Liczymy pasujące modele…
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
MRC24 is a m icro RC R ock C rawler in approx. 1/ 24 scale using small hub motors to directly drive all wheels. It's a fun toy to climb slowly rocks and terrain. All main parts are 3d printed: chassis, front and rear axle. However, you…
Rear bumper with new holder for RC car model WPL C24 Toyota Hilux. Bumper is from the source: https://www.thingiverse.com/thing:2970496 The bumper bracket is completely new.
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Vesa Adapter for the Samsung C24FG70 I used the m4 screws from the stand to mount the plate on. I used M4 10mm screws, but had a hard time catching the nut for the bottom so I used 25mm with a spacer for the bottom part. I included the…
This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…
WPL C24 Bed Rack (Reinforced) *This model is an edited version of someone else's design*
3D Printable case for the CNC Kitchen C245 Heat Set Insert Soldering Iron Tips compatible with, for example, JBC Tools stands (ADS, CTS) and soldering stations such as the YIHUA 982, Quicko T245, KSGER T245 or Sequre T245. Fits the Insert…
Just added some more geometry to just make the bumper a bit stronger. Print Settings Supports: Yes Category: Toys & Games
I was dissatisfied with the commercially available choices, and the 3D-printed solutions I came across online were unreliable. As a result, I took it upon myself to create this unique design! The purpose of this model is to be firmly held…
WPL tubular lower link c24 c14
The original version is far superior to the stock steering arm. I modified it so the slotted piece of the arm that attaches to the servo was longer. The original model would make the front end dip down when steering extreme left or right.…
Recommended settings: Material: ASA Layer height: 0,2mm Perimeters: 5 Infill: 15% Supports: NO Let me know how your print fits. :)
Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…
WPL C-24 steering system C24 Hilux C-14
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports. Holds 10 C245 style tips. In my design I wanted to add some weight near the base to make the holder more stable so using CURA's 'Pause at Height'…
Store up to six (cold) JBC C245 soldering tips, attached to the left to your soldering station. Specifically fits the profile of the C245 tips. This holder attaches to the soldering station just fine with a single M4 flathead bolt, length…
Based on the one created by Venom I have made this modification for more tips and modified the station attachment point
Replacement parts for the Bafang DP C240 CAN LCD and Button Mount. The tolerances are relatively tight so there might have to be some sanding/filing/post-processing. LCD Mount Requires original hardware 3x M2 screws 1x M3 screw and…
Some variant parts for Unboxingexperience7's MRC24 model.
This is a cover for the GUITION JC2432W328C development board. It is a cheap development board that can be programmed with MicroPython, Arduino IDE and ESP-IDF. 3mm screws are required for assembly.
3D Part which allows us to place a Macro Lense into a Vevor SC240M Thermal camera. Should work with Infiray C200 and other cameras with same housing. This holder works with 20mm Lens, the only thing is needed is the lens, and two small…
Printed with ABS. 4pcs M2x3 wafer head Screw 4pcs M2 Nut some 7x0.2mm Nickel Plated Steel Strip 2pcs M3x20 screws 2pcs M3 brass inserts (or print "18650x2_v4_case_plastic_taping.stl" and tap thread in plastic) Covers just glue after…
My original mounting bracket broke when torqueing the mounting screws the first time. This model is a replacement that held together when torqued. Print four of the mounting clips as you need one for each screw. I recommend printing with…
This is a replacement for the catch that secures the hand-held tube to the flexible hose Category: Replacement Parts
It's a replacement cap for DC24 wand upper handle. Print it out with the flat part (top) against the plate, and pop it on.
I use these buck converters to power lights from self-made powerbanks with XT30 output. So I needed a housing to deploy them. This is a tight fit with minimal footprint. Print in PETG to accommodate for heat produced by converter.
I needed a low profile mount to stick to my wall as a baby monitor. I used two XL 3M command strips (removable velcro tape) to adhere to the wall. I printed the mount out of some PLA+ at 5% infill and 80% infill around the little arm…
The brush of the Dyson DC24 was broken because of the end ca. I remodelled it and also added a handle for easier removal
A 1×3 Gridfinity bin (6u tall) designed to hold the CNCKitchen Heat-Set Insert Kit (C245 standard) . Includes dedicated slots for the full kit plus the 3/8″ tip . I realised after printing that it doesn't make sense to include the thread…
Just a simple rock slider for WPL C24. I'm not sure if it will fit other models.
Inspired by the one created by Venom, redesigned for 10 tips, also locking grooves on the station attachment piece.
new front axle with 20° caster to improve steering for my 3d printed 1/24 Rc crawler #MRC24
Just a simple clip-on stand for the Trust Trino webcam. One of the file is just the clip, if someone wants to customize it. Print this object on the side with support everywere with top/bottom clerance of 0.05mm, 3 perimeters walls and…
I was trying to install the 370 motor with low gearing to my C24. It turned out the upper part of the motor is colliding with the standard position of the truck bed. This model is my attempt to move the motor down. Additionally it…
WPL C24 lowered bumper mounts, use a B-Series Bumper or something custom, mounts using stock crossmember screws.
