Wyniki wyszukiwania: b220

Sortowanie

148 modeli

P
PrintablesJ

BTT SB2209/2240 XT30(2+2) Replacement Shell

I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…

Pobrania
240
Polubienia
57
Ocena
5
P
PrintablesDET-Man

Cable Bridge PLUS for SB2209 / SB2240

Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…

Pobrania
2629
Polubienia
33
Ocena
0
P
PrintablesDET-Man

XT30 2+2 Plug for SB2209 / SB2240

A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…

Pobrania
2274
Polubienia
35
Ocena
0
P
PrintablesCondorman

SB2209 + PG7 Stealthburner Mount

Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…

Pobrania
1429
Polubienia
97
Ocena
4,85
P
PrintablesOD_ESS_IT

Voron Stealthburner Cover EBB SB2040 / SB2209

UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…

Pobrania
1405
Polubienia
144
Ocena
5
P
PrintablesNyxCode

PG7 / CNLINKO LP-12 mount for SB2209 / SB2240

Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…

Pobrania
1152
Polubienia
96
Ocena
5
P
PrintablesArek

Voron StealthBurner SB2209 / SB2040 misalignment protector

BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…

Pobrania
1095
Polubienia
210
Ocena
4,9
P
Printablesjmillerfo

Stealthburner BTT SB2209 CAN Bus Toolhead System/Filament Cutter

Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…

Pobrania
942
Polubienia
128
Ocena
5
P
PrintablesNortonTech

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS

V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…

Pobrania
832
Polubienia
106
Ocena
5
P
Printablesjeronbernal

BigTreeTech SB2209 SB2240 PCB Fan

Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…

Pobrania
830
Polubienia
118
Ocena
5
P
PrintablesTowapa

SB2209 / SB2240 mount for PUG - New Plug

Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.

Pobrania
784
Polubienia
84
Ocena
4,83
P
Printablesmariusbach

G2E (Galileo 2) cover for Canbus PCB (SB2040, SB2209 and similar) and 30x30 (3010 or 3007) fan

In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…

Pobrania
739
Polubienia
92
Ocena
4,8
P
Printables3DXman

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount

A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…

Pobrania
665
Polubienia
104
Ocena
4,5
P
PrintablesPierre

Voron 2.4 - Stealthburner with 3DO nozzle cam & LGX lite & BTT SB2209 & umbilical mod

Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…

Pobrania
653
Polubienia
103
Ocena
5
P
PrintablesMike F

SB2209 / SB2240 mount for PUG

Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…

Pobrania
626
Polubienia
81
Ocena
5
P
PrintablesSven Kah

Voron Stealthburner EBB SB2209/2240 fan cover

This is for the original version of the CW2 main body, won't fit BTTs variant.

Pobrania
624
Polubienia
65
Ocena
5
P
PrintablesArnoldstrife

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide/support.

Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.

Pobrania
619
Polubienia
62
Ocena
5
P
PrintablesLittle

SB2209 / SB2240 - CW2 Cable Bridge, PG7

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…

Pobrania
585
Polubienia
80
Ocena
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief

Remix to add support for the connector as well.

Pobrania
537
Polubienia
57
Ocena
5
P
Printablesjeronbernal

Galileo 2 3007 SB2209 / SB2240 / SB2040 CAN Bus PCB Fan

A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…

Pobrania
467
Polubienia
78
Ocena
5
P
PrintablesMJ JOO

Galileo 2 2507 Fan Cover for SB2209/SB2240

Maintain a unique style of Stealthburner. No screws reguired.

Pobrania
467
Polubienia
58
Ocena
5
P
PrintablesGonzoStrange

Updated CW2 EBB SB2209 Fan Housing / Filament Sensors for ERCF / Filametrix / Dragon Ace

CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…

Pobrania
459
Polubienia
65
Ocena
5
P

Galileo 2 SB2209 strain relief

Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.

Pobrania
439
Polubienia
48
Ocena
4
P
Printablesseage

StealthBurner - KNOMI - CAN (SB2209/2240) - CPAP - NOZZLE CAM

This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…

Pobrania
432
Polubienia
67
Ocena
5
P
PrintablesKieran E

EBB SB2209 updated CAN cable holder

It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!

Pobrania
427
Polubienia
30
Ocena
4,67
P
PrintablesBlueGooGluey

Stronger Hex Ventilated SB2209 SB2240 Door with 3007 Fan

Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.

Pobrania
398
Polubienia
50
Ocena
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover

Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.

