Gewinde
This minimalistic case for the nice CAN-bus and RS485 interface ESP32 board of LilyGo named LilyGo ESP32 T-CAN485 has a snap-on top with holes for the RGB-led and the Reset and Boot buttons. The sides of the case have openings for the…
JK BMS v19 rs485 board mount plate compatible with Communication Interface Board P-Link-CR-V2.0 for Smart JKBMS
the lilygo T-CAN485 board slides in easily and still allows access to all the headers on the board and it allows access to the sd card slot on the bottom
Used the hinge and support designs from https://www.thingiverse.com/thing:1250943 as inspiration, with slight alterations. As for dimensions, some inspiration was taken from https://www.thingiverse.com/thing:2005920 .
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Dewalt DWE7485 to Festool 27mm hose adapter
Washer tank lid adapter Changan UNI-S / CS55plus for VAG 6V0955485 Maybe it fits another model Changan Print in TPU 95A No PLA or PETG
Summary Enclosure for USB-RS485 adapter, several versions, available with window for access to RX-TX jumpers. RX-TX jumpers, e.g. may be required to connect a logic analyzer. Models in STL, STEP, SolidWorks 2020 format. BOM Self-tapping…
Soporte para sujetar adaptador RS485 de la BMS JK. Diseñado para atornillar a superficie con 2 tornillos avellanados
My Shimano M485 had one of the pistons quite stuck, which resulted in one of the brake pads being completely worn out rather quickly. I used this to keep the other piston (the one that still moved) in place and to then exert pressure on…
Remix to take an Neutrix XLR plus added features so the PCB stays in place without needing glue. Printed with a 0.6mm nozzle with 0.3mm layer heights in PLA
This tool is used to release the connector for the RS485 (MODBUS) port on the FOXESS Invertors. I have included the step file in case anyone wants to tweak the design but it seems to work as it is. Print Settings Printer Brand:…
osVAC Y-Adapter for the DeWalt DWE 7485 table saw, for the lower vacuum port. osVAC Y-Adapter für DeWalt DWE 7485 Tischkreissäge, für das untere Absaugrohr.
Steps the dust exhaust port down to a size a standard shop vac can attach to.
At work we got this stamp for documents. It includes the workers name and the actual date. Because we keep the stamp in our backpack the original packaging was trash after a few weeks. I created this case to keep my stamp safe. For my…
Als ich meine Tischkreissäge geliefert bekommen habe, war das Handrad zum Verstellen des Parallelanschlags kaputt. Kurzerhand habe ich es nachgebaut und gedruckt. Es funktioniert tadellos. Passt für: DWE7485 DWE7492 (in der Theorie sollte…
A simple sleeve designed to insulate the asi485mc - reducing condensation and for better cooling performance. Covers the ST4 port - might need some post-processing for a perfect fit with the USB port
Click fit top, allows access the header pins and SD card on the rear. The side mounting bars can be printed or removed body
uses the original m3 bolts with 125mm spacing to mount a Huawei R4850G2 power supply under the seat of the city el
Settings for my hose and Dewalt 7485. No supports, print fine.
Printed in PETG, without supports. oriented as in the picture This mount allows you to secure a Elfin EW11 RS485 to Wifi module with a screw or with double side tape
End cap with 7/16-28 UNEF thread for Amphenol Ceres Mini Size connector for comm cables on ePropulsion outboard motors
Description: This is an enclosure designed for an RS485 sniffer used to enable communication between the JK inverter BMS (JK-PBx BMS) and ESPHome/Home Assistant via ESP SERIAL (UART-TTL) + SERIAL TO RS485 + ETHERNET CABLE, as part of the…
Universal Öl-Einfülltrichter - Adapter / Trichter / Ölwechsel Einfüllhilfe KFZ Öl Verschlussdeckel AUDI VW SEAT SKODA (3Pins) 06Q 103 485 D 4Zylinder-Ottomotor 2,0L 888evo4 Grundmotor T2H / T2g / TX5 / TX6 / T3Q / TX9 / T3J / T8Y PR: 4BI…
Support for DIO 54855 lighting module. Print support: YES Materials: 2 screws M3 x 6 Fix the support on the clips for fixing on the din rail (standard 35mm)
This enclosure is designed around the PCB available on github: https://github.com/haklein/r4850g2_arduino/
now with mouting holes and a top ive printed in PETG. Works fine so far.
