Liczymy pasujące modele…
Anschlussadapter zum Anschluss eines Staubsaugers / Absaugung an eine alte B&D DN840 Tischhobel. Zusätzlich zur Original sind 2 Möglichkeiten zum befewstigen z.B. durch Schrauben angebracht. Im Gegensatz zum Original ist das Staubsauger…
Wydruk około 15,94 €–19,48 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
This case is useful if you have a nice!nano or pro-micro nrf52840 board that you want to use as a keyboard dongle . The lid snaps in place. There are 2 small holes in the case which align with the leds on the supermini pro-micro.
Model approximating the budget bluetooth development board
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their…
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…
Simple case for the nRF52840 dongle devboard. The top and bottom snap together very securely but are possible to pry back open with a fingernail/screwdriver/etc. The case doesn't expose any buttons or pins but it would be trivial to add…
This is a direct replacement for the Wedco 84003 gas can vent cap. The thread pitch is 3mm and the other diameter of the male threads is approx 22mm. The plain cap should be printed with it's top touching the build surface and no…
2 pencil/pen vases to keep your favorite pens and pencils in. One has indentations going in and the other has indentations coming out. They have the same basic foot print. It is 112mm tall and 92mm for the x and y axis. The photo shows…
A component that can be placed between the two circuit boards to secure the antenna connector. I've had the connector come loose before - but with this antenna clamp, the connector is now secure and can no longer come loose accidentally.…
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures…
nologotech promicro nrf52840 https://www.nologo.tech/product/otherboard/NRF52840.html
A rounded OpenPuck case inspired by the Steam Controller Puck design. There are design options using negative space or multicolor printing along with blanks. If you haven't heard of OpenPuck it is an "opensource firmware for NRF52840 Pro…
Seeed Studio XIAO nRF52840 by Nordic carries wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best microcontroller for Bluetooth applications.…
Chevy GMC GM transmission gear shift pointer indicator part No: "7840995" It may also fit other vehicles with the same style pointer The gear pointer broke when I was replacing the lightbulb for the indicator, a new one cost $60, so I…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
This is a replacement for the Shure SRH840 headphone joints (left and right) connecting the sliding band to the speakers. Each side is two parts. Connected with a rod. And two little caps to finish it up. That way you can print the caps…
Seeed Studio XIAO nRF52840 powered by by Nordic Semiconductor's nRF52840 chipset, is carrying wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best…
A compact, 3D-printable case designed to snugly fit the nRF52840 devkit.
I am CAD Kim, the manager of the DCinside Minipc Gallery, a leading mini PC community in South Korea. You can find my channel here : Kim_CAD on YouTube . This is a full case replacement Mod Kit for the MINI PC called GenMachine. It is a…
Case for an XPT2046 LCD screen, usable in Raspberry Pi (or other) projects Hardware: 4x M3 16mm screws 4x M3 nuts
The plastic hinge broke on my pair of SRH840's, right where they pivot left/right and up/down. Instead of throwing them away, I 3d printed a replacement.
What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/64 Scale Assembly Manual: Google Docs Check out the Dragon Railway ecosystem! Join our comunity : Discord If you are happy, Buymeacoffee!! Print settings: Cura 3MF file
I've been searching for a small enclosure for the nRF52840 kit. Seeed has a designed enclosure for the Esp32 variant, but it doesn't seem to work for the nRF52840 kit. So--- Introducing my micro meshtastic node. It is one of the most…
Stepper Motori. Serie 17HS2408 - 17HS3401 - 17HS4401 - 17HS8401 - 17HS6401. Creati con solidworks con passaggio semplificato*. per le misure complete consultare il file in allegato Step motor_datasheet.jepg Sono inclusi file solidworks…
1650 840 Freight Bogie - Dragon Railway Freight Bogie 1650 840 1/64 Scale Assembly Manual: Google Docs Check out the Dragon Railway ecosystem! Join our comunity : Discord If you are happy, Buymeacoffee!! Print settings: Cura 3MF file
Wall mount for the 20V DCF840 DeWalt Impact Driver. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. See the following link for a similar mount…
Seeed Studio XIAO nRF52840 Plus, powered by Nordic chipset with FPU, brings more SMD pins to our popular Bluetooth-enabled board. While maintaining all the capabilities of the standard version including Bluetooth 5.0, NFC, and low power…
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
This model is compatible with the lego system.