I've had my JBC iron for about 4 years now, and it lacks the fancy built-in storage for C245 cartridges like the new models do. This is my V2 of the 3D print I have been using to store extra cartridges for about 2 years now. This version…
This fixes a common fault on Dysons DC24 where the ball becoming loose and clunky and gets significant play up and down on the left side of the ball if you look at it from the front. This play can cause the ball to catch on the HEPA…
Rc karoserie Gaz 69 pro podvozky WPL
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
A simple JBC C245 tipholder for Ikea Skadis, to hold 10 soldertips. Printable without supports, I'm using 20% infill. Print three Ultimount Connector/Hooks from https://www.printables.com/model/376207-skadis-ultimount-connectorhook
Rc karoserie na podvozky Wpl, k stavbě není plánek ale lze to s trochou představivosti zkompletovat.
This is a replacement part for the Tefal GC241D Grill. The Clips of the original colored parts broke of after a couple of years. I used a translucent grey PLA Filament as the lamps were already colored underneath but this results in a…
Please like this model, it helps me dedicate time to making custom models! If you do remix this please link to this, it took over two dozen attempts to have this fit correctly. This is a snap in clip for the WPL-C24 Toyota Hilux looking…
This is to stop the 8mm bolt head spinning in the T slot of the work surface if you bought a version with the clamps. 7.4mm hole and 14mm across flats (nut_holder.stl) Makes it a lot easier to use the wing nuts. Added a 6mm version upon…
Sander hopper for the wpl series pick up trucks Note… this is a vibration hopper you have to get a couple rumble packs out of a old controller and wire them up as a servo and it'll provide enough vibration that sand will actually come out…
Mount a Eufy Solo IndoorCam C24 to a West Elm Mid-Century Crib for baby monitor.
Gridfinity is a modular, open-source grid storage system for your workshop that lets you display your tools and parts for quick access and retrieval. It consists of a gridded baseplate that can hold bins of different sizes and shapes. The…
Eclosure for DC2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. For XT60H.
I got this Tefal grill for my birthday a year ago. One of the handle attachments on the front broke quickly. I made a replacement. I made it sturdy and also saved material by adding openings where possible. This is version 3 because the…
Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici réalisable avec notre imprimante 3D La retenue et…
This is a cover case to protect Eufy camera from the rain only for this specific angle (camera looking direct to the ground) simple, fast and cheap(20.64g) to print. PLA 0.20 - Height No support
Print in PETG / 0,2mm Layer Height / 40% Infill
Gridfinity is a modular, open-source grid storage system for your workshop that lets you display your tools and parts for quick access and retrieval. It consists of a gridded baseplate that can hold bins of different sizes and shapes. The…
I have modify my eletronic to brushless, so i designed a open trunk lid for a better colling and a mounting point for the on/off switch.
I designed this bracket to slide into the Prokord LC24P mounting head for my G9 monitor not to tilt as much (flex the mount). The "Prokord Gas Spring Monitor Arm LC24p” is capable of a screen upp to 15kg, and the G9 is around 10kg without…
This is an adapter to put a 60mm Pocketbike Airfilter onto an Honda Rebel 125 carburetor. Category: Automotive
USV- Battery Tray for all APC SU[...]RMI2U or SUA[...]RMI2U USVs. Tray was testet with SU1000RMI2U and SUA1500RMI2U Tray is a bit floppy with the batterys in it so handle with care. But installind and removing the Batterys is super simple…
This model is a sturdy version of the handle-connector pieces used in the Tefal Inicio Grill / Toaster GC241D. Both original pieces broke simultaneously on my toaster grill, prompting me to remodel the part with some extra material in an…
Quick made case for JUNLIWEI XPG (XPGT12.TAOBAO.COM) controller with front panel (90x40mm)
The letters should snap fit to the base, no glue needed. ⚠ The STL files are scalled up 400% in the preview pictures. The 3MF file already includes the upscaled version.
About the design This battery cover replaces the original plastic cover. The built-in clip on these covers is prone to breaking, and that is what happened. I designed this cover in Alibre Design Cad software. Printing Instructions Print…
This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts. Internal diameter is 11mm, when printed in PLA I had a perfect fit right away, however PLA will conform to the…
A 2x3 Gridfinity Holder for the Bosch Self Centering Bit Set No. 6, No. 8 and No. 10. The Box is 3 High.
Usage: This part serves as a replacement filter for the compressor. Before use, you need to install a piece of cloth or sponge inside.
