P
PrintablesDavide Bucci
L298N Motor Drive
Model of L298N DC Motor Drive Controller Board Dual H Bridge
- Pobrania
- 1160
- Polubienia
- 12
- Ocena
- 0
Wyniki wyszukiwania: 8n
Liczymy pasujące modele…
P
PrintablesdjeZo888
OrcaSlicer KobraMax 0.8nozzle PLA config
OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…
- Pobrania
- 769
- Polubienia
- 15
- Ocena
- 5
P
PrintablesDaniel Rowland
Fanatec CSL DD & DD PRO Boost Kit 180 (8NM) Mount - Series 15 & 40 Extrusion M8 Bolts
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and…
- Pobrania
- 738
- Polubienia
- 94
- Ocena
- 5
P
Printablesjcp
L298N Dual H-Bridge Motor Driver Controller Board Case
Protective, low-profile snap-fit case for the L298N Dual H-Bridge Motor Driver Controller Board . Both the top and base have port and pin header cutouts with an exposed heat sink. The base comes with dual side mounts and a central bottom…
- Pobrania
- 594
- Polubienia
- 21
- Ocena
- 5
P
PrintablesShmilCat
L298N Case with Zip-Tie closure and Screw holes for placement
L298N Case with Zip-Tie closure and Screw holes for placement Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA Wood Category: Electronics
- Pobrania
- 454
- Polubienia
- 21
- Ocena
- 5
P
Printablesps915
ImpulseRC APEX Antenna Mount + GPS (M8N) + Crossfire
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
- Pobrania
- 442
- Polubienia
- 18
- Ocena
- 0
P
PrintablesDotNetWorker
Back nut 1/8NPT 3/8" Foster Connector or PCP Airsoft 8mm bulkhead
Back nut that is suitable for Foster and PCP bulkhead connectors. Specification: 1/8 NPT thread 3/8" diameter thread 6.4mm nut height 15.8mm nut outer diameter Print high infill, no supports required 0.1 layer height, but works on 0.2…
- Pobrania
- 340
- Polubienia
- 8
- Ocena
- 5
P
Printablesturbi40
Experimental IVI ONLY for A08N KST SERVOS !!!!!!!!!!!!!!!!
This project is a good flying model for ONLY for A08N KST SERVOS !!!!!!!!!!!!!!!! : easy to print with pla 1 hour to buid not complicated control command a big potential to test new wings hardware : 3S lipo 500 to 1000mah motor like…
- Pobrania
- 289
- Polubienia
- 50
- Ocena
- 0
P
Printablesgziegler
Pad-spacer insert for Shimano RS405 hydraulic brake calipers (Y8N218000 replacement)
This item can be inserted into the Shimano Tiagra RS405 hydraulic brake calipers to secure the brake pistons against accidental actuation of the brake lever when the wheel with the brake-disc is removed from the bike. Such actuation might…
- Pobrania
- 266
- Polubienia
- 10
- Ocena
- 5
P
PrintablesParagon
Makita BL1518N - Powiększenie Baterii 2x, 3x, 4x
Do pobrania moja wersja powiększonej baterii 2x, 3x i 4x względem wersji BL1518N do Makity, ja zrobiłem wersję 2x większą czyli 5s2p, dodaję 3 wersje tego adaptera do pobrania… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i…
- Pobrania
- 265
- Polubienia
- 19
- Ocena
- 0
P
PrintablesAtom's Lab
L298N Case
This is a case for the generic L298N module. It has a slide on top, and openings to reach the terminals. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 300 Microns Infill: Doesn't matter Notes:…
- Pobrania
- 249
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTim Collier
BRACKET FOR FANATEC CSL DD 8NM PSU - 40 SERIES MOUNT
Orient print with logo on the side, supports not required. I used 30% Infill, but with 3 walls 20% should be fine. The holes are made to work with M6 socket cap screws which also hold the brick in place. If you've seen this print for sale…
- Pobrania
- 227
- Polubienia
- 16
- Ocena
- 0
P
PrintablesLordEvilFish3DP
L298N riser
A simple L298N riser, it raises the motor controller 5mm above the floor, it helps protect the controller from scratches. Dimensions (mm): 43 x 43 x 5 Average print time with 0.4mm nozzle 70 mm/s print speed 0.2 layer height = 25 minutes…
- Pobrania
- 168
- Polubienia
- 5
- Ocena
- 0
P
Printablesfirewolf8385
L298N Motor Driver Holder ORP
An ORP-Compatible holder for an L298N Motor Controller. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design rules,…
- Pobrania
- 146
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDaystrom
L298N Spacer Mount
Recommend Printing in PETG or something with good heat tolerance considering the heatsink. Can be incorporated into existing 3D models, screwed, or glued in place. Optional mounting caps included in model.
