Liczymy pasujące modele…
The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a costume wrench for unscrewing of the cap that keeps on the handle bars on ROG pony. It works but must be printed from good materials because the little pins can break off when you try to screw it down. PLA is not good enough !!!
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
After attending an ISLE workshop, I thought it would be fun to design some vector arrows such that they could change length. Here is the design I cam up with! The design includes an embedded magnet, which should be inserted before the…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
Can't forget about my Warrant Officers in the US Army! If using PLA, I recommend resizing the blocks to 98.5% so it can fit snug/tight without using glue. In my opinion, it just looks better to insert it tightly than to glue it in. To…
(For smaller illustration models, look here: https://www.printables.com/model/675613-steel-profiles-illustration-models ) All STL files are according to standards shown below. Print info: - All stl's are 100mm in height - Print upright,…
The Paperwhite is very light weight but very hard to hold. These grab bars solve the problem. I liked these 2 designs, but they didn't work for me. They inspired me to create a new model.…
Simple little lightbars to house a 10x200mm LED strip. Perfect for enclosures. I was unhappy with the original lighting in my Ikea Lack Enclosure because it was misplaced and left the hot-end in shadow. These simple little lights fix the…
You'll need to drill the holes a little bit bigger to fit the bolts through… or adjust the hole size to be bigger. As the Wahoo bolt spacing and the GoPro bolt spacing is very slightly different.
Designed a throw lever for a Barska Colorado 3-9x40 scope. I use this with a Daisy 880 shadow. I've created 2 versions for people to use, as I noticed the length of the longer lever was close to touching the stock end, so I really…
First go here and print the Extendable Protest Sign Handle (I am not duplicating their work here), then print the crossbars that fit your needs. Sign top no prop: fits on the top of the rod. It has some holes for a zip tie but it's a…
I printed in PETG 0.3 layer height 50% infill. For best fit, scale at 95% (X & Y) The model is 40mm high, but you can scale Z height however you like
I have published a major redesign with flexibility and handle 250/500g spools. The legs are sized from 125mm to 275mm in 25mm increment: Variable Height Modular Filament Storage Rack (1/2" EMT) There are many great filament storage rack…
I made these handle bars so I can push my kids on the scooter, I have been using these for couple months and they work great, without any failure. You can easily remove the handlebars with allen key when not in use. I DO NOT recommend to…
My capswap adaptation for the Corsair Dominator. Features a design inspired by the classic look of Corsair hardware, complete with the older logo.
General RAAM is gonna get you like Minh Print on 2 plates in my orientation or combine the files on one, that's up to you.
I took the universal design of the light panels from the death star and added them onto these RAM top bars
For checking fitment before buying the machined version
Summary: I crashed my bike with my new Rocbros R0 handlebar lights the other day, ruined one of the mounts that is made from aluminum. Decided to remake the working one in FreeCad, worked like a charm, perfect fit. Now I can keep using…
For Harleys with 1-1/4 in Handlebars Phone Mount Adapter for common 25MM Ball phone mounts. Requires 2xM4x16mm cup head screws and 2xM4 hex nuts, uses the ball adapter and securing screw from your mount. Two versions to print vertical or…
Need to hold down your thin materials to your laser bed? Need to flatten them out and secure them? Me too. One bar is about 4" long the other nearly 8". One side has a 1/16" lip that fits leatherette perfectly. The other 1/8" for thin…
RADTEL RT-950 ,HIROYASU HI UV-850pro, BAJETON BJ-9000 bicycle holder for handlebars from HF7POL
This is a Gridfinity tray for the Kreg Precision Router Table Setup Bars (PRS3400). If you want to get fancy, you can use the slicer to change the color at the second-to-last layer to make the embossed sizes pop. Printed in PLA with 10%…
As an ol' guy, I needed more light to see into the dark cavern of the K1C. I first built Joe Coopers excellent hinged lid to get access for filament changes. When I started to figure out where to put more light strips, I realized the only…
The model is connecting part between standart sp connect part and standart rubber part(can be replacet with piece of rubber). The part is ment to be secured to handlebars with zipties (2.6mm)
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
16.1mm diameter bar legs. Raises the bottom of the stool up to bumper height of your Roomba. Requires a 9/16 hole to be drilled into the base, so it doesn't move or rotate. I added some epoxy as well, just as a bonus. You can break off…
10mm channel negative space added so 10mm LEDs can slide into the channel securely without the adhesive.