Universal Öl-Einfülltrichter- Adapter Trichter Ölwechsel Einfüllhilfe KFZ Adapter für AUDI VW SEAT SKODA (4Pins) 05E 103 485 C bis 31.12.2019 1,5L PR: DS9 / D8I 05E 103 485 J ab 01.01.2020 1,0 Grundmotor TJ4 / TC5 1,5L D8I / T3KJ…
A simply mount for this board
This bracket is designed to hold six of the Light-O-Rama USB485-ISO Isolated Adapter. It may also work with the USB485B (Adapter with Booster) but I have no way to confirm that as I don't own one for a size comparison. Corner screw holes…
cover for the pillar between the doors
ORGANIZER GT485 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Designed to hold an esp32 C3 from DIYMALL brand (see below) with external antenna , and a rs485 ttl board. Power is supplied via usbc. https://aliexpress.com/item/1005008047249439.html https://aliexpress.com/item/1005008393340702.html I…
LaskaKit ESPlan ESP32 LAN8720A MAX485 PoE v1.0/2.1 3D model vývojové desky LaskaKit ESPlan ESP32 LAN8720A MAX485 PoE v1.0/2.1 Stránka produktu: https://www.laskakit.cz/laskakit-esplan-esp32-lan8720a-max485-poe/ Github:…
I made a new vesion of the enclosure from Marco64 to mount the enclsoure on a wall. I also changed the PG7 entry to PG7 & PG9 threaded entries. Because of the PG9 I had to chnage the lid a little bit.
This is a case the RS485 to WiFi adaptor for epever products. https://www.tindie.com/products/plop211/epever-rs485-to-wifi-adaptor-v15/ It's a very snug fit but stops things moving and looks great once installed. Print Settings Printer…
Required materiel 2x Zipties 2x M3x10 Socket head Cap Screws 2x M3 Heat insert nut 1x RS485 converter PCB eg.…
We purchased a new (to us) home and were disappointed to find that our refrigerator's butter compartment was missing its door. After a year or so of the butter falling out when we'd open up the refrigerator, I tracked down the replacement…
A simple enclosure for a USB RS485 interface. The onshape model is available here .
Din Rail RS485 converter mount. eg for mounting the modbus tcp controller on a home batterie like marstek. Mounting can be done by using 6mm magnets. V2- easier mounting the module on the DIN rail mount. Parts: RS485/232Converter…
Case for Waveshare RS485 CAN HAT + Raspberry Pi 4 for mounting on a DIN rail Print the spacer with a brim Screws/Standoffs for assembly: M2.5 x 12 screw M2.5 x 6 + 6 standoff M2.5 x 8 + 6 standoff M2.5 x 10 nut M2.5 x 12 screw
Mahindra 485DI Tractor Front Hub Seal and Mold to make one out of rubber
This is a simple 3D Printed mount for the ADA4857 mount by Rene Wolf that allows you to stick it to the back of your VHS player. The mounting holes are designed for m3 heat inserts, and the back of it has space for 2x 8x3mm magnets to be…
needs 4 x M4x8mm bolts to mount Uses 40mm mounting holes
This is a reference model to assist in creating cases and other accessories to the RS485 Breakout Board ( https://wiki.seeedstudio.com/XIAO-RS485-Expansion-Board/ ), and I have included the XIAO ESP32-S3 and Wio-SX1262 module models, not…
While working on my 535is I needed the vent hose that connects from the valve cover to the intake boot. I had ordered the part but it hadn't arrived yet and I wanted to start the car to troubleshoot some other issues. I created this model…
Touch panel for smart home control via Modbus RTU RS485, featuring 4DI/DO, 1-Wire communication with DS18B20 temperature sensors, and additional digital and analog inputs. 12VDC power supply, Modbus address settable with a dip switch.…
Hier bekommt ihr eine 19" 2HE Rack Halterung für den Waveshare RS232/485/422 TO POE ETH (B) Adapter. Ein Modbus TCP Gateway mit PoE Anschluss. Ich nutze ihn um eine Heidelberg Enrgy Control Wallbox mit eine Fronius Symo Gen24…
A replacement to the pin block for the 6th pin for IntelliVue TRx4851A Telemetry Transceiver.
A 3D-printable enclosure for the LilyGo T-CAN485 (ESP32 + RS485 + CAN). The box is just big enough for the PCB. The screw-terminal plugs stick out through slots in the end walls, and the box clips onto a TS35 DIN rail. Files…
