Liczymy pasujące modele…
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
WARNING: PLEASE READ BEFORE DOWNLOADING This model is not for beginners. There are many interlocking pieces and minor tolerance issues can quickly multiply to create a non-functioning door and/or lock. If you decide to build this, please…
This is a holder keeping your combination squares or rulers nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The model was designed for squares / rulers with a thickness of 2mm. If this is useful to somebody, I can upload…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
I wanted some nice Gridfinity holders for my combination square(s), so I made this model :) There are two variants: "OneSquare" holds one 6 inch or 150mm combination square + pencil, eraser, lead, or sharpener. “TwoSquares” holds two 6…
This is a combination of the " Prusa Buffer Filament feed " and the " EZ Load Prusa Buffer ". It enables the buffer to be opened easily and at the same time the PTFE tubes are not pressed in by the screws thanks to the PC4 fittings with…
For my use these don't need to occupy 2 different places on my desk. I use the Magic Trackpad 2 for gestures (mainly), and I use the 3D Mouse for a few specific programs. I really like to keep them both to the left of the keyboard so I…
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
This is a remix of Combination Safe 00 . With this remix I have tried to make my original cryptex more accessible to the visually impaired, that said, not all the changes are exclusively of benefit to the blind or partially sighted. The…
Printed using a Mk3S+ on PLA, PETG as well as ASA-X on 0.4mm nozzle on 0.2mm layer hight, takes around 1.5 hours with default settings @15% Infill.
Koppelclip / Verriegelungsclip für Fliegengitter- und Verdunkelungsrollo im Wohnwagen Ersatzteil für Kombirollos bestehend aus Fliegengitter und Verdunkelungsrollo. Der Koppelclip verbindet beide Rollos miteinander und ermöglicht…
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
I lost bag of yeti wrench holder. I design new holder for YETI 26911282 Combination wrench set (14 pcs/set; 8-24mm) Should print with PETG without support
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4x2x1 odd shape for 6" Harbor Freight Pittsburgh Combination Square.
This is an attachment that allows you to use the Dyson combination tool with the Rigid 18v hand vacuum.I know this is a very specific tool, but I always try to share things I make because you never know if someone else has the same…
Note: This is just a proof of concept and you shouldn't really use it as an actual lock Assembly: Take the locking wheels (the numbered decagons) and insert ONE locking pin in each locking wheel (insert the pins in the slot corresponding…
První verze krabičky na kód - připravuje se druhá Sesvavujte podle návodu (podle fotek) Šedé kolečko s otvory (krok 3), přilepte k velkému černému dílu. Dále přilepte v 5. kroku šedý díl s výřezem ke stejnému černému dílu - válec by se…
I was looking for a good vice and pinning tray as I go deeper into locksport. My printer is too small to make the the regular vise base but big enough to make the small base. To limit any possible instability, I was going to expand the…
Gridfinity bin 2 x 5 x 4 for Knipex Combination Pliers - 03 02 180
I made a wall with magnetically held marking and measuring tools directly above my main work/marking bench. I find that being mostly a power tool woodworker, measuring and marking tools need to be in easy reach. If my 500mm ruler is in a…
I own several of the smaller Wera Joker combination wrenches (bought them all separately) but I had nowhere to store them properly. This is my solution. It holds the first six wrenches in the 6003 series. This includes: 5.5 6 7 8 9 10 I…
I find this shape G shape ideal, as you twist it around the plant stem to secure it in place. These can mount on bamboo or dial rods from 2.5mm to 10.5mm and come in 0.25mm increments. This diameter is printed on the side of the brace. I…
This is a remix of Combination Safe by ChuTec_Engineering_Solutions ( https://www.thingiverse.com/thing:1939676 ). I liked the idea of the combination lock. But the box itself looked too much as a toy, too much simple. So I created my own…
This holder construct from FreenchCleatBase and CombinationSquareHolder. HolderBase is for customizing. You can customize whatever you want. It may be tight to slide in the holder to the base. I recommend to tap lightly with a rubber or…
I combined the opener part of the PRUSA BOTTLE OPENER and the lid part of dede67's Beer Bottle Lid into a cool new bottle opener that can be used to open and close bottles with crown caps to protect it from stuff like dirt, wasps or flys…