- Pobrania
- 141
- Polubienia
- 3
- Ocena
- 0
P
Printablesbglasford1
L298N Mounting Plate
This mount has a minimum footprint, best suited for gluing down. Use four M3x4mm screws to hold the L298N board in place.
- Pobrania
- 121
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCHÍ TOÀN
L298N-RED module Case
This model used to cover L298N red type module.
- Pobrania
- 121
- Polubienia
- 5
- Ocena
- 0
P
PrintablesItzzzTim
Fanatec CSL DD & DD PRO Boost Kit 180 (8NM) Sim RIG Mount - M8 Bolts
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print Left and Right Side mounts I added a Cage, and some Space for the Blue LED on…
- Pobrania
- 96
- Polubienia
- 15
- Ocena
- 0
P
PrintablesNotLikeALeafOnTheWind
Din Rail mount for L298N Motor Drive Controller Board
A din rail mount for an L298N Motor Drive Controller Board. The board we used: https://a.co/d/cqiP37h You will need to print a tab to lock this mount to the rail. It can be found at: https://www.thingiverse.com/thing:3401942 or…
- Pobrania
- 93
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDDD
Fanatec 8nm Power Supply 8020 Mount
Print x2, slides over the Fanatec 8nm power supply and slides onto 8020 aluminum profile. No t-nuts required.
- Pobrania
- 92
- Polubienia
- 14
- Ocena
- 5
P
PrintablesMoe
Audi TT 8N CD Changer replacement (more Storage)
Since I'm using a Bluetooth adapter on the CD Changer port the CD Changer was kinda usless space. So i decided to change that, since space is not that much available in that car :-D Print it, tap the original screws in, use it :-)
- Pobrania
- 91
- Polubienia
- 12
- Ocena
- 5
P
PrintablesCryp7o
L298N H-Bridge motor driver mount
a screw / cable tie mount for an L298N H-Bridge motor driver
- Pobrania
- 86
- Polubienia
- 5
- Ocena
- 0
P
Printables2mD
SIEMENS GS58NFW40 flap holder
one of the flap holders on our freezer broke… i could just have bought a new one: https://www.siemens-home.bsh-group.com/de/shop-produktliste/00657908#/Tabs=section-fitsappliance/Togglebox=manuals/ Part number 00657908 or 00657906 ( left…
- Pobrania
- 79
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDavid Holecko
Shimano Bleeding Spacer Y8N219000
Compatible with Shimano: BR-R9170 BR-R8070 BR-R7070 BR-4770 BR-RX810 BR-RX400 BR-U5000 BR-RS805 BR-RS505 BR-RS405 BR-M9100 BR-M9110-R BR-M8110-R BR-M7110-R Name Compatible Y8FZ05000 Shimano Deore BR-M575 and also:…
- Pobrania
- 74
- Polubienia
- 15
- Ocena
- 5
P
Printablesnouc
PQ34 Audi TT 8N lift supports
OEM parts made with EPDM Printed in TPU with 40D hardness Insert 100% infill, end up much harder than original EPDM (Not yet tested outer part, but i suggest non 100% infill) Support needed Should fit into: Audi A3 Mk1 (8L) Audi TT Mk1…
- Pobrania
- 70
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMoxL
Avatar LN298N Arduino nano Simhub Shakeit Motor box enclosure
LN298N Arduino nano Simhub box enclosure I could only find a payed version, here is mine. You can find my wiring included for 12v version, I've used RK370 on my Fanatec CSL pedals. These STLs can be found in my other designs. Happy racing.
- Pobrania
- 69
- Polubienia
- 11
- Ocena
- 0
P
PrintablesmUSER
8N0853586A, Drain Tube
Its loose recreation of original part 8N0853586A. May need some tweaks depending on state of your car body.
- Pobrania
- 65
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJ 28
OpenRc Tractor MK3 Ford 8N Mod
Die Motorhaube, der Kühlergrill und das Lenkrad wurden neu entworfen.