Pobrania
375
Polubienia
45
Ocena
5
P
Printables3DeezNutz

Voron Big Tree Tech SB2209 RP2040 canbus cable support

*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…

Pobrania
372
Polubienia
50
Ocena
5
P
PrintablesTrogdor

BTT EBB SB2209/2240 Voron Vented Door

I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…

Pobrania
369
Polubienia
45
Ocena
5
P
PrintablesPapaGibby

BTT EBB SB2209 USB Mount

This is a multipurpose mount designed for the BigTreeTech EBB SB2209 USB 1.0. The EBB SB2209 USB comes with a small USB to CAN adapter. I was not able to find any suitable mounts for this small chip and thought I would try my hand at…

Pobrania
369
Polubienia
37
Ocena
4,75
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 ECAS

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.

Pobrania
361
Polubienia
33
Ocena
5
P
PrintablesHadrik.

Stealthburner CW2 EBB2209 CAN PUG (Umbilical)

Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…

Pobrania
352
Polubienia
44
Ocena
0
P
PrintablesGusk

Galileo 2 EBB SB2209 Cable Gland Mount + Lid

All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…

Pobrania
313
Polubienia
32
Ocena
5
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Pobrania
312
Polubienia
36
Ocena
0
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…

Pobrania
305
Polubienia
21
Ocena
5
P
PrintablesIxian
Pobrania
278
Polubienia
30
Ocena
5
P
PrintablesDaniel Hastings

Stealthburner LGX lite mount for SB2209, filament sensor and filametrix.

use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main

Pobrania
274
Polubienia
33
Ocena
0
P
PrintablesEcu3D

Voron SB + LGX Lite + Knomi V2 + SB2209

Please, print them in ABS, 4 walls and 40% infill. You don't need to change the orientation of the parts.

Pobrania
272
Polubienia
25
Ocena
5
P
Printablesthvardhan

SB2209 two PCB mount for orbiter 2 compatible with SB, TAP

quick way to connect two pcb canbus to existing orbiter 2. I had to unscrew orbiter motor and put it so that motor wire comes from the top and then insert it into sb2209 due to very short cable of the orbiter. You can use two regular…

Pobrania
270
Polubienia
44
Ocena
0
P
PrintablesCosmin

Cable door cover EBB SB2209 CAN (RP2040) V1.0 for Voron StealthBurner Clockwork 2

I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e

Pobrania
265
Polubienia
22
Ocena
0
P
Printablesbullitt168

Stealthburner LGX lite Mount with SB2209 (RB2040), Filament Sensor + Filametrix

I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…

Pobrania
263
Polubienia
38
Ocena
0
P
PrintablesChad Baker

Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)

This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…

Pobrania
258
Polubienia
32
Ocena
5
P
PrintablesDatura

BTT SB2209 Stealthburner Cover (Updated Remix)

This is a remix of a remix. I updated the Main Body uploaded by @MyStoopidStuff to incorporate the latest revisions from the Voron team. Please check the image if you are unsure if you need this part. The features in Red are the changes…

Pobrania
235
Polubienia
33
Ocena
5
P
Printablesjeronbernal

SB2209 SB2240 PG7/CNLinko USB Strain Relief

same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Pobrania
233
Polubienia
34
Ocena
0
P
Printablescyborgcnc

Stealthburner Fan cover for BTT EBB sb2209 (rp2040)

If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…

Pobrania
216
Polubienia
29
Ocena
4,5
P
PrintablesJohn Chatham

Stealthburner CPAP / Knomi 2 / SB2209 or SB2240 / 3DO Nozzle Cam / Rapido UHF

Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…

Pobrania
212
Polubienia
41
Ocena
0
P
Printablesdanio_298

SB2209 Large Gear Clockwork2 HGX (and FilamATrix alpha version)

A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…

Pobrania
210
Polubienia
27
Ocena
4,5
P
Printablesgedora13

Stealthburner EBB2209 (2040) PCB cover with 3010 fan

As many others, I've encountered high temps (above 85c) on my EBB2209 toolhead board, for Voron CAN (2.4 R2 Pro machine). I'm using Stealthburner with CW2 extruder and there was no option that suited my needs, which is CW2 + 3010 (24V)…

Pobrania
206
Polubienia
33
Ocena
5
P
Printablesarnaud S

Galileo 2 Bigtreetech EBB SB2209 USB

The EBB card with its USB socket on the front does not allow assembly with the standard body of the Galileo 2. The pcb displayed is that of a classic SB type CAN card. The EBB SB2209 USB card not having been modeled by Bigtreetech, I did…

Pobrania
195
Polubienia
25
Ocena
0
P
PrintablesYuya

EBB SB2240 SB2209 V1.2 Cable Cover Fan

With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers. This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan. Personally I'm running a…

Pobrania
194
Polubienia
14
Ocena
0
P
PrintablesTeah

Voron 2.4 A Drive SB2209/SB2240 can cable mount

I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.

