Liczymy pasujące modele…
Simple attachment for the Dewalt 735 to get a 4"/100mm hose up and out of the way of boards exiting the rear of the planer! Simply push in the button on the stock port, rotate and remove the original stock black port. Install this…
A 90° degree transition from the Dewalt DW735 dust collection port to 4". Here I'm using a Rockler quick connect but it'll also work fine with a 4" flex hose and it may work with various other fittings but I haven't verified this. The…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Sorry, but due to the license being completely disregarded and copies being sold, I've removed the STL's. However, I do have it for sale on my official shop (along with 4" versions) https://www.etsy.com/shop/LayneAndSonWW
I Increased the depth of the screw head counterbore by 6mm and the diameter of both the counterbore and the through hole by about 0.5mm. This lets the factory bolt bottom out on the shoulder as it should (i.e. don't have to worry about…
This is a 90-deg elbow that fits onto the exhaust port of a Dewalt DW735 Planer and allows you connect to a standard shop-vac hose. It can easily be printed with no supports and has tapered ends for a snug fit on both ends.
A collection on well fitting vacuum hose adapters for the Dewalt DW735 planer. I have this planer and designed the adapters to provide a snug fit similar to that of the factor adapter. Adapters that have a bend have 4 retaining position…
Printed with Prusament PETG Jet Black 0.2mm support is required on the bottom piece.
A dust port compatible with the Dewalt DW735 planer.
This adapter snaps onto the output dust port on the DW 735 planer and connects to a vacuum hose with the output angled up and sideways so that the hose doesn't drape down over the outfeeding workpiece. The OpenSCAD file is parameterized…
This is a wall mount for a TP-Link M7350 hotspot. i use it in the camper. It can be screwed or glued as in my case. Please check beforehand if you have a suitable USB cable. Dies ist eine Wandhalterung für einen TP-Link M7350 Hotspot. ich…
I made this to contain a 1.8"TFT screen ST7735 and attach it to a project box which contained an Arduino. The template allowed me to precisely cut out the holes for the cables and the screws to hold it in place and then seal the main box…
Description The Dewalt DW735 generates such a heavy chipload that the manual recommends it NOT be hooked to a ShopVac. This set of models lets you convert a 20 gal. Rubbermaid Roughneck refuse container into a chip and dust holder. Parts…
This model is compatible with the lego system.
Simple funnel to connect Dewalt dw735 to 35 mm/ 40 mm shopvac. Outer diameter is 40 mm Inner diameter is 35 mm PETG recomended, or as you wish
This model is compatible with the lego system.
Just an adapter for using a standard shop vac.
This enclosure is made for a ST7735 TFT display module controlled by an ESP32-S2 mini. Wires have to be soldered because there aint much space inside and wont close if used with dupont connectors and headers. External screws are not…
Holder for TP M7350 4G Router. Designed to be fixed to a window (or wall) with double sided tape.
This is a case I made to house my ST7735 Displays. It snaps together requiring no glue and I used breadboard jumpers to expose the pins since they were so short on the part. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts:…
FORD RANGER T6 MK1 Load Space Liner Cover 1735767, small black plastic cover cap designed for the exterior side walls of the cargo bed on Ford Ranger. This snap-on cover conceals the two mounting bolt heads of the bed side tie-down…
Simple handle replacement for the DeWalt DW735 Planer/Thicknesser. Few others around to download but couldn't find one that “felt” right so I designed my own! Uses stock bolt, I do recommend a washer between the handle and the round body,…
I changed the height to create enough space for the relatively large ESP32 with the pin strip I also enlarged the hole on the side for the micro USB port i use this ESP32 - AMAZON LINK
Replacement dust port adapter for the Dewalt DW735 thickness planer. This has a sturdier design around the fixed pin, per the original model, vs. the OEM adapter which is prone to breaking. It is made to accept 2.5" dust hoses. The…
Ramka do montażu z modułem wyświetlacza LCD SPI TFT 1,8 cala ST7735 (1.8 TFT SPI 128*160 V1.1 - czerwone pcb).
