Liczymy pasujące modele…
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
K98 Style Bayonet Lug for MLOK Interfaces. Print orientation and supports as shown MLOK nuts required If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
This a new design for a bayonet adaptor for the designer moon lithophane lamp model. I wasn't happy with the provided ceiling adaptor STLs as they didn't fit the standard NZ bayonet fitting (Too thick, so there was not enough thread to…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
These containers come in sets of 6 which fit into each other, so they can be stored efficiently. The sets differ in their heights. use a bayonet lock (twist/click lock in 3D-printing slang) with a nice click due to some springy elements,…
Update: the model had a small flaw, but that is fixed now. A Bayonet prop, that i hope you can use. Happy printing!
M9 Bayonet || Dimensions | (100% for real size) X: 98.75mm/ 3.89 inch Y: 317.5mm / 12.5 inch Z: 35mm / 1.38 inch NOTE : Dimensions are approximate and may not match the original precisely. Additional Information | NOTE: Requires…
1.1 replica of Scarborough fair from Bayonetta features of the model include an opening barrel as well as a lipstick bullet :) file contains all the parts to build each of the 4 weapons :) wanna see what is im working on next? have a look…
I designed this stand for the awesome Moon Lamp from https://www.prusaprinters.org/de/social/17340-frank-deschner , because unfortunately I have not found a holder in this style. I have made the hole for the lamp exactly 26,70mm. I…
The print consists of two parts. Print them separately and slot them together with some glue.
Scale to 300% for life size measurments except base. blade is spit in two parts for easy print just needs glued. You will need to use a raft to print the ring part.
replica model of the m9 bayonet knife from counter strike Designed so that it can be printed by smaller printers like the Prusa Mini or Bambulab A1 mini For optimal results, the printed model needs to be finished by sanding or smoothing…
People might(not) have noticed that the Intex Deluxe skimmer has bayonet connection on the inside. I made a bayonet adapter to quickly connect a 32/38mm vacuum hose to it which makes switching inlet hoses a thing of the past.
Printable CS:GO Bayonett from the Videogame Counter-Strike Global Offensive TOTAL LENGTH: 270mm Blade+Handle Simply Scale up if you want a bigger Knife. -NO Supports Needed -Material and Color doesn't matter -Recommented Layerheight:…
Thanks to Vince94520 for the bayonet fitting part of the design. His original is here https://www.thingiverse.com/thing:2897934 This locks onto my Festool Domino very well. I needed a 35mm inner diameter fitting to fit my Siemens vacuum.…
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
The old design is for looks and the new design is more load bearing and can possible by used in action.
This is a 3M filter compatible mount I made by measuring the suction side of a 3M filter. It's probably not exactly correct, but it's close enough to work for me. I used this as a component for my 3M filter to radial fan adapter:…
I was inspired by the design @InverseInduct_233286 made for the AirSense 10 to make a bayonet adapter for the AirSense 11. While still in beta I've been using/testing this and it seems to work pretty well. I'm testing ABS prints now in…
Nikon F mount bayonet. This is the camera bayonet, so you can attach lenses to it. This is not the common cap bayonet, it is oriented like the one in the camera, so you can attach lenses and adapters only in the right position. You can…
Made this Bayonet in fusion360. The Pins help with alignement if you decide to print this in two pieces and glue it together. Print settings: 0.15mm, 15% infill, support: if one piece yes if two no.
Modular Inlet/Outlet Jet Nozzle System This set includes interchangeable inlet and outlet jet nozzles designed for use in intex pools. All components feature a robust bayonet-style twist-lock flange for quick and secure installation…
This is my second CS:GO knife where I used a little bit different of a technique to form the blade part. It is a lot easier to print. You will have to glue the handle to the blade but when I did mine it seems to hold up very well. Please…
This is a project I've been working on for waay too long. "It's a fairly simple looking model, how long could it take?" Ohh how I regret my past decisions. Why did I decide to make this printable in multiple colours and in seperate parts?…
replacement Karcher bayonet adapter 1/4 Applicability: Karcher K3, K5 and similar Compatibility: aliexpress sky Category: Parts
Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…
This is a simple but clever container. The lids locks firmly in place with a Bayonet Mount. Easy to print, with no supports. Diameter: 85 mm Heigth: 70 mm If you need another height or diameter let me know!