These press-up v-bars have been used extensively in the gym and at home, for muscle growth, I developed these when there was nothing available out there that suited my needs. Hope everyone enjoys them, please feel free to let me know how…
A simple mount for the runleader or similar Tachometer to fit 7/8 or 22mm Handlebars. Required: 4 x M3 x 10mm bolts 2 x M3 washers 4 x M3 Voron heated inserts
When the replacement feet for my local Pubs barstools became unavailable from the manufacturer, I designed these cushioned but durable replacements. The TPUs properties truly shine in this application. These pads were designed for…
Turn your telescope into a display piece and reclaim your living space! The Problem: Every amateur astronomer knows the struggle: Telescope optical tubes (OTAs) are bulky, take up a lot of floor or closet space, and often get in the way.…
Rigid handlebars so your children can ride with you, my daughter rides with me sice 2,5 years. 100% infill, I do use PETG. What bolts and nuts do you need? 2 x M8*50mm, hex head 2 x M8 nut 2 x M4*15mm bolt 2x M4 nut It is a good idea to…
For this project I used PETG and TPU. This model is designed for you to split this object according to your bed size. UPDATE: Removed bottom lip x1 and made the feet less of a black hole for glueing by updating Tray x1, Front feet x1 and…
I printed in PETG 0.3 layer height 50% infill. For best fit, scale at 95% (X & Y) The model is 40mm high, but you can scale Z height however you like
I recommend using: PETG, TPU, ABS
Schachtel für 12mm Bohrstangen. Das Unterteil ist entweder für die Aufnahme der originalen Holzhalterungen oder mit Löchern ausgeführt. ................... Box for 12mm drill rods. The base is either designed to accommodate the original…
Schachtel für 18mm Bohrstangen. Das Unterteil ist entweder für die Aufnahme der originalen Holzhalterungen oder mit Löchern ausgeführt. ................... Box for 18mm drill rods. The base is either designed to accommodate the original…
These are 3d printable versions of the priming bars for the metric version of the SLAB . These were designed to fit the Ender 3 printbed (and probably a Prusa 3? If not let me know). The short one required no modification since you can…
Holes added on the bottom for M4x8 threaded inserts
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
After printing this spool holder I had the issue, that the pieces did not attach to each other just by friction, when l loaded some spools the rack got pushed apart - see the picture without the support. So I designed an additional…
Longer version of spool holder that comes with mini.
Push-Up Bar A simple Push-Up Bar for home gyms. Don't use filaments with fibres, since those might hurt and irritate your skin. Only use for Push-Ups and at your own risk. For the safest and best experience use sturdy and durable…
This box is for packaging the original brass ballast bars for the JS3 from Baudis. It fits four bars, each 15x20x150mm. The upper and lower shells are printed separately and connected by a hinge made of 2mm spring steel rod. The seat of…
This box is for packaging the original brass ballast bars for the Ambrosia F3X from Miro Model. It fits four bars, each 14x14x211mm. The upper and lower shells are printed separately and connected by a hinge made of 2mm spring steel rod.…
I bought cheap 3 leds modules and added in sets of 3, connected them in parallel and got this LED headlamps that are very bright and usefull.
I designed a bracket to merge angle bars in a corner. In my case it is for the enclosure of my 3D-Printer. I used 20x20 mm plastic angle bars in black. The brackets are fixed with countersunk screws. The screw holes are prepared. You can…
Having had problems with other similar designs, I built this wall mount from the ground up to be more secure with heavier bikes or, in my case, on drywall. For each wall mount you need to print two pins which you screw securely into the…
Reproduction of the Snag Bars safe-d - Anti Ejection System from Delkim, simply add the bars (metal rod) 4mm in diameter and 106mm long. Reproduction du Snag Bars safe-d - Système Anti Ejection de chez Delkim il suffit d'ajouter les…
Garage door remote holder for motorcycle handlebars (22mm.)