A fun storage box with a locking lid that requires a 3 digit combination to unlock. The lid functions as a standard dial combination lock that you can set the code for yourself during assembly. The only non-printed parts that are required…
I believe, that I created my usefull Removable Combination Butterfly Corner Code for everyone, who need connect a some stuff, like furniture, shelfs or some DIY projects. I tried to design a very minimalistic and simple design of my…
Combination Depth Gauge and Centre finder. Fits a standard 300mm 12inch steel rule. I also use it to mark the corners of boards I am insetting into a wooden border. It uses a 5mm brass heat insert, inserted from the back so it hs extra…
Both a Nobel prize winner and a child can learn with this model. As a child, I've seen a safe-type combination padlock but could not guess what is inside. Years later, Feynman explained it to me in his book. It was a double pleasure: I…
Combination Square Set 3D Printed Holder Tool boxes are expensive and take up floor space. So I came up with the Wall of Tools If you’re are welding, wood working, milling or lathing. One of the first tools needed is the combination…
Physics C Electromagnetism, a demonstration of circular magnetic field vector combination, calculation of forces
This is a Gridfinity 3X2 socket holder that holds up to 6 adapter sockets. This holder is designed to fit the Snap-on 6 pc Combination Square Drive Adaptor Set MPN: 1206GS. This bin has the standard magnet pattern on the base since I am…
I've designed this wall-mount bracket for the three Empire Combination Squares (6", 12", 16") that I own. I ran through two iterations, given the following constraints: Physical Securely fit all 3 square sizes, without creating unique…
ENGINEER spanner set holder for gridfinity. 3 x 2
A combination square holder Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: Doesn't Matter Category: Tool Holders & Boxes
Adding a compatible screw and bolt for the padlock. As the rest of the lock is already made out of plastic we might as well make everything out of it, including the bolts. I've successfully printed this to fit the padlock. Printed upright…
Avant toute chose, toutes mes félicitations à Rocco's Stuff pour cette excellente conception et pour le plaisir que procure l'impression et le montage de ce modèle. Comme le précise Rocco's Stuff, ce n'est pas un modèle pour débutant ; sa…
I lost bag of yeti wrench holder. I design new holder for YETI 26911282 Combination wrench set (14 pcs/set; 8-24mm) Should print with PETG without support
I needed a blank for the extra tools on a combination square set so I made these.
Testing how transparant Cyan, Magenta and Yellow (or similar) filament combinations turn out by stacking two of them on top of each other. All 9 combinations are made in a frame which means that there are redundant combinations. However…
Concentric Combination Puzzle Box - Viking Style I have wanted to make a puzzle box that used concentric rings for a long time now, and finally settled on a design that also allows the owner to change the combination at will. Three…
The Alchemist's Cube A combination lock box with mysterious appeal This puzzle box features 4 dials, each with 8 alchemic symbols. Line the correct symbols up to release the core, lifting the core out reveals a hidden compartment, perfect…
Set your own value on the the puzzle. Check the photos for assembly. You Printer should have an accuracy of +/- 0.2mm Recommend using PLA. Print everything vertically. Print 1 x Key, Sleeve & End Plate Print 3 x Rings & Dial. Assembly.…
6x6 Gridfinity tray for Blue-Point Ratcheting Combination wrenches Design based on injection molded tray that originally came with my wrenches. Printed on my A1 using the Smooth PEI Hot Plate with no warping or lifting issues using…
Designed for a Creality Ender 3 or similar, that has a 6.25mm knurled shaft that sticks out 12mm from the panel. It's inspired by the combination dial (see remix), but that one's for a much shorter shaft. Designed in OpenScad. Uses the…
All of the combination/boxwrench french cleat hangers I saw were made for much nicer toolsets than I have. Not sure if this will be useful to anyone else, but maybe you can modify the FreeCAD (v1.0.0) file for your own purposes. I left a…
A 3x6x4 Gridfinity bin to hold the wrenches from the 7 piece wrench ratcheting set from Husky
This is a three tumbler combination lock safe that I designed in Onshape. The whole thing including the screws can be 3D printed. I've included both preconfigured 3mf files that are ready to slice and print. But I also included all the…
Combination Square 150mm. Removable ruler 150mm long and 5mm pitch. 90° and 45° square.
