Liczymy pasujące modele…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Wydruk około 5,37 €–6,56 € nettoWstępna wycena jednego wariantu
Use random seam position + classic wall generator. A simple wearable fidget ring that works as a spinner, allowing the outer ring to rotate smoothly around your finger. Designed as a compact and discreet fidget toy for everyday use,…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Hi everyone again! Thank you for a lot of ideas, comments, feedback and downloads of my (silver winner in design contest ): v.1 Pixel Box project ! I'm so sorry you that you had to wait so long, but after a loooot of working, testing and…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I´ve been looking for a solution to not have my perfume samples lying around so they don´t leak. The available designs weren´t usable because they mostly use 1 diameter. This stepped design utilizes 16mm/14,3mm/12,3mm/11,9mm diameters for…
Wydruk około 13,92 €–17,01 € nettoWstępna wycena jednego wariantu
Speaker stand for the Edifier R1280DB. There is enough room around all edges to easiy modify for different speakers. See the attached pictures for the dimensions. This will give the speaker a +- 13 degree angle.
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
This model is for bed size 210x210 Do not scale down the model because the hinges will not work! If you have a Prusa Mini then visit this page instead https://www.printables.com/model/237266-box-print-in-place The Model is Print-in-place.…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
A simple stand for the Edifier 1280T. I've uploaded both f3d and step files for changing it to your specs.
Wydruk około 9,07 €–11,09 € nettoWstępna wycena jednego wariantu
Modifier File to add fuzzy skin to the handles only. Not perfect but works quite well. The world coordinates for the modifier are X: 0, Y: 4.30 and Z: 8.39. Takes some time getting it into the right place so make sure it looks like the…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
I had a lot of issues with the prusa original files&settings on my MK3s printers - perimeters did not stick, so lots of stringing on the inside for example. I modified my settings according to tips from Stefan of CNCKitchen and now print…
Wydruk około 15,25 €–18,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modified version of Lndnny's Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style . A fantastic case for the hexagon handle. This lower insert is modified to accommodate the Round Aluminum Knurled handle version. I haven't…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
Upload of my project from thingiverse since thingiverse has become trash! Want to try non-planar printing but don't want to remove the fans from your printer or bother setting up Slic3r Non-Planar. Try this! Using 60c bed temp and 200c…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This diffuser is designed specifically for the 4pin WOWLed magnetic 30cm RGB light strips that you can get from amazon they come in a three pack with a three way adaptor. If you print these with a translucent white filament they diffuse…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
I wanted a V-slot cover that could act as a diffuser for the LEDs I installed on my Ender 3 Pro. The original design fit in the v slot but wouldn't slide easily over the LEDs. Recommend PETG due to heat from LEDs. 15% infill used with…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) Screw the main part (ECK - Main), the “visible” holes must be vertically aligned Insert your selected cabinet knob (ECKH - *******) Turn the cabinet…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Simple LED diffuser for GU10 LED lights . I have these in my kitchen and although I love the LED lights, they are not diffuse enough. IMPORTANT: Print only 2 bottom layers and 1 top layer, or it will be too thick and light will not pass…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
French : J'ai modifié le fichier mis à disposition par Prusa pour pouvoir fixer le buffer du mmu2s sur le plafon de mon plan de travail. English : I modified the file made available by Prusa to fix the mmu2s buffer on the ceiling of my…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) This is the Halloween edition! Please, this project contains only the custom parts for Halloween. You need the main part (ECK) in my original…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
This is a standardized version of my LED diffuser I built for my enclosure using transparent PLA . It is 240mm long and has holes for M3 countersunk screws. It is for LED strips up to 10mm width. If you need another length just add a…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Diffusor / Streulichtscheibe für eine Lupine Pico LED Helm- / Stirnlampe. Das Licht ergibt nicht mehr einen einzelnen Spot sondern wird sehr schön gestreut. Ich habe zwei Varianten gemacht: einmal mit zwei Lagen und einmal mit drei Lagen…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had anti-insect essential oil diffusers in damaged wooden boxes looking like Camembert ones I designed simple octagonal box and lid with Fusion 360 to replace them. Printed on my Prusa MINI+ with Prusament PLA Galaxy Black and Vanilla…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
37mm diameter diffuser for Ledlenser P7 (P7R excluded), T7 series Print settings: Filament: Translucent filaments. Layer height: 0.3mm Supports: no Perimeters: 2 Scale factors: ±100.6% for PETG was perfect fit, In my case
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
The Modell is made out of Transparent PLA its a Powerout LED defusor layerhight 0,3 linewidt0,6 speed 15mm/sec No Fan raft and VASEmode no Bottom and Top layer 8min of print KEEP windshielded with some paper
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This is a modified version of this : https://www.printables.com/model/70791-einsy-door-with-fan but with different fan location more centered on the stepper drivers side. This replaces the einsy door on an MK3S.
