Liczymy pasujące modele…
This design replaces the smaller side compartment on Toyota Tacoma 2005-2015 models. This model includes a latching door mechanism based off of the latches on the two larger side hatches in the bed and off of @AP_81926 original model for…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
I love my Comandante manual coffee grinder but I always forget to how many clicks I had set my burr, especially when switching between coffees and brew methods. So I created this little counting gadget in Comandante style. It makes a nice…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Transport cap specifically designed for the Comandante C40 MK4 coffee grinder. A slot is provided for a 4mm diameter and 1mm height magnet to securely hold the cap in place. Available Files: File formats: STL Printing Instructions: This…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
---------Update 2/27/25------------------------------------ Added version compatible with gen 3 dimensions. Updated base to fit new phone dimensions (Samsung Galaxy A54 5G). This can be modified to fit your phone but should fit a range of…
Wydruk około 8,34 €–10,20 € nettoWstępna wycena jednego wariantu
A common problem on older Mercedes Benz radios and navigation systems is the degenerating rubber on the knobs. While it is possible to replace the knob, it is necessary to dissasemble the whole unit. As a quick fix, i designed this…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have the hand coffee grinder Comandante MK3, you propably know the problem of beans getting stuck in the center where the crank is attached. The funnel (my first 3d object for printing) covers this recess and enlarges the bean-drop…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
My clock was no longer functioning so I modeled a cubby to replace a broken clock on a 1st Gen Toyota Tacoma. Enjoy! p.s. I recommend printing on its “back”, which results in a faster, cleaner print, with much less support material. Print…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
This knob replaces the bed cleats, adjustable torque knob. This is only the model for the knob itself not the torque spring. Compatible with Toyota Tacoma 2005-2021 models.
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Impression en PLA 0.3mm Draft
Wydruk około 6,13 €–7,49 € nettoWstępna wycena jednego wariantu
Annoyed by grinds getting between the support and the shaft of your Comandante grinder ? I am. So first thought was to print a cover. Than I realised if I'm making a cover I might as well print a funnel too. Why not mix them. Well here it…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Update: V2 is here https://www.printables.com/model/233329-comandante-c40-drill-adapter-v2 But V2 needs nut and screw. This V1 has issue where drill counter toque is act on the inner shaft stabilizer (the 3 thingy inside the grinder),…
Wydruk około 6,39 €–7,81 € nettoWstępna wycena jednego wariantu
Ho creato un sopporto per il telecomando del garage. Le dimensioni sono compatibili con gli scomparti standard delle vetture per il trasporto delle bottiglie.
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
SUPPORTO PER TELECOMANDO APRI CANCELLO WHY EVO PER PLACIA PORSCHE CAYENNE 3 SERIE
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This gas cap holder fits gen 3 Toyota Tacomas. I recommend printing it PETG or some other material that can survive higher temperatures. PLA will probably warp and become brittle over time.
The Phoenix ship from 70´s japanese anime series "Gatchaman" or "Battle of the Planets" or "Comando-G" acording to each country. I have tried to simplify the design of the pieces to facilitate their printing and assembly. ¡¡The video of…
The Push-Lock Pins that you can buy from the store are made of Nylon, but I seem to be having success with PLA as it's what I have on hand. PETG may also be a good option. I've been printing with .2 layer height, 100% infill, automated…
Remix of Desert Dave's "Taco Sauce" holder for MMU2S. Intended to be printed face-down to minimize support material and purge tower height. I used Prusament Chalky Blue and jet black. It's not a perfect match for the Cavalry blue, but…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
Modified to fit 2nd gen tacoma. slide in the tab on the right side first to get a firm hold and then use the screw to secure it in place.
You should print in PETG just for heat/durability purposes. There are two versions one that just slides in (minimal) then another that utilizes the screw hole and can be mounted via Toyotas screw (no drilling or modification needed).
Note: a revised overkill version exists now: Original model: Includes a model for the front and rear seats. EDIT: Sep. 8, 2024 - Added a “rear middle seat” hanger with enough droop to reach under the middle seat head rest. Headrest peg…
I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…
My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a…
Do you fill your Tacoma with petrol or Taco Sauce. Well? Tell the world!