This mount is designed for seamless installation of the Govee RGBICWW Light Bars using a standard 100×100 VESA pattern. It provides a sturdy and practical solution for integrating light bars with your monitor setup. Key Features: Easy…
This is a remix of the wall mount from @fabiankirchen with a optimized pin mounting system. I recommend to print the main part with the flat (front) side down, 5 wall loops and 50-70 % gyroid infill. No support needed. Please also see the…
These various sized soap bars were created for use in displays. Sizes are based on historical soap bars (Pullman) as well as more modern soap bars. Also included in files: Pullman Soap wrappers - .pdf file of 6 “cut your own” wrappers.…
This is a real playground for your phone and/or headphones! To print it, you need five 18cm/7,1" beds. As you can tell - it's a lot of printing, but just look at the result! How fun! My recommendations for top quality settings (18cm bed,…
I needed a barstool, so I made a barstool… CAUTION: Even in PETG, this is NOT as durable as “production plastic” - proceed at your own risk. I've been sitting on it for a little while, including rocking out a bit with a guitar in my…
I like the design of the original but they were too long and too far. Remixed them so they fit closer the Isuzu body. Category: R/C Vehicles
I found the lid on the dryer did not give a very good seal and if you pushed down on the top the sides of the lid splay out. So i made this repllacment lid and sidebars which acccomodate a 3mm thick strip of rubber and provide a tight…
Designed a Travel Soap Holder for Yeti Soap Bars. Measure the Yeti box first, put my numbers on paper and then moved it to Fusion360. Printed on the Creality K1 in Ender Fast Series PLA Filament.
KLICKfix bike antenna for 35mm handelbars + stepfile to make own size if needed if printed in petg it should be flexible enoughto get it on the handelbar. print with 9+ perimeters to make it as strong as possible.
Printable priming bars for the Aeon Pro Pump kit for use with lower powered springs and stock spring. 170mm for the short dart pump kit. 100% infill and 5 walls for variation.
This is a simple crash pads for the OEM 25mm crash bars of the Tenere 700, to save scratches on the black paint of the bars if the bike is dropped. 0.2mm 100% infil, supports
Many stock mobile phone handlebar mounts i tried are quite high and thus less stable during the ride. I wanted something as close to the mounting bar as possible, also i wanted it mounted on crossbar, which is much thinner than…
These LED tea light lamps cast exciting shadows on the wall with their 24 pillars and create a cosy and contemplative lighting atmosphere at Christmas. Available in three sizes: Small, Slim and Big All versions are available as a…
This is a quick and dirty hook for shower slide bars of 17mm diameter. Not very pretty but a working solution. For other rod diameters you easily can resize it in your slicer software. Have fun!
To assembly you will need M4x20mm socket head screws and M4 nuts. I designed so that you would need no supports. There are two types of the outer parts.