Pobrania
193
Polubienia
24
Ocena
0
P
PrintablesShortbus

SB2209/SB2240 - CW2 Cable Bridge, PG7 w/ Cutout for Can Cable

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…

Pobrania
191
Polubienia
20
Ocena
4,33
P
PrintablesZanna44

SB2209 / SB2240 Cable Cover Hex shaped ventilation

Perfect model to print for having a lower temperature near the SB2209 or SB2240 to make them last longer. It also has hexes!!!!! In the near future will be out a model that uses also a small fan to keep the electronics even more frosty!

Pobrania
189
Polubienia
16
Ocena
3
P
PrintablesRuneLS

Stealthburner EBB SB2209 USB PCB cover with 3010 fan

I remixed the ventilated pcb cover for the EBB SB2209 USB V1 to mount a fan because the RP2040 kept overheating. Use 4xM3 heatset inserts and M3x14 screws to mount a 3010 5V fan, the fan can be plugged into the unused USB expansion ports…

Pobrania
182
Polubienia
23
Ocena
5
P
Printablesdeadlydayne

Voron Galileo PG7 mount for EBB2209/SB2240

This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…

Pobrania
181
Polubienia
17
Ocena
0
P
PrintablesHPFan

SB2209 SB2240 PG7/CNLinko USB Strain Relief

I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.

Pobrania
172
Polubienia
19
Ocena
0
P
PrintablesHornet331

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - Lower Switch FIX

In the original model the lower switch recess was slightly to shallow, the switch was standing out.

Pobrania
172
Polubienia
16
Ocena
5
P
Printablessalbang

Galileo 2 Bigtreetech EBB SB2209 USB Front Body and Cover

The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.

Pobrania
162
Polubienia
14
Ocena
0
P
Printablestidklaas

Galileo 2 SB2209/SB2240 CAN bus Umbilical Mount

Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…

Pobrania
162
Polubienia
19
Ocena
0
P
PrintablesApollo1298

Galileo 2 G2E Umbilical Cable Relief Mount Compatible with BTT EBB SB2209 USB

I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…

Pobrania
158
Polubienia
27
Ocena
0
P
PrintablesJordanJ

SB2209/2240 LGX lite mount

I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.

Pobrania
157
Polubienia
8
Ocena
0
P
PrintablesGateIron, LLC

Galileo 2 w/EBB SB2209 Inline PG07 Cable Support, CAN Bus - PG7 Gland

This PG07 type cable support is intended to be super lightweight, so is thin and requires a strong filament with good layer adhesion for best results. I've had no trouble with ABS, but others report some cases of breaking along layer…

Pobrania
156
Polubienia
22
Ocena
4
P
PrintablesDemond

Galileo 2 BTT sb2209 usb

this is a modified version of the Galileo 2 extruder front that allows the use of the bigtreetech sb2209 usb board. The original prevented the board to fit so I have adjusted a few areas to enable the board to sit correctly.

Pobrania
147
Polubienia
16
Ocena
5
P

SB2209 Fans (Canbus Board Fans - 3007fans)

More options for fan styles! These are for 3007 fans. Updated hex-pattern to be more rigid. Original design kept breaking on me. ASA-CF used in picture. Only print in ABS/ASA

Pobrania
146
Polubienia
30
Ocena
5
P
PrintablesCompyNG

Stealthburner SB2209/SB2240 misalignment protector for G2E

The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…

Pobrania
143
Polubienia
22
Ocena
0
P
PrintablesLev Ananenkov

ERF Filament Cutter G2E EBB SB2209 USB

https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I now export from…

Pobrania
142
Polubienia
27
Ocena
5
P
PrintablesBartosz Guzik

Voron Stealthburner CW2 BTT EBB SB2209 USB cover with fan

Remixed to fit different extruder frame (with angle cut at the botton)

