Liczymy pasujące modele…
peut se mettre pour la grille gauche ou droite imprimer en ASA ou ABS si vous voulez la boule : https://cults3d.com/fr/mod%C3%A8le-3d/gadget/renault-scenic-3-b-pillar-vent-adjustment-knob-734510001r
This model is compatible with the lego system.
This model can not be printed without support, so i build in support (highlighted yellow in the screenshot) wich have to be removed to be able to insert the new feet in to the keyboard. The support has a 0.15mm seperation gab, wich should…
Deskstand for iCom ID-5100 dual band radio head. Radio sits on a 22.5 degree slant and utilizes two metal pads in the rear to take advantage of the magnetic mount option of the radio without using the factory plate. In addition, I have…
The display can be attached directly with the two rear screws or it can be attached with the MBA-2 kit with the moguls to be able to detach it. There is no need to print with supports.
Since i dont have the original part anymore, this is a version made to fit and to work. It needs to be made out of FLEX material and is just slid on the viewfinder
Frame for Samsung Active 3D Glasses Frame SSG-5100GB. No support. Just put glasses in the frame.
Adapter für Mini-Einhandklemmen Wolfcraft (passt auch für Duro) zur Befestigung in T-Nut-/C-Profilschienen. Ich benutze sie zur Befestigung von Werkstücken auf meinem Bohrtisch.
Low profile remix of this bracket.
Due to the lack of a available commercial version, here is my own video cage, tried with a sony a5100, should also work with a sony a5000, but i'm unable to test it. Arca Swiss compatible rail in the bottom, two accessory mounting points…
This bracket is customized for the Icom ID-5100 radio; it may fit others, but download and customize http://www.thingiverse.com/thing:1656280 to customize for another radio! Make sure you use thick perimeters for strength! I recommend…
For some time, I'd used a pair of zip ties to keep the SP-35 speaker attached to the suction cup mount for the Icom ID-5100 controller head, but this 3d printed bracket is a sturdier (and tidier!) solution. You will need: The Icom ID-5100…
A cover for the ID-5100 so it does not get direct sun light. Slides on and off the head unit easily. I have been using this cover for over a year with out issue. Printed in PETG for better UV resistance. No guarantees this will work for…
Edit 1/30/26- thickened plate and added an extra hole to allow the bolt to countersink Will fit standard crazy cart using stock controller mounting holes and one side hole from the plastic covers Reuses the original mounting screws for…
The original snapped off while driving down the road - it took over a year of vibration. I added a fillet at the base blase that mounts to the metal radio mount that magnetically seals to the control head. I'd recommend printing this with…
The remix link will show you how to assemble it (basically fill it will screws until it doesn't come apart). Original author says he had to make it with ASA. I found that with PET it's a bit flimsy so I beefed up the thickness of the…
This is a friction faceplate that covers the gaps left when installing an ID-5100a into the CD changer console spot in a Lexus LX470. It can be printed on a Prusa MINI (cause that's all I have) and must be printed with supports. I suggest…
This part will let you replace the magnets on the back of the ID-5100's display with a 1 inch ball that works with ball and socket systems such as Ram Mounts B size arms.
I made this model of my D5100… *** Need some correction on the base for better adhesion. *** Enjoy, If you like my model and / or want to do a donation please follow my on my Patreon. https://www.patreon.com/c/Frixo?vanity=user
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
So I have two of these Wolfcraft clamps and a while ago one had a broken spring. It didn't work anymore which is why I came up with this repair kit. The kit consists of the two printed parts as well as three parts you need from the…
Dies ist eine Halterung um eure Maker Base oder auch Flipsky Regler fest und sicher auf eine Holz Oberfläche zu Montieren. Es werden ledeglich zwei M4 Holzschrauben benötigt, der Regler selbst wird dann nur noch eingeklipst. Es wird…
PSX DVR's that i have encountered has a notorious fault of broken hinge on the front cover. This is my design for repairing front cover hinges. Print to of this part, one normal and one mirrored. Shave the remaining plastic hinge on the…
This table clamp allows you to mount the Makita PW5100C to a table for polishing rocks. It keeps the PW5001C in its intended downward position, while allowing you full access to the polishing pad. Having it in the downward position also…
Got this case with a missing cover for the 5.25" bay. Thankfully had one original cover that used as reference. This is identical to HP Spare 166775-004. You'll find 2 models, one with the full height on the entire piece, another with…
Bosch Cool 2000/4000/5000 – Window Hose Adapter inspiriert durch https://www.printables.com/model/957328-bosch-cool-200040005000-fast-simple-window-hose-ad Adapter plate for mounting on wood or plexiglass, with one key advantage: you can…
Hi, here is another keyboard riser I designed for my work mates. It only fits on the Cherry DW5100 keyboard but perhaps some one can find inspiration on the simple hight adjustment concept. I can't say for sure but maybe sometime in the…
Resized, customized a bit for this little module (which lacks any mounting holes of any kind). Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.3 Infill: 10% Notes: PLA Category: Electronics
Please comment, rate, and post a make! Just a simple cover for the Govee H5100 hygrometer. I have a number of these in two snake enclosures and they stuck out like a sore thumb. Bottom notch allows for getting the battery cover off and…
Warning: Please use this bracket with a rack tray. Otherwise, it may not be able to handle the weight of the switch. Use as your own risk. This is a rack mount bracket for Juniper QFX5100. Use 4 M4* 8mm screw to mount this bracket onto…
I designed this mount so I can have my Windows 11 fingerprint scanner attached to the underside of my desk. The previous scanner I had was smaller and hot gluing it to the underside of my desk worked fine. This new scanner, which works…
This allows me to use some random suction cups I had on hand to stick the wireless sensors to the inside of a reptile enclosure. I doubt this will be a direct fit for many suction cups due to the wide variation of suction cup ends, but…
Streamlight Stinger 75100 Charger Snap Mount for Multiboard .4 nozz, 3 walls, 15% gyroid, Polylite PLA Pro
Another reference modal. Feel free to print it for prototyping or whatever you need it for! If you're wondering, this is what I modeled it for: https://dpow.net/3d.html
As I was building my fake Rivendell bike, I needed to move the chainring a bit more towards the center of the bike frame to decrease potential crosschaining when using the largest cog on the rear cassette. I crated this spacer that…
This is mount for designed for Sony's PSX DVR DESR-5100 original HDD cage so you are able to install FC1307A with RepairBox firmware so you can trick PSX treating it like it's original HDD. What you need? FC1307A IDE to SD adapter flashed…
Hisense HS5100 Soundbar TV Mounting brackets for Hisense 65u6n Pro TV. I used 3mm x 19mm chipboard screw for the keyhole Brackets are fitted into the inside TV feet mounting positions.
