Liczymy pasujące modele…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
A 10 inch rackmount for m910q mini computers. Particularly stable Flat base on the front of the housing Integrated space for housing feet Precise fitting of the housing Clips to prevent it from being pushed out Printing possible without…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
I could not find a good privacy cover for the Logitech C910 webcam, so I made my own. This thing is heavily influenced by the excellent C920 privacy cover by OnlyTono . The privacy cover consists of two pieces. The base goes on top of the…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Certainly! Here's a brief overview of the history of the 1910 Indian Single motorcycle: The…
This model is compatible with the lego system.
ENG: mount a LENOVO M710q or M910q under a table, cupboard or wherever it fits. the nodges fit the rubberfeet, so the PC can't slide out. print the adapter four times. made with Tinkercad. GER: mit vier von diesen adaptern lässt sich ein…
sparepart spacer if you lost your Shimano crank spacers. nothing special
Fiat S76 "The Beast" year 1910 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
A common failure in Sony headphones of similar construction is the hinge part which eventually fails due to high stress caused by the folding mechanism. This makes headphones unusable and ready to be trashed. This model replaces the…
🇺🇸 Welcome to Houston, TX! This model was made by Nick Iland of @iland_design . The Harris County Courthouse of 1910 is in the Classical Revival architectural style and has six stories. Two courtrooms inside are two stories each. It was…
Adapter for LG portable standing/rolling 9000 BTU AC unit, model: LP0910WNR May fit other models as well. I wanted something to replace the flimsy plastic panels included with the unit, so i made a more solid window panel with a wood…
---> English Lab Rax - 10" - 1U - Lenovo M910q/M720q: Lenovo M910q 10" 1U Mount with 2 mounting screws. Edit (09,20,2025): Added support for the backside I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U -…
Some Custom Keycaps to replace the programmable “G” keys on your logitech G910 keyboard (may be compatible with other Logitech keyboards also)
Step back in time with this meticulously crafted chess set, inspired by designs from the Russian Empire between the late 18th and early 19th centuries. Perfectly fitting a 45mm field size, these pieces echo the elegance of the past with a…
Replica of Toyota part 69762-14910 - Door Lock Knob Bezel for a MK3 Supra. There are two versions here: NoLockText “LOCK” embossed In partnership with TougeNation , I've added a version with no embossed lock text. This version is designed…
I have had the swith-pros panel since 2018 but never had a good mount for it. Originally I had it just screwed directly into the end mesh piece of my 2018 f150 overhead console. The mesh insert has become warped and now that i have a 3d…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
Some spare HDD mounting rails compatible with Q510, Q520, Q910 and Q920 of the Fujitsu ESPRIMO Q-Series which are commonly available here or here . Spare part number: C26361-K1011-C40-*-Y369 Print without support in PETG or ASA at 0.2mm…
Took a beautiful, detailed model by Louisdioramas and hollowed it out to make a slot car body in 1/32 scale. It's a very small car, but a great model. Not sure if you can fit a chip in it for digital or not. Category: Hobby
Tool to help with the installation of Shimano BB-R9100 and other similar sized 16 spline bottom brackets. I needed one for a 3/8th inch socket driver, so I remixed https://www.thingiverse.com/thing:3335307/ Printed with PolyMaker ASA…
Simple wall mounted holder for the Tefal DT9100 steamer. Would probably also fit similar Tefal steamers. Remember to mirror the part if you want the steamer to face the other way. IMPORTANT: The pictures and the presliced gcode is…
Print it with some supports, it needs to be made fairly accurately for it to fit properly
I got a secondhand Lenovo M910s and waned to put an M.2 NVMe drive in, but there was no bracket there to secure the drive. So I designed one that slots to the retaining slots. You just need to put in a heatset insert and then screw down…
Realice este modelo para quienes necesitan imprimir números
This model is compatible with the lego system.
LEGO Porsche 910 Bergspyder 1967
A simple vertical stand for the Philips All-In-One 5000 trimmer (MG5910). Includes models with and without a spot to hold the nose trimmer attachment.
