Liczymy pasujące modele…
RadioMaster Gimbal Stick Ends Set Unless specified and/or for heat set inserts, all stick ends are designed for flexible materials. i.e. TPU, TPE, etc. In case you need some clarification: M3: Radiomaster Pocket, Zorro, TX12 Jumper T20,…
This is a remix of @Digitex https://www.printables.com/model/480267-nail-holder I added space for the magnet Magnet size is 6*6*2 mm round magnet 修改檔案來源 @Digitex 我新增了磁鐵的空間 磁鐵尺寸是6*6*2 mm的圓形磁鐵
BIG SHOUT OUT TO PO-WEN CHIU, thank you for the inspiration for this awesome design. Hello everyone I have remixed the original Lightweight stealthburner and added some more material around the neopixel. Kept having trouble with the tabs…
V1.1: Duplex Folding Stock & Brace 2020 Conversion Replace "Arm" piece with 2020 Aluminum extrusion. V1.2: Duplex Folding Stock & Brace Push Release Edition Allow for faster folding to either side/ complete removal of stock arm. Update…
Full 2024 f1 calender wall art with dates, never miss a race!!! Print face up using 3 or more colours for the best results
Recommended printing orientation for the icosahedron is to lay it flat on one face and use manual support painting on any large highlighted surfaces. This avoids getting support material into the tiny holes. Users of Bambu Studio can load…
Update 1 - December 1, 2025 New shades added for Christmas Nativity , Hanukkah , and Kwanzaa . Details in the “Shades” section. Update 2 - December 5, 2025 Shades: 11 new designs added, including LEGO Santa , holiday sweaters , cocoa cups…
Thanks to @Mike_1534993 for uploading the step file. See the difference field to find my changes.
These create perfectly evenly spaced ports for sirens in Tinkercad! You can also just use these to help u find what width to make your block to cut the ports. That is preferred, so that the port walls are straight instead of angled…
UK Google translate: Updates to Hiwin Linear Rail on PRUSA I3 MK3S+ Here are all the printed parts needed for rebuilding/updating your PRUSA I3 MK3S+ I have spent a lot of time adapting the original plastic parts so that they fit and work…
Huge thanks to my friend Demetrius for giving me his ⅓ scale federal gearbox model! All credit goes to him for that. Right now this only has the 10/12 variant, but I will later be adding single tone 12, 8, and dual tone 9/12 variants as…
Just got this trendy second-hand piece, but the cable mess was always driving me crazy. Here we go, introducing to you my solution ! Keep your cables in check with this mix of sizes and various cable slots. Show off your vinyls…
Needed stuff, made stuff. I have couple of spools slightly over 70mm width that didn't fit with the original axle so slimmed the stoppers down. Axle is basically remodeled in OpenSCAD since I couldn't mod the original STL. Also the…
⚫Crystals UPDATES⚫ Side doors and mirrors they are compatible with all crystals. But the front axle is only for Crystal 8011. FULL upgrade - Zetor Crystal 8011 https://www.printables.com/model/252938-tractor-zetor-crystal-8011-no-supports…
These dust collectors reduce the quantity of drill dust that scatters, and allows for larger bits (1 ½" / 40 mm) and angled drilling from 45 to 90 degrees, while still capturing most of the drill dust. Background: I recently downloaded…
This calendar doesn't support years. I printed blocks with letters and numbers with support, this way symbols are clear, aren't melted
This is an adapter that allows you to mount the MK4S xLCD to the outside of the enclosure. and usb protect box.
