Liczymy pasujące modele…
This is a holder for a Philips Norelco shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all, so you have to dig through and find the one you need. The larger guards & blade are across the back, with the…
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
Since i like to keep everything in place, i made this box for Philips Multigroom 7000 version. It is for 13 peace guard and head version. Shaver itself fits in place perfectly!
Additional fence for the Makita PJ7000 biscuit joiner Parameter: Walls: 3 Infill: 15% Infill patttern: gyroid Support: yes Material: PETG or PLA , 112g (incl. support) Disclaimer The use of this attachment for the Makita PJ7000 is at your…
My first design I've put together. I don't have any particular input on printing this, although I did print with supports. Had issues with zig zag supports, switched to lines (~1.5 - 2mm gaps), running horizontal to the front face of the…
Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.
Travel Case - Philips 7000 Trimmer Description A simple, strong and easy to assemble travel case for 7000 Philips trimer (I used MG7715/65 to model) that can be modified for your preferences of the attachments you use the most. This case…
The model was designed for the Philips MultiGroom 7000 (MG7720), but you can adapt the inlays to any model. It uses the Gridfinity design to ensure modularity, so you can take the essentials with you and save space while travelling. My…
A remix of my original design from years ago Holder / Organizer for a Philips Norelco 7000 series shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all and it's frustrating to dig through and find the…
I was really tired of having to sort through the included bag for specific guards, trimmer sizes, etc, so I designed a set of Gridfinity bins to simplify my life. As someone who has to shave their head frequently, this has definitely made…
This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…
Model to support the Philips 7000 Multigroom. Can be printed face up with no supports and default settings with any material.
Powerbank built on STEP UP 5V 2A Li-ion USB-C and 2x lion 18650 3.6V batteries and with LEDs indicating the level of charge on the side of the case. needed: - STEP UP 5V 2A Li-ion USB-C https://pl.aliexpress.com/item/1005003104542176.html…
Designed a wall mount to fit the Dell Optiplex Micro PC that I recently got. My network setup is pretty limited where I live, and having space to run everything I want is even more limited. The only wired internet I can currently run is…
I've always needed a solution for my Philips 7000 series groomer to put everything in it, since my model comes with 15 different accessories I had to design one, also If I can solve charging while docking, that would be amazing. So I…
This model consists of three parts: case body, lid and lightguides. BOM The following items are needed for one case: 1x printed body 1 x printed lid 2x lightguides 2x M4x10 hexagon socket head cap screw(DIN 912) 1x SP11 Panel Mount…
Compact holder for Philips 7000 and some accessories.
Adapter für die Oberfräse Makita PJ7000 zu Festool D27 Schlauchanschluss. Ersetzt den vorhandenen Adapter.
I remixed the adapter from @gwendal ( https://www.printables.com/model/68024-pj7000-festool-adapter ) since his was not properly working with my Festool Cleantec.
Here is a collection of 3.5 inch bezels for the old Macs that use the “outrigger” case (Power Macintosh 7200, 7300, 7500, 7600 and Power Macintosh G3 Desktop). I have found it's easiest to print on either side using supports, and tree…
Optimized for FDM 3D printing with no supports needed! After many, many iterations (like 5-6 for each clip type), I managed to create minimalistic clips that can hold all of the blade guards in this Multigroom 7000 kit, and likely other…
This is a base that will hold the current Philips 7000 series 15 in 1 trimmer available on Amazon etc. https://www.amazon.co.uk/Philips-7000-Trimmer-Multigroom-0-5-20/dp/B0CG6TB95V Model MG7950/15 It has space for all of the different…
Mixer (Blender) Philips Series 7000 HR3760 base ring The base ring that holds the rotating blades is very weak and breaks on multiple places over time. Philips service centre only sells the plastic part with a brand new blade for about…
Just a quick adapter to use with a standard festool hose. Works perfectly fine and has a snug fit. Category: DIY
This simple fence makes it easier to use the Makita Biscuit joiner vertically. It simply bolts into some factory holes at the rear of the bottom sole. There are two small inserts that prevent some M6 nuts from spinning inside of the case.…
A phillips 7000 series shaver stand. One day i'll make one with a usb magnetic charger. Till that day this will stand. This seems to be the first of its kind for this “7000 series” shaver. prior generations were “series 7000” so a little…
This is a tray designed to hold a Philips 7000 trimmer and its accessories. It has a 40mm gridfinity style base. I have included a range of compatible base grids for use with it.