This project involved redesign of a coworker's original hanger prototype to accept Leviton 5100-IPS power strips. These were also designed to mount on a 1" thick desktop surface with enough room for thick dual-stick tape (Gorilla tape or…
Stand for the Philips Norelco 5100 trimmer, available here: http://a.co/3OZYDEN It doesn't come with a stand or have one available. I attempted to incorporate the charging cable into this stand, thus the added height and hole in the…
This model is for mounting an "EBike" style VESC 75100 to a bike seat post tube with hose clamps. The mount is designed for a bike tube diameter of 35mm, but this can be modified in the attached Fusion 360 archive file by modifying the…
Deckel für Milchshaker als Spritzschutz.
DIN Rail Carrier mount plate for the FLIPSKY 75100 V1 VESC. Slide the FLIPSKY into the slot on the back size and secure the other side with a single M4 screw.
https://www.thingiverse.com/thing:3569530/ Remixed the VESA mount to work with the faceplate of an Icom 5100 radio. This mount will work with the Articulating Arm here: https://www.thingiverse.com/thing:2448971 Shown in pictures with the…
I found Bash Ring for Shimano FC-5100 Crankset (32t) by i32 ( https://www.thingiverse.com/thing:6905994 ). but it didn’t work with my 30T chainring. This is inspired by that, but I changed diameters, and thickness, removed material around…
For use with the orange caps. Cartridges clip in as they do into the printer.
This model is designed to hold a Flipsky/Makerbase "EBike" style VESC 75100 vertically to allow it to be filled with a potting compound to waterproof it. 2x M3x8+mm screws are used to hold the ESC in place. I used hot glue to seal the…
Wall mount for the Zyxel PM5100-T1 ONT and similar with an internal compartment to store the excess fiber optic patch cord. ISP-supplied patch cords are usually much longer than needed when the ONT sits next to the optical termination…
Montiere das Display des Icom 5100 an Deiner Sonnenblende. Die Halterung wird nur aufgeklemmt und muss nicht geschraubt werden. Mount the Icom 5100 display on your sun visor. The mount simply clips into place and does not require screws.
No hardware cover for the BE5100 and BE6500 access points by Zyxel. It is held in place with pins that extend into the screw recesses I printed mine in PLA with the top PIN SIDE on the plate and internal organic supports. The cutout is to…
For the controler not motor it was late so i was con fused some drilling may be required
The original plastic cover on the folding release cylinder of my Sparnod STH-5100 treadmill broke, so I designed and 3D
The purpose of this file is to enable you to replace a broken hinge piece for a fridge door compartment (e.g. the compartment in the door for butter, or eggs, or whatever else you have to cover when the door is closed), rather than spend…
This is my approach to seal our window using a monoblock AC unit, it meets the specifications of a Bosch cool 5100 but should fit other Bosch units as well. The handle i used was this:…
There is no official DeWALT insert for TSTAK II cases to hold a DCG405FN flat head angle grinder. I have created this part to be installed on the DeWALT N510043 insert (originally designed for DCG405 angle grinder) to support it properly.…
Unable to mount a mobile radio in a Tesla Model 3 or Y, I designed this bracket to cleanly and unobtrusively mount a radio head and speaker. Also includes a mic hook. Affiliate links below. Print with 100% fill. Assuming you already have…
peut se mettre pour la grille gauche ou droite imprimer en ASA ou ABS si vous voulez la boule : https://cults3d.com/fr/mod%C3%A8le-3d/gadget/renault-scenic-3-b-pillar-vent-adjustment-knob-734510001r
Edit 1/30/26- thickened plate and added an extra hole to allow the bolt to countersink Will fit standard crazy cart using stock controller mounting holes and one side hole from the plastic covers Reuses the original mounting screws for…
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
No hardware cover for the BE5100 and BE6500 access points by Zyxel. It is held in place with pins that extend into the screw recesses I printed mine in PLA with the top PIN SIDE on the plate and internal organic supports. The cutout is to…
Unable to mount a mobile radio in a Tesla Model 3 or Y, I designed this bracket to cleanly and unobtrusively mount a radio head and speaker. Also includes a mic hook. Affiliate links below. Print with 100% fill. Assuming you already have…
A box with a lid for Ардуино UNO + UNO Proto Shield +Ethernet shield W5100
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
Bracket to adapt the Icom ID-5100 Head unit to a Lido mobile mount bracket. Mounts with thumb screws to radio.