The two holes in the upper side are for Thread inserts M3 (I bought some from Amazon “Ruthex M3”)
This is a remix for mounting a Logitech C910 webcam. For a custom look, I lofted it to align with the back of the C910 geometry once the stock hardware is removed. Hint - you have to peel back most of the padding to get to the screws,…
The Story So, get this: I accidentally busted my Sony WH-910N headphones by, you won't believe it, sitting on them! Went to the repair folks, and guess what? They said Sony doesn't have replacement parts. Can you imagine? I thought, "No…
materiál PLA tryska 0,4 mm vrstvy 0,20 počet kusů naznačen v názvu souboru Soubory jsou seřazeny do složek podle barev, tolerance dílů umožňuje sesazení bez použití lepidla, ve složce " ostatní " jsou soubory pro variantu tisku. Další…
Mount I designed for my RatRig V-Core 1.3 to hold a Logitech C920 webcam, angled downwards at 20 degrees so it can see the entire bed. This fits 2020 extrusion and mounts with M5 T-nuts. There s a clearance hole for a standard ¼" tripod…
Philips Norelco Trimmer Organizer for MG7900 MG7910 I just needed a place to store and organize my Philips trimmer and all the accessories. This print holds the trimmer itself and all of the guards and extra pieces. I'm also including the…
I've been using a Logitech C910 as my Octoprint camera for as long as I've been using Octoprint. I've had a bunch of different ways to mount the camera, and this is yet another. Once all the stock mounting junk is removed from the C910,…
quick remix Category: 3D Printing
This model is compatible with the lego system.
About the design I had purchased many of these web cam devices for my workplace, and some of the packages did not include the privacy covers. This is my interpretation of the stock cover with some changes. This design uses a hinge pin,…
I really liked the power, the short length and the design of the Philips Pro (HPS910/00) hairdryer that I bought. However, there was no diffuser (the cup-like thing with the many spikes ;) included. Neither was there one available from…
This is a replacement for the stock part 55620-89103 . It uses the original carriage for the cups and the s shaped bar. I have confirmed the design fits and the cup holder works. This design improves on the locks in the back by using…
Fits for Gardena garden shower type 18911-20 and 18910-20 (Front of showerhead ca. Ø58; neck ca. Ø35,5mm) Possible materials: all materials possible, Asa or Extrudr Greentec because its UV-Stable Reccomendet Nozzle-Ø: 0,4 Printable on…
Not much to say, webcam cover for A4Tech PK-910H or any other tube-style camera with 28.5 mm diameter. Easy to print, no supports needed. Use piece of standard 1.75 mm filament as a hinge rod.
Use variable layer height in PrusaSlicer to get the top details better (0.1mm) and print the base with 0.2mm. Edit 29.03.2024: Added versions for "Chrome" and uploaded missing STL file for “Outlook LED” variant. Edit 31.03.2024: Added…
This is a 3D print for a cyberdeck built within a Nanuk 910 case featuring a Raspberry Pi 4, SDR, 7-inch display, various I/O ports, and much more fully customizable hardware. Step-by-step instructions for assembly, software, and more can…
This model is compatible with the lego system.
SIde-rails / Handles for your the ICOM IC-910 amateur radio transceiver. You will need (1) M5X15 and (1) M3X14 screws per handle.
Seadoo Latch-Cover (Part #291000165) This is a replacement latch for the front cover (storage compartment) on earlier model Seadoo personal water craft. It was designed to look very similar to the original, but because TPU tends to have…
Replacement clip for Topcom Twintalker 9100 PMR. ChangeLog 001: #fixed weak points and made the lock work better with less stress on the part. i got the best result with: 100% infill 40mm/s base print speed. Above raft extrution ratio of…
I made my own version of the clips for the om642. You can pull it in with some threat. Meine Version des Clips für ein Motor der Einlasskanalabschaltung des om642. Extra zum einziehen gedacht. Somit ist der hintere ein Kinderspiel. Print…
Mount your Lenovo tiny computer for example under the table. It fits over the feet, so it wont slip out
You'll need to print two of them, then they snap around the computer to lift it off the surface.