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
NOT TO BE SOLD BY FRONTLINE FOAM, BLASTERGUYS OR POTATOFEEDERNERF The famous Super Drum 70, but easier to wield. Assembly is exactly the same, but uses less hardware. the main benefit of this is that you can use Super Drum 70 HW kits for…
The front cup holder uses a smaller rubber holder that get stuck on bigger cups. Made a larger cup holder. I made this one big enough to fit Stanley, Yeti, Corckcicle and other larger bottles and mugs. The insert can shrink the hole size…
Badges for a 3rd-Gen Toyota Tacoma. TACOMA, SR5, and V6 emblems are already sized and ready to print. I made these models because I want to print them in black ABS, because I can only find chrome badges for sale, and the OEM Badges I…
Matches the shape of the OEM phone cubby. To install: Print as you like. Put the 15W magsafe charger in position. The 25W will not currently fit this model. Press the cord into place on the back, minding the bends. If taping, place 1-3…
2016-2023 3rd gen Toyota Tacoma TRD Pro.
NOT TO BE SOLD BY FRONTLINE FOAM, BLASTERGUYS OR POTATOFEEDERNERF. The middle ground between the Super Drum 70 and the Super Drum 34. This magazine takes the same amount of hardware as the Super Drum 34. If you want to sell the Drum or…
Print it upside down so you don’t need any supports, I just kept it right side up for the picture. I printed it in Pa6-CF at 20% gyroid infill. I didn't do PLA because I have heard that PLA melts and warps in hot vehicles overtime. About…
Replacement Toyota emblem for a 2nd generation (2005-2011) Tacoma. The back "fill" piece has two slots built in for cable ties to pass through to secure to the grille. I have included a 1 piece file which you can do a layer change on for…
This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…
Note that this will fit 2024+ Tacomas only! The Tacoma has a lot of space in its center console, but it's deep relative to its width; a tray insert makes it a lot more usable. You could buy a similar part, but why buy when you can print?…
There are two versions, one that can be screwed in or another without holes that you could maybe use 3M tape.
I designed this because I i use my truck around the farm and don't want to wear my seatbelt when driving low speeds and when I'm in and out of the truck, Tested with 3rd gen Tacoma only. THIS WAS NOT MADE TO OVERRIDE THE SAFTY FEATURES IN…
This is a simple bed hook that fits the 3rdGen Tacoma stock bed rails. Twist it 90*, insert it into the rail and rotate it up. It should be tight enough that it doesn't slide around. I printed it with 6 walls and 25% infill. That may be…
Hi all! I created this UV5R Radio mount for my 2010 Toyota Tacoma TRD Off-Road. I printed it face down without any issues. It is designed to be used with the belt clip provided with your radio. I added 3M automotive mounting tape to the…
fixed the thickness on the hood and roof for resin printing. Category: R/C Vehicles
Fits into the empty slot on the driver side and serves as a nice little drawer
This is a remix of Maker__Guy's awesome Chick-Fil-A Cup Holder. I made this for my Toyota Tacoma and the little rectangle holder. I modified this in TinkerCAD and printed in PETG on the Raise3D N2+ Full video is available here to see it…
It is so easy to find this shaft broken in the joystick pad of the mercedes E class and C class. You can print this one and save yourself $200.
As disappointing as Comandante is as a brand when it comes to dealing with its competition, I bought my c40 a while ago and while using it for espresso, I realized that I wanted half steps, even with the red clix (very expensive) mod.…
One of the few negatives of first gen Tacomas are their door handles which are known to crack. Some of the non-OEM handles are made out of a materiel that does not hold up in freezing temperatures. After snapping a handle this winter I…
Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…
The ones you can purchase are cheap and work well, but in a pinch why not just print a few? I used PETG for it's flexibility and printed at a 45º angle to not have weakness at the layer lines. Two of the files are straight up and two are…
This will fit in the switch blank locations on many early Toyota models including the 1st Gen Tacoma, 3rd Gen 4Runner, and Toyota Pickups (plus others). Fits one standard size Bic lighter.
