P
PrintablesEA3D
DC motor with 1:48 gear 3-6V with double sided shaft 200RPM
4-11-22 updated model with stl parts
- Pobrania
- 3089
- Polubienia
- 172
- Ocena
- 5
Wyniki wyszukiwania: 6v
Liczymy pasujące modele…
P
PrintablesHenry Levesque
Generic 3-6V DC Motor Model
A Model of a generic 3 to 6 Volt DC Motor
- Pobrania
- 1291
- Polubienia
- 22
- Ocena
- 5
P
PrintablesSimple3D
Bosch 36V Ebike Battery connector & DIY 2A Charger
I wanted to be able to charge my Bosch Powerpack 500 battery in my car when I'm on trips. Unfortunately the standard 4A Bosch charger pulls 170Watts which is more than my car's AC Inverter can support. I also tried to use my 300Watt Pure…
- Pobrania
- 1135
- Polubienia
- 61
- Ocena
- 4,67
P
PrintablesAXUL
Enclosure for XH-M609 Low Voltage Disconnect 12V 24V 36V Over-Discharge Protect For 12-36V Lithium Battery
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
- Pobrania
- 701
- Polubienia
- 51
- Ocena
- 5
P
PrintablesFlorian
1V 2V 3V 4V 5V 6V Connector for Geodesic Dome with customizer
Remix from existing designs, i would like a hub generator to enable everyone to do it own. Hubs works with 1V, 2V, 3V, 4V, 5V, 6V geodesic dome Strut profile : rectangle or round use Dromerama calculator to get Strut sizes :…
- Pobrania
- 678
- Polubienia
- 82
- Ocena
- 5
P
PrintablesBielo95
Gearbox adjustment tool (VW 3104) Golf 2 gti 16v
Plate needed to adjust the gearbox linkage on a Volkswagen Golf II GTI 16V. Tool VW 3104
- Pobrania
- 505
- Polubienia
- 17
- Ocena
- 0
P
Printablesjon
GSI 16v logo emblem opel vauxhall
A teenager stole GSI 16V logos from my wife's Astra mk3, needed replacement fast…. Color change at, 2,00mm , and 3,00mm. First version, I hope upgrade this model, I know it has some errors, but its functional and…. free ! EDIT: added…
- Pobrania
- 455
- Polubienia
- 23
- Ocena
- 0
P
Printablesmetzgarj
Another Ego 56V battery wall mount
Print where the EGO logo is upside down so that supports are not needed. The long flat narrow curved edge will be touching the build plat. Infil percentage can be very low. I used 20%. I have mostly 2.5 ah batteries but this will hold my…
- Pobrania
- 432
- Polubienia
- 44
- Ocena
- 5
P
Printablesmaot1985
Einhell Batterie Adapter 18V auf 36V
Der Adapter lässt sich ohne Stützstrukturen drucken. Benötigt werden 4 rote 6,35mm Crimp-Stecker und eine XT60BE-F Buchse sowie Kabel mit ausreichend Querschnitt (≥1,5²). Im Bild sind die Kabel noch nicht zu sehen, aber die Kabel können…
- Pobrania
- 366
- Polubienia
- 60
- Ocena
- 5
P
Printablescharlescho
Makita 36V Track Saw Arbor Hole Dust Cover
The spacing between the snapping tabs were increased by .7mm. Now it fits perfectly. I also changed the orientation so the front faces down on the print bed.
- Pobrania
- 263
- Polubienia
- 20
- Ocena
- 5
P
Printables3DPS
Ryobi battery holder (36V)
A simple holder designed to fit the Ryobi 36 volt (may be called 40V in some regions) in a vertical position.
- Pobrania
- 252
- Polubienia
- 27
- Ocena
- 5
P
PrintablesCatchMyDrift?
