Liczymy pasujące modele…
Side buttons and dpi button is usable with this model. Works for me. Must thank original model author for providing good base model.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
8040 extrusion cockpit mount for SimJack Control box. You can print just 1 but 2 work better.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Changed to fit tp-link UH720 with charging ports on the side
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
8040 Sim rig - Nautilus Hey, here you can find plans to make your own sim rig! Why you should not do it? You need to gather all the material yourself It is lot of work You will not save much money Something will go wrong Why you should do…
⚫ Zetor Crystal 8045 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts 26 black by MrHanjak…
Sim Rig - MOZA Racing Wheel Mount - 8040 Profile Ever felt like your additional racing wheel was just lying around and always rolling away? Well, with this holder, your extra MOZA Racing Wheel gets its own VIP spot on any 8040 profile!…
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
Sim Rig - Headphone holder - 8040 Profile This headphone holder is a masterpiece of simplicity. Its sole purpose is to hold your headphones. Features: Holds your headphones. Mounts to a vertical 8040 profile or to any horizontal XX40…
⚫ Tire and Wheels UPDATE ⚫ I don't like interfering with an already released model. Therefore, this update is standalone. If you choose to print this update, don't print these parts at zetor 8045/8145 Zetor 8045:…
ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…
Slim casing for Nextion 7 inch NX8048T070. Designed for wall hanging.
Simple end cap that clips into place on an 80x40mm aluminum extrusion. I printed this with 0.28 layer height and 0.6 line width in PETG.
Converts a 1xSSD (or any 2.5") mount into a 6xSSD bracket, with multiple mounting options. If your case has 4 screw holes used to mount an SSD (flat orientation), this bracket should work for you. Multiple mounting options: Flat…
Quick upload of my first prototype headset holder for a 8040 aluminum sim racing rig A lot of things can be improved still; Better snap fit mechanism to secure the holder on the bracket Better printing optimization/orientation to minimize…
Like the original, but faceplate with rounded corners and even frame width
Quick upload of my first prototype bottle holder for a 8040 aluminum sim racing rig A lot of things can be improved still; Better snap fit mechanism to secure the holder on the bracket Better printing optimization/orientation to minimize…
I built a sim rig out of 8040 and 4040 aluminum extrusions and wanted my vacuum robot (Roborock S7) to clean below it. Therefor I designed feet in FreeCAD to raise the entire construction 10.8 cm from the ground. The corner feet are a…
This is a remix of NEON's model, but mine You can screw to side of Your 8040 simrig profile.
I printed these in 0.2mm with 20% infill
I used a little support on the inside edges. Nothing major. Common M6/M8 hardware used to assemble. One could add some felt or velcro bits to soften the surroundings but mine doesn't rattle as-is.
I picked up some scrapyard 8040 aluminum extrusion a little back and was working up some designs to use it in so I sketched it up in Fusion360. Since I couldn't find another model that was the same as mine I thought I'd post it up here…
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
8040 end cap Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: CCTREE PLA Category: DIY
Remix of the Fanatec QR1 wheel mount in order to attach it directly to an 8040 profile of your simrig
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
Aluminum extrusion based sim racing rig mount for an Apple iPad 2. This is a remix of https://www.thingiverse.com/thing:550592 . Made for 8040 extrusions with 8mm slot. Designed to be used with the M6x12 screws and T-nuts that come with…
This clamp is for a StreamDeck (MK.2) to mount it to a 8040 alu-profile on your simrig. Print this part with the big opening down on the printerbed. So you don't need any support and the clamping face will get a good fit. There is only…
English: I made this Adapter to mount my SSDs into the HDD Cages of the Fractal Design Node 804 Case. Make sure to print one copy mirrored on the X-axis. --- Deutsch: Ich habe diesen Adapter erstellt um meine SSDs in dem HDD-Käfig des…
A remix from the playseat version. Quick and dirty made because I couldn't lay it down anywhere near it where I could I could reach it. Modify it to make it better if you want. Print Settings Printer: CR6SE Rafts: No Supports: Yes…
PSU holder for Simagic EVO PRO. Mount for 8040. You need a L an R version. M6 or M8 versions. Step avaliable if you need to custom it.
Sunton ESP32S3 8048S050C 5.0" Screen Case https://www.aliexpress.com/item/1005004952694042.html I printed in PETG. All credit for the original design goes to marcusone
needed to mount the usb hub to the profiles of my simulator it's a snug fit and doesn't jiggle around. uses M5 to secure
This model is compatible with the lego system.