derivat of case for the Nordic Semiconductor nRF52840 Bluetooth Dongle
I wanted a case that used standard 18650 batteries for my Xiao NRF kits that also had a power switch. You'll need some switches like these (2MM): https://www.aliexpress.com/item/1005005531658132.html Battery terminals like these:…
A base mount to design a case around for the XIAO nRF52840 & Wio-SX1262 kit. No screws or glue needed, the kit just clips in place. Enjoy!
Mount the Ridgid charger version R840095 to a wall - used @Abomb 's advice and printed on the side with tree supports.
I needed a way to scan 126 cinematic film, which has the same film height as a 35mm film, but the image area is taller than the one in 35mm film and the frame has a square aspect ratio. I own a Minolta Dimage Dual III AF-2840 scanner and…
This Slim case for a (directly soldered) XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo. To increase the visibility of the status LED, stick a short piece of transparent filament in the bigger of the two holes and trim it flush.…
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/32 Scale Assembly Manual: Google docs Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!!
Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…
1650 840 Freight Bogie - Dragon Railway Freight Bogie 1650 840 1/32 Scale Assembly Manual: Google docs Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!!
A minimalist case for the XIAO nRF52840 & Wio-SX1262 kit. It is designed to be small and portable using the internal antenna. It is designed for a 650mAh 18350 battery, which is enough to power this hardware for several days using…
An enclosure for PAM8403-based tiny audio amplifier board that can be purchased from online stores like [Sainsmart] . There are two versions with or without vents. This STL model has been optimized for Hatchbox Wood PLA. For different…
Replacement for a broken K-Edge Mount
Created this model as I was not happy with the other designs I saw online and here. Fits the Seeed Studio XIAO nRF52840. To be used as a dongle for a keyboard I am building. Comes with a hole for reset. Might add a hole for lights but for…
This is a 3d printed case for the Openpuck project. I wanted a dongle similar to the Mayflash ones so that I could easily use my Steam controller with my Jailbroken PS5 and my Ghostcontrol project The OpenPuck project allows a Pro Micro…
This is a model of the Eufy Indoor Cam 2K. The purpose of this model is to allow others to import and reference it for their designs. I tried my best to include accurate dimensions. Please comment if you notice any issues and I will…
I designed a simple snap-fit case for the XIAO 1.47-inch IPS Touch Display. The case also has space for a battery. I used a 200mAh 501530P LiPo battery to power the module, which fits inside the enclosure. You can buy the module from the…
Makerdiary sell an nRF52840 dongle for Bluetooth development. I bought one without a case, but I should have really got the one with a case. No matter, I have a 3D printer. It's best printed in white, so that the LEDs can shine through…
I modelled the original stand and then increased the area on which a cup can be placed. The optional brim is an anti-slip feature that should be carefully superglued to the top of the new stand. Print this in a food-safe material or…
A low profile tray style case for the Nordic NRF52840-DK development kit. Designed to raise the development kit high enough that the integrated CR2032 battery holder does not touch your desk. Has screw holds for 3 x M2x4 screws and nuts,…
A cover to prevent dirt, dust or small stones getting to the gears. (This is a remix of Dionarap's design.)
Only requirement is to print it out of a material that is UV resistant. No supports needed, regular settings for any functional print. It's just very slightly oversized to make it friction-fit with the layer lines but doesnt really matter…
A cover to prevent dirt, dust or small stones getting to the gears. printed with a resin printer. i don't know if it's possible with FDM printers.