I design a compact case for the DISPLAY ST7735S 0.96" 80x160. It includes cutouts for pins and it has guillotine closure. Be sure to have the same model otherwise it doesn't fit as well as you see in the picture. If you need help or you…
A replacement cap for the posts on a Dewalt DW735 thickness planer. There are two versions: One is a close replica of the original part with a domed top. This one will require support in the center section. The other is slightly different…
This is the car part number 735373420 Print instructions Category: Automotive Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: Prusa PETG Black
This is an adapter to connect my DW735 planer to my shop dust collection system. The supplied adapter with the DW735 has the collection system hose in line with wood exiting the planer. This adapter permits use of a right angle hose…
lego 4215 59349 23405 98280 30022 87421 47847 6082 64453 65735
Upgrade your DeWalt planer with this space-saving, ergonomic adjustment knob. Designed for tighter workspaces, it offers a lower profile without sacrificing grip or control. The contoured handle improves comfort and precision, making…
A case I designed for my HomeAutomation server based on Raspberry Pi 3B. The case is for: Raspberry Pi 3B Geekworm x820 Storage board v3.0: https://wiki.geekworm.com/X820 Geekworm x735 Power Management shield v3.0:…
This is a simple stand for NodeMCU and a TFT ST7735. I'm learning to use FreeCAD, this is the first object that I drew alone.
Replacement for Thetford camper WC. I tested on my C250 , should be also compatbile with C260 . The two upper walls are more thick than the original to ensure better strenght. Version history 2024/05/09 - Version 1.0 - First public…
A combined wire manager and outfeed table holder for the DeWalt DW725 planer. Hardware: (4) M5x12 bolts (2) M5x20 bolts
This is a replacement for the stock dust collection adapter for the Dewalt DW735 thickness planer. It is designed to work with Rockler's Dust Right 4" hose system. It features a reinforced locking groove, so it won't crack like the OEM…
Flügelmutter für die Rücklichter des Dodge Challengers 2015 Artikelnummer 6507357AA Gedruckt in PETG mit 4 Wänden
Without support the hose falls on the the outfeed table and gets in the way of the wood being fed out of the thicknesser. I have designed mine to fit on the RHS of the machine using existing screw holes. You need to source 2 screws 10mm…
Broke one of the long red T bolts on my planer when a knot broke loose, replacements are ridiculously priced! it's a standard M5 thread so I designed my own replacement. Prints on side for better layer structure/strength Only need a 30mm…
This is a 4" hose adapter for the DeWalt DW735 13" planer. It directs the hose 45 degrees to the left or right of the planer to keep the hose out of the way. I wend with a 45 degree angle to avoid needing supports. There is a left and…
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
I printed this with default settings on a Prusa i3. I had to rotate to fit the surface. Gently poke hole into shaft to c
This is a remix of the Dewalt Tough System 2.0 Nesting Cup by aclmnts https://www.thingiverse.com/thing:4717350 Change : Transformed the 4 compartiments in a 3 compartiments (1 long, 2 small) Added a 1"1/2 tag Added a rounded bottom for…
This is a Thien Baffle Bin Nozzle / 4" Hose Attachment, inspired from this Video: https://youtu.be/h7oWNcIwr7E This 3D print enables you to easily attach a 4" hose to your dust collection system. It was inspired by the Youtube video link…
I broke the watch strap clip on an aftermarket silicone band on my Garmin and it was annoying sliding the thing under the inside of my wrist so I printed a replacement one based upon the geometry of the band itself (not the old clip).…
Installation tool (drift) for tapping the cutterhead into the DeWalt 735 and 735X planers. It fits both the stock cutterhead or the Byrd Shelix cutterhead. It is designed to use with a mallet to tap the cutterhead into the planer.…
Connector between the exhaust of the Dewalt 735 Planer to the Black&Decker leaf collection system . Wood chips are neatly collected in a trash can.