Overview The Portable Mini Weather Station is a compact and versatile device designed to provide real-time weather updates, temperature readings, and other atmospheric details. Built with an ESP12F microcontroller and a 1.5" TFT display,…
I really liked the E-Ink ESP32 Weather Station Frame designed by Kingfisher — thank you! It was exactly what I was looking for to host the ESP Weather EPD project . While the overall design is excellent, I didn't like a few things about…
Updates to muckychris 2 piece Comm Pad to be 501st CRL compliant. Added rivets to the squares and made flat one of them. White Split button has been made Flat. This is a remix from https://www.thingiverse.com/thing:1650986 Category: Props
This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…
Updates to muckychris 1 piece Comm Pad to be 501st CRL compliant. Added rivets to the squares and made flat one of them. White Split button has been made Flat. This is a remix from https://www.thingiverse.com/thing:150129 Category: Props
So I got fed up with having a set of spool centering disks since I have lots of different sized spools for my filament making/recycling setup and designed a disk that should work with wide range of spools. Probably not all but at least it…
This is part of a larger project where I am printing a complete set of these for my kids. Unfortunately, there is no “complete” set. These changes do allow some better customization of the models that have a different color paw background…
I'm always paranoid about wasting food and I mentally plan out when all my meals are so that nothing goes to waste. This little tool can help keep track of the dates that things go bad or can be used to plan your meal days. I tried to…
When you update the firmware, you have to pull everything apart. I made this little snap in place holder that allows you to access the port through a cooling vent on the right-front. Allows you to use a common microSD to SD card adapter…
Updated the sidekick cards so they can hold action tokens and accommodate Iron Bear
Update 1: I am working on a V2, although I'm unsure if I have the time to complete it for this contest. - If you have any ideas for this see the comment thread I created. Update 2: I, obviously, did not finish V2 in time. I'm almost done…
WARNING! This is not an easy print, this does NOT just go to printer and be fine. READ THE TEXT. Now with more models!
SEE BELOW FOR UPDATES AND REVISIONS! Everything works, however I am improving/cleaning up some of the models that have development artifacts. Also adding new Blocks, I'll add those as new model posting with link to this one. Assemble your…
Hello lady printers and gentle printers!! Designed some Star Wars nameplates, this is the first batch of jedi, I will be adding to it over time! The BBY dates are either canon or as accurate as I can get them with the knowledge available.…
“Laundry Bottom” file from source model needed a bigger opening to accommodate Tide detergent lid
My granddaughters love the escalator and wanted a pink and purple version. With the first build, the stairs were slightly angled. Not sure why, that didn't make sense from the design, but when I slightly angled the non-drive side…
I wanted to put numbers on a board that change for different occasions. The placeholder can be printed as many times as needed. The residents put a whiteboard up in the estate with yearly occasions. The days and dates can be simply…
I designed an additional lid add-on for the Airscape tin lid. As soon as the coffee beans are stored inside a can instead of their original bag, information such as the roast date or purchase date is lost. If it is not written down…
Discord to exchange knowledge and ideas as we keep improving IFast — https://discord.gg/VRfdQc8PVQ — (old link *** https://discord.gg/MQXRUpbvqW *** ) After conversion to Klipper I took the chamber heater to make a Filament dryer. added…
Skirt and TFT50 screen frame with an optional SD card remote reader for updating Firmware. These parts are designed to fit and blend with the original Voron 2.4 skirts. Parts Used: BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display Micro…
The Infinity Cube is an open cube frame lamp balanced on one corner on a round base. An RGB LED strip runs inside the edges behind a diffuser, so the whole frame glows. An ESP8266 NodeMCU runs it with open-source firmware. Features Full…
I'm not a morning person, so thing are a bit blurry before coffee :) Recently I started taking pills, one every morning when I wake up. Made this and works great. When I question myself I just take a look. I made xls for easy print but…
This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…
These dust collectors reduce the quantity of drill dust that scatters, and allows for larger bits (1 ½" / 40 mm) and angled drilling from 45 to 90 degrees, while still capturing most of the drill dust. Background: I recently downloaded…
Hook for 2020 extrusion - lower hook accommodates a spin-and-lock T-nut. Screw holes are for M5 screws. Hardware list: Two (2) M5 x 8mm screws One (1) M5 T-nut (spin and lock type) One (1) M5 nylock nut This can be used for hooking a…
This post includes several updates posted over time on Patreon! The original! Clackety-clack! Make some noise with this snappy, noisy skull! In-built hinged jaw is connected to a lever inside the back. Pull it back with a finger and get…
Updates to muckychris 2 piece Comm Pad to be 501st CRL compliant. Added rivets to the squares and made flat one of them. White Split button has been made Flat. This is a remix from https://www.thingiverse.com/thing:1650986 Category: Props
![RadioMaster Gimbal Stick Ends Set [New Updates]](https://media.printables.com/media/prints/741238/images/5788896_f9cd2b07-b027-47cd-9465-108f1249f600_c4f332b0-8864-4efc-9d9f-87f366e5fcc9/20240128_080743.jpg)
![[IKEA] FJÄLLBO updates](https://media.printables.com/media/prints/786359/images/6099324_03e5697a-b2d9-426a-88c5-b885e6ee6fbd_fde0790c-bbad-4b63-af6d-e86d79809625/img_20240221_165510.jpg)