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified the corner piece for Lowell Alleman 's LED diffuser . Added a small hole to let the cable exit.
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Whats you need? Mirror for FLA part.n. 5K0.857.511.B Assistent camera 3Q0.980.654 The Best choice it's index H 34 Pin 0.5mm Pitch FPC Cable Extension Max length for works without a problem is 20 cm…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
Beste Druckbarkeit mit Prusament PETG bei nur 244°C! Erstaunlich gut bei Recykeltem PETG! Geringe Degradation ermöglicht wohlmöglich erneutes Reycling! Wenn die Tasse von vorne herein nicht zum Trinken und Essen genutz werden soll sondern…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple horizontal stand for Edifier R1280DB or similar speaker with 114x145mm base. 40mm height allows raise speaker to a more convenient height. Easy to print in one piece without supports. Recommended PET-G or better (I printed from…
Wydruk około 3,31 €–4,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This diffuser is upgrade for ‘Sapphire Pro - LED Strip Holder for WS2812b’ This upgrade is easy to print, I used Devil Design transparent PET-G filament, maybe it work great with white filament YOU SHOULD TRY!
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English: Diffuser cap for the Anker Bolder LC90 flashlight. Printed in transparent Filament PM PETG. Deutsch: Streulichtkappe für die Anker Bolder LC90 Taschenlampe. In transparentem Filament PM PETG gedruckt.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple diffusor for Nitecore MT21C. Suction fit on either end of the flashlight. Vase mode Einfacher Diffusor für Nitecore MT21C. Saugende Passung für beide Enden der Taschenlampe. Vasenmodus
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Descrep supports for the Edifier MR4 speaker set that gives you the option to select from 7 different angles thanks to the little slots in the main support this way you can find the angle best for you.
Wydruk około 3,36 €–4,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Horizontal brick layers modifier Updates: 2026.09.25: I added "This Way Up" icons to the top of all of the modifier STLs because it can get very confusing very fast if you rotate a model. It is important that the modifier be correctly…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not sure the model of light fixture I have but the old clips break easily and were hard to find. Hope this solves a problem for someone.
Wydruk około 9,13 €–11,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
Про то как пользоваться этим приспособлением я рассказываю в этом видео: https://boosty.to/internal_engineer/posts/2f7f2e46-ffed-48f4-83ae-be5985ef6b76 Если у вас закусывает верхнюю втулку оси X, эта 3D модель + наждачная бумага поможет…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
4010 Mount for Ender 3 v3 se
A simple Case for the NVIDIA Shield Remote. There are two versions, with access to the Netflix button and without: “With Netflix” to have the button NOT blocked “No Netflix” to have it blocked The back is flat so the remote can actually…
I created some stand to tilt the Edifier r1280t a bit. I looks much better now (i think) Please note that i made them a little to deep so a small edge showed at the front. I stuck a piece in to thicken the back a bit so the front edge…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.
