735 modeli
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Gel heart-shaped shaped wrist rests are often used with split ergonomic keyboards because they are accessible and relatively inexpensive. This print wraps around the gel rest and allows for tilt and height adjustment using M6 screws and…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Should fit the following models: Gaggia HD8749/01 - Naviglio HD8749/11 - Naviglio RI8260/01 - Velasca RI8263/01 - Velasca RI9304/01 - Platinum RI9304/11 - Platinum RI9304/21 - Platinum RI9305/01 - Brera RI9305/11 - Brera RI9700/60 -…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part is for quick adjustment of the height of the rotating chisel. You need the printed part, a 608 ball bearing, a steel round bar (must be turned to fit), and M5 bolts with nuts. Additionally you need a small spirit level, I use a…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar. I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road. Printing: These…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
To adjust the gas quantity, loosen the lower screws slightly and then turn the gas tank with the tool presented here until the gas quantity is set correctly again.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
A much needed tilt lock for the: Phone Holder, smooth tilt adjustment, prints in place by E. Soderberg Here's a simple addition to the phone holder that allows you to lock it. Just slide it on when you need it. When you're done, switch it…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
Last night I had to readjust the Super PINDA on one of my printers. I found a bunch of height gauges for the old PINDA/MINDA on prusaprinters.org, with a height of 1-1.2 mm: https://www.prusaprinters.org/prints/27679…
Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…
For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…
Provided with brand new EAGLE 12 speed system, this tool allows you to set the correct distance between the pulley and the cassette. Print instructions You are absolutely free ! I printed it in PLA, no need to set the infill as it's…
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
It's a simple tool to help fine-tune the bed leveling.
——Work in Progress—— [3 JULY 2025] Uploaded; Base_Top_v2.stl //Modified clearance, can set bearing easier Base_Bottom_v2.stl //Modified clearance, can set bearing easier and able to print without support. [5 JAN 2023] Uploaded;…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
This is a simple guide for adjusting the bed leveling knobs for screw tilt calculated adjustments. The guide sits on top of the knobs and fits around the plastic where the screw comes through. I line up the “spokes” of the printer knob…
All in one. Print in place. Qidi Q1 Pro bed leveling tension knob v2. Every inside tick is 2 minutes. Every outside tick is 2 minutes. Total of 60 minutes. I've also updated the screws_tilt_adjust macro so it probes a reference point in…
Tool to adjust gear lever of a VW Golf 2 Category: Automotive
Focus adjustment tool for Raspberry Pi Camera V2 Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: 3D Printing
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
This is a remix of https://www.printables.com/model/176417-phone-holder-smooth-tilt-adjustment-prints-in-plac I solved the problem of it not staying in place by adding a locking mechanism. You pull the adjustment knob out to adjust it and…
Tool to make tramming the Bambu Bed easier. The OEM bambu bed knobs are really small and don't offer a good surface to grip. The adjustment knob at the back of the printer is especially obnoxious due to its position and the angle. This…
I needed something to make it easier to adjust the knobs underneath the buildplate while doing the paper leveling or when using the Klipper “screw_tilt_adjust” Result is this 12 sided key that fits the leveling knobs perfectly. I kept the…
Adjust your extrusion multiplier if is to tight or to loose. Remixed from https://www.thingiverse.com/thing:3824154
This remix adds an easier way to adjust tension on the tension cam and, to have the option to use the modified ribber arm with the side-mounted posts with the CSM version from JeepingJohnny (MrRoboto19 remix) or my colorwork yarn mast, an…
Same thread as the original nut. Only modified the outer profile.
Plate needed to adjust the gearbox linkage on a Volkswagen Golf II GTI 16V. Tool VW 3104
Adjustment gauge for Shimano 12 speed road drivetrains. Set the B-tension screw to align with the proper mark on the gauge. Useful if you don't have the Shimano original. Can be printed with a color change for the text, color the tops of…
Small tool to adjust the bed corners and hold the knob in place while tightening the lock nut. I found that adjusting the level of the bed was a bit of a struggle for me: Because I have big fingers and those little knobs are difficult to…
Adjustment kit for the Vanos in BMW engines (M52 and M54) I found the Vanos adjustment measures on BMW forums and made this jig/kit to adjust the Vanos to these parameters. It worked a charm on my engine swapped Z3 who's vanos got out of…
Direct from factory, the K1 Max bed level is awful and the official method for levelling (bottom cover off, reset z-stepper belts) is both cumbersome and inaccurate. I swapped out the stock bolts and spacers and fitted manual adjustment…
In my Tesla 2021 model 3, I have a history of passengers stepping on the seat adjustment knob (the horizontal one that adjusts the position, rear tilt and front tilt of the seat) when getting into or out of the car. I've had to call…
NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…
It helps you offset pinda and nozzle far easier than paper and ziptie method. Note: It is for newer S Pinda 1.5mm only. For 0.8 older version, you could open freecad file and decrease pad from 1.5mm to 0.8mm, then export stl file. Steps:…
Aquarium floating ring with auto water height level adjustment
It is really useful that BTT have designed the Eddy probe to fit the original stock sensor on the Voron Stealthburner. Unfortunately the sensor is well and truly buried when the SB is assembled. Therefore at least the SB fascia has to be…
Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…
Simple tool to set or check height of the P.I.N.D.A. sensor. Model provided in variety of heights 0.8 to 1.2 mm.
simple Spacers to Adjust the height of your Cr Touch Probe. Multiple Sizes, Just Add them together to build up the height you need. Or you can just adjust the Height in your slicer.