A very rough 3D Scan of a Hot Wheels Tacoma. Feel free to remix it to make it better
1:16 Toyota Tacoma This is the second model I scale down to 1:16. This model is a lot harder to print and assemble then the 1:16 80's Dodge RAM , but has a lot more to offer! It is assembled with common M3 hardware, has a working hood…
This is a vertical DIN rail mount for MDT's amazing cookie-like KNX field devices. I'm using it with binary input modules but it is probably compatible with the rest. If not, I have uploaded the CAD file so you can alter the dimensions…
These are made to be pressed into the gap on the inside door handle. Print this in TPU! If you print it in any hard filament it likely will not fit! It's designed to be a tight fit that the TPU can squeeze into. Occasionally they may…
This is a Remix of a Mag Safe Charger for a 2024 Tacoma. 3D Print Face down with no supports needed. PETG or ABS/ASA recommended to prevent melting in the Truck. The Mag Safe charger wire can be hidden in the print. Use alien tape in the…
Remix scaled to 115% and the long edges flared to fit the profile of the ARB Safari snorkel for the 2005-2015 2nd generation Tacoma (part no. SS171HP ) Category: Automotive
Toyota Tacoma Lunar Rock Wall Art Silhouette model. Adjustable size.
I got tired of my snow shovel sliding around the bed, so made some simple hangers to mount the shovel to the OEM strut rails. Includes two (2) types of strut blocks: T-Slot Block = Most secure, but must slide in the whole way. If you have…
Tacoma (3rd Gen) Cup Holder Adapter for Yeti
I have a 3rd Gen Toyota Tacoma that also has a glove box organizer by JDMCAR that uses Joshua Dennis' Toyota Tacoma Glove Box Drawers . My dad recently got a 2024 Toyota Tacoma and purchased a JKCOVER Glove Box Organizer . He liked my…
My wife's 2010 Toyota Tacoma center console latch broke (the little pieces that hold it in snapped off), so I took the part, some calipers, and sat down at my computer to CAD up a new one! Took a few iterations, but the resultant part…
Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…
Cap with integrated crank-clip for the Comandante C40 (Mk4) The cap uses friction on the inside of the grinder (i.e. the metal not the wood). There is sufficient clearance so the wood veneer should not be touched by the cap. Make sure…
Thank you all for the downloads and likes, will continue to post more designs :)
Thread in adapter and funnel for the 4.0 2nd Gen Tacoma Funnel is from https://www.thingiverse.com/thing:980665/files Category: Automotive
My OEM key fob broke, turned into a good FreeCad lesson (file included). Simple rugged design, prints well as 1 piece, trim the sprue and assemble with 2 M3 wood/plastic screws.
I've been grinding a lovely single origin yirgacheffe lately, but as the beans are small I've had a few of them get stuck down in the gap around where the grinder handle fits onto the burr drive axle. I've also had the occasional bounce…
The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap…
This model was developed with the purpose of creating a modular system that can be used to mount things on the truck bed rails of a 3rd gen Toyota Tacoma. Developed in association with LineArcLine, the system features a T-clip system that…
Comanche chief - Rider of the Endless Horizon
A mount relocation for people looking to mount the gen 3 Tacoma camera to a flat panel
A taco hitch cover for your Taco
This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.
Description Replacement grille letters designed for most 2016–2023 Toyota Tacoma TRD Pro–style grilles. These letters were modeled as a functional replacement for the OEM grille lettering. To make them easier to print, I left out the…
These models can be used to replace the switch covers located below the radio unit. There are a few variations: Blank Press fit USB (may require super glue) Microphone (using standard aftermarket radio microphones)
This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…
There are two sizes to accommodate thinner thicker phone cases. I am more than happy to make variations for whatever size you need! STEP file also available for your editing needs! Print in ASA, ABS, or PETG. Needs to withstand heat and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made this holder for holding 3 remote controllers. Amazon Fire TV stick SONY Remote Commander RM-PLZ530D Sharp B047JB I used the Reprapper Silk PLA filament . However, you should use the Reprapper PLA+ filament . These filaments are…
Triple switch plate for the cubby to the left of the steering wheel. Fits the tall Toyota push button switches. Category: Automotive
Eye hook for 3rd Gen Tacoma. This is a very tight friction fit clip for Gen 3 Tacoma bed rails. The hole is not super huge but should allow for most netting clips and bungee chord. 6 walls and 20% infill is recommended.