JBC c245 and c210 tip holder
I designed this holder so that you could keep your C245 and C210 tips (for my Yihua 982D SE but any soldering iron that uses those containers/tips will be fine) in the containers which will help them last. I decided to do 2 rows of 6…
Used for mounting a 2-port buck converter (MH-KC24) to DIN rail. Just glue or screw a printable mounting system to the backside. It's a tight fit for all components so technically not additional components are needed. Only the din rail…
A simple, Small stand/holder for 4x C245 soldering tips and a roll of solder. Can be printed with 10% infill 0.2mm layer or coarser if you wish PLA/PLA+ or PETG
A simple JBC C245 tipholder for IKEA SKÅDIS, remixed into 3-tip and 5-tip versions. Since now there is only one hook the model is not that stable compared to the original model. I only printed the 3 tips version yet since I do not have…
I made this to organise my soldering tips and stop them falling out of the case. It holds 3x C245 tips and 2x C210 tips, and fits the HGRLC RC1 C210 soldering iron case with enough room to spare for a vial, in which the C210 tips are…
It holds ~14 C245 tips. It could theoretically hold more if the angle became steeper moving backwards, which would avoid hitting the back wall and let the rows "overlap" a little bit internally. But I don't have enough tips to justify…
This is an adapter to put a 60mm Pocketbike Airfilter onto an Honda Rebel 125 carburetor. Category: Automotive
About the design This battery cover replaces the original plastic cover. The built-in clip on these covers is prone to breaking, and that is what happened. I designed this cover in Alibre Design Cad software. Printing Instructions Print…
I got this Tefal grill for my birthday a year ago. One of the handle attachments on the front broke quickly. I made a replacement. I made it sturdy and also saved material by adding openings where possible. This is version 3 because the…
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the…
Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…
Printed with ABS. 4pcs M2x3 wafer head Screw 4pcs M2 Nut some 7x0.2mm Nickel Plated Steel Strip 2pcs M3x20 screws 2pcs M3 brass inserts (or print "18650x2_v4_case_plastic_taping.stl" and tap thread in plastic) Covers just glue after…
This holder accommodates 11 additional C245 soldering iron tips and fits into the Aixun T3A ( https://s.click.aliexpress.com/e/_c3dRBPjH or https://amzn.to/3QZmkgo ) soldering station stand. Do not change the orientation, or the slot will…
It's 7 holes punched into a gridfinity bin with some labels. This specific set was for C245 tips, but I suspect that any set that "looks like" this on aliexpress is the same, since the iron tip just needs to match the threading.
It holds ~14 C245 tips. It could theoretically hold more if the angle became steeper moving backwards, which would avoid hitting the back wall and let the rows "overlap" a little bit internally. But I don't have enough tips to justify…
A simple, Small stand/holder for 4x C245 soldering tips and a roll of solder. Can be printed with 10% infill 0.2mm layer or coarser if you wish PLA/PLA+ or PETG
an axle mount for the steering servo that also adds a 10 mm lift wpl c24 or c14
Actually not a remix but a remodel based on this because the original file was a bit sketchy. Heavily reinforced and added longer posts to fit both the 24" and 27" (and similar) models. Print Settings Supports: Yes Infill: 50%
Custom Crawler course track where you can set for easy or hard crawling. All parts are Left hand and Right hand orientation, excluding stairs Easy assemble and disassemble for storage or moving around. No tools required. Pined track for…
I found out that after installing some 3rd party metal suspension for my C24 the default servo horn was too short to maintain a useful angle of the steering linkage. This one has some extra lenght - I ended up using 3rd hole from the…
Original replacement shelves are very expensive and/or not available. So i designed this one myself.. Print Settings Printer Brand: eMotion Tech Printer: MicroDelta Rework Rafts: Doesn't Matter Supports: Yes Resolution: 0.3mm Infill: 10%…
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the…
I couldn't find tip holders that actually gripped the tips themselves; the ones I found were either too loose or not what I wanted, so I made my own. I printed it in HS-PETG from Sunlu, but it should work fine in PLA and other materials.…
This Gridfinity-compatible organizer is designed to neatly store heat thread inserts and soldering accessories in one compact module. It fits heat thread inserts in the following sizes: M2, M2.5, M3, M4, M5, M6, and M8 , each with its own…
This holder accommodates 11 additional C245 soldering iron tips and fits into the Aixun T3A ( https://s.click.aliexpress.com/e/_c3dRBPjH or https://amzn.to/3QZmkgo ) soldering station stand. Do not change the orientation, or the slot will…
This is a compact holder for C245 soldering iron tips which protects the soldering tip and its electrical connections from damage. Ideal for portable use in a small tool bag where there is not a lot of space (The 3 tip variant fits nicely…
It's 7 holes punched into a gridfinity bin with some labels. This specific set was for C245 tips, but I suspect that any set that "looks like" this on aliexpress is the same, since the iron tip just needs to match the threading.
Quick and dirty model, I printed it standing up, the way it'll be mounted. It will need supports that way, but the holes for the solder tips will be dimensionally accurate. It's not a 100% perfect fit, since there is hardly a straight…
THIS IS A REMIX OF : https://www.thingiverse.com/thing:4876463 | Author : greenslade I had issues with my mh-kc24 board fitting any thingyverse case.. this is a remix of the best I found. I increased the space the board can fit width…
Print on the baseplate and fit screws through the holes to make the part more rigid.
G'Day! Here's a cool accessory to have on your rig! Jerry Cans are included below.