This is a tool to make vertical adjustments to a A2 style front iron sight. This is specifically designed for Springfield Armory flip up sights as shown in the original picture. This can be printed off of the base of the tool with zero…
h' I remixed the model from Richard Ferrington for 120mm Fans. Maybe its needed to print Spacer Feets to allow more Airflow https://www.printables.com/de/model/867321-sovol-sv08-low-profile-vibration-isolation-feet i used the 35mm spacer…
I printed the original height adjustment tool which is awesome since it is a consistent reference to set the SPINDA height to, and also because it stows out of the way right on the printer frame after use. However, I have a Bondtech LGX…
ADJUSTMENT SCREW for cabinet ventilation Layer height 0.2
Creality Ender 3 users please read last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when steppers…
This is a series of Upgrades for the Voron 0 including Voron 0 ZTap Probing ZTilt Adjustment & Knomi V2 Display Full attribution & Credit to the Voron Design Team for the Original Voron 0 design and the CAD files this upgrade is based on.…
D.R.O.P.P.E.R. Durable Rapid Object for Painless P.I.N.D.A. Easy Re-Positioning Simply drop your P.I.N.D.A. down onto this tool for the perfect (?) P.I.N.D.A. position. To be honest I don't know if it's the perfect P.I.N.D.A. position,…
Minor modifications to lego-like accessories for giant lego wreaths Adjusted internals and transition angles for ease of printing/additional depth for assembly, added “LORGO” text to top of stud Based on these items:…
Qidi 4 plus bed screw adjustment wrench .
You can use this as an alternative to a store bought watch bracelet holder when replacing and adjusting them. I've printed it at 0.2mm PLA and it seems to do the trick. The spacing is adjustable and works with many strap sizes. Source…
Fits ALL KTM, GASGAS, Husqvarna MX&ENDURO 2014-2022 models with 17mm high speed compression adjuster.
P.I.N.D.A/M.I.N.D Adjustment Tool
Simple 1.5mm Z-Height adjustment for Hotend / Probe 8mm Eva assembly
Bauanleitung Fräsvorrichtung für die Makita RT0700 Fräse: -Compatible with: dewalt D26204K-QS. Update 20.04.2025: 32mm hole system guide aavakiable as an Add On https://www.printables.com/model/1249568-32mm-hole-system-add-on Update…
Ender 3 S1 Plus Bed Adjustment Lock for Aluminium Wheels Print in PETG for flex..
This is an improved bearing hold-down plate for the Anycubic ACE Pro, designed to be stronger and to add adjustable tension to the filament drive assembly. Properly holding down the drive wheel shaft and bearing is critical for reliable…
3D model of Skoda Fabia I Headlight Adjustment Gear. The old plastic gears started spinning on the shaft so I made a new ones. Instructions: Print orientation: gear up, 10mm hex touching printer bed PLA (205/65 °C works for me), 0.1 mm…
If you struggle adjusting the timing of your cuckoo clock because you cannot get precise movements of the bob, this is the thing for you. The shaft and pine cone bob are threaded (M10x1.5) and enable very precise fine-tuned adjustments.…
L Bracket with adjustment slot - Collection - Staffa a L con asolatura di registro Dimensions: 20mm 30mm 40mm 20x25x25mm 30x25x25mm 40x25x25mm 20x35x35mm 30x35x35mm 40x35x35mm 20x45x45mm 30x45x45mm 40x35x35mm 20x55x55mm 30x55x55mm…
Wanted a bit more of a sci-fi feeling for the Smiley. UPDATE Updated some missing files. Thank you to a few people who commented about it so the site pinged me. Updated the knob to include a rest for the spring. It is a 5mm deep channel…
The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks
Make sure to print in high temp material like ABS
In this publishing I have included stls for 2 designs for the Carburetor adjustment tool. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in any way you…
Bmw e30 msport seat adjustment knob.
Easy and quick adjustment of your P.I.N.D.A.-Probe Purpose: This tool replaces the “cable-tie-method”. That's what I designed it for. Instructions: Simply put the lower plateau under your printer's nozzle and rise / lower your P.I.N.D.A…
Bed Screw Adjustment Tool for QIDI Plus 4 No Support needed.