This is a fully functioning combination lock designed to resemble the look of a heart. You can decide which wheels to print to determine the unlocking combination. The complete lock, with all color changes and components, takes only 2.5…
Printed in Petg, 0.2 layer no supports 10% infill
Simple double combination square mount for the GOEWS system. Couldn't figure out how to add clearance for the screw locks without too much complexity, but I don't think it needs it. If you orient the print well, it should not need any…
It combines what I imagine futuristic soldiers to look like with the added features of the iconic Master Chief suit from HALO. The larger it can be printed the better as there's some fine detail in the hands. I might revisit this later.
A simple multiboard holder for your combination pliers. Works together with a Multiboard Snap: https://www.multiboard.io/parts-library/snaps No supports needed, printed with PLA.
the famous “thursday the 20th” sign from the Simpsons. With tiny holes for a string or similar. You can also create whatever combination you want. Just print the date, weekday and 2 blocks for fitting, then glue everything together. The…
I designed these screen combiner clips to fit my dell 24 inch Ultrasharp screens, but it will probably fit other sizes as well. Let me know if and what size screen you tried! Settings: Infill: 20% Supports: No Category: Office
Multiple combinations of fireplace, kettle and firewood for DnD and other TTRPGs, for a 25 mm/1 inch grid. It is FDM friendly. I printed it with an Ender V3 KE. However, printing the fireplace with anything attached, may be more…
For holding the Edge location tab kit that comes with the Fireball tool combination square. Fits in your toolbox! Was going to make toolbox gridfinity but am busy building other stuff. Printed mine 15% gyroid infill, PLA
This tool wall holder is designed for 30cm (12") combination squares, providing secure, upright storage on your workshop tool wall. It cradles the square firmly to prevent slipping, scratching, or accidental falls. Mounts directly with…
This tool wall holder fits small combination squares, sized for 100mm (4") and 150mm (6") models. It securely holds your square upright, protecting it from scratches, slipping, or damage. Mounts quickly with two screws for a clean and…
I originally saw this model from ScoobyDoo27 on printables but it was taken down but I really liked the modular part of it but I didn't like that my wrenches where really loose so I remixed it so I can add a magnet and so It can work with…
Children's combination pliers Suitable for Bosch tools adapted for the screws from Bosch / Klein with a wrench size of 20mm Accessories: a nut M3 with locking paint or a self-locking nut, as well as a cylinder head screw M3x14 or M3x12…
Is your Stanley 50 combination plane missing the depth gauge? If so, here is a 3D printable replacement. I would recommend printing this in at least PETG as the model is thin to allow the greatest depth possible.
A combination square 45 and 90 degrees with larger flanges to sit better against the round edges of rhs and shs I used the ruler and screw from the renegade combination square the part also has a hole at the base to accommodate the scribe…
This is a modular version of my low poly dragon that allows you to create over 240 unique dragons ! For a quick start, i added the stl files for the combinations seen in the product images as stl files. (“Finished Showcases” folder) You…
Securely holds your SD cards without the need for an extra sleeve or case. Press the clip down and slide the SD card in or out of the slot. The clip will click into place when the card is inserted and pushing the clip back when removing…
The second iteration of the scoop and funnel combination. The capacity of the Scunnel is 1 fluid ounce. The funnel is designed to fit into typical soda bottles.