Toyota 4AGE 16V cam covers
These are some 3D printable cam covers modeled after the ones on the Toyota 16V 4AGE. This is mostly just for funsies/decoration because I doubt the features are going to be accurate enough to use as a reference. The models are 1:1, so…
- Pobrania
- 220
- Polubienia
- 26
- Ocena
- 0
P
PrintablesSlanjonok
Vulcan 6VF/6PF lorry – basic versions (1-148)
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- Vulcan Motors was a smaller British car and truck…
- Pobrania
- 219
- Polubienia
- 23
- Ocena
- 0
P
PrintablesOndřej Stříteský
18650 LiFePO4 battery 2S2P holder - 6V
I used it as a motorcycle battery in JAWA 250/353 instead of leaded 6V battery. It saves a lot of place. Used cells are LiFePo4. Print instructions Printed from PETG or ABS
- Pobrania
- 210
- Polubienia
- 35
- Ocena
- 0
P
PrintablesCrazyCzech
10S4P (36V) 18650 Li-Ion battery pack for e-bike remixed with tiedown slots
10S4P (36V) 18650 Li-Ion battery pack for e-bike remixed with tiedown slots E-bike battery pack with case, and 18650 battery holder for 40 cells remixed with 3 slots for zip-ties or other tiedowns
- Pobrania
- 208
- Polubienia
- 33
- Ocena
- 0
P
PrintablesJay
Ebike universal Battery Mount, Holder "Electric v1" for 36v 10-14ah 18650 Cells
I have designed the "Electric" Ebike Battery Mount for myself, but i decided to change it with you all. My Battery has 36v, 12ah and is 70x40x293mm. I have bought it on aliexpress, something like this. Battery-Pack 36v - 12ah Or you can…
- Pobrania
- 203
- Polubienia
- 46
- Ocena
- 5
P
PrintablesLegacy_Micro
BASIC MODEL: XY-SK120X BOOST BUCK MODULE (0.5-36V 0-6.0A 120W)
BASIC MODEL: XY-SK120X BOOST BUCK MODULE (0.5-36V 0-6.0A 120W) Just a basic model of the XY-SK120X BUCK/BOOST Module
- Pobrania
- 200
- Polubienia
- 19
- Ocena
- 0
P
PrintablesRobul
Multiboard Bosch 12V / 10,6V Battery Holder
Die Halterung für 12V Akkus von Bosch Professional ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt…
- Pobrania
- 199
- Polubienia
- 26
- Ocena
- 5
P
PrintablesDarthbarney
HOTO Electric Screwdriver 3.6V Cordless Skadis Wall
HOTO Electric Screwdriver 3.6V Cordless Skadis Wall Printed in PLA+ on Ender 3 Pro I've both a tight version and one with a bit of looser (recommended)
- Pobrania
- 195
- Polubienia
- 39
- Ocena
- 5
P
Printablesmarcel293
Bosch 36V battery wall mount
I designed a battery wall mount for my 36V battery by Bosch. I looked for wall mounts to print, but for me they were too material intensive, so I created my own one. You can fix it at the wall with four screws (in my case 3x12 TX10).…
- Pobrania
- 185
- Polubienia
- 12
- Ocena
- 5
P
PrintablesCrashDown77
DEWALT - Držák na baterii/Battery holder 18/56V XR
Jednoduchý nástěnný držák na beterie DEWALT 18/56V XR. Prosté jednoduché výstižné Simple wall mount for DEWALT batteries 18/56V XR. Easy, simple, fast
- Pobrania
- 184
- Polubienia
- 8
- Ocena
- 5
P
Printablespiwi3910
Mellow Fly SHT-36v2 mount for Stealthburner/CW2 CANBUS/VORON
I remixed the original to allow a Mellow Fly SH-36v2 CANBUS board to mount on the Voron Clockworks2 Stealthburner I've also made the umbilical mount a bit ticker and longer to allow for better mounting with colson-ties
- Pobrania
- 182
- Polubienia
- 20
- Ocena
- 0
P
PrintablesAnubis X
Bosch old 9.6V battery adapter to Makita
Battery adapter for Bosch cordless screwdriver 9.6 volts to Makita battery 14.4 volts.
- Pobrania
- 180
- Polubienia
- 24
- Ocena
- 5
P
PrintablesMr.Ramtech
Virgin Sagemcom F266v2LG-VMB Wifi Extender
A simple wall mount for the Virgin Media wifi extender Sagemcom f266v2LG-VMB.
- Pobrania
- 179
- Polubienia
- 3
- Ocena
- 4
P
PrintablesDH_Beng
Laptopstand for Lenovo ThinkPad P16v Gen 2
I created this laptop stand for my Lenovo ThinkPad P16v Gen 2. It should hold other laptops as well, provided they are not higher than 26 mm.