Replacement knobs for the Toyota Tacoma 2018-2020, 3rd gen
This is my very first attempt at fitting a 3D design to a real object. It's a magnetized lid for my coffee grinder the Comandante C40 for when I am traveling. I made a chamber for the magnet with a HEXA pyramidal roof that will bridge…
This is a pair of mounting adapters (driver and passenger side) for Toyota vehicles designed to accept tweeters with 1.75" diameters like the Focal in the picture. They typically mount in the upper front doors. The tweeters snap in with a…
Cup holder I made after printing a model from Pahls_racing ( https://www.thingiverse.com/thing:4051379 ) that didn't fit in my Tacoma. I made one hole big enough to hold a 30oz Yeti cup and the other to fit a water bottle or aluminum can.…
I didn't like any of the existing dash mounts for my cell phone, they all looked big and bulky sitting on the dash or in a cup holder. I designed this to follow the lines of my 2013 Tacoma dash. It use the RAM mount ¼ ball system, along…
I printed philthyfool's design, and it's nice, but the cap kept dropping out of it. I wanted a screw thread for positive retention, so I re-built it in Fusion 360, and added a screw thread (45mm outside diameter, 41mm inside diameter, 7mm…
Like my front end version here is the 3rd gen taco keychain or not!
I decided to remix this because I wanted to use my CB Style Mic for my Midlands GMRS radio in my tacoma. Print Settings Printer Brand: Creality Printer: CR-6 SE Rafts: No Supports: Yes Resolution: .2 Infill: 25 Filament: Overture PETG…
Heads up: the knobs look the same size, but the drive knob is smaller by a hair! Choose your filament and layer height to match your desired end quality. The bottom of each trim ring has tiny retention tabs. When installed the trim rings…
Fits 3rd generation Toyota Tacoma in the engine bay right next to the existing fuse box. This was designed for the Blue Sea Systems 6 circuit ST Blade ATO/ATC Fuse Block and 187 Series Panel Mount circuit breaker. MUST be printed with ABS…
Klasická vykrajovátka…..tiskl jsem Petg i pla
The radio buttons on 3rd gen Toyota Tacoma are smooth, small, and difficult to quickly access when driving. This press-on knurled button cover simply presses onto the existing button to provide a larger and and easier-to-grip knob. No…
Glovebox was rattling so made this to work with the 2025 Tacoma it should work on any 4th gen Tacoma. Print face down arrow points towards seat when installing. Print 2 (One for each side) It is a snug fit, I tested in PLA and did final…
After using my first model for two years, the clip tabs finally broke. I've now uploaded a second version that's easier to print lengthwise for better tab strength. I recommend PETG or ASA since these are for outdoor use! Should fit…
Updated! Please see https://www.printables.com/model/579719-updated-toyota-tacoma-tundra-fuel-door-latch-post for the latest model! Should fit Toyota Tacoma from model years 1995-2020 and the Tundra from 2002-2006. I'm going to print mine…
Simple 3D printed mount for 2005-2015 Tacoma's with the Garage Door Opener flap in the overhead console. It discretely hides an Auxbeam 8-Gang switch panel away from view and is super solid when down. Allows for a stealthy installation of…
This mount will work for the ScanGauge II device on 1st Gen Tacomas, and should also work for 3rd Gen 4Runners. It is designed to mirror the mounting slides on the stock ashtray, and clips nicely into place when fully seated. The gaps in…
Printed in petg, .15 layer height, 35% infill, 4 shell perimiters. Vertical protrusions can be trimmed down with a razor blade to accommodate cup holder size to your liking.
I printed them in TPU without supports. The fit is very tight by design. I pressed each plug partially into place and then whacked it with a mallet to seat it fully. 3 sizes. I'm leaving the two lower holes open for now for drainage and…
The title covers it. Snaps into place. Arrow points up :) You'll want to use PETG or better for heat and UV resistance, PLA will not last in the heat.
PORTA TELECOMANDO Realizzato:www.webtessitore.it Pubblicato: https://www.thingiverse.com/thing:5019795 https://www.prusaprinters.org/it/prints/135150-porta-telecomando-singolo IMPOSTAZIONE DI STAMPA Stampante: Creality Ender 3 V2 Nozzle:…