- Pobrania
- 64
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBrokenTooth Designs
L298N + ACS712
Places current sensor on top of L298N. Requires M3 x (35) or 40 screws
- Pobrania
- 59
- Polubienia
- 7
- Ocena
- 5
P
Printablesalexb
ESP32 & L298N Mounting Plate for OSWW (Open Source Watch Winder) – Mod/Upgrade
This project provides a custom mounting plate designed to securely attach an ESP32 (30-pin) , L298N motor driver , and a 15mm Rocker Switch (2-pin) to the OSWW (Open Source Watch Winder) . The plate is specifically tailored to fit the…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 5
P
PrintablesCHÍ TOÀN
L298N-B-Green-Case
Case for L298N-B-Green module. it used for L298N-B-Green module only not fit with L298N-Red module.
- Pobrania
- 56
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMatt Andreko
UBLOX NEO-M8N GPS 30mm mount
I bought a GPS unit for my RC Fixed Wing, and it came in a round plastic shell which was difficult to mount, and took up a lot of space. I wanted to add it to my flight controller stack, so I opened Fusion360 and started designing. GPS…
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
Printablessnintendog
8n24 Movement Holder for NH35 case
Its a basic 3mm Movement holder for the Seagull/Miyota 8n24. 2mm is to hold to the dial and a 1mm Lip to grip the main body below the stem. Its a Bit Shallow for the 8215 Use the FreeCad File to make the lower pad to 3mm. You can change…
- Pobrania
- 52
- Polubienia
- 2
- Ocena
- 0
P
PrintablesShmilCat
Mini L298N DC Motor Driver Case
NOTICE !!! - This is for the L298N Mini! not the regular driver. The case is closed by a zip tie and includes mounting holes the mini does not have the heatsinks, the screw connector or the enable input. however it is smaller (and…
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
Printablesmichal.cerny
DeWalt DCC018N Wall Holder
můj první model ale snad někomu bude dobře sloužit.
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
Printablesps915
ImpulseRC Alien Antenna Mount + GPS (M8N) + Crossfire
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
- Pobrania
- 52
- Polubienia
- 3
- Ocena
- 0
P
PrintablesChris Vahi
Tube holder with PC4-1/8NPT Pneumatic fitting
While trouble shooting filament resistance issues setting up the MMU2S I found that the clamps for the ends of the PTFE tubes on my universal auto-rewind spool holders were creating a pinch point which increased resistance in the tube. To…
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 5
P
PrintablesMath
DIN Rail Mount for L298N motor control driver / double H-bridge
This mount places the L298N motor controller on your DIN rail, saving you some space in your electronics assembly. It fits this motor controller board from e.g. Reichelt:…
- Pobrania
- 48
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSean Starkey
38N Hinge Drill Guide
I needed a drill guide for all the cabinet doors in my kitchen I'm making. I like the Blum 38N soft close hinges with ½" overlay so found the specs and modeled this. It's intended to be put along the edge of the door (against the…
- Pobrania
- 47
- Polubienia
- 8
- Ocena
- 0
P
Printablesdrei-d-w
Dewalt DCC018N Hose Adapter
The thread on my hose connection is the wrong way round so that it cannot be turned onto the hose. This adapter has the thread with the correct orientation
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMichael Samblanet
Bestep L298N Housing
I have a L298N motor driver board that does not match the housing available on Printables, so I made my own housing. Board is labeled as a "Bestep" L298N" Consists of a main body + friction fit lit. While I added some ventilation slits,…
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCallmelee
Obtsacle Avoiding Robot using L298N
This is another version of the obstacle Avoidance robot using Arduino Board. all the files are printable, watch my video for making it, The video here: https://www.youtube.com/watch?v=v97VBkiN7e8&t=340s&ab_channel=LeeCuriosity It takes me…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
Printablesfabse-hack
L298N Lego mount
L298N LEGO Mount Integrate your L298N motor driver seamlessly into your LEGO projects with this custom mount. Designed for compatibility with standard LEGO components, this mount provides a stable and reliable platform for your motor…
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDoug Joseph (design8studio)
Towel Rod Holders for Heavy Duty Cleaning Towels (paper based shop rags) - https://amzn.to/3K6wq8N
Fit for "WypAll General Clean L30 Heavy Cleaning Towels" - makes functional use of 1" wooden dowel - see my YouTube video of this part in action: “LowRider v3 DIY CNC - Easy quick project - super satisfying!” I am including the SVG files…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 4
P
PrintablesPEDRITO LOQUITO
Puente H L298N a escala 1:1
Este modelo no esta echo por mi: Creditos A Lemos
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLixonski
Fanatec 8nm Powerbrick Mount for Playseat Challenge
Simple mount/holder for the 8nm powerbrick for Fanatec CSL DD to place on the tubes of Playseat Challenge. Use 25mm M3 bolt and nut to fasten to the tube. If you only have larger bolts you can probably drill it out and use those. There is…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesShmilCat
Double L298N Case with Zip-Tie closure and Screw holes for placement
This is a case for 2 L298N boards, if you need two and don't want to use two separate cases :-) Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15-20% Notes: should print fine with any…
- Pobrania
- 31
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRyan3D
Mk1 Audi TT 8N Wall Art (convertible)
I could not find any wall art stl of the convertible mk1 TT so i made one my self, it might not be fully accurate as i had to improvise a bit to add details but i think it turned out pretty good . i printed it out from black Pla+ but you…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRowan Pulman
HP Pavilion 250 G6 (3168N6W) Laptop: Desktop Conversion
Part Size (L*W) Infill Supports Lid 214mm*193mm >20% Yes Body/Base 208mm*186mm >20% No Pwr Button 14.5mm Dia >30% Yes Additional assembly parts: HP 250 G6 laptop motherboard w/ heatsink, RAM installed M.2 2280 SSD HP wireless card w/…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJohn Pang
PL08N Inductive Probe Mount for Hero Me Gen 5
This model allows you to mount a PL08 Inductive Probe, to a Hero Me Gen 5 series Hotend suite.