Print: 1.2mm - Wall thickness 5% - Infill (cubic or honeycomb) PLA With this settings you will get weight close to original handle ~27g 2. I used epoxy to attach handle to the rest 3. Wrap it 4. Post your make 5. Play! Your logo or name:…
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
The design is chosen so that it fits on the standard Prusa printing plate. No support structures are required. I do not like to drill the tiles in the bathroom so I did not place any holes for drilling. My recommendation is a good…
This bracket can mount the IC-706 series of radio into a havis public safety type console The radio mounting screws are countersunk M4x0.7 - 8mm depth I highly recommend printing this in Nylon (PA) if you are planning on using it in a…
This is a organizer and storage box for a 19 pieces Philips 7000 series hair cutter and it's accessories. It's designed to be printed in PETG. The walls may be to thin and the screw hole to fragile for PLA - but you can try. You need two…
Long hair trimmer clipper comb for the Philips Hair Clipper Series 7000 Model HC7650/15. Recommended material: PETG (flexible and durable). Trimm away!
This is a lens cap for the AKASO EK7000 4K action cam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .15 Infill: 20% Category: Camera
Filter replacement for respirator using cosmetics cotton discs. Print instructions layer 0.1 PLA temp 218C
I created this adapter version because my previous design was too weak and snapped when printed vertically on my FDM printer. This version is meant to be printed horizontally, which results in a much stronger adapter when printed on FDM…
This 3DW osVAC Adapter for Makita DPJ180 /PJ7000 replaces the original hose connector. You must transfer the o-ring of the original adapter to this osvac adapter. Lubricate the adapter with a little grease and insert it. In the pictures…
made to suit Philips shaver/groomer alike others will work with a lot of these types of shavers ….Remember you don't really use all those guards…… print settings .3 layer 3 walls 10 % infill
Hi, this is the first model I created from scratch by myself and I'm proud of it. It holds your Philips MultiGroom 7000 Series with its accessories organized in a drawer (I prefer to have it in an enclosed space so it will not get so…
This model flexes in to place around the body of a Philips 7000 (designed for 7750) and prevents the button from being pressed accidentally. Especially useful if the razor will be packed in a bag. Print with PETG for flexibility, brim may…
Cover for the channel and volume knob to prevent accidental channel or volume changes in the field. This should be printed in TPU or other flex material because the volume knob has an undercut to ensure the cover does not come off…
AMD Radeon RX 7000 series PCI/PCI-E slot covers with extruded model names. Simple easy to print slot covers with various model names/numbers raised from the surface of the slot cover. Why have boring, plain, generic PCI/PCI-E slot covers…
A box for Philips 7000, that fits all pieces that come with the shaver.
Case for Akaso EK 7000 (also works with cameras with dimensions high 41mm, deep 27mm, lenght 59mm) This print turns out better if you print this with TPU! by problems please write a command or contact me via E-Mail…
Most available models incorporate the charger, which is not what I wanted as the brush has very good battery life. I have only tested this with 5300, but believe it would work with 5000 / 6000 / 7000 series brushes. Designed to be…
A replacement battery holder for the Minolta 7000 that brings it into the rechargable age. Full build instructions available here. http://dev-with-alex.blogspot.com/2016/05/minolta-7000-battery-upgrade.html Category: Camera
Beard Trimmer Organizer for Philips Multigroom 7000, compatible with other models like the Multigroom 3000 and 5000 that use the same trimming guards. Features snap-in stands to securely hold the guards in place. Printed with a 0.2mm…
A mount for the cheap Akaso EK7000 action camera sold by Amazon. I made this to attach the camera to a FPV drone. Designed to be printed in 95A TPU or similar. FreeCAD model file included.
Front tank bracket for Honda XLR XLS 125 1979-1990 Honda Original part Honda: 17611437000 Printing in TPU - PETG - ASA 100% infill
A 3D-printed case that houses the Digilent Zybo Zynq-7000 development board. This remix removes the fan hole in the “screen” section and adds deeper holes for M3x10 screws. (It is possible to drill the “case” holes to insert nuts secured…
Ersatzteil Lüfterrad für Scheppach Wippkreissäge WKS7000 evt den Sitz für die Welle mit einer Feile etwas nachbearbeiten
This is a little bumper for the viewfinder. I don't know if Minolta ever made an official version of this but I tried to keep it in the angular 80's futurism style of the camera. Category: Camera
Kryt baterie určitého typu myši a jim podobné.