Pobrania
133
Polubienia
16
Ocena
4,5
P
Printablesmuf83

PUG Mount for G2E (Galileo 2) Compatible with BTT SB2209 CAN

A very simplistic pug mount for g2e working with btt sb2209 can

Pobrania
132
Polubienia
16
Ocena
5
P
PrintablesBalázs Varga

Voron 2.4 umbilical mount for BTT SB2209 USB

UPDATE: I redesigned the toolhead side of the mount to prevent the break of cable. I printed in PLA with standard Voron settings, because I print only PLA with my Voron. Materials you need: -2x M3 heat insert (I used the standard Voron…

Pobrania
131
Polubienia
15
Ocena
0
P
PrintablesRedukt

XOL EBB SB2209 CAN (RP2040) - Mount

BOM: 3x M3 Tool head: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead Board: https://github.com/bigtreetech/EBB/tree/master

Pobrania
130
Polubienia
21
Ocena
5
P
PrintablesNozzle Wizard

Galileo2 BTT EBB SB2209 USB V1.0 Cable Strain Relief Support

To get the SB2209 USB to fit my Galileo2, I de-soldered the I2C connector and it fits perfectly. The cap-head bolt in this is M3x40, so you don't have to find an impossible M3x50. It has a zip-tie routed slot as well as steel cable mounts.

Pobrania
127
Polubienia
9
Ocena
0
P
PrintablesEchidnaEnigma

Cable Bridge for Stealthburner / LGX Lite / SB2209/2240

I wanted to use the wire strain relief instead of the gland ones, so I extended BTTs cable bridge to work with this stealthburner modification. Compatible with BTTs CANBUS cable clip with wire strain relief here:…

Pobrania
124
Polubienia
6
Ocena
0
P
PrintablesSinkha Meltdown

Voron CW2 cable bridge for BTT SB2209-RP2040 3hole

This remix is for common 3 hole cable chain whit heat set insert.

Pobrania
124
Polubienia
11
Ocena
0
P
PrintablesfreakyDude

Voron Stealthburner CW2 with ECAS for BTT SB2209 USB

ECAS PTFE tube connector added to Voron Stealthburner for use with BigTreeTech SB2209 I have adapted main_body, latch and cable_cover from Voron Stealthburner for BigTreeTech SB2209 USB. It may also be compatible with SB2209 CAN.…

Pobrania
118
Polubienia
18
Ocena
0
P
Printablesgrat_lol

PUG Mount for CW2 Compatible w/ BTT SB2209 CAN

Print this in ABS only, using Voron printing guidelines. No supports needed. Tested only on Voron Trident, but should be compatible with 2.4. Use the second part (black piece in the picture that clamps onto the PUG) from the original to…

Pobrania
116
Polubienia
7
Ocena
0
P
Printablesjv

Stealthburner Cover / external fan SB2240/SB2209

-this is the deeper/wider version of the cover ~48mm deep (front to back if you're looking @ front of stealthburner) -I use freecad, I've included that file, the STEP file and the STL for anyone that wants to keep modifying -if you're…

Pobrania
111
Polubienia
15
Ocena
0
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 3DO PCB cable cover

I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.

Pobrania
110
Polubienia
12
Ocena
5
P
PrintablesRPI

Ford Ranger/Mazda B2200 Oil Dipstick

Print laying down, some support is needed due to orientation. Use temp resistant material I used petg but i would suggest asa or abs. So far it held up. This was for a 2010 model check if others will use the same.

Pobrania
109
Polubienia
18
Ocena
0
P
Printablessmuk3d

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 Door Cover with Fan

my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug

Pobrania
107
Polubienia
17
Ocena
5
P
Printablessepoche

Clockwork 2 Main Body EBB (SB2209) + sensor filament

This is a remix between the official bigtreetech model and the Leiwandizer model, the difference is that the side cover is bigger and the body is different. It uses a micro switch and a 5mm steel ball.

Pobrania
103
Polubienia
12
Ocena
0
P
PrintablesHanz2508

CW2 main body - ebb_sb2209/2240 with filament_sensor

Download the updated version below: Filament runout sensor for Stealthburner with EBB SB2209

Pobrania
101
Polubienia
14
Ocena
0

Galileo 2 G2E PUG Umbilical Mount (support to SB2209 usb connection)

This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…

Pobrania
99
Polubienia
21
Ocena
0
P
PrintablesKinematic Digit

Voron Cable Chain Cover for EBB SB2209/SB2204 Mod

This is a new cable chain cover for the Voron Switchwire with the EBB SB 2209/2204 and cable bridge, CW2 and other upgrades. https://github.com/bigtreetech/EBB This cover allows the chain to move back on the gantry for more chain…

Pobrania
97
Polubienia
18
Ocena
0
P
PrintablesN1_3D_Printing

SB-KNOMI-SB2209/2040-UHF-LGX_lite

SB-KNOMI-SB2209/2040-UHF-LGX_lite (Yess i had a bit of Ringing)

Pobrania
96
Polubienia
19
Ocena
0
P
PrintablescNoe
Pobrania
91
Polubienia
15
Ocena
0
P
PrintablesCrazy

Large Gear Clockwork2 SB2209

Modified the original design a bit to better suit the sb2209 can board, also made the screw hole bigger for pcb cover.