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printablesps915
ImpulseRC Reverb Antenna Mount + GPS (M8N) + Crossfire
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWren Industries
Dragino DLSO8N LoRaWAN Gateway & Antenna Mounting Brackets
The Dragino DLSO8N Outdoor LoRaWAN Gateway comes with mounting brackets for both the gateway itself and the antenna that I do not particularly care for. I created my own brackets to replace them. These brackets are designed for 1" EMT…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKiko Jr.
MSI K8N Neo4 SLI IO Shield
IO Shield for the MSI K8N Neo4 SLI motherboard
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
Printableschabicht
Front lower suspension mount replacement for Carson Specter X8N (500205774)
Part No. from Manual is 500205774. .f3d file sketches contain additional shapes you can remove from the material if you want the parts to become more like the original parts. I printed the objects with the ColorFabb XT-CF20 carbon fiber…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDanO83
AR Wing matek f411 wing + ublox m8n mount
AR Wing matek f411 wing + ublox m8n mount Use some m3 standoffs for the gps mount (I used 20mm standoffs), then glue the base to the foam. You could use the m2 screws that come with the matek fc to fasten it, I used some longer ones. The…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
Printablesdrei-d-w
Dewalt DCC018N 30mm blower adapter
30mm blower adapter (yellow part in the picture) for the original blower hose adapter or in combination with this: https://www.printables.com/de/model/899140-dewalt-dcc018n-hose-adapter
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesChris Vahi
Tube holder with PC4-1/8NPT Pneumatic fitting
While trouble shooting filament resistance issues setting up the MMU2S I found that the clamps for the ends of the PTFE tubes on my universal auto-rewind spool holders were creating a pinch point which increased resistance in the tube. To…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOmer Droub
Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSaleh Hasanli
L298N motor driver case
This is my first project that I make it can be inaccurate. You can tell what is wrong in model
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSaleh Hasanli
Updated L298N motor driver case
You can put your motor driver. Updates: L298N Logo, more curved edges, space for 2-sided tape
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
Printablesajkiraly
HY-DIV268N-5A stepper driver mount
This is a DIN rail mount for the HY-DIV268N-5A stepper driver. It's meant to be used with this clip . Designed in onshape. Link to project.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAskewedBox
Sterilite 1988N-L Handle
This is a replacement handle designed for the Sterilite 1968004 74-Quart Underbed Box. I printed the handle vertically to maximize its strength and used M5 screws for the hinge. For printing, I utilized PLA with 4 walls and 20% infill.…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMortalWombat
Hero Me Gantry Adapter and PL-08N Mount for Longer LK1, Alfawise U20, U30
Just like it says on the label, this is a gantry adapter plate to mount the Hero Me Gen 5 fan system on several Longer/Alfawise printers. It has been tested to work with the stock Longer hotend, CR-10 hotend, and micro swiss hotend. The…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printablescrazy.biker_84
LiPo strap mount for HGLRC Ublox M8N GPS
LiPostrap mount for the HGLRC Ublox M8N GPS Print Settings Printer: Renkforce RF2000 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100% Filament: Renkforce TPU, TPE Notes: I´ve printed this with a 0.8mm nozzle, 2 outer…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printableschris
ryobi 16g tool battery cover r18nl16
ryobi 16g tool battery cover r18nl16 printed in tpu keeps dust and bugs out
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesiSchumi
Dragino DLOS8N Wallmount