This is a work in progress! This is a model of the images found here: https://www.reddit.com/r/Coffee/comments/tfp8gg/timemore_possible_upgrade/ I used their images to make this model. You can then go on Shapeways and order it in whatever…
This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm
I made this fixture as an alternative to an E-Type bracket. Although originally intended as a softbox/reflector holder, it can be used to join any two tubes with diameters of 8mm and 16mm. It has 32 angles of adjustment (11.5 degree…
There are already a couple designs on Thingiverse, in fact this version is based off of Bompe's ( https://www.thingiverse.com/thing:4147266 ) but redrawn from scratch. I wanted a fully printable version without the need for any other…
Original author's part with a sight adjustment hole added to the motor part. Please reference the original part for all build instructions and related fastener hardware required.
I made ironing test and ironing flow adjustment models, a single plate contains round hole test, flat slope ironing test, and curved slope ironing test, depending on settings,a single plate should take 2 - 3g of filament, a single plate…
Printsettings: Nozzle 0,4 No raft 20% infill 0,2mm layer height ironing - off
[Update 3 JULY2025] CenterUnit_v2.stl LowerAzimuthPlate_v2.stl //Modified clearance for bearing UpperAzimuthPlate_v2.stl //Modified clearance for bearing and change M4 to M5 for adjustment parts. I have made a type of Polar Fine…
Modified hinge for the Flashforge Adventurer 5M body with the possibility of adjustment
I added a Raspberry Pi Camera Module 3 to my Prusa Link setup (Raspberry Pi Zero W), but I was unhappy about the focus of the image. You can easily adjust the focus of the image by turning the front lens. I recommend to start turning the…
Print in at least PETG or ABS or similar I designed this model to test out various spring tensions on the x-axis to facilitate ringing adjustment tuning without making permanent invasive changes to the printer hardware that can void…
This is an adjustment knob for the Dillon powder measure bars. No need for a separate tool to adjust the powder throw. The knob includes information indicating how to increase or decrease the amount of powder thrown. Print Settings…
Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 3mf is…
MMU3 Chimney Modified for PC4-M10 Fitting and Spring Loaded Sensor Adjustment. I used the M10 fittings with my MMU2 because it made it easier for maintenance so I made this for the MMU3. I also loved the idea of Cdbugess's spring loaded…
I've printed it in ABS as car can get quite hot in the sun, on the picture there is a fuzzy skin option used but printing next time I'd skip that, the effect is not even close to the original facture
Side mount LCD Display on your Prusa MK4 or i3 MK3S - (left and right) with adjustment. The design allows you to position the LCD display on the left OR right hand side of your printer frame and gives a reasonable amount of swivel…
Exact angle trowel adjusts to suit the task you are working on from 90 to 160 degrees. Thank you for every review, like and donation, It motivates and helps to implement new projects! Print Settings Rafts: No Supports: No Resolution: 0,2…
Microstomia can impede eating, speech, dental cares, and surgical procedures (intubation) and are a common issue after sustaining a face burn injury. The orthosis was originally designed by one occupational therapist and one physical…
Maple leaf cuckoo clock pendulum with fine adjustment screw regulator. Simple assembly. Slide maple leaf on stick, screw on nut underneath maple leaf. Start with the nut around halfway up the stick, adjust up and down to regulate the…
[Updated: 19 July 2025] All screws and bolts except one M8 have been unified to M5. (Side1_v4, Side2_v4 and AZ_Top_v4) The altitude and azimuth adjustment section has been enhanced. It is now stronger. (Side1_v4 and AZ_Top_v4) [Updated:…
Tray to store the bed adjustment sheets so they stay flat. Thanks to Uncle Jessy for the inspiration.
Mirror adjustment gear AUDI Q7, Volkswagen TOUAREG, Hummer H3
New solution. This way the gadget should fit more machines. PETG might work. PLA not. Best to print with some more flexible materials like TPU or PA. For a long time I used a device made out of rubber and aluminium to solve this issue…
I got sick of my CPAP mask sliding up off my head every night because the headgear doesn't actually hold onto anything at the back of the head. This adjusts the angle downward so that the headgear can cradle the base of the skull and is…
Ford N-series Tractor Hydraulic Adjustment Jig. The adjustment jig is based on the Nuday HG 101 jig that was used by Ford service mechanics back in the day. Zane Sherman took the measurements, for for almost 2 decades sold the "Zane's…
100% infill, and simple support needed.
Table Adjustment Knob M3 - M4 Links to materials: M4 X D6.0 X L5.0 M3 X D5.0 X L4.0 M4-4mm M3x5mm Ultra Base 3D Printer Platform Links to used tools: Ceramic tweezers Mini clamp Textolite Scalpel Trammel Tool Countersink Soldering iron…
This is a tall slanted humbucker ring for an archtop guitar with a 2 hole pivot / tilt adjustment. (Hard to find in the wild)
Based on the original design by Cor van Doorn. Opulo moved the cameras in Z between v2 and v3 machines. These tools provide reach to access the recessed Bottom Camera, and also allows for adjustment of the Top Camera when using my 4mm Top…