Hello everyone :) There are already many different solutions to prevent dust or small plastic parts from falling into the hole in the Z-engine. Unfortunately, none of them appealed to me so far, so I developed my own solution. While my…
Size cca 85x60x55mm. Design versions A, B, C, D. Versions for max. Phone depth 9, 11, 14, 17, 22, 27mm. Tested. Second version:
I created these files for my Wood PLA Youtube video. After you open the file you can replace test wood plank with any STL file you like. Then resize, rotate and move the modifier to get the wood grain look that you want. I will add more…
Meet Scyphozoa belonging to the kingdom Animalia and phylum Cnidaria and give him a warm welcome in your Christmas decorations. A completely different Christmas decoration this year! Simply slide it over an existing LED of the Christmas…
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Cloud Cookie Cutters - 4 different sizes Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Filament: Unknown PLA Category: Kitchen & Dining
Le support modifier est plus bas que celui d'origine pour avoir une meilleur vu de l'impression.
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
We created a differential swerve drive for our 2022-23 Power Play robot. This is the pod design we created for our robot. The differential swerve pod was designed to be mounted to a drivetrain using 40mm needle bearings and a 1/4" Hex Cap…
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
This is modifyed base for model https://www.printables.com/model/289554-meta-quest-233s-stand-kiwi-design-strap-wbattery Don't really like to hang controllers on hooks
Main features Two-part (base and cover) parametric coaster. Fully customizable. Customizable modifiers for the parts. Several predefined grid types, that can be combined, and a do-it-yourself "infill" coaster cover using the modifiers.…
I came across this calculator for an acoustic diffusor and whipped up a basic static model of it: http://www.mh-audio.nl/Acoustics/DiffusorCalculator.asp They call it a skyline diffuser. Update 12/17/2022 : it looks like this link has…
Articulated slugs from https://www.thingiverse.com/mcsim/designs 3 lengths available from short to super long. Print in place. No supports required. Individual sections are also available for remixes; i.e. head, body, tail. If you like…
Jealous of the diffused-looking light from the new Apex Neptune Sky? I am. Want to get that T5/halide look from your AI Prime? I do. I made this light hood for AI Prime HD to get rid of most of the “disco ball” effect that is common in…
As seen in my workspace redesign video above… Simple two piece wedge style speaker stand design. Trim piece snaps into the wedge and you can add some glue to be sure it doesn't move. Edifier R1280 are great budget friendly near field…
These models are simple to use, but the process is hard to explain with text. Please see a tutorial in this video:
Especially when in use with the MMU3 community edition, there is more space to the top. A wider radius on the bowden bend leads to a smoother loading procedure, what enhances reliabilty of material changes Additionally I found it helps a…
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
A disk-like phone and tablet stand, that offers four fixed standing angles: 50°, 60°, 70° and 80°. A central finger trench supports swipe-up gestures, if needed. The stand supports different device thicknesses/sizes and keeps the centre…
Stand for Edifier MR4 studio monitors. Had to make this model because I wanted the stand that will have better stability
For those unfamiliar, a differential allows two output shafts to be spun at different speeds from a single input shaft. You will find these in most cars on the road. For more info see http://auto.howstuffworks.com/differential1.htm…
This stand is designed to position your speakers at the ideal height for improving sound clarity. With a sleek and sturdy design, it's not just a stand, but a stylish addition to your desk. Key Features: Optimized height and angle for the…
Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…
Ever wanted the ability to hang that awesome print you found but realize the Designer didn't think of that? Yeah, me too! I was surprised that I couldn't find the kind of keyhole hanger modifiers I wanted “in the wild” already - lots of…
I needed a very low profile diffuser for the Daylight on Matchstick LED pcb, so I made this design in a morning. Print settings filament: PETG white or clear layer height: 0.15 for translucency Post Processing Initial design has a bridge…
A 3D printable speaker stand for the Edifier R1700(BT) Hifi speakers. The purpose of this speaker stand (as with any speaker stand) is to raise the Hifi speaker from the desk and slightly angle it upwards so the sound wave can pass…
Here is the CAD of the drivetrain that we used during the FIRST Tech Challenge 2022-23 Power Play season. It is a four pod differential swerve drive that utilizes swerve pods that we designed and released here:…
A diffuser to smooth your Sony a