This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you…
So I got a Node 804 on FB marketplace, but it didn't have the Drive cages or the Rails to mount them on. I was able to print the Drive cages found HERE But unfortunately that still left a way to mount them to the case itself. Unluckily…
This is a accurate model of the LDO-42STH48-2804 NEMA 17, created based of the drawing and realworld dimensions
ENGLISH Mounting bracket for this 7 ports USB hub : https://s.click.aliexpress.com/e/_DFBW7vt ▷ Join the Patreon for exclusive content : https://www.patreon.com/lebois_eng ▷ Discord (I am often there) : https://discord.gg/UXP4KESnSE ▷…
I've made a laptop hanger for the Lenovo Legion 5 Pro sim rig, which is 31.5mm in internal size. It is compatible with any kind of aluminium sigma profile such as 4040, 8040, 8080, 12040, 16040, 16080, etc. It is a straightforward design…
A pencil/pen vase for decorative purposes to hold pens and pencils, or anything else. It is 110mm tall and 73mm wide. The photo shows the vase printed in vase mode with 3 bottom layers. It can be printed in normal mode with 0 top layers…
Simple mounting plate for the Fanatic Shifter 1.5 to mount it on aluminum profiles (80mmx40mm). But it should also work on the Shifter 1.0
Nothing that i found was quite right for my needs so i designed these Covers for the Rigol DHO804. They sit tight on my end so if your tolerances are slightly off it could be either too lose or tight. Changing the Model Size by 1-2%…
Super basic, easy to print. Just a simple hook to attach to a profile rig to hang gloves on. Doesn't need much in the way of strength, I did PETG with 10% gyro infill.
LEGO Technic Weighted Counterweight – Part 80428 (Liebherr LR 13000 - #42146) The original LEGO Technic counterweight for the Liebherr Crawler Crane LR 13000 - #42146 relies on stacking identical solid elements. While visually accurate,…
Compatible with the “Stream Dock” from AliExpress…
This model is compatible with the lego system.
3-6-2023 - Made the walls a bit more thicker because of leaks. Infill should be at 100% i think. (not tested yet) Printed these models with 16mm in PLA+. The L and the T version uses support.
Based on https://www.amazon.co.jp/Motors-Super-Power-Nema17-LDO-42STH48-2804AH/dp/B0CD1NMN5L
A relatively simple mount for attaching the power supply for a Moza R9 to the rig directly. I have a RigMetal chassis, but it should work with any standard 40 series rails. It has 4 mounting bolts to secure it on the rig, but with how it…
Best mounted on a horizontal 8040 aluminum profile extrusion Required hardware 2x M6 counter sunk screw 2x T nut
there are 2 options and 2 pdf files for the build if you want to choose wich one you like you will have to split model
it takes about 42 hours to print on my ender5 plus at 10% infill you will need to cut it in parts for smaller printers
This is a single dosing hopper designed specifically for the 804 series of grinders from Ditting. It can be used as is, or with the bellows from the DF64 grinder, available from multiple online retailers. The hopper is fixed to the…
I created this bracket to mount the power supply of the VRS DFP 15 Wheelbase to my simrig. Supports in the corner are necessary! Both sides can be identical.
The single dose conversion kit for the Ditting 804 grinder. The main objective was not to make any non-reversible changes to the grinder itself. Very effective conversion kit for this grinder, while keeping the industrial look of the…
I printed these with 0.2 layer height, 3 Wall line count and 20% infill. Original model which was remixed: https://www.printables.com/model/931879-moza-racing-wheel-mount-8040-profilesim-rig-mount
Gridfinity Magnet Baseplate for DeWALT T-Stack with 2-Shallow Drawers (DWST17804). Designed to fit in the guardrail slots of dividers. It was created with Gridfinity Workbench, which is a FreeCAD addon. Then, I added holes to fit the…
Simple Clamp for 8040 profile R9 charger.
Built a simple clip to attach LED lightstrips (Philips Hue, Govee, any variation really) to my desk, which is 4040 extrusion at its core. Clips into the extrusion via rotation locking , and light strip is held in via friction. Sizing Most…
BOM: 2 pieces M3 countersunk head screw
Canopy for the famous betaFPV HX115 HD It is made to mount a pandaRC vt5804_AIR in it. I added a Lumenier Micro AXII Shorty to it as well :-) You need some support to print it. I made mine from TPU. Happy printing and flying ;-)
HNR9804 is quite good model, but really narrow. I made these to have 195mm width, depeding on rims and setup you use. These arms also changing the wheelbase to standard 256 mm. Newer version with updated geometry can be purchased at…
A remix of @kiklhorn s Display Case I made the case symmetrical and tried to make it as basic as possible.
This model prints a “handle grip” around a 60mm x M8 bolt, enabling you to tighten the bolt with ease and without extra tools. I designed it to fit the photo head of Manfrotto 804rc2, as the original 3 screws were lost, and I didn't want…
English Atolla USB hub mount for 8040 or 4040 aluminum profile : https://cutt.ly/dHMELNr French Solution de montage pour profile alu 8040 ou 4040 : https://cutt.ly/eHME1ce Category: Video Games
This model is compatible with the lego system.
