Liczymy pasujące modele…
***!Work in Progress!*** Seems to work fine lol. Feel free to try it and/or improve the design! I haven't shot the film yet, will give an update when I do. Waiting for better weather… UPDATE: so I developed the film and it seems that…
Small Box for most common backing utencils fitted to package sizes.
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
Small Box for most common backing utencils fitted to package sizes.
I wanted to mount 2 UHP Power supplies and I didn't have tools to tap new holes in my Bakelite electronics bay base I used these as both a drill template and a mount. Drill 4 holes for one end (2 per power supply) and use the power…
Inspired by a true story. At TITC 2026, Bruno Cohelio lost his rear wing mid-race and ended up in the wall. This small part exists so that never happens to you. These oval backing plates sit between the screw head and the lexan body,…
Allows for the attachment of velcro into a Jansport Fifth Avenue fanny pack. Also makes the bag stiffer and hold its shape. To get honeycomb pattern, print with no top or bottom layers, ~25% honeycomb infill, 2 infill lines, ~25 walls. I…
A slight change to the original model designed by Jose V. I removed the back side so that you are able to see the wall
Synthead's chamfered logo remixed to include a solid backplate. I used this to add a logo to the Printable electronics cover for E3NG v1.2 by Nmorelm.
Replacement pin backing with tapered hole for a snug hold. Hole has an internal depth of 6mm Prints well with PLA
Our Embroidery Backing Holder is designed to simplify your embroidery workflow. Say goodbye to struggling with loose backing materials and hello to a more organized stitching experience. This holder securely holds your embroidery fleece,…
I printed this out of ABS on a carbon x1 Just a quick dial gauge backing plate because i coulnt find it Has 3 diff sized holes for my set ups , maybe yours
The origin was in brown, what was not more attraktiv after i paint the doorframe in white.
This works slightly better to hang a heavier object on - e.g. body scrubber in picture. I think the support is a little too thick for some cases, so if it doesn't work for you try thinning the “block” by another mm.
This is a new backing plate for this Spider-Man lamp. Directions: Print the original model middle piece, and top piece. Print the backing piece from this model. Optional: super glue some foil down shinny side up. Insert the lamp through…
I printed this at 0.2mm in sainsmart black tpu. I just wanted this to look more like the lower decks badge if I was going to wear it. Keep in mind this won't snap into place - you'll probably want to use double sided tape on the inside or…
Show off your branding! Got bored one night and decided to be semi productive and make a few magnets for different things. Magnets are printed INSIDE the object, using 20x10x2mm magnets. Can be found easily on amazon.…
This is a crude replica of the clear plastic piece that backs large command strip hangers. I printed mine with supports on the tab. Be very careful when cutting out that support.
These are backing for the R170 SLK Deco aftermarket headlights to replace the rubber membrain backing in case you need more room for something like LED headlights. Would recommend printing in ABS and then putting a screw through the print…
I use these to insert a sleeve nut intoas a kind of backing plate for an m5 bolt.
I had the fabric on a canvas bag fray around a magnetic bag clasp, causing it to fall out. This piece was designed to slide in between two layers of fabric without having to unstitch them, to give a rigid backing to fold the tongues of a…
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
Sometimes an adhesive strip isn't enough. You still want to use the hook, but need a stronger hold.
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
I built these backing plates so I could use double sided tape to mount a set of Linkitom LED flashers on a mower without having to drill holes. The backing plates get attached to the flashers using M4 cap head screws (8mm - 10mm). Reliefs…
I've been on the lookout for a handy way to store baking powder or vanilla sugar, but haven't had any luck finding the right thing. These dispensers are a breeze to fill from the top, and you can grab individual packets from the bottom.…
Various clock backings for the magnets and windings I already have. Some for 170mm or larger prints, others for anything bigger than 90mm. Some for attaching to walls from the winding hook, some with built in nailers. All have magnet…
Youtube playback keeps defaulting to low quality. Please manually select 1440p when watching. https://sketchfab.com/3d-models/hexagon-wall-shelf-funko-pop-custom-backing-717b28b1d6884ed3a78fd84e2b713bc4 A quick and easy to print custom…
Print in a set of 4 or any number you like. Add an optional sticky-back piece of cork to the underside of the drink coaster to help keep it from sliding.
π (Pi) drink coasters…print in a set of 4 or any number you like. Add an optional sticky-back piece of cork to the underside of the coaster to help keep it from sliding.
Ethereum cryptocurrency drink coasters (standard size). Add an optional sticky-back cork piece to the underside of the coaster to help keep in from sliding on the table.
This is a remix of Coiling Backing Plate Cover to allow it to be printed correctly with a 0.4mm nozzle. Original : https://www.thingiverse.com/thing:3006071 Printed part list (2) 1 x CoilingBackingPlateCover : Layer:0.15mm Raft:no…
This is a re-creation of the Scotty 441 Backing Plate. It is used to add structure behind 241/244 4-bolt mounts on thin-walled vessels. You can also use it as a spacer, which is what I use it for. Printing Recommendations: Print with ASA…
For the magnet backing, print the two parts without supports, then glue the flat sides together with super glue. For the lens hole filler, place this piece into the case before putting the lens in.