- Pobrania
- 174
- Polubienia
- 23
- Ocena
- 5
P
PrintablesSchlonky
Voron V0.2 Mellow FLY SHT36V2 mount
Modified Umbilical Toolhead mount, to fit a Mellow FLY SHT36V2 on the Voron 0.2 Mini Stealthburner, with strain relief. Heater wires might be a bit tight, could possibly resolder the terminal screws on backwards.
- Pobrania
- 163
- Polubienia
- 31
- Ocena
- 4,5
P
PrintablesDavid
Weber DCOE 45 Intake for Golf Mk2 GTI 16V
Link to https://cults3d.com/en/3d-model/various/weber-45-dcoe
- Pobrania
- 159
- Polubienia
- 19
- Ocena
- 0
P
Printableszuzzi76
Sht36v2 mount for printhead vzbot
Support for sht36v2 mounted behind the stepper motor, To ensure that the PCB can be positioned behind the stepper motor I also modified some parts of the vzbot printhead. BOM: 2x spacer 12mm 3x m3x8 1x m3x6 1x insert nut M3 x 4
- Pobrania
- 159
- Polubienia
- 25
- Ocena
- 0
P
Printablesatypicalengineer808
EGO 56V Lawn Mower Safety Key
Update 09/05/2019: Did a redesign of this, and did a test this afternoon. Deleted the old STL file. For additional strength, I printed this rotated 59.5 degrees, so that the face down on the bed was flat (see picture). EGO 2823802000 Lawn…
- Pobrania
- 152
- Polubienia
- 9
- Ocena
- 5
P
PrintablesSlanjonok
Vulcan 6VF Artic Versions (1-148)
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- For more information see Basic version of this…
- Pobrania
- 149
- Polubienia
- 17
- Ocena
- 0
P
PrintablesCarlos 3D
CR2032 6V NO SOLDERING
Here is a solution when you need to work on a small space and you don't have any Ironsolder around. Perfecto for small projects as the following.
- Pobrania
- 144
- Polubienia
- 29
- Ocena
- 4,5
P
Printablespaceadventureworks
10s2p (36v) 21700 battery pack w/ BMS
This model includes 2 pieces, an upper and lower case for a 10s2p battery pack. Dimensions are 150x95x76mm (about 155x100x80 after heat shrink wrap). 8mm wide slots along top and bottom for 8mm nickel / copper strips. The design loops…
- Pobrania
- 135
- Polubienia
- 19
- Ocena
- 0
P
PrintablesYBars
Box for module XY-SK120 DC-DC 6-36V
I needed a case for the popular SK120 module. I didn't like the designs that were on the Internet and made my own. The SK120 module is tilted at an angle of 60 degrees, which allows you to see the displays on the display well. Print…
- Pobrania
- 133
- Polubienia
- 17
- Ocena
- 5
P
Printablesgyrex
Ozito 18V PXC to Ryobi 36V/40V Battery Adapter
I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell…
- Pobrania
- 123
- Polubienia
- 25
- Ocena
- 5
P
PrintablesSpyder7022
4R25 6V Blockbatterie AA Adapter / 4R25 6V block battery AA adapter
Adapter um AA Batterien in einer 6V Blockbatterie Configuration zu nutzen (Laternenbatterie) Draht von Unten einführen und auf der oberseite in die vertiefungen biegen. Erste AA Batterie einführen, dann Druckfeder und dann die zweite…
- Pobrania
- 121
- Polubienia
- 10
- Ocena
- 0
P
Printablessorenrandum
Bosch 36V Wall Mount
wall mount for the Bosch 36 V battery. the wall mount can be attached with 4mm screws.
- Pobrania
- 120
- Polubienia
- 7
- Ocena
- 5
P
PrintablesTom Yum
4A-GE 16V distributor cover
I made this when I was converting my AE86 to a coil-on plug setup.