Dont mind the mismatched screws, i need to get some at the store later :) they're secured with M6's with slot nuts Fits perfect around my S5 galaxy tab
Added T-nut, for easy installation on a simrig aluminium 8040/8080/4040 frame.
Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source Standard Content Library for our 3-D printable designs, so you can focus more on your…
Wenn man am Auto,am Schaltschrank,an einer Anlage arbeitet und keinen Tisch oder ne Ablagefläche hat ,dann ist man damit gut bedient ! Mit dem richtigen Stativ kann man die Höhe und Neigung einstellen und jederzeit leicht drehen , Die…
A quick mount designed to hold sim racing button boxes which use the VESA 100 standard, to 8040 extruded profile. VESA hole pattern is slotted to allow for fine vertical adjustment. Fixings can be made to the profile on the top & bottom…
This cup holder panel mat was designed based on Ford part number 1L2Z-78046B76-AAA and should be compatible with the following vehicle models: Ford Edge: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Lincoln MKX: 2007, 2008, 2009, 2010…
It's a remix of an 8040 Sim Racing keyboard mount to fit a 4040 profile
Horse power ! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: CCTREE PLA Category: DIY
A small bracket to mount the upcoming WinWing Hornet HOTAS throttle to 8040 aluminium extrusion profiles. Based on WinWing's technical drawings from Facebook. Edit Oct 28th 2019: Verified dimensions against WinWing's 3D cockpit design…
This is a fan holder for the Motorola 68040 CPU for use in Apple Macintosh computers. This bracket is designed to hold both a Noctua NF-A4x10 fan which is a 40mm x 40mm x 10mm fan and a 40mm x 40mm x 11mm heat sink sandwiched together.…
This model is compatible with the lego system.
I needed to mount my SHH Shifter to my rig. Didn't order the bottom mount, as I wanted to place it square onto an 8040 profile. Created this handy little holders here. Printed 2, made them strong by using PETG and going ~4 perimeters, 25%…
Made some cutouts for cable management
3d scanned Mesh for the part connecting the long stick to the main vacuum. Mine had broke so i scanned it to make sleeve part around it. This is fits the Philips XC8049 that i have, as well as the XC7043 (i think). There are two meshes.…
Replacement part for the button connecting the attachments of the vacuum. This fits the Philips XC8049 that i have, as well as the XC7043 (i think). You need the original spring steel for this button to work. I tried to make the spring as…
remix to mount on a simrig, 40mm hole spacing, M8 bolts, fit 4040 or 8040 aluminium profiles Category: Hobby
I made this version to support vertical mounting of the IO Node boards from Fast Pinball. The regular version is full height, with a cut out so you can see the status and to avoid some of the surface mount components along the left edge.…
NemA с редуктором FL57STH56-2804BG100,NemA stepper motor with gearbox FL57STH56-2804BG100, 10:1 straight gear
Left and right Grips for a Beretta Cougar or Stoegar Cougar 8040F the left grip may need a little work i just printed it and the holes need moved to make a nice fit reuploaded file but have not reprinted to see if it works better. also…
Diese maßgeschneiderte Halterung für den TP-Link UH720 7-Port USB 3.0 Hub ist die ultimative Lösung für alle, die ein absolut cleanes und professionelles Setup an ihren 8040 Aluprofilen suchen. Egal ob für das Sim-Racing-Rig, den…
This is a case for the DIY clock kit YSZ-4 or ZM-804. Two versions are available: one when the display is soldered touching the PCB board and one when the display is soldered above the PCB without cutting the leads of the display. You'll…
Reinforcement sleeve for the broken part connecting the long stick to the main vacuum. Mine had broke so i scanned it to make sleeve part around it. This is fits the Philips XC8049 that i have, as well as the XC7043 (i think). You need 6…
Diese Halterung habe ich speziell für das Netzteil (PSU) der Moza R21 Ultra Wheelbase designt. Sie ermöglicht es, das Netzteil sicher und platzsparend direkt an einem 8040 Aluminiumprofil-Rig zu montieren. Die Passform ist exakt auf das…
Rail-shaped feet for 55OLED804 Philips TV series to elevated TV (above a Bose soundbar in my case) STL file made with tinkercad.com I added holes in the middle if you need to secure cables. Printed 2x in the .gcode file NB: It's my 1st…
An internal optical drive bay for the Fractal Node 804 designed to be printed on a 250 x 250 build plate. This mod replaces the mesh in the top panel so that you may mount the 5.25" optical drive bay. Designed mostly in tinkercad,…
Carcasa externa para pantalla Nextion NX8048T070 (azul)
I wanted to a stand for my ESP32-8048S070 which had the touchscreen flush with the stand without a bulky bezel, with a very sturdy durable stand whilst still looking good. All the cases and stands I found had chunky bezels and the screen…
Underwear works well to manage all the USB and power connectors on my sim racing rig.
