Liczymy pasujące modele…
3 part print that holds an AirTag on your dog's collar or any strap up to about 30mm wide and 3mm thick. Fusion360 file included so you can easily make it fit your collar/strap. Printed at .2mm layers, 3 perimeters in Prusament Azure Blue…
Introduction Pretty self explanatory, put your stuff in here! The collar can be positioned at different heights relative to the cup to accommodate different item sizes. The size refers to the internal diameter. Designed to fit onto HSW…
These are drill collars (aka stops, bushings) to set up for specific repeatable hole depths. Includes all 1/64 increment sizes between 3/32 and ½. I used 4 different general sizes and made all the intermediate sizes with a python…
These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…
Note: this is an accessory for the Dummy 13 figure created by soozafone, which you can get here: https://www.printables.com/model/981111-dummy-13-version-10 I designed an Olympic barbell for Dummy 13 figures, complete with functioning…
Label Collars for the Bosch/Sortimo 1x1 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
These are .step files for various bit collars for the Carvera Air (and original Carvera) CNC machine. Included files: 3.175mm (1/8") 4mm 6mm 6.35mm (¼") You may have to adjust for hole compensation on your own printer to make sure it fits…
Some simple collars for specialty barbells that are smaller than a regular bar ( axle bar, farmers carries, safety squat bars , log ) or anything else made with sch pipe (1.900" diameter). Not the worlds strongest collars, but more than…
Label Collars for the Bosch/Sortimo 1x2 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
just some flanged washers for some body work panels Category: Automotive
This is a low profile clamp wrench for Rugged Suppressors center fire rifle locking collars. This will work with Surge, Razor 556 and 762, Micro, and Radiant models and their new RUM HUB adapter. This is a remix starting with a trace of…
I didn't like the dangling style of adapters or the slip-on style (my dogs are way too active to trust they'd stay on), and I didn't want to have visible screws. So I came up with this design. The screws go in from the backside and are…
These are replacement clips for the collars you put on pets to stop them biting/scratching/licking - known variously as "Elizabethan" anti scratch, buster, cone collars My dog is always bashing his cone on things and the clips fall off…
These are drill collars (aka stops, bushings) to set up for specific repeatable hole depths. Includes all 1/64 increment sizes between 3/32 and 1⁄2. These are embossed with sizes. These are setup for a single pan head type sheet metal…
Two different versions uploaded depending on your grip strength. The short handle can hold several hundred pounds per clip, but can be difficult to load on the bar. Both work great for bench, deadlift, and squats on a 2" standard bar.…
This is my attempt at replicating a 1/5 scale model of a Titex Calibrated Weight Plate set. Everything can be printed, however I found that the plates were too heavy for a printed barbell. Use a 6mm x 300mm aluminum rod in place of the…
I split the scarfs in half and added magnets. I alternate the magnet orientation per side so the scarfs only go on one way. I used these, but any 6x2mm magnet is fine.…
Tested and printed in Colorfabb XT Black , recommend for PETG . One piece, simple operation.
Dual split shaft collars are mechanical clamps used to secure components—like bearings, pulleys, or gears—onto a shaft. This 3D printed double split shaft collar utilizes m3 nuts and screws (m3x12) ( https://amzn.to/435tkve , aff.) for…
Here are some collars for your Yakgear parking pole that will keep your rope from sliding up and down the pole, watch the video for instructions on how to use them.. https://www.youtube.com/watch?v=80RvurEKz3c&t=37s Print Settings…
Dual split shaft collars are mechanical clamps used to secure components—like bearings, pulleys, or gears—onto a shaft. This 3D printed double split shaft collar utilizes m3 nuts and screws (m3x12) ( https://amzn.to/435tkve , aff.) for…
These HVAC Collars are much easier to install and seal than the commercial ones and cheaper too. If I did it again, I would have simplified the design and square it off with 4 corners and 4 screws - but this worked just fine. Included are…
A simple collar to limit the depth of the cheekpiece on an Accuracy International Chassis System (AICS) 1.5 or 2.0 rifle chassis. These collars allow you to easily remove your cheekpiece and then return it to the exact position you had it…
These collars can be used to adapt the Rivian frunk lid so you can continue to use it with the Rivian-Aftermarket 12 gallon frunk water tank. Print all models upside-down with build plate supports.
An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.
This project was born after my aging artificial Christmas tree started showing its battle scars, so instead of buying a new tree… I let the printer take over. This reinforced, modular repair kit is designed for artificial Christmas trees…
I recently switched from a Garmin training collar set to the Dogtra Edge RT for my retriever training. When I tried to install the included contact point extenders, to my surprise I couldn't get the contact points to grab on to the…
Hi! I made this to attach to my tripod legs, to stop me kicking them accidentally. Requires 6x M4 threated inserts and 6x M4 countersunk screws. Printed in Copymaster 3D Glow PLA Filament Layer:0.2mm Infill: 20%
Hi! I made this to attach to my tripod legs, to stop me kicking them accidentally. Requires 6x M4 threated inserts and 6x M4 countersunk screws. Printed in Copymaster 3D Glow PLA Filament Layer:0.2mm Infill: 20%
Custom stop collars for forstner bits, as I needed some precise depth holes in the middle of a large piece of plywood which did not fit under my drill press. I printed them in PLA because that is what was in the printer, and it started to…
I had a few parts missing on my Samurai. In particular, the D_collar as figured on the instruction manual was missing, so I created a part to do the work. I also took inspiration of it to get some for the rear shock mounts, but added a…
Yet another collar stay. Saw this design somewhere with chevrons. if it was your design you deserve the credit.