- Pobrania
- 119
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSlanjonok
Vulcan 6VF Towtruck Version (1-148)
For more information see Basic version of this lorry: https://www.printables.com/model/1043344-vulcan-6vf6pf-lorry-basic-versions-1-148 There you can find also more cab-versions and the driver figure. Here tow truck or wrecker versions of…
- Pobrania
- 115
- Polubienia
- 14
- Ocena
- 0
P
PrintablesZedic
Tyco Taiyo 9.6V Bumper Turbo Hopper Heads-Up Wild Thing Blaster
Tyco Taiyo 9.6V Bumper Turbo Hopper, Heads Up, Wild Thing, Blaster, FX4, Jet Hopper Front Bumper 9.6V Version! This Bumper fits many of the 9.6v Tyco & Taiyo Buggy Models Want More Free Designs? Like and Comment! If you enjoy this design,…
- Pobrania
- 114
- Polubienia
- 7
- Ocena
- 5
P
Printables05WEL
2xOzito battery to Ryobi 36v
2xOzito battery to Ryobi 36v I don't have many 36V tools to test fit, so some adjustments may be needed. Let me know and I can make amendments if needed. Just need some spade terminals, M3 nuts M3x100mm bolts, wiring. If you like this…
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 0
P
Printables3D Print for life
Bosch 36V Ebike Battery connector with CAN pins (5 pins) 100W
Use an Arduino with MCP2515 to Power on the Ebike battery (MCP2515 lib needed) Used the components as described in https://www.printables.com/model/49417-bosch-36v-ebike-battery-connector-diy-2a-charger Isolate with heat shrink and hot…
- Pobrania
- 92
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v4 Controller PSU Mount
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
- Pobrania
- 89
- Polubienia
- 9
- Ocena
- 5
P
PrintablesRinoa Lilieu
CR2032 holders Single, Double, and Triple Series for 3v 6v 9v (No support needed)
A quick 3d model to hold some CR2032 cells in series for a project. Easily thread your wire through the side holes to make contact, you can adjust the tightness by changing the width scaling in your slicer. To support me, donate to my…
- Pobrania
- 87
- Polubienia
- 18
- Ocena
- 4
P
PrintablesWissencat
Voron LGX Canbus SHT-36V2 or Style Mount for Trident / V1.8 / V2.4 with Step File
Voron LGX Canbus SHT-36V2 or Style Mount for Trident / V1.8 with Step File Parts Needed 4x M3x4 Threated Inserts Canbus Mount and Drag Chain Mount 2x M3x12 Drag Chain Mount 1x M3x6 Screw for the Cable Cover
- Pobrania
- 81
- Polubienia
- 19
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v3Controller PSU Mount
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
- Pobrania
- 79
- Polubienia
- 9
- Ocena
- 5
P
Printableskvn5x4
EGO 56V Battery Mounting Bracket - Proslat
Unsatisfied with the limitations and individual costs of Proslat mounting hooks, I reverse-engineered the EGO battery to create a secure, seamless holder designed specifically for Proslat walls. Two variants are provided: Single-body…
- Pobrania
- 76
- Polubienia
- 5
- Ocena
- 5
P
Printablescarvellwakeman
Adafruit 6V 6W or 9W Solar panel Mount and Rotating Base
Edit 10/4/2021 - My requirements changed and so 6W is no longer enough. Updated the mount to also support the 9W solar panel. Designed for use with the Adafruit 6W "huge" solar panel and 9W "colassal" solar panel…
- Pobrania
- 76
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSireInsectus
AMS1117, 5V Out, 6V to 12V in Step-Down Linear Voltage Regulator Module
See https://www.amazon.com/AMS1117-5-0-Step-Down-Voltage-Regulator-Module/dp/B078BCCDN1/ref=sr_1_7_sspa
- Pobrania
- 75
- Polubienia
- 7
- Ocena
- 0
P
PrintablesCristi
Bosch accu support - 36V
Support for the 36V battery from Bosch.
- Pobrania
- 74
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCristi
Another Bosch accu support - 36V
Another support for the 36V battery from Bosch (refined in OnShape).