Wall mount for Black&Decker STC1840EPC The wall mount is in 2 parts (one for each handle) and 3 washers. There are 3 conical washers to prevent cracking of PETG when tightening the screw
I designed and made this to get my laptop off my desk. I do not need to access it as I connect to a HP USB C Dock. The USB-C plug fits into the mount so it lines up with one of the USB-C ports. I can then slide my laptop into the mount…
I remixed the Micro Meshtastic/Meshcore Desktop Node (XIAO nRF52840) and added a 3/8" thread, allowing the node to be easily mounted on a tripod with a 3/8" mount. This addition improves placement flexibility and enables stable…
This is my 2nd Version of this part, due to ergonomic issues, the last version felt different than the original hinge and started to feel uncomfortable, so I tried to get as close to replicating them. I achieved this by changing the angle…
Seeed Studio XIAO nRF52840 Sense Plus, powered by Nordic chipset with FPU, brings more SMD pins to this tiny Bluetooth senor dev board. While maintaining all the capabilities of the standard version including onboard IMU and PDM…
I created this case for the DollaTek PAM8404 micro stereo amplifier to allow it to be mounted under a table. On the bottm there are 2 recessed holes for M3X12/16 countersink woodscrews. The lid for the case can be fixed with 4 M3X22…
Compact case for a Xiao NRF52840 + Wio SX1262 with a 2000mAh 103450 cell. There are 4 mounting options: Without switch: 1 - XiaoNRF with the original adhesive antenna. 2 - XiaoNRF with Ipex-SMA pigtail. With switch: 3 - XiaoNRF with the…
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold
Mesh node using a ASTM F2158 PVC vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit. Parts needed: -ASTM F2158 2'' PVC tube cut to 130mm + the length of your antenna -ASTM F2158 2'' PVC tube cap -6x M3 x 12mm bolts (Stainless) -2x M3 x 8mm…
I modeled the MiniPC motherboard of GenMachine. It was created by CAD Kim, an admin of the MiniPC Gallery on DC Inside
Enclosure for XIAO nRF52840 & Wio-SX1262 with 18650 Battery Holder and TP4056 USB-C Charger This enclosure is designed specifically for the Seeed Studio XIAO nRF52840 combined with the WioSX1262 LoRa module , providing a compact and…
XIAO nRF52840 & Wio SX1262 Kit with mounted antenna, 18650 battery, and a battery charger. The nRF chip is pretty jammed in there, it's a bit finicky but gets the job done. Might update the model to have stress relief lines in the lid for…
How did never played the Claw Game and lost money? This DIY project help you to build your own Claw Game. Costs will be around 500€. If you ever build a 3D printer, you can also build this. Special Thanks to Voron Design, that inspired me…
E30 (and many other chassis) plastic grommet used in the front grill installation and rear license plate.
Simple docking station for the HP Elitebook 840 G8 14" mounted in a IKEA Kallax. Splitted in multiple parts to fit in my Bambu X1 and better printability. I used this calbe to connect to an USB-C Hub. https://www.amazon.de/dp/B09J8TRLNX
Replacement rear panel/bracket for Fluke 8840a bench multi-meter. design has integrated feet on one side and can additional feet attached to the 2.5mm holes on the outer side of the part. Print instructions Printed on MK2.5s using Sunlu…
Dongle case for ProMicro / NiceNano / nRF52840 boards. Optimized for 0.2mm layer height, 0.4mm nozzle
Vertical holder for remote control, can easily be placed using screws or strong adhesive. Remote control fits perfect and can be used without taking it out of the holder, all buttons are accessible.