Using the KegLand Cannular Can and Bottle Filler is a great way to speed up your filling day, but if you don't have a permanent place to set it up such as a wall it can be a bit tedious to have to fashion something. I bought an Amazon…
The solar panel used works quite well and will produce a normal charge outdoors and in a very well lit room on the 2 phones I've tested it on (I don't have a CMF phone, yet) Easy to print and easy to assemble. You can repurpose a charging…
Loved the original model so I remixed it to add heated inserts to the carriage and backing plate. There wasn't enough meat around the belt mount to put inserts so these remain as threaded into the plastic. You will also need the locking…
A slim model at just 3mm to hold your photos in place on a frame
For the player mat: When doing multi-color printing, select color to match name of the parts in the model. For single-color printing, do not print the “white”, “gray” or “black” parts, which will open windows for the cards which can be…
Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…
UA-G2-Lite UK backing box adaptor/faceplate
Modernizing the Cinetape backing. Can be printed at an angle or with interior side down, both needs supports. Tolerances are fairly tight, so best to calibrate your filament. Gasket is meant to be printed in TPU. Everything else…
sanding and polishing backing plates that directly mount on any rotary tool added soft versions for fine polishing you may need to scale down the parts about 2-3% in case the fit is too loose
This is a simple 3D-printed filler block for mounting a Eufy E340 camera on rusticated brick walls where the top half of the mount sits over a recessed brick course. The bottom half of the mount already sits flush on a protruding brick,…
Print as you wish, it will be hard to have it wrong
These templates can be used in many ways. You can print them out as-is, and then just glue them to whatever you want to attach to your Skadis. You can also import them into your design tool to merge them into your model. No need to…
A parametric hook with a flat backing plate, designed to be mounted onto a flat surface such as a kitchen or bathroom tile using double-sided tape or glue. N.B. There's a (rather hilarious) bug where the hook looks flipped upside-down in…
Introduction This tool is used to apply paper backing from a 120 format empty roll onto a 35mm roll. The design allows you to pre-align the film in daylight and load in a darkroom/dark-bag. Now you can use the frame counter on the paper…
This is a Puzzle Table Screw Clip was created to work for a Large 34"x26" Jigsaw Folding Portable Puzzle Table. However, this Clip can be utilized for Large Picture Frame or as Picture Backing Clips. The Main Screw Hole is sized for a #6…
Multiboard Screw-in Straight Tweezer holder Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
I liked thericks idea of the umbilical passage, but I needed to adapt it to fit my thicker back panel (3 mm panel + 3 mm foam). The step is 5.5mm so the foam gets compressed a little. I also added a little strip to align with the slot in…
I wanted to mount 2 UHP Power supplies and I didn't have tools to tap new holes in my Bakelite electronics bay base I used these as both a drill template and a mount. Drill 4 holes for one end (2 per power supply) and use the power…
Test fit on a 1991 Honda CRX. Same part fits both sides of the car. I deleted my door cards in favor of racecar style flat ones. These cleaned up the look a bit and don't add much weight.
Rich's hinge was exactly what I needed to make ScottWolf's SKADIS Mod work for my CORE One, but I found installing the hinge to the CORE One frame to be difficult due to the limited interior access, dark back corner, and dark colored…
Helps you hold backing on hooping. Much easier to align. Remove before embroidery.
This is a remix of the Prusa Mini Displaybox Cover by 4inthonylin to work with the LCD Frame + USB for Prusa Mini created by Frank S I love this LCD frame modification that includes the USB and I wanted to create a backing cover for this…
I was designing Christmas ornament designs for 80mm / 3 inch hoops for an Advent Calendar stitch along. on my blog (hence the blurred design - it's a surprise!) and wanted to print some display hoops with an added back piece - so I…
Simple part to replace an A-13898 flipper backing plate on some Gottlieb pinball machines. On a pin I was servicing there had been a clear plastic backing plate for the flipper button which had split, allowing the flipper button to push…
I remixed this to be able to include space for a piece of glass easily obtainable by dismantling a dollarstore clock, I also made a back plane so now it's more like a picture frame. I plan on gluing it together, but you could easily add…
Nice earring holder, very easy to print 0.2 mm per layer Happy crafting and have fun!
you will need to use supports or slow the print for the hanging notch.