- Pobrania
- 72
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSlanjonok
Vulcan 6VF in urban service (1-148)
For more information see Basic version of this lorry: https://www.printables.com/model/1043344-vulcan-6vf6pf-lorry-basic-versions-1-148 During research work for this truck I found some pictures of a garbage collecting version here:…
- Pobrania
- 71
- Polubienia
- 8
- Ocena
- 0
P
PrintablesChrisi13m
Husqvarna Akkuhalterung (BLi-X-36V-System)
Mit dieser Akkuhalterung zur Montage auf der Wand können Sie einfach Ihre Akkus von Husqvarna, die das "BLi-X-36V-System" haben, verstauen. Dank der leicht schrägen Rückwand bleibt der Akku stabil in der Halterung. Befestigt wird die…
- Pobrania
- 68
- Polubienia
- 14
- Ocena
- 0
P
PrintablesKondjovi
16v emblem for Golf MK2 GTI 16v
16v emblem for Golf MK2 GTI 16v
- Pobrania
- 68
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMarin
Lithium-ion Battery Pack 36V/24Ah with Enclosure
A few years ago I decided to design a new battery pack for my Tante Paula Scooter to skip using Lead-acid batteries (12V x3) which will fit existing scooter's battery compartment. This project is now completely finished. The battery pack…
- Pobrania
- 68
- Polubienia
- 24
- Ocena
- 0
P
PrintablesOblaka3D
Case for laptops parts (Asus n56vb motherboard)
Case for laptop motherboard(ASUS N56VB). Add led strip with diffuser and wifi controller. You'll need to fine-tune it with a file a little. You can add polycarbonate as case cover
- Pobrania
- 63
- Polubienia
- 18
- Ocena
- 0
P
PrintablesAlexander Brown
Ozito 36V mower replacement key
A replacement key for the Ozito 36V cordless mower LML-036. This part is a remix of djsan2411's model on thingiverse ( Makes for Start key for Ozito 36V electric mower by djsan2411 - Thingiverse ). He kindly gave me the fusion part file…
- Pobrania
- 59
- Polubienia
- 1
- Ocena
- 0
P
PrintablesVirtus3Design
TUBE AIR INTAKE VW GOLF IV BORA 1.4 1.6 16V
Assembly: Air supply Use: Suction hose Material: ASA or ABS Reference numbers : 1J0129618B
- Pobrania
- 58
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMa Ha
EZGO 36V TXT Charge Port Cover (1999)
If you remove the factory charge port on a 1999 EZGO TXT 36V this will cover the hole. Actually it will cover all 5 holes. Also included are files in case you want to use them for templates to create something else since the hole is not…
- Pobrania
- 57
- Polubienia
- 4
- Ocena
- 0
P
Printables3DPrintingEnthusiast
1V-6V Geodesic Spheres
I designed Geodesic Spheres with varying frequencies (1V-6V). They are shapes, composed out of different triangles and are basically the extensions of an icosahedron.
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v4 Dual PSU Mount
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's The design has a in-cut on…
- Pobrania
- 54
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v3 Dual PSU Mount
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's The design has a in-cut on…
- Pobrania
- 54
- Polubienia
- 5
- Ocena
- 0
P
Printablesczaq
Low Profile LGX Lite & WWG2 - Mello Fly SHT-36V3 / EBB36 Style Toolboard with chamber sensor
This is a low-profile SHT36v3 board mount designed for Voron Trident printers. It may also fit the EBB36 board (not yet tested — if you’ve tried it, please leave feedback!). Changes from the original version: Mount lowered by 5 mm and…
- Pobrania
- 51
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBryan
Vespa 6v Battery Tool Holder - 31L3
A friend of mine was restoring an old Vespa. The battery is no longer required, so we decided to model a tool holder that looks like the original. I recycled the original filler caps, and added a plastic bar to simulate the original…
- Pobrania
- 51
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTiffi226
Bosch DIY -- Advanced LeafBlower 36V-750 Wallmount
Inspired by @DrTob's model (printables.com/model/528090), I discovered that the Bosch Professional and DIY models do not use the same housing. So I started from scratch and came up with this solution to mount the leaf blower.
- Pobrania
- 51
- Polubienia
- 2
- Ocena
- 0
P
Printableszenol
hailong 6 tab 36v battery mount
I needed a mount for my hailong 36v 5 pin battery so I found an existing wall mount for a similar battery and modified it to fit my battery and added a part to allow a spare connector to side in it.
- Pobrania
- 49
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDaversity Engineering
peristaltic pump Mount for the Yosoo 6v Dosing pump from amazon.