This is my remix of already good model by Lee. Main change is adding button to the dongle. You need small SMD button 4*4*1.5mm, as shown on photos. Just cut two legs from the one side, and solder two other legs direct to RST and GND pins…
Hey Guys, simply put there was too much dust accumulating in my printer so I decided to add a cover to it. While there are already many approaches to this topic on Thingiverse, I wanted to do my own one and of course share it with all of…
A little case for the Nordic Semiconductor nRF52 DK Development Kit. This case specifically works with the nRF52840 development kit, others might fit as well. The board should “snap” into place, it sits quite firmly in the case itself and…
Printer used: Anycubic Kobra Plus Layer height: 0.2 Supports: No Brim: recommended Raft: No
This is a remix of an excellent model shared by @void - I removed some material above the LED (cylinder shape) leaving the equivalent of 2 layers to let the light out I suggest printing with PETG @ 0.15mm Quality. I printed the first 2…
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold.
designed in FreeCAD, printed on Anycubic I3 Mega S, Cura 4.8 standard settings for TPU, flexible filament Sunlu TPU Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 15 Filament:…
Caja de 18cm x 7.5cm x 5cm
I couldn't find a case that satisfied me between gluing the lid on or a wiggly snap on lid, so I made my own to address those issues I have added a new version of the case that is slightly thicker to friction fit x2 5x2mm magnets allowing…
Caliper based 3D model of the XIAO nRF52840 & Wio-SX1262 Kit for reference.
To attach the iOptron hand controller 8409 to a 1.5" tripod Remixed from: https://www.thingiverse.com/thing:5179175 Category: 3D Printer Accessories
A case for the Seeed Xiao nRF52840 + Wio sx1262 fitting two 2000mah batteries in parallel. Battery: 2x 2000mAh, LiPo, 10mm x 34mm x 50mm Printed in PLA 30 days on battery
Update 28.12.2021: added a knob for the volume potentiometer This is a small case for a PAM8403 Amplifier. The small amplifier is ideal for PC speakers since it can be powered by USB cable. You need four M3 countersink screws to close the…
This is a fan mount/adapter for the top portion of the Morefine 7x40hs mini pc to allow a 140mm fan to cool the memory/ssd. Also includes the files for new rubber feet to allow the bottom fan to have more headroom and a holder for the AC…
This is a 1:100 scale hand operated bilge pump for the baltimore schooner Halcon 1840 wooden model boat kit. There are two versions to choose from: v1 - if you want to scale up this is more technically accurate particularly around the…
Vertical and Horizontal Antenna Case for Seeed XIAO nRF52840 & Wio-SX1262 No supports needed
Minimalistic holder for NRF52840 DK that avoids the awkward stance when laying on a table due to the battery holder underneath. This holder makes it sit flat and easier to plug in usb cables into and genrally nicer to work with. Its worth…
Holds two wax cylinders for yarn to run through on Silver Reed SK840 knitting machines. Also works on the tension masts for my SK500 and SK830. Not sure if this will fit the SR punchcard machines, I think they might have a different…
As I mentioned in my reference model description , if you are not careful when disassembly you can damage the micro SD card slot if the micro SD card is not ejected during disassembly… I needed a retaining perimeter to hold the SD card in…
Resized volume knob for the Yamaha HTR series of tuners
John Deer 2840 steering wheel nut cap
Very simple Xiao nrf52840 and 18650 case.
Eufy Indoor Cam Camera holder for Flashforge AD5M without an enclosure. Prints without supports
I was having trouble with the clips on this model, so I modified it to be slide-on instead of clip-on. The texture seen in my photos is from bumpmesh , the model will be smooth when you download it from Printables.
Introduction This is a mini, hardware-free case for Seeed studio xiao-nRF52840 + Wio SX-1262 mini node for MeshCore or Meshtastic. Design Designed for factory printed strip antenna. Battery-free USB powered node for use with laptop,…
Speaker adapter to fit Dayton Audio RS75-4 directly to BMW E31 840 / 850 to front doors and rear deck speaker box. Includes STL, 3MF & F3D. Inspired by this thread on bimmerpost:…