Deutsch: 🛠 Wandhalterung für Dragino DLOS8N Outdoor LoRaWAN Gateway Ich war auf der Suche nach einer einfachen, aber stabilen Möglichkeit, mein Dragino DLOS8N Outdoor LoRaWAN Gateway an der Wand zu montieren. Dabei wollte ich eine Lösung,…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRuben E
Kolver RAF38NS/FR Handle
A spare switch/handle for the Kolver RAF38NS/FR screwdriver.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesmathew chen
Miyota 8N24 spacer ring for SKX007 style case
I made this ring to fit a Miyota 8N24 into an SKX007 style case which fits a Seiko NH35. The wider space around the movement with the ring also allows for dial dots to be placed for a skeletonized watch dial ring, as there aren't many…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesrtd01
CAT HP MFP178NW PRINTER GUARD
CAT HP MFP178NW PRINTER GUARD Designed for the HP Color Laser MFP 178nw. Stops your cat from starting off prints on your printer while sitting on the printer pressing buttons. Meterials, Metal rod 145mm Length by 1.9mm thinkness. Gorilla…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOnur NEŞVAT
Stor Perde Motor Kutusu V5 — ESP-01 / L298N / JGY-370
Stor perdenin boncuk zincirini 12 V redüktörlü DC motorla hareket ettirmek için tasarlanmış, duvara monte bir motor ve elektronik kutusu. Gövde, sökülebilir ön kapak ve kasnak olmak üzere üç baskı parçasından oluşur. Zincir kılavuzu…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeopleware
Reparaturset Einlege Glasboden für Kühlschrank B/S/H Siemens KA58NA70 04
Ermüdungsbruch der Einlegeböden der B/S/H Side by Side Kühl/TK Kombis einfach repariert Bei meinem American Side by Side Kühlschrank KA58NA70 04 von Siemens sind nach 10 Jahren alle großen Böden an den Ecken angebrochen, teils sehr…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
P
Printables
PQ34 Audi TT 8N lift supports
OEM parts made with EPDM Printed in TPU with 40D hardness Insert 100% infill, end up much harder than original EPDM (Not yet tested outer part, but i suggest non 100% infill) Support needed Should fit into: Audi A3 Mk1 (8L) Audi TT Mk1…
P
Printables
Nail gun bumper (fits Ryobi R18N18G)
Replacement bumper tip that fits Ryobi nail gun (model: R18N18G) Printed in TPU 30D hardness.
P
Printables
TT 8N Oil Catch Can Mount
I designed this mount to install a generic eBay-style oil catch can in my Audi TT 8N using the existing battery tray location. It bolts into a factory hole and clips onto the side of the battery compartment for a secure fit—no…
P
Printables
(Fanatec) DD 8Nm Lincoiah PSU Holder
Holder for a 180W Lincoiah PSU for the 8Nm Fanatec DD. This will NOT work with the original Fanatec PSU , for that one please check out this model
P
Printables
M8N GPS Holder – Top & Bottom Plate Mount
A secure, lightweight mounting system for M8N GPS modules featuring a top and bottom plate that clamp firmly around the unit. Designed for stable positioning and reduced vibration, the assembly uses M4 8 mm screws and M4 nuts for a tight,…
P
Printables
Nail gun bumper (fits Ryobi R18N18G)
Replacement bumper tip that fits Ryobi nail gun (model: R18N18G) Printed in TPU 30D hardness.
P
Printables
Baseus Magnetic Wireless Phone Holder Mount for Audi TT 8N
The mount provides a clean, factory-like installation without the need for permanent modifications to the dashboard. It securely holds the phone while maintaining easy access to the screen and charging functions of the Baseus magnetic…
P
Printables
GPS Neo M8N support
Simple support for this GPS Neo M8N (GPS+Compass) https://www.banggood.com/Ublox-NEO-M8N-Flight-Controller-GPS-with-Protective-Shell-for-PIX-PX4-Pixhawk-p-1005394.html?rmmds=myorder&cur_warehouse=CN Category: R/C Vehicles
P
Printables
Boost Leak Kit for Audi TT MK1 (8N) 180
While I did not create this YouTube video, I found it very helpful. Print these two parts, ‘bungs’ as they call them in the UK. Order a screw-on valve stem (½" or 12mm diameter) Link to the Valve Stem on Amazon: TR416 Metal Valve Stems,…