Pobrania
89
Polubienia
7
Ocena
0
P
PrintablesCookiezRGood

SB2209 RP2040 Cable Cover - Ventilated

Same model as before but with a hexagonal pattern cut out to allow for better airflow to the board

Pobrania
86
Polubienia
15
Ocena
5
P
PrintablesJJ Irons

Stealthburner EBB2209 (2040) PCB cover with 3010 fan (No Logo)

Love the model but don't want the logo on the outside of my printhead.

Pobrania
85
Polubienia
16
Ocena
0
P
PrintablesPawel Lygan

Galileo 2 EBB SB2209 USB strain relief cable holder

The project has been adjusted to the EBB SB2209 USB board. Please use an empty PH connector (you should have spares anyway, delivered with a board) to isolate the piano wire from the port. Piano wire available on amazon My 3d design…

Pobrania
83
Polubienia
10
Ocena
0
P
PrintablesRJ Patawaran

Voron Stealthburner BTT SB2209 Thermistor Access

Modified both main body and cable cover to provide access to the thermistor header

Pobrania
78
Polubienia
8
Ocena
0
P
Printablespixel shock

BTT EBB SB2209 DIN Rail USB Mount

You will need 2 M3x5x4 Thread Inserts (for Voron): https://cnckitchen.store/products/made-for-voron-gewindeeinsatz-threaded-insert-m3x5x4-100-stk-pcs

Pobrania
77
Polubienia
6
Ocena
0
P
Printablescouperd

A4T Sherpa Mini SB2209 Mount

Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without…

Pobrania
71
Polubienia
11
Ocena
0
P
PrintablesHadrik.

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - larger ball bearings

Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.

Pobrania
70
Polubienia
7
Ocena
0
P
PrintablesTiMake3D

Voron-Trident Stealthburner CW2 Bambu-Schleppketten Halter für Canbus und BTT SB2209 RP2040

Es werden noch 2 Schlosserscheiben für M3 und eine M3x30mm DIN912 benötigt. Die zwei Schlosserscheiben werden mit einem leichten Fett oder Ölfilm belegt und zwischen Halter und Fahne montiert um ein reiben von Kunststoff auf Kunststoff zu…

Pobrania
70
Polubienia
23
Ocena
0
P
PrintablesOzuwara

Galileo 2 G2E PUG Umbilical Mount (sb2209)

Didn't like the other alternatives, so I made my own modifications to the design to accommodate the protruding USB-C port on sb2209 (rp2040). The only modified part is the mount. All other files are unchanged from the original.

Pobrania
69
Polubienia
10
Ocena
0
P
PrintablesRilmar

SB2209 CW2 Horizontal Cable Bridge, PG7

I wanted a pg7 mount to route the cable out behind the stealthburner, horizontally centered on an enderwire (switchwire) build. The pg7 cable does not run into the vertical extrusion on either side and is a decent route to push the…

Pobrania
67
Polubienia
14
Ocena
0
P
PrintablesCookiezRGood

Stealthburner Cable Cover for SB2209 RP2040

After buying and installing my SB2209 RP2040 onto my extruder, I realized that the cable cover didn't close. I tried to look everywhere but couldn't find an official version provided by BTT even though it is shown in the instruction…

Pobrania
65
Polubienia
10
Ocena
3
P
PrintablesHanz2508

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Pobrania
62
Polubienia
16
Ocena
0
P
PrintablesInsido

Voron Stealthburner Cover EBB SB2040 / SB2209 Remix

This was a remix of the original it did not fit my Stealthburner there was a 4MM gap missing and it would not fit so I added the missing 4MM gap for my Stealthburner so its fits perfectly now

Pobrania
61
Polubienia
10
Ocena
0

SB2209 USB can-bus cable holder

This allows the SB2209 USB can-bus cable to stay in place with a pair of cable ties.

Pobrania
58
Polubienia
8
Ocena
5