You have to adjust the width to your wrist diameter. That's why I also uploaded the .step files
0,1 layer 100% infill density PETG The pin is raw PETG filament now you can use with this mount: https://www.printables.com/model/410218-forerunner-235-garmin-edge-bike-mount
This is a straight adapter to connect a 36mm "large size" Festool extractor hose to a DW735 planer directly, replacing the factory hose adapter by using the same spring-pin attachment as the factory adapter. Output is straight, just like…
This is an angled adapter to connect a 36mm "large size" Festool extractor hose to a DW735 planer directly, replacing the factory hose adapter by using the same spring-pin attachment as the factory adapter. Output is angled down and out,…
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
Philips Multigroom Accessory Caddy Model MG7735 + Accesories slot
This is an alternitive screw plug for the Versys 650 92066-0735, it should also be compatiable with the 2012 EX250KCF. I made this to replace two broken ones that I have on my Givi top box mount that I have recently refurbished. I…
Slip-on fit for DW735 planner for dust collection with 3/8 x 1/4 magnets and 2.5-inch anti-static hose
This is a copy of the hood prop rod clip from my Fiat 500 Abarth. Mopar Part# 68073578AA. Print out of something like ASA, which is semi flexible and can withstand the under-hood temps.
I needed an easy way to keep a USB charger near my camera when it's on a tripod so I can keep it charged while doing longer video shoots or timelapses. I found that the 65w Anker 735 was a nice little charging cube that allows to for…
The original MK735 off MFF was deleted and the creator went dark. I have recreated the hard drive rails for the MK735 3D printed NAS. These are not perfectly recreated but will work pretty well in that case.
Original closing bracket broke. This is biased on original size, but I might add version with hook extended by 3-5mm later. PET-G might be better for this (temperature), but PLA worked well.
This is an option to mount the WaveShare 5" DSI Display and a PI4 with a X735 shield ( https://geekworm.com/products/raspberry-pi-x735-safe-shutdown-auto-cooling-expansion-board ) onto the Prusa-Box from https://www.printer-box.com . Add…
Compact Travel Case for Anker 735 Charger (Nano II 65W) I’m excited to share my latest project: a travel case for the Anker 735 Charger (Nano II 65W) ! The case is made up of two parts: Inner section : Designed to be printed in TPU,…
Case to ST7735 TFT 1.8" 168x120 Display I printed on Creality K1 with basic settings for generic PLA - No supports needed. On Fusion360 file, there is an sketch where you can put your logo.svg, and extrude as you wish.
Update: I have given up on this model 👎. See my own alternative solution here . There is too much stress on the slot making it fragile and easy to break when printed in PLA or PETG. I can see the use of these angled designs if you have…
https://www.youtube.com/shorts/AV2I88nhYOQ PCB: https://www.pcbway.com/project/shareproject/Raspberry_PICO_Nixie_Clock_Lcd_f3d1c4a8.html Please follow my YouTube channel. Still a newbie to make a YouTube channel. Just press Subscribe my…
These supports, right and left, are for tiny servos Protronik 7350 MG-D in a rc plane, ASW15 from Silencemodel, http://silencemodel.fr/product.php?id_product=1274 . Total weight is 2,4g Print Settings Printer: Mini Fabrikator 2 Rafts: No…
The Anker735 has power management. In this case, it is necessary to unplug some USB cables to reach e.g. 65 watts. Also the unused cables got taggled in my Roborock all the time. This little thing helps keep them organized. Normaly at…
This design, while not without its imperfections, was the result of a rapid, collaborative effort, completed in approximately 30 minutes, and was necessitated by the failure of the existing crank wheel. The components utilized include…
This STL file contains a 3D model of an acoustic deflector designed for the internal speaker of the Icom IC-735 transceiver. The purpose of the deflector is to improve sound dispersion, reduce direct high-frequency beaming, and minimize…
This project is a compact 3D-printed powerbank enclosure designed for a very affordable and surprisingly powerful DIY build. The case consists of: Battery box (holds the cells tightly, no glue required) Lid (for the charging module)…
Heltec LoRa 32 17350 battery holder
raspberry PICO connect LCD ST7735 Write a program to create gif animations. for title when start power https://www.youtube.com/shorts/ZYoVWjcuEP0 https://www.youtube.com/shorts/BY0bHymZJgY https://www.youtube.com/shorts/bl2Z6cd0u28 PCB:…