Replace the standard red or silver trap bars in your new Two In The Box ghost trap. There are two versions of the file, one for GB1 (with the notch) and one for GB2 (no notch), these simply clip in. Some caveats to using these: - Only…
Somehow the strips covering the channels in the underside of our Thule Wingbars went missing. It turns out that above about 65mph, the car makes a very loud whistling noise without them. It also turns out that they're reasonably expensive…
Print Settings (Should be in 3mf project file): Material: PETG - PLA will stress fracture over time and PETG hinges more nicely Layer Ht: 0.3 mm Perimeters: 3 Top Solid Layers: 6 - Helps with waviness from the default 4, purely aesthetic…
Drill/Marking Template for a New Handlebar with a Hole Diameter of 3 mm
My first upload to Printables and my first solo design and export from Onshape. Used on HT-A5000 Sony soundbar Outside Legs: An “i-beam” style support leg, two of these were placed under each end of the bar and hold the majority of the…
180mm printable bars for PalmtopSupply's Aeon Pro Pump Kit - Full Length version Print with 4+ walls, and high infill
I modified this Yakima adaptor to work with the bulky Rivian OEM cross bars by assembling it with the mount created by Tinker86 on Thinkgiverse (https://www.thingiverse.com/thing:6533914). It is designed to be used with standard insects T…
Simple, useful and functional design to raise the redshift quick release aerobars. I printed it in PLA and I had no problems in assembly, if you need more security you can use PETG or ABS. It is 15mm high, if you want to raise it to 30mm…
Small drain-able travel cases for bars of shampoo and conditioner. This box can hold up to a bar which is 57.6mm x 37.2mm x 57.12mm. Print at 0.2mm with honeycomb infill of 25% and not top or bottom solid layers either in the lid or in…
Not a terrible lot to say - just some blanks for those of you that want to make your own versions.
Print three time and fix it with plastics collars. ( for 8mm bars ) For me 30% infill no support pla.
Motivation ebikes generally have a bunch of things mounted to the handlebars, which are typically flat unless it's an electric road bike these often include brake levers shifters controller computer throttle front light the easiest way to…
I found this great model for a travel soap container, but I wanted the inside to have bars instead of the bumps, so I added them.
Fits 180mm x180mm beds. One color change at 1.8mm. White then black. Centimeters and inches side by side with my logo. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop
Modified from the in-game model. Split into parts, made mostly wearable, cleaned up, and made suitable for printing. At the time of uploading I havent printed it yet, but have it sliced fine. No loops for a strap, but should be fine to…
Refer to the original model for more infos. Modified Spreader Bars: Sizes range from 143-402mm for the version without the middle hole and 175-443mm for the one with the middle hole. 3 Units larger and shorter than the original one, with…
This model is compatible with the lego system.
Vixen dovetail bars for ZWO Seestar S30 and S50 smart telescopes. I made these in both 60mm and 90mm lengths. The 60mm lengths are good for most of the EQ wedge adapters on the market and the 90mm length is good for the William Optics EQ…
This is a mold for creating chocolate bars for the mycusini 2.0 chocolate printer. Use foldback clamps to hold the mold together Use foodsafe filament (e.g. FDA-approved PETG) for printing Use 0.1mm layers for less sticking of the…
This model is compatible with the lego system.
I have published a major redesign with flexibility and handle 250/500g spools. The legs are sized from 125mm to 275mm in 25mm increment: Variable Height Modular Filament Storage Rack (1/2" EMT) There are many great filament storage rack…
I think the original desing is great, but since my desk is so close to a wall, lightbars pointing directly to the wall are giving less light than they could. So I added possibility to adjust them vertically. In addition I needed one that…
I use this clip holder to keep my laundry organized. It clips around the 20mm bar with 1 lashing strap.
Set of round bar connectors for rods with diameters between 5mm - 40mm Features: Press-fit of the round bars Countersunk screw locking holes Holes for tensile force absorption Customizer:…
Ich habe es an meiner Simson für die GoPro Hero12, es geht aber auch für jegliche andere Action Kamera. Es werden dafür jeweils 3 M5 Muttern und Schrauben zum befestigen benötigt.
![Wahoo Mount for Aerobars [parametric]](https://media.printables.com/media/prints/adcf97cd-4f21-4667-adeb-4e3b9f951e91/images/10376479_36ca1252-17dc-44fd-adc6-a93c78e58985_07e9ad91-3dc2-408a-840a-005ac331612b/2025-08-03-21_46_18.png)
![[Corsair Classic] Dominator titanium top bars](https://media.printables.com/media/prints/6a63543f-70a7-4806-8773-38b94de5cd5d/images/10141047_e58de986-d2ad-40f6-9071-608778b9d75d_091fcff0-3046-4b46-9b60-e3a08109641c/20250702_131859.jpg)