I designed this simple mounting system for the Yosoo 6v Dosing pump I got from Amazon .(https://www.amazon.com/gp/product/B00HLCOXFI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) I Printed With PETG and am truly amazed at how strong this…
- Pobrania
- 48
- Polubienia
- 5
- Ocena
- 5
P
Printables3D-aniel
Camshaft lock for an timingbelt change VW 1.4 / 1.6 16V
Its a tool to lock your camshaft at an timingbelt change on your VW 1.4 / 1.6 16V Engine. ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ YOU NEED: M6 Thread Drill Two DIN933 M6 Screws with a length of 20mm. Glue (If you want) ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ HOW TO: At the end of…
- Pobrania
- 47
- Polubienia
- 5
- Ocena
- 0
P
PrintablestomerCohen
New trigger for Tonfon 3.6V 2000mAh Cordless Hot Glue Gun
Print the part on its side, with 100% infill and supports. For the spring I didn't include a 3d printed holder because it was to small and weak. Instead there's a marking on the model where it should go, I took a 1mm metal wire heated it…
- Pobrania
- 43
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAntek Bezi
Ebike 10s4p 36v 18650 battery pack case
Ebike 10s4p 36v 18650 battery pack case Made in Autodesk Inventor (ipt file included)
- Pobrania
- 42
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSini33
Mount for peristaltic pump (6V from Ebay)
Simple holder for peristaltic pump which can be obtained on Ebay/AliExpress. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Category: 3D Printing
- Pobrania
- 42
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJawbones
Zyxel GS1100-16v3 10" Rack mounts
I wanted to have a Switch in my 10" Server rack, and this one was the perfect size, tho it only came with 19" rack mounts. This model uses the original screwholes & screws to fasten, and can be easily installed in your cozy home 10" rack
- Pobrania
- 39
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTommy Brodd
36v/40v adapter kompatibel med Ryobi 18v
Ryobi Adapter more space for cables Ryobi glue or press on logo
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAntek Bezi
36v 10s4p 18650 battery pack for ebike with no welding connection
36v 10s4p 18650 battery pack for ebike with no welding connection, just pressed together nickel tapes strips Made in Autodesk Inventor (ipt file included)
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v4 Expansion Board Mount
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's The design has a in-cut on…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAurel
Pololu Tic 36v4 Case
A case for the Pololu Tic 36v4. The lid is secured with cable-ties. Use cable ties to secure cables to the standoffs on the bottom of the case. An optional fan can be mounted to the top. PLA 25% infill
- Pobrania
- 36
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTestoMane
Battery Screw Caps 6V - Simson Moped Batterie
My screw for my 6V battery broke. Made an replacement for this battery. Printed in TPU without any thread, only has to be pushed into the hole. It covers the destilled water inlet of the acid 6V battery for my Simson.
- Pobrania
- 36
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSaltDaddy
Husqvarna LC 356VP handle cable clip
Since I mow on a bit of a rough terrain, I guess this clip was lost at some point and I needed a replacement. This seems to exist as a replacement part from Husqvarna and it's cheap, but at the time when I needed it it wasn't in stock…
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
Printablesneb1
Mast/Pole mount for Sunyima PET 6V 7W Solar Panel 185x270mm
Mount the Sunyima 6V7W 185x270mm solar panel to a 35mm diameter pole with this model. Available in both orientations. Panel is angled to 15° degrees. Zip-tie or hose clamp needed. Consider printing with a brim because the models are very…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
Printablesjuh
fischertechnik 6V 1W solar power module 60x120 mm
The fischertechnik solar power modules like this one (2V x 200mA = 0.4W) are often too weak under non-ideal conditions to do anything meaningful with them. This is an alternative more powerful 1W module (6V x 166mA). You can easily chain…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJakob G.
Case for Mateksys ELRS R24-P6V Receiver
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDH_Beng
E3D 6V hotend carriage for Anet AM8 MGN12
E3D V6 hotend carriage for Anet AM8 MGN12 This is a modified version of the hotend carrige for E3D V6 from BLV . It is using M4 screws to clamp the hotend to the carriage, instead of M3. The design is also using ab modified way to connect…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRaúl Caro Pastorino
Box case for HW-681 power converter Dual USB Charger board 3a (6-26v to 5v DC-DC)
This box allows you to protect the circuit in the HW-681 charging module. The charging module allows (on my board, see details on others) an input range of 6-26v DC and has an output of 5v DC up to 3a between the two ports. The design…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHun
Ender6V6 Print-head 5015/3010 blower/cooler
Print head for the Creality Ender 6 with a E3D style with 3010 clip on cooler and a 5015 blower.