This is a stronger/larger roll cage or rail set for the IC-706 and IC-7000. It extends to the rear to protect the RF connectors. The frame is 1cm x 1cm square. The mounting holes are sized for M4 SHCSs.
Replacement for Subaru manual transmission special tool number 498937000. Designed to be used as a clamp to lock the main shaft in a vice to torque down the lock nut. Printed this in ABS on my Ender 3 with no issues. The fit is snug on…
Hello Everyone, I hope you are all doing well! I am happy to share with you all the complete model assembly of this sleek and compact travel case for your Philips Norelco Series 7000 and newer. This case will allow the user to store the…
Stand for Philips Hairclipper series 5000 & 7000. Includes slot for unused comb attachment on back. No support structures required for printing. Ständer für Philips Haarschneidemaschinen der Serien 5000 und 7000. Mit Aussparung für…
very easy to print supports not needed infill 20%
I wanted to get my trimmer off the countertop and keep it mounted to the wall. This was designed to stick to the wall with foam tape, or a 3M command strip. I recommend printing with the “arms” flat on the build plate. If you print with…
A protective case for the CED7000 Shot timer with the silicone skin . I have a lot of crap in my range bag, and I wanted something to protect the screen of the timer, as well as eliminating the possibility of it accidentaly turning on in…
mostly every owner of a makita pj7000 knows the problem with the vac hose connection - it doesn't fit to most european vac models. So i made this part here, just open the lid like for changing the sawblade and pull out the adapter. You…
3D-printed organizer is designed to fit Philips Bodygroom 7000 and included charger created to work with Gridfinity by Zack Freedman . The base model was created in Fusion using using Lev Mishin's GridfinityGenerator . The model is 9U…
Printed in PETG with 0.2 mm nozzle. Tested for ca 1500 km with no problems. The fit might be a bit tight and require some sanding on the axle, depending on the printer.
Print settings Layer thickness -1mm Thickness of 1st layer -2mm 7% hexagonal filling Suspension of the print at the 13th millimeter and insertion of the rubber seal, see photo. Other defalut settings
Just needed something sturdy to hold stationary on a tripod. Holds Akaso EK7000 for goPro mount.
Exhaust adapter for Activejet KPS-7000APP portable ac. It fits 130mm hose which screws onto the 3D printed part.
Print, add two 18mm disc magnets (under 2mm thick) with cyano glue and you are go!
Holder of beard trimmer clips
Vacuum Adapter: Makita Biscuit Jointer to Bosch Click and Clean System. You will need an O-ring with a 25 mm ID and a thickness of 1.5 mm, which belongs in the smaller groove. To print a nice, sharp bottom surface for the inner lip, I…
I dropped my original metabo 626697000 bit box. The lid crashed and the box itself cracked, so I needed a replacement. And thanks to the FANTASTIC paramatric rougged box (v2) here we go :) Warning: I am not skilled in 3d design. I just…
Change: Added logo to lid This is a multibody file, you'll need to select the logo and convert it to a "modifier" and change the color of it. Recommended to use with lever latch with locking system to prevent the lid to open unintentionally
VESA 100 mount for a Netgear R7000 router. Enables mounting router on back of LCD Monitor. Saves desk space. I swapped out the router middle antennae with an remote/extension wired antennae, so the middle antennae wasn't in the way of the…
TTGO T-PCIE with SIM7000G module: I was not able to find any CAD models for these two lilygo modules so I created my own. I had to measure everything myself which might have caused some inaccuracies in the placement of the components or…
Corsair 7000D Case Door pannel clip replacement May fit 4000D and 5000D cases too but I can't confirm since I don't have those cases.