DISCLAMER: You are solely responsible for your health and safety by choosing to use this non-approved adapter. Adapter to allow 3M bayonet filters to be used with 3M Adflo blower. Replaces the stock filter and filter cover and secures…
Here is the companion bayonet to the Lucius Pattern Lasgun No.98 Full Size Prop https://www.thingiverse.com/thing:6089764 If you downloaded the Lasgun, you do not need to download the keys. If not, I included a set in this design. All…
I added the lock piece for the bayonet, with a bushing as the nut. The holes are 0.4in screw hole to a 0.17in thru hole. It also needs a inner spring to make this system work. I added the lock piece so you can adjust to however you want…
This is a remix of Niklas macht Druck's design. Needed a base stand for the moon lamp, that allowed for E26/27 bulb and this fixture: https://www.amazon.com/gp/product/B07BQRFHNK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed in…
I picked up an AirSense 10 as a backup to my AirSense 11 and set out to remix InverseInductor's AirSense 10 adapter: https://www.printables.com/@InverseInduct_ It didn't quite work out so I started from scratch and came up with this. I…
While working on the second revision of the MRF I got frustrated enough with the “rotating lens” Mamiya Press lens mount that everyone's using bending or breaking the post on the sensor that couples to the rangefinder mechanism on the…
# AKM Bayonet Display Stand ### Description/ Instructions This display stand allows you to display your Bayonets for the AKM/AK-74 series of rifles for foto/ decoration. This stand is compatible with all 6X3,6X4 and 6X5 Bayonets and is…
Want your LEGO® Big Santa to carry some treats or small gifts for Saint Nicholas Day or for Christmas? Use this remix to store some goodies in Santa's sack. It features a bottom lid with a bayonet lock which can be opened by twisting the…
Źródło oznaczyło ten model jako treść 18+.
# AK-74 Bayonet Display Stand ### Description/ Instructions This display stand allows you to display your Bayonets for the AKM/AK-74 series of rifles for foto/ decoration. This stand is compatible with all 6X4 and 6X5 Bayonets and is…
# AK-47 Bayonet Display Stand ### Description/ Instructions This display stand allows you to display your Bayonets for the AKM/AK-74 series of rifles for foto/ decoration. This stand is compatible with all 6X2 Bayonets and is designed…
Adapter for using a SUP style pump for an inflatable wing or kite from North, Duotone etc. it will prob fit a few others also. Added smal rim on the inside to make it connect better to a North Nova wing. If you need one printed in Carbon…
Sheath done. Add/sew your own straps and you should be done. No snap buttons should be needed, just use velcro WIP for knife. Open in 3D Builder if you wanna check it out. I did this to destress myself from other work so it will take…
A replacement lens cap for any leitz R bayonet lenses. Ein Objektivdeckel für alle Leitz / LEICA Objektive mit R Bayonett.
This adapter allows you to use a Moment bayonet lens on your iPhone 15 Pro Max. It may also work for other models; I do not have any other models to test for fitment. I am including the Fusion 360 file here so you can adapt if needed. The…
Picatinny rail that fits airsoft ak made by E&L. Since my replica fits real bayonet, adapter might fit on real ak. For extra security it can be locked with M5 screw. I suggest printing prototype_6. It is less tight fit that prototype_5…
The Loctite branded nozzles for their dispensing guns are too large and wasteful if you only need a small amount of epoxy. I was wasting over 10x the amount I needed to dispense since the nozzles are one time use. This nozzle has a finer…
Hardware free soft knife for meelee tags in nerf or other sports. Files are preoriented. Changelog: UPADTE: 19.03.26: added a midlock 2 compatible sheath
With this project I recycled early prototypes of my bayonet blade from the HEMA musket project. It is modeled after original 1800s british musket bayonets with an enlonguedback portion to reach a Length of 60cm. Print the blade from TPU…
Thanks to the original Author, I was able to modify the P1 mount that secures the V3 bayonet to the rod. This mod uses the rest of the printable and non-printable parts from the original @KPTexan_38915 post. You will need M4 or M5 bolt…
low height Canon FD bayonet lockring to have aperture control without a camerabody or bulky adapter. Not intended for adaptation to a diffferent mount just for iris control. Made this originally to get aperture control for a MTF analysis…
I was too lazy to buy one, so I drew and printed it myself. I printed it out and verified it on my camera. But everyone's luck is different. Use at your own risk.
Introducing the 3M Bayonet Filter Adapter for 3D Printers ! Transform your printing experience with this adapter designed to seamlessly connect your 3M bayonet filter to your printer. Say goodbye to airborne particles and hello to…
(Update 2: the .f3d file is available to remix into your own design.) (Update: the v2 version now fits (quite snugly) into the Apple Leather case.) Since Moment doesn't have a lens mount yet for the iPhone 13 Pro, I decided to make my…
Update 22.10.2023: V2 is here. V2 is an updated version with a little more diameter on all parts. This gives the screws a little more walls which, in the end, looks nicer and prints better. The screw type is still M3, the o-ring…
This adapter is for an MSA Advantage 200 Respirator (#00817663, circa 2004 according to copyright on the unit) to accept 3M 6200 cartridge filters. Made another adapter by Revenantautumn for a friend that didn't quite fit right. So, back…
# SVD Bayonet Display Stand ### Description/ Instructions This display stand allows you to display your Bayonets for the AKM/AK-74 series of rifles for foto/ decoration. This stand is compatible with all 6X3,6X4 and 6X5 Bayonets and is…
Import and incorporate these 2 connector pieces in your designs where you need a removable component. Once printed, insert and twist to lock into place. For it to work, you need to cut a ring of material like thin foam as a compressible…
I designed this to be able to print strong boxes with a lid to keep small items safe in my daily carry bag. I've included a printable file for a 30 mm diameter and 30 mm high box with a wall thickness of 3 mm. I've also included the…
This adapter can be used to connect a 3M filter to Decathlon Subea Easybreath snorkelling mask. Print instructions The print can be coated with XTC-3D which will make it 12-times more pressure tight. You will have to buy the 3M 6895…
Print without support. 0.30 mm draft. Optional: Brush surface with fine sandpaper and steel brush. Do you like it? Please consider to buy me a cup cup of coffee .
# VZ-58 Bayonet Display Stand ### Description/ Instructions This display stand allows you to display your Bayonets for the VZ-58 series of rifles for foto/ decoration. This stand is compatible with all VZ-58 Bayonets and is designed after…
Simple stand I designed for the M5A1 bayonet.
Car tissue holder that fits into a car cup holder. Uses tissue from a standard box. 82mm outside diameter, 200mm tall. Has a solid lid option if you want to use it for something other than a tissue container. This fits in our Honda Accord…
an amiibo for smash, an umbran wich who has lost his memories can now be on your shelf ( the original model is in this page https://www.models-resource.com/3ds/supersmashbrosfornintendo3ds/model/64732/)
I had a long-running debt for the community: I made a halotherapy mask 2 years ago and I used a 3M mask as a base and had to buy original filter cartridges. Howto is here: https://www.instructables.com/id/Halotherapy-Mask/ But sacrificing…
I got tired of threaded lids. This container closes with about a quarter rotation an safely locks in place. Outer Dimensions are about 75x75mm. Tested on .6mm nozzle with .4mm layer size for fast printing. Images were printed on this…
a model i made to place an amiibo token underneath the figure, if someone could add the charms(because if i fix it to be printable the charms disappear), i would be really grateful because I'm not a profesional 3D modeler
This design is a simple kitchen roll holder. there are many around but I could not find one that fit my needs. In particular I wanted one that was fairly easy to print not too many parts easy to fit together and operate that would…
Dust Cap Fuel Cover Lid for autogas - GPL - LPG Filling Point. Use the spring from old cover and place that in this one after print! I made this one because the standard one fitting is sometimes too tight. print without support.
I was asked to create a bayonet with lockring similar to my Mamiya Press version for Pentacon 6 lenses. So here it is! I've provided STEP file for use in your own projects. See the main image for assembly order. The center ring screws…
Camera body cap for use with a camera using an Exakta-Bayonet style lens mount, such as the Topcon RE Super (and other Topcon Cameras). For example, works with this camera: https://lens-db.com/camera/topcon-re-super-1963/ STL and STEP…
Replica of a bayonet for the CETME C spanish assault rifle. Need a spring for the retention mechanism. Category: Props
To be inserted into the center hole of a filament spool. Model relies on the slicer to create breathable walls. Just set numbers of top and bottom shell layers to zero, outer wall loops to 8 or so and choose an infill pattern and density…
Low profile MSA bayonet to Nato 40mm adapter, Designed and tested on an Advantage 1000. Designed to work Jan_Asleep's inlet covers. https://www.printables.com/model/1043066-40mm-gas-mask-inlet-covers
@MVasilakis_835 's original design I remixed is very well done , I've used it for over a year now. Go check his out first, it might be exactly what you need. The style of 3M respirator filter I use is round and it hits the top of my…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
i edited it into 3 parts so you can print the middle out of metal if you want, and the left and right halves of the handle out of something else like plastic if you want. also, heres a link to the original one i made and put on grabcad:…
This is an adaptor to allow attachment of a standard 43mm male threaded part to the Laowa 25mm 2.5-5x macro lens bayonet mount. It has been tested with the Raynox DCR-250 super macro conversion lens and seems to work well. Printed at…
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. The product is designed not only for the Korsar pistol, but also for any pistol, the silencer of which is mounted on the m12x1 thread.…
Last autumn, I designed the smooth spooler - a felt clutch dampened roller arm. At the time, I adapted a two part low profile spool holder arm that prints a left part and a right part. So here it is February and I didn't like the way the…
A lens hood for Retina Ib, IIc, IIIc, IB, IIC, IIIC & the original Retina Reflex. It mount via the bayonet, it holds firmly and is easy to mount and dismount. It is modeled after the original accessory bayonet mount hood, (push-on hoods…
Background The Module Section System (MSS) is the second generation, now fully 3d printable module sections that fit the Blue Robotics 4'' enclosure tubes. The first generation was created for the AUV “Ålen” (The Eel). Me and two friends…
Remix of NZ Bayonet Adaptor for Moon Lamp with M40 by 2.5 pitch threads to accept an Asian sourced hanging twisted rope type of lamp socket that I found on Amazon.
This is a lens hood for the olympus (m.zuiko) 45mm f1.8, using the bayonet mount. Feel free to make remixes that are perhaps longer or shorter, but this is my preferred size because it is easy to store and still gives good performance.
Simple stand for military collectors to present Mosin - Nagant bayonet Available in two versions - simple and reinforced
A simple little plug to seal up a 3M mask port using the bayonet connector. Made this because I only have one filter for my mask and without something to close up the second hole, it wouldn't be effective. This is best printed with…
An adapter from "Metabo Quick Ø32 mm" (used, for example, in the Metabo ASA vacuum) to "Bosch Professional bayonet mount Ø35 mm". The model consists of 3 parts. The clamping ring and the adapter can be printed in PLA or PETG. And a seal…
With the release of Silver Bayonet, I needed some cool clue markers. The game has a varying number of clue tokens needed for each game, and you refer to a chart in the book to see what was revealed. I decided to come up with a set that…
I took inspiration on Orangespy's mount for a PNV-10T to a western Style bayonet mount. I remade the design to fit in the rail of my 2020 produced PNV-10T and to connect to my Rhino 2 via the 4 screws that come with its bayonet adapter.…
Print with the support pause technique shown in this JanTec video . Print at 0.1 mm layer height with the ½ inch bayonet down. Add supports and pauses at the bayonet and the overhang for the E mount, and just supports for the small…
A quick and easy to make project. Father Andersons bayonet from the anime series Hellsing. can Print Blade file 02 as many times needed to make desired length. Would suggest scaling up if you wish to make the blade longer than 50cm as it…
The bayonet adaptor on my inflator broke so the bayonet would no longer attach. So I designed this replacement. It also fits into the deflation port. I have the CIT1800G inflator and it fits perfectly, but it looks like the P747 has a…
This is a Lego bayonet add-on for anyone who wants to upgrade their Lego battle scenes with ease. All you have to do is slide the piece down the barrel of almost any Lego blaster and boom! And it fits almost every Lego gun. Print…
A better, more rugged version of the good old poop bag container.
![[WIP] MLOK K98 Bayonet Lug](https://media.printables.com/media/prints/478982/images/3925436_40cfe385-c51a-4403-9eb3-c8d7126cbb4e/bayonet-lug-watermark.jpeg)