This model is compatible with the lego system.
This is a remix of @Abomb's G910 foot . Printed with Prusament Matte Black PETG , bear in mind in case you want to download GCode, I use a .6mm nozzle diameter ! Here is a demo of the snapping feature :
Templates for aligning the needles between the A and B position when beading. Suitable for Brother KH910 and machines with the same bed. Printed with 0.6mm Nozzle diagonal on the printbed.…
Wandhalterung für Lenovo M910q ThinClient Wallmount for Lenovo M910q ThinClient Druckereinstellung in Cura: Layer Height: 0,2mm Wall Line Count: 3 Z Seam Alignment: Sharpest Corner Seam Corner Preference: Hide Seam Infill: 20% Infill…
Lenovo Thinkcenter M910 - Mini Homelab server rack for my non-conventional mini homelab rack Dimensions: in mm X: 290.008 Y: 185.000 Z: 45.000
use two 12mm long m3 screws to mount it. double sided tabe on the bottom (optional).
This is a clip to mount the switch panel from Switch-Pros SP9100 to a Toyota Tundra overhead console. I will post a make, showing the finished product. Category: Automotive
Nut/stud for the 9100FX speedglas welding helmet, allows for tightening and loosening, of the drop down welding lens and lifting of the helmet to the vertical position. Modeled off the original that broke with a couple of adjustments for…
When making a Boring Company style (not a) flame thrower, I needed to adapt the left-hand threads of the wand to a Burnz-o-Matic extension hose to use blue cylinders. I tested for leaks using soapy water, and it was leaking all over, so…
I needed a mounting plate for my AOC STGN-I2S network card to install it in my Lenovo M910. Since I couldn't find one that fit my network card, I decided to design one myself. It worked well enough for me to mount the card neatly in the…
I've got several of these Kwikset smart door locks around my house for a number of years. They generally work pretty well but the summer months can play havoc with them. During summer the 70%+ humidity swells doors, frames etc and can…
A flat bin to stow away a gluegun, with room for a couple of gluesticks.
The print is pretty straightforward. You don't need any supports. Any vaguely-rigid filament is fine. I used PETG.
I made a few small tweaks to Blue's design to the support the Logitech C910. I'm using an M3-35 screw and M3 Nyloc nut. You need to remove the mounting base but the pathway is set. The tolerances are tight so pre-thread the screw through…
I am building a server from my Lenovo ThinkcentreM910s. Since I want to accommodate as much storage space as possible, I removed the DVD drive to accommodate another 3.5 inch HDD. For this, a total of 5 or 6 rivets have to be drilled out…
Why spend $2 plus shipping when you can print your own replacement part? After we moved in to our new place we found the range vent was missing the baffle plate blowing all the greasy exhaust air back in the kitchen. Found image with…
Meet the Webcam Arm Lamp Truss or WALT for short, he's here to hold your webcam and remind you to smile while you Skype. This is an upgrade of my original Logitech C910 webcam mount in an attempt to increase both it's functionality and…
This is my first project using Autodesk Fusion 360 (my new 3D printer Prusa MK4S too). The design uses 1.75mm filament for the hinges. I've used parameters in Fusion 360 to ensure proper fit, including: Spacing tolerance Chamfers…
Blank PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. You can use this to create your own brackets.
I needed a pair of fuel tank cushions for my Suzuki ZR50 SL, so I borrowed a piece from a friend and made these model based on the factory part. I've printed it from Fiberlogy's FiberFlex 30D, and with the parameters given in the attached…
Replacement rear motor mounting clip for Bernina 910 from 1984. P/N 323 868 03 After regular maintenance on a Bernina 910 sewing machine, I discovered a broken rear motor mounting clip. After 20 minutes to model and print a new one we…
Hey everyone, I designed this holder for my work lab, so I wanted to share it with you, This holder perfectly fits the Dremel 9100 tool and attaches to the wall with regular wood screws. Have fun.... Print Settings Printer Brand: Prusa…
I was worried of switching the voltage selectors by mistake so I added a little bit of height to the top. Now those switches are aligned with the case and you will not damage a 3V3 board by mistake. Link to original files:…
Adaptér odsávání pro použití s běžným vysavačem.