May need to scale it up or down. I made this model a long time ago and can't remember which white shirt I needed this for.
Replacement pivot collars for the Benchmade Mini Adamas (may work for other models with similar pivot collars). Printed using Bambu Lab Bronze PLA. Print in 0.1 layer height. Depending on your printer/settings, you might need to slightly…
A silly creation that took 5 mins to whip up, but here are collars for the "Elf on the Shelf" pets AKA reindeer. My kids wanted them and here they are. If you'd like other text feel free to let me know. I can upload other versions. I'll…
Slip a stop onto the drill bit at the depth you want, and you can't drill too deep: for wall plugs, shelf pins, dowels, blind holes in furniture and not going through the back of a cabinet. Eight stops for bits from 3 to 10 mm; the split…
These collars are designed for a standard US 6" round valve box. They were created to keep decorative fill rocks from covering up and preventing access to the valves. Though one of the most basic designs, it is parametric and can easily…
This Adapter comes in three versions: Legacy Small Small_Printed_Port The legacy version was my first working iteration. It has a printed VGA port and room for full length jack screws. It is larger than the other versions and not as…
My old eyes can not read the labels on my PB Swiss PB 8625 hex driver set. This is a set of label collars that slide on the driver shafts. Provided here are STLs for two sizes of collars: one for 3 mm shafts (either 3mm hex or 3mm…
There is a AM4/AM5 retention kit for Asetek based AIOs[1], e.g. from ASUS for the ASUS ROG STRIX LC II 120 ARGB, or ASUS ROG Ryuo 120. If used with the Thermal Grizzly AM5 High Performance Heatspreader, the contact pressure will be too…
Little dishes that slip down over the neck of an oil, vinegar, soy sauce, syrup or wine bottle and catch the drips that run down the outside, so they never reach the shelf or the tablecloth. Slotted fingers grip the neck; tuck a ring of…
The SubZero mixer boards SZ-Mix04 to 08 have great quality on minimal space - but sometimes when you're not a professional or you are in hurry, you won't find the right knob to bypass the important channel on the mixing console - or, even…
Heavy-duty two-piece clamp collar assembly for high axial holding power without marring the shaft, secured by high-tensile socket head cap screws. Прецизионный быстроразъёмный валовый хомут-фиксатор: две полумуфты с прецизионной расточкой…
May need to scale it up or down. I made this model a long time ago and can't remember which white shirt I needed this for.
These collars are designed for a standard US 6" round valve box. They were created to keep decorative fill rocks from covering up and preventing access to the valves. Though one of the most basic designs, it is parametric and can easily…
Custom stop collars for forstner bits, as I needed some precise depth holes in the middle of a large piece of plywood which did not fit under my drill press. I printed them in PLA because that is what was in the printer, and it started to…
An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.
My old eyes can not read the labels on my PB Swiss PB 8625 hex driver set. This is a set of label collars that slide on the driver shafts. Provided here are STLs for two sizes of collars: one for 3 mm shafts (either 3mm hex or 3mm…
This is a low profile clamp wrench for Rugged Suppressors center fire rifle locking collars. This will work with Surge, Razor 556 and 762, Micro, and Radiant models and their new RUM HUB adapter. This is a remix starting with a trace of…
Lock your gains with precision and style! This 3D-printable Dumbbell Collars / Barbell Clamps Kit is designed to keep your weights secure and your workouts smooth. 3 different sizes: IN_DIA 31 mm × L 50 mm – ideal for standard dumbbell…
Made these to help identify our kids toothbrushes quickly and easily. Permenant marker kept coming off, tape never stuck and toothbrushes never got put back in the right place in any storage system. Made these and kids have never mixed…
I decided to print a strings worth of chinese lantern light cover contest winners linked below - but the original design relies on the light bulb insert for holding the light covers in place. The slightest breeze would knock them off and…
The Douwe Egberts coffee jars are reusable and I designed a spoon support that clips on the neck of the jar. I tweaked the design to accompdate a wider range of spoons. The model is easy to print in PLA and does not require supports.…
Locking Collars to keep Pneumatic Tube from pulling out of Push-to-Connect fittings: Detail #01 is for 1/4 [in] Automation Direct Push-to-Connect pneumatic fittings Detail #02 is for 3/8 [in] Automation Direct Push-to-Connect pneumatic…
I was making a Display Base for Lokis Chitauri Scepter , and I needed some collars that fit on the tubing. Since the display base design doesn't include the collars, I designed some of my own. The end connectors are meant for attaching…