This is a simple holder designed to store a 17350 Li-ion battery . It keeps the battery secure and prevents it from rolling around on your desk or workbench. Perfect for electronics projects, battery storage, or organizing spare…
Beefed up a little bit, added a bit of length for machines that have a custom outlet and added a recess for screw head
remixed based on Fuzzino's file https://www.printables.com/model/1279036-dewalt-dw735-bag-adapter-stand-mount/files
Replacement dust port adapter for the Dewalt DW735 thickness planer. This has a sturdier design around the fixed pin. It is made to accept 100mm dust hoses. No threading - use a clamp. My first test using PLA actually fitted (!) so I'm…
I didn't realize how few mounting locations there would be for a radio in a manual single cab truck that doesn't take up valuable storage space, so I found that I could remote the radio under the passenger seat and mount the faceplate…
27W PD QC Fast Charge Module USB Type-C Dual Interface Quick Charging PD2.0/PD3.0 QC2.0/3.0 FCP SCP For Apple Huawei Samsung Case Housing Enclosure…
Dewalt Planer Exhaust Adapter (DW735) to Dust Extractor / Shop vacuum Designed with crush ribs to create slight interference fit between planer exhaust and adapter. Designed to connect to 90 degree elbow on Home Depot Dustopper.
I havent seen any cover anywhere so I made my own. I recommnet printing it in PETG but PLA is ok too. You will also need two headpandes or somethink like that so it doesnt move too much.
I haven't seen a new-style Baratza coffee grinder gasket so I whipped this up. Directly modeled after the Baratza gasket. I have an Encore and it fits perfectly into the burr holder and over the hopper outlet. I have not tested it on…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Beefed up a little bit, added a bit of length for machines that have a custom outlet and added a recess for screw head
A combined wire manager and outfeed table holder for the DeWalt DW725 planer. Hardware: (4) M5x12 bolts (2) M5x20 bolts
This model is compatible with the lego system.
This STL file contains a 3D model of an acoustic deflector designed for the internal speaker of the Icom IC-735 transceiver. The purpose of the deflector is to improve sound dispersion, reduce direct high-frequency beaming, and minimize…
This is a simple holder designed to store a 17350 Li-ion battery . It keeps the battery secure and prevents it from rolling around on your desk or workbench. Perfect for electronics projects, battery storage, or organizing spare…
Sorry, but due to the license being completely disregarded and copies being sold, I've removed the STL's. However, I do have it for sale on my official shop (along with 4" versions) https://www.etsy.com/shop/LayneAndSonWW
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
Product Description This download contains the latest updates for our aftermarket upgrade for the DeWALT DW735 planer , designed to modify the machine’s factory dust extraction method to an over-the-top dust collection system . Now…
This model is compatible with the lego system.
Broke my front bumper, so I attempted to design a copy. Category: R/C Vehicles
I needed a way to keep the bag and dust hose in place on my DW735s mobile stand. No one had a 2.5 inch wall mount with an angled 4 inch bag adapter, not without needing several different items anyway. This will take 2.5 inch dust…
This model is compatible with the lego system.
Every commercially available DW735 is just a DRO with a customized bracket to fit with DW735. So here is a bracket I designed that should work with this Generic DRO You will also need Assorted Metric Screw and Nuts . Installation Steps:…
This part replaces the stock Dewalt 735 mount with one that includes both a 45-degree elbow and a 100mm magnetic dust collection mount. The upgrade solves two problems. First, the dust port is directly above the outfeed table which can…
I wanted vertical dust collection for my DW735, but didn't want to pay whatever silly money people are asking for their model. It may not be perfect, but its free. I included the fusion file, please feel free to edit and do whatever you…
This model is compatible with the lego system.
My Modified Re-Mix of the case for the ESP32 SI4735 all band radio from JasonKits
DW735 height adjustment handle shortened to the minimum length supported by the factory shouldered bolt.
This cup holder insert was designed to fit a 2016 Chevy Silverado cup holder. May fit other sizes / years etc. The bracket with the pivot was designed with a taper so it friction fits into the cup holder insert. This way the cup holder…