Z racji że nigdzie nie jestem w stanie kupić samej zaślepki napędu 5,25" do stacji Dell Precision T7910 to ją zrobiłem samemu. Mając drugą stację T7610 która taką zaślepkę posiada poświęciłem chwilę czasu i dzielę się z Wami moim dziełem,…
This is a 3D-printable replacement for PLAYMOBIL part 3007691 / 30076910 , the round tower roof tip / top cover used on the classic PLAYMOBIL Steck castle construction system. The original part can be found on the classic PLAYMOBIL 3666…
This makes it possible to put the front on the case without having the drives accessible from the outside easily.
This is for wall mounting a Foscam FI8910W Camera. I wanted to mount multiple cameras in the shop higher on the walls but not on the ceiling. I had several of the cameras that we were replacing and wanted to use these in the shop.
Extension of the bean hopper for coffeemaker Krups Sensation EA910B10. PETG
Add a Qi charger to your Logitech G910 keyboard! Requires: Generic “Qi Charger Module” from aliexpress (as pictured). It's modelled for the Micro-Usb version but it might work with the usb-c one too. M2 Screws and Hex nuts. (2x 8mm 2x…
This mount fits the body of the Logitech C910 once the original mounting hardware is removed. The mount fits over the back of the camera and can be secured into place using a M4x22 bolt. There is also a flange that the camera fits into on…
Summary A remix form the nicely designed Logitech Webcam mount. This one is made for the C910 / C920 which you can tighten with a screw with a M6 bolt directly in the simrig. It's adjustable in height so it's usable for different monitor…
With this Adapter you can mount a PanelPilot SGD 43-A HMI Touchscreen in a Mercedes Sprinter.
This is a direct-fit replacement tailgate latch hook for the Polaris Ranger (OEM Part 5459101 ). The model is designed to match the original geometry and installs with no modification required. It can be used on either the left or right…
These prints are designed to fit on a 40x20mm aluminium extrusion to place a disto S910 in the centre of a MH for easy measure downs/dips. I'd recommend printing it in a very robust plastic - I use Nylon+CF. Print the clamp piece with the…
This is a holder for a partly dissasembled Logitech C910 webcam, designed to fit the RATRIG VCORE 3.1 enclosed version
Mellanox ConnectX-3 dual QSFP+ PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. Use a bit of force to tap the screws.
The old Life Fitness treadmills models like the 9100, 9100HR and similar like the 9500 lack the possibility to conveniently hold your phone or tablet. Here are my 2 solutions for the matter. One clip that goes around the display and one…
Do ramki dodałem mocowanie do Adaptera pico psu 12vDC-SATA. Do kupienia stąd: https://pl.aliexpress.com/item/1005006503128543.html?spm=a2g0o.order_list.order_list_main.41.2baf1c24esuqz6&gatewayAdapt=glo2pol
Replacement keyboard leg sven kb-g9100. ABS, supports needed, 0.4 nozzle
You need four shot M3 screws to hold the PSU to the plate and then use the original screws from the Amiga PSU to hold the plate in the case.
Had to remix to fit the keystones I grabbed off amazon https://amzn.to/478hoLz
A clip for microphone phantom power adapter which can be used to stick the adapter onto your trousers. This adapter can be used to power up your AKG C519 ML instrument microphones.
This model is made for a standard 19 inch network rack. Simply print two of these and they sandwich the switch. The front has a cutout for a nameplate.
French: Les clip de mes cuvettes se sont cassées alors je les ai rapidement modélisé en laissant un peu plus d'espace que l'origine parce que le PLA est un peu moins flexible, la pièce marche nickel. j'ai mis 25% de remplissage pour…