As someone who has been grappling with chronic SI joint issues that constantly pinch my sciatic nerve, causing debilitating pain, I've found that traditional medical interventions have been largely ineffective. The only treatment doctors…
An AR7000 Spektrum receiver will snuggly fit in this holder. There is also a backer plate and a snap on band. With the servo extensions attached the edges are held by the holder. I will post photos soon. I listed it as work in progress…
Printing of this part is very simple. It can be done in basically any material. It is tested in Prusament PLA azure blue, but PETG should work fine as well. No supports are needed if the part is printed in the uploaded orientation. Number…
Created a tank key for IDO Seven D toilets. Fits to the toilet's two sided flush button and opens the rod that needs to be remove before opening the tank. Has a 15mm hex, with a bit holder at the bottom. IDO Z6205700001 IDO 5731280 WC…
As first seen on my Instagram page . This tool threads into the crank axle to secure the Park Tool LRT-2 (or similar) e-bike chainring lockring tool into place. The back of the tool is sized to match the Park Tool's 36mm hex profile to…
I lost the battery cover for one of the Tens 7000 tens units in the house and wanted something to keep the 9V from falling out when it was in use so I took one of the covers I still had and re created it so now I have infinite covers this…
Vacuum adapter to connect a Kärcher WD6 with a Makita PJ7000
Držák pro kameru MiVue m700 na přilbu dräger HPS 7000 který zapadne do adapteru pro svítilny ADALIT a PELI. Univerzál pro levou i pravou stranu, nevadí kandaharu - pěkný záběr i pro nasazené masce. Doporučeno: 5 perimetrů.
My Design of a simple but fashionable stand for your Philips Multigroom Series 7000. The Trimmer fits perfectly inside. Since the print uses a minimum of Filament and time it is a bit lightweight. Because of this I added a hole with a…
This connector is made for hoisting a matching unit to the top of a Tactical 7000 mast. It is modeled after https://www.sotabeams.co.uk/versatile-top-antenna-insulators-5-pack/
Common item to break on these great but older radios. I suggest SLA but I'm sure this can be done on FDM, as well.
I made this hook to remplace the original broked. It fonctions very well. Print it slowly ( 30mm/s) in ABS or ASA with supports. if you find that it moves once in place, you can scale it up a little bit.
Damit das Gehäuse im Bereich der Linse geschüztz ist, habe ich eine Schutzkappe aus TPU entworfen. Wie immer, ist auch diesmal die Fusion360 Datei mit dabei. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Filament:…
"Lockpin" for dethleffs habitation door lock' Gasket for the outside, best to print with TPU The lockpin can be printed with PLA If the lock pin is too tight, just use a sandpaper and sand it a little. There are 2 files, one with a inner…
I used Gardena 7000/D a few years ago and I stopped using it because its plastic parts had very low quality. First I broke 3 of 5 pins that are used to keep the blue and the black parts of the pump together. I used a metal wire winded…
Customized version of http://www.thingiverse.com/thing:348618 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=348618 Instructions Using the following options: hard_case = 0 thick_edge = 0 hole_distance =…
I wanted a Gridfinity all in one beard trimmer station compatible with Philips Norelco 3000 5000 and 7000. I found an existing model and added sections for a Gillette razor and my Henson razor. 3x6 Gridfinity base
Protective (in theory?) carrier for AMD SP6 socketed chips. There is slightly excessive slop on the bottom half, could probably benefit from a few millimeters added back. How do the two halves connect? you might ask, well, use some tape.
This model provides replacement front parts for TEKTRONIX 7000-Series Plug-In Extender tray (067-0589-00 Calibration Fixture). These plastic components are prone to breaking over time due to material aging, making these replacement parts…
Compact travel case designed for Philips Sonicare 6000 and 7000 series toothbrushes , featuring vent holes for airflow and drying , a snap-fit lid , and a hinged design to keep the toothbrush securely contained while traveling. The case…
Abstandhalter um das Problem mit nachlassender Saugwirkung bei den GAS 35 Modellen von Bosch zu beheben. Ja nach Verschleiß am Ventilteller 1607000F50 Bauteilhöhe anpassen, bei mit war 1 Millimeter ausreichend. Einbaupositon Bild 3 in…
Zynq 7000 casing with storage space as needed. This version uses threaded inserts to securely hold the case together.
Simple wall mount for the accesories that came with my new vacuumcleaner. The accesories snap onto the mounts for safe fit and are easy to remove. I mounted them with 4*30 screws on a wooden board.
I was missing one of the two tank cushions, printed in TPU. It is a replacement for 17611-437-000. It should fit a lot of old Honda's including: nx250 atc250 nsr50 xls125 + more.
![osVAC Adapter M32-PJ7000 [sturdy] (Makita Biscuit Jointer)](https://media.printables.com/media/prints/649299/images/5122850_088a5448-cb3a-47f0-bc84-bf35238d01c5_b376caa5-0f1c-4a82-ade1-6fa5bc543378/osvac_makita_pj7000_split_01.jpg)