GME MB206/MB207 backing plate contoured to the dash trim in the Toyota LandCruiser Prado 150 for easy mounting. Both left and right side trim variant .stl files are provided, use the correct one for the side you wish to attach the mount…
Inspired by a true story. At TITC 2026, Bruno Cohelio lost his rear wing mid-race and ended up in the wall. This small part exists so that never happens to you. These oval backing plates sit between the screw head and the lexan body,…
Allows for the attachment of velcro into a Jansport Fifth Avenue fanny pack. Also makes the bag stiffer and hold its shape. To get honeycomb pattern, print with no top or bottom layers, ~25% honeycomb infill, 2 infill lines, ~25 walls. I…
A slight change to the original model designed by Jose V. I removed the back side so that you are able to see the wall
NOTE: This model only includes the toolhead, not a dedicated handle There are several historical methods for backing/rounding during the bookbinding process, such as backing hammers. This tool head mimics existing "Backing Tools" found…
Synthead's chamfered logo remixed to include a solid backplate. I used this to add a logo to the Printable electronics cover for E3NG v1.2 by Nmorelm.
A guard piece to fit behind the front hip skirts of M09 Commander Leader. NB This is the RIGHT SIDE piece - you will have to flip the model in your slicer for the left side. Due to the stiff joints, crisp edges, and die-cast construction,…
Replacement pin backing with tapered hole for a snug hold. Hole has an internal depth of 6mm Prints well with PLA
universal backing plate, mounts directly on the tool's spindle can be used with sanding pads, polishing pads, felt pads etc
This is a backing plate also called a friction plate for a Briggs and Stratton pull start claw. I printed it in PLA and seems to work fine. This was made using a 3d scan of a broken original and I recreated the bolt mounting hole in the…
I noticed some problems with the capsule holder sticking to the side of my kitchen cabinet with double-sided sticky tape. Therefore, I updated the original design to enable easier wall mounting. Removed the internal sliding rail and…
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
it works, but if I had to change a thing. I would make the walls thinner Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 but Doesn't Matter Infill:…
One of the clips broke off of my original HKZW-DWS01 backing plate, with no replacement available I decided I better design one (I've got plenty more of these things waiting to break during battery replacements). Link to discontinued…
This is a remix of the original. I added a rounded backing and border edge the design. I hope it is found to be useful.
Original fix for broken backing pad
Geneva brand steel kitchen cabinets were popular in the 50's. They featured a low profile cabinet handle that required a recess behind the handle. This was made of plastic. Today, these cabinets are popular for retro style kitchens. The…
Seadoo Fishpro Garmin Backing Plate for the terminals of the Garmin FishFinder..
Simple remix that adds a base to the original, making it more durable. The downside is that it's only viewable from one side. Add a colour change to make things stand out. Category: Keychains
Quick model of the combadge from the CBS All-Access show Star Trek: Picard. This model uses 8x3mm magnets to allow you to pin this badge to clothing. Just print out the model and pop the magnets in! Check out my Amazon Page to see what…
I've added the IKEA Skadis pegboard backings, extracted from CNC_Maker on thingiverse here (which I've printed before and love how snug the fit is) to RemiRafael's awesome modular enamel pin display so I could decorate my pegboard with my…
Aaron Rhodes made a really nice DS9/VOY/TNG Movie era combadge . UnimatrixRed went a step further and made a magnetic back for it along with a sweet display stand . But, unlike his TNG era combadge, he didn't make the adapter to let it be…
I loved the original model but the foot was just a bit too long to fit into my Milwaukee M12 Rover handheld floodlight. This remix shortens the “back” of the foot so it's compatible and the battery now fits into the tool correctly
Picture frame turn button to hold the backing on to a picture frame. To be used with a #6 screw.
A solid 1mm thick layer to add to the swatch design for translucent colors. 2 versions, 1 for a solid color (white or black work well to contrast the color layers), and a split version for those with a material system that can handle 5…
When I printed the Letter Board, I had to scale down the frame to 185mm x 135mm x 12mm, but the board itself wiggled around. This backing has just enough to be snug and keep it in place (with the help of some glue). Also fixed the Q piece…
This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…
So, I can be a bit of a klutz some times. I broke the delicate white plastic backing piece that retains the standard detachable trimmer blade to my Wahl rechargeable cordless trimmer. It was like $8-$9 to buy a replacement. I decided to…
This TMNT comic book stand backing can slide into a comic book stand that allows for backing/plate changes and can also be hung on the wall and used as wall art. If you are obsessed with Teenage Mutant Ninja Turtles then I think you'll…
Removed the lip as I couldn't get the 10mm led strip to slid in. This isn't an issue if the LED has a glue backing for easy application.
The ultimate protective cap for the Fein Multimaster sanding pads. Easy to put on and effectively protects the Velcro fastener of the sanding pads during storage. There is one model for the thick sanding pads and one for the thin ones.…
Early Kickstart-era Bambu Lab X1/X1Cs featured double-sided tape to mount the fan to the inside of the case shell instead of screws in later builds. After doing a repair, I found it difficult to get the new double sided tape to stick the…
I wanted to mount a 4" exhaust duct through a casement window to vent ABS fumes from my printer, so I made this backing plate for https://www.printables.com/model/474337-120mm-fan-to-4-inch-duct-f3d-file-for-other-sizes so that I could…
Building off of dylan's design, I threw together these backing plates, allowing me to attach the pannier hooks to anything that may not have a reliable enough surface to mount on. For my purpose, I used these to connect the hooks to some…