GOOSKY RS5 / RS6 - COMBINATION OF TWO PARTS GT060047+GT060048
This is a Harry Potter themed strongbox with a programmable 8-digit combination lock. The lid is held firmly shut by the powerful locking charm Colloportus to ensure that only one properly schooled in the art of witchcraft and wizardry…
NOTE: This is for the AMZ version 1, the new Mega Zero v2 seems to need the mounting point resized a bit before this will fit. The FreeCAD project is included if someone else would care to remix things to fit that version, or I may try to…
Unfortunately my advwin base was different dimensions to the other options out there so have made my own with some amateur 3d modelling skills. I also added alternate connector slots on the base to allow the feeder to be placed to one…
Tray to hold a complete set of imperial standard combination drill/countersink cutters, sizes #000 through #8. I needed this when my collection went beyond the common #1-5 sets. The side walls are high enough that you can stack other…
Model Description This is a unique pencil case with a rotating combination lock. It is designed as a secure storage tube for pens, pencils, or small items. The body length is about 180 mm with an inner diameter of 50 mm, which fits…
A simple holder for 11 combination wrenches. Designed around an old Performax set.
This is a 3D printable protective cover designed for CEE combination sockets (red 5-pin 400V industrial connector + standard 230V outlet). The cover serves multiple purposes: Aesthetics : hides the socket and gives a cleaner look for…
Honeycomb storage wall holder for Combination square . Holds the tool securely, Tool can be easily picked from the holder. Available as right and left handed versions. Has a standard hex insert for attaching to HSW slot. Recommend…
Needed to reset the combination on a master 178 after decoding it and I didn't have the tool. I took measurements of the keyhole and did some guessing based on photos I found online and made this small key that works just like the…
combine brio train tracks with duplo plate bricks.make sure you print out all 4 different sets for maximum flexebility. have fun :-) Brio Holzeisenbahn Schienen gerade mit Duplo Platte als Untergrund. Vier Typen unterschiedliche…
BLUF: Make literally any five character combo you want on a MasterLock My brother and I design and build escape rooms that we subsequently inflict on our friends and family. We were immediately therefore intrigued by a combination lock…
this is a modular pinboard / pegboard combination which i modeled and built for my AS design and technology project. it was printed using the prusa mk4s. The segments were printed using PLA but the attachments were printed using TPU…
Only one drain available but both washer and dryer needed a drain, so a combination had to be printed. Also available at OnShape for your own modification:…
My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…
Needed a gridfinity bin for my Combination square. Couldn't find one I liked. I built this one using the OpenScad generator found here:…
Primarily made for Multiboard mounting combination wrenches that include a set of 9 Imperial and Metric wrenches. The “Shrinking” model decreases the hook size by 2mm each iteration while the “Static” model similarly shrinks for hooks #1…
Same mount adapted for SKADIS Click Mount by Ryan Tuscher Works for 300mm square
Craftsman style Combination box/open ended wrench set. 2x4 Gridfinity size Sizes: 1/4 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 "FootFinity" model uses “foot” style created by @dbt85. My printer works best with 4.9mm diameter “feet”…
The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the…
The design is optimized for easy grab and go retrieval and replacement of the tool. It self-aligns the tool and provides security from knocks and bumps. It fits standard US 1/4” pegboard on 1” centers. Mine is printed in PLA and utilizes…
This has 2 models. One is wider, and likely more universal for any combination square, the second is smaller and works well for mine, but I was worried it might be a bit more challenging to quickly hang the square, but so far I have been…
I used the two models (thanks to the authors) and printed them in different filaments (white web and black spider). I did not change anything in the original models, just scaled them in the slicer. The resulted print however is a very…
I needed a holder for my Empire 6 inch combination square so I designed this. It may work with other 6 inch squares can always adjust the scale if need to.
Mount I designed for my 12 inch Craftsman combination square. It might work for other 12" squares as well.
This deckbox lid uses the same magnets as the original model. You will need to set up the colors, but each part is named for what color it should be to make it easier for you. The mana symbols are only 0.8 mm thick, so you could manually…
This is my take on a combo dice storage and and dice tower for family and friends who are Dungeons & Dragons fans. As supplied, the box works well for D&D dice sets based on a 25mm D20 die. The Fusion 360 source file is included and makes…
4x2x1 odd shape for 6" Harbor Freight Pittsburgh Combination Square.