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFaithLayers
Bible Verse Psalm 46v10
I created this Bible verse for my own bedroom and sharing it with love. Please note that I have changed the fond since the photo.
- Pobrania
- 30
- Polubienia
- 10
- Ocena
- 5
P
PrintablesHowToBuildABattery
High Capacity 36V Battery Kit (18650)
This is a complete kit for a high capacity 36V (10S9P) lithium ion battery built with 18650 cells. It was created effortlessly in seconds using my battery designer program which you can find here: https://howtobuildabattery.com/designer/
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v3 Expansion Board Mount
This mount will allow you to mount a Falcon F16v3 (works on V2 as well) Expansion board to a PSU. You will need to print 4 spacers. The tolerance for the spacers is tight, they should fit inside the holes on the top of the board. Mounting…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLiP
WX-2416 180W 36V Housing to XT60
After I build the type e-Lab based on a DSP5005 I wanted to power it with 36V to also cover higher outputs though more devices. Since I've haven't found a case for the 36V version I created my own. It uses a IEC320 mains inlet and XT60E-M…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHdarfjkelanfydj
Lab Adjustable 5A 1.25 - 36V Power Supply for Bosch 18 Battery
Compatible with Bosch Professional 18 Power Battery This project forked from original https://www.thingiverse.com/thing:4174640 . You can use Bosch or any other battery adapter, i.e. Makita, Dewalt, Feng Bao and etc. All components has…
- Pobrania
- 28
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTriBaKel
Honda Dax Batteryholder 6V
Simple Adapterbox for the smaller 6V Batteries. The original Rubberguides on the Sides must be removed Print Settings Printer: Prusa mini+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: Automotive
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printablesgerfz
Mini Electric Motor Shell (3-6v)
Mini Electric Motor Shell for small motors, usually 3-6v ones
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMonkichi57
Fly SHT36v3 and PUG Mount for VZHextrudort
I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3. I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
Printables3D-Muc
Frame for Blue Bird Servo BMS-A56V
Frame for Blue Bird Servo BMS-A56V or with the equal size Melt the nut with a soldering iron in to the frame Bottom closed, no adhesive on the servo
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSurfalex2000
36V = 2x18V Bosch battery replacement mount (instead of 3x12V small Lead -Gel)
With this mount you can use 2x 18V Bosch Batterys instead of 3x12V small Lead -Gel Batteries for different Toy/Teen Vehicles instead of 3x12V . For the Electric Adapter i use one from Contorion:…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMrShark
Sentry 16V-1T-B
First Sentry 16V-1T-B On Printables!! Credits to @JustPinkForNow for the rotor an stator! Print All parts and you can glue them together following the picture. uses 2 280 or 130 motors or a long dhaft. WARNING! have not been printed yet!
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTheRemi900
DC vibration motor case 6V 12V
Needed case for bigger DC motor. I used it with 6V and 12V double sided motors with 8500 RPM, dimensions are in image. 1/ Print case 2/ Place some gel double sided tape inside, or other insulation material inside. Layer it if needed. 3/…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHobbyhiasl
Lab Power Supply (PSU) fused 3CH (0-36V)
The power supply features four protected voltage channels. One channel provides a variable output voltage (SK150), while two other channels each supply a constant (pre-adjusted) voltage (XL4015). The last channel serves as a USB power…
- Pobrania
- 26
- Polubienia
- 10
- Ocena
- 0
P
Printablesjofeinmechaniker
Ersatz-6V-ACCU-(5xAA)
Ersatz-6V-ACCU-(5xAA) Spannungen können auch zwischendurch abgegriffen werden.
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDerik Whittaker
Falcon F16v4 Diff Expansion Mount
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's The design has a in-cut on…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDave Corder
Snapfit Enclosure for ESP8266 Sinilink XY-WFMS 5V-36V Mosfet Switch Module
A small box for the cheap Sinilink XY-WFMS module. It is with a snapfit so no extra screws are required.
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSong Xue
Ryobi 18V/36V Charger Shelf Hanger
Ryobi Battery Charger Hanger with Cable Organizer and Plug Holder Description: Upgrade your garage organisation with this Ryobi Battery Charger Hanger, designed for ultimate convenience and functionality. Easily installed on standard…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0