15 092 modeli
The angled mount hole centres suit a Ring doorbell generation 2 model with holes centres of 44mm (width) by 87mm (length). 2.0mm mounting hole may need opening up to suit non-OE screws Recommended lay height of 0.2mm (Speed) and 100%…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…
Wydruk około 18,08 €–22,10 € nettoWstępna wycena jednego wariantu
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts. (Although these are designed for the KP3S, they could be used for other applications as well.) Updated [ September 1, 2022 ] ────────── A shorter clip has been added.…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Update: January 22, 2023 Inspired by @Wolfaert's remix, I decided to make a no-support version of the obelisk top. Print egyptian-obelisk-puzzle-top-no-support.stl as-is, no supports required. ----------------------- My 5th grader is…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Wydruk około 3,42 €–4,19 € nettoWstępna wycena jednego wariantu
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
Wydruk około 5,37 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a very simple 2GT belt clip and couldn't find anything that didn't require additional hardware for an open belt so I came up with this simple design. It features two individual parts that join together to lock the end of…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Loosely inspired by Adam Savages Youtube video about making a belt holster from aluminium, I created this holster for my Leatherman Charge TTi. Belt size: up to 40mm wide and 3mm thick, but feel free to contact me if you would like a…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
This is a flashlight holder to go onto most normal belts. it is designed to accommodate OLIGHT Warrior 3S type flashlights with metal clips attached.* There is a feature that works with this type of flashlight - put the light into the…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple joiner that allows you to connect two ends of a length of 6mm wide GT2 timing belt. The joiner is shaped so it does not interfere with the teeth of the belt. Print with largest surface down. Slip the ends of the timing belt into…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement wall mount for the wyze doorbell.
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
OUTDATED : see https://www.printables.com/model/1038392-weihnachtsschmuck-glocke-2024-viele-sprachen-chris Not much to tell - it's selfdeclaring. I printed with a 0.4 mm nozzle and 0.15 mm height. No supports needed Created with OnShape →…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
To the bar need support, print in place. Spinlock collar a bit tight, must be modified the Y and X axis, for my mk4 need 100,5%!!! Scaled in gcode. Dimension: Bar: length 18cm, diameter 2,5cm Weight plate: diameter 6, 8, 10cm, hole 2,6cm,…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Recently I've designed bellows for macro photography using 3d printed parts, 200 mm of 2020 v-slot profile, some hardware and a EF mount scavenged from a broken lens. This design is basically a copy of the original brass mount with a…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of my Kettlebell keychain model, now with separate bodies to allow for easier MMU painting. Printing Tips I tried a few different combinations and my favorite was a light color for the body (mate green) and black for the…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
Kantenhobel : ist ein 3 teiliges Modell, alles auf einmal druckbar! Handlich klein 40 x14 x 27-30mm je nach Fasenbreite. Druck: PLA Prusa , 0.2mm Quality Montage: erst die M3 Muttern einpressen, Klinge in Halter (grün) einlegen, die…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
[EN] The holder allows you to label Yours water/heating pipes using a standard Dymo labeler. There are 2 versions of the holder for 12 x 50mm labels (total holder size 17 x 67mm) for 9 x 50mm labels (total holder size 14 x 67mm) The…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
She's not as courageous. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
I've Hacked and slashed the bellows frames for quick printing to test bellow fit for My Custom Bellows Upload, which is printed in TPU and in Vase Mode. This would help when printing in a different nozzle diameter or extrusion width. Cut…
Wydruk około 2,82 €–3,44 € nettoWstępna wycena jednego wariantu
Um die LED-Streifen zu befestigen, habe ich einen Clip entworfen.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Příchytka k uchycení kabelu na zeď.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Empty plant labels to be used with a permanent marker. Print in a bright color, with PETG
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I put an “ironing” in the G-code to smoothe the top layers, and a change of spool just before the end, to make the emblems appear more clearly. Hope you'll enjoy my models. The choice is yours…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
I provided a MK3s gcode file for PETG. I made these to be used outside, so i used PETG, not PLA> inside PLA would probably be fine. Happy printing!
Wydruk około 7,82 €–9,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Soporte de dos niveles de diferentes alturas para colocar bandas de cabello. NO requiere soportes. Una vez impreso se debe ensamblar utilizando pegamento para el soporte inferior y un tornillo para el superior. Incluí un archivo para…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
This is a simple Labello style container box, it was made for bachelorette party for joke. Support free I printed the stl with 300% scale (to have enoght space inside) , if you print with 100% scale, it will be similar, like an original…
Wydruk około 9,98 €–12,20 € nettoWstępna wycena jednego wariantu
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for (1-3)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Belt sanders produce a lot of sawdust. To keep my shop sawdust under control (more or less), I connect all power tools to a shop vacuum equipped with a HEPA filter when I use them. This adapter allows me to connect my Ridgid R2740 belt…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Exact same version of the Remixed source, but in 3mf file format. Parts are Pre Broken down.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
It looks amazing printed in a silk material!
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
Stackable Insertbox 2x3 units in footprint, 1/2 height, 2x4 grid with label holder in each partition two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shifter lever Buttonbox with M3 / Schalthebel mit M3 stick some double-sided tape between the joystick rod and the shift knob to prevent it from rotating. https://www.printables.com/de/model/530160-button-box-for-simulater-ets2-pc I would…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.
Wydruk około 1,13 €–1,39 € nettoWstępna wycena jednego wariantu
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Ich beschreibe hier eine parametrisch anpassbare Hohlraum Kabeldurchführung am Beispiel eines Homematic Leistungssensors Der Leistungssensor von Homematic IP wird an eine Moderne Messeinrichtung IMEI angeclippt. Wenn diese jedoch in einem…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Wydruk około 1,67 €–2,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to make a single dose funnel which is compatible with the DF64 bellows as I already have a DF64 next to the Eureka Mignon. I like printing in vase mode as it is fast and beautiful (no seems). The dimensions are chosen such that…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine Abdeckung für einen 22x10 Kabelkanal
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Dies ist eine einfache Stativbein-Halterung für einen Rollei-Kabelauslöser. Die Halterung wird einfach auf das Stativbein geklickt. Die Halterung wurde für einen Stativbeindurchmesser von 32mm entworfen.
Wydruk około 3,99 €–4,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydrukowałem pionowo z podporami
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
I had the bearings fail in the original tensioner for one of my printers. I realized they were only using a single bearing instead of a double and found that there were toothed options which made sense to me. You want the 20T equivalent…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nagelschelle, um bis zu 3 parallel verlaufende Kabel anzubringen.
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
I wanted to do a dog tag to match my dog's collar. We are Star Wars fans, and she's definitely a Rebel, so she gets a Rebel Alliance tag. I also wanted the back side to have her “Home Again” chip info in case she gets lost. Printed on…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Tutaj znajdziesz 3 proste elementy, które prawidłowo złożone utworzą piramidę taką sama jak w serialu Diabelski plan. Here you will find 3 simple elements, which, when correctly assembled, will form a pyramid just like in the series…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I have done it in PLA.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I fixed the part with small wood screws.
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A super simple print for putting a tiny wall around the Z belt openings on a Voron 2.4 or Troodon 2 Pro style printer. Print 4 of them. They block bits and bobs from falling into the pulley hole. You can glue them, or you can leave them…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
This lets me connect my Fein Turbo shop vacuum to a small Rikon belt/drum sander. I included the OpenSCAD file for use in other designs. Printed in green PLA with 0.2mm layers.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
einfache scheiben mit denen sie z.b. einen verzogenen Tisch wieder Wackelfrei machen.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We needed a button for our drink-randomizer game built using my LED-Drink-Coaster-Puzzle . I had this button, so I designed this box. Here you go :-) Printing any nice material, e.g. Prusament Galaxy PLA support: yes but with bigger…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
Ich musste durch meinen Kaltkeller ein Kabellehrrohr entlang der Decke legen. Diese ist allerdings mit mehreren Zentimetern Styropor gedämmt. Dies ist eine einfache Platte, um den Druck der Klemme besser auf das umgebende Styropor zu…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Distance between the bolts - 20cm. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4 hours. Slicer settings: 0.25 mm layer height, 4 perimeters, 30-40% infill, no supports Post processing…
Wydruk około 7,24 €–8,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 20261008- Added two new Cover Cap variants Six caps and covers for your BabyBeltPro LDO Toolboard, in flat and angled versions. Flat Cap (easiest to print and install) Flat Cover Flat Cover Cap Angled Cap Angled Cover Angled Cover…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Description Creality K1 and other printers. Belt tension meter to adjust belts at same and correct tension. If you print it right, when the needle is in the middle, the belts tension should be at 110hz. Settings: Nozzle: 0.4 Line height:…
Changelog 2023-09-25 - Label samples Bunch of 1 unit wide labels (M2, M2.5, M3, M4 Hex/Nylock/Square nut, socket head bolts) 2023-09-29 - Stacking lip and label shelf fix New F3D file (v1.2) uploaded - The label shelf is moved 0.6mm lower…
Dimensions (LxWxH) 170 x 64 x 36 mm (100% scale) Basic information A long awaited, fifth addition to the Articulated Sea Life collection, the Beluga whale is here! It was designed to print as easily, and as reliably, as possible. No post…
A cable strap to keep all sorts of cables from turning into a big knot. My goal was to find a solution that could handle all sizes of cables. For small charging cables there are already many models, but large cables also knot quickly. But…
We were doing virtual training on our Hexagon Absolute 83 Scan Arm and AS1 Scanner in the lab and when we finished I wanted to scan something more organic. We just happened to have a crumpled Taco Bell bag so we put it up on the table and…
Update May 2025: Fixed a bug in the parametric fusion 360 file. It seems that with a Fusion360 update a bug was introduced in the application, that lead to the boxes being broken when the height was changed. I repaired a few steps in the…
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
Introduction Wasn't happy with the selection of water spikes out there so decided to create my own to fit whatever needs you may have! And while you're at it why not have it double as a plant label! This spike can be printed in as little…
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…
This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…
I wanted a bin where the label was easy to read even from the front. So I made these. Apart from the fact that the design of the label lip prevents other units from being stacked on top of the bins, the dimensions of the bins are in…
Description: The method of measurement with my tester is similar - it also compares the tension of the belt Gates 2MGT-6 (used in 3D printers such as Prusa MK3 and Prusa MINI or similar) with the tension values recommended by the belt…
Celebrate the season with these intricately designed bell-shaped ornaments, featuring five variants of open geometric patterns in spiral, lattice, and linear styles. Each bell is optimized for 3D printing and maximum visual impact.…
Hi there! Welcome to my most complex model so far! Do you hate models that are a nightmare to print? Because I do! Easily printable models is an attribute that I want my name to stand for! I designed this engine model from scratch and…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
I made some changes to the original Design: Added Ender 3 version of Y-Axis tensioner Uses M4 screws and insert instead of M5 Made the bearing holders slide into their housings easier Extended the length of the bearing holders so the…
Filament type and print density will create variations to this tension gauge. PETG is recommended. It is only a indicator of relative tension. The Fusion 360 files will give you the ability to adjust for belt widths or other belt lengths…
The containers are designed to be used independently or with Gridfinity baseplates . The bottom has magnet holes for magnetized Gridfinity baseplates. The containers when fully loaded are stackable. The battery model number is printed on…
Egg holder-egg box-egg stand with changeable sign for MHD/BBD m With changeable compartment to insert small pieces of paper to write down the expiration date. Always fresh eggs, thanks to this dispenser, fill the dispenser with up to 10…
This is a wearable, articulated, print in place, super fashionable 3d printed belt. Enjoy! Print instructions Blank buckle If you want to support me get the belt without a logo here: https://www.printschnitzel.at/belt You can always…
A kettlebell inspired keychain. Prints pretty good without supports. Hot tip: Pause the print while the handle is printing and put the keyring in place. Originally published in 2019: https://www.thingiverse.com/thing:3989772 Category:…
A cute dumbbell that can be used as a keychain or necklace. A version without a key ring is also included. Printed with PLA at 60% infill (I wanted it thiiick), without supports. Check also my Kettlebell model ;) they go well together!
It's a box for your 3D printer nozzles. Specifically, it's made for E3D v6 compatible nozzles, like those used in the Prusa printers. It fits 14 nozzles, 2 each of: 0.25, 0.3, 0.35. 0.4, 0.5, 0.6, and 0.8 mm. (These are the sizes that…
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
So I needed plant labels, and recently got into playing around with OpenSCAD. So this is my attempt to port the awesome design by @fortinmike to OpenSCAD. Whilst not exactly the same, it tries to provide a very similar look. You can see…
Modular Honeycomb Storage Container with space for label This Container is a customizable storage solution designed for makers, hobbyists, and organizers. The modular container features: Screw-On Lid : Secure threaded lid for easy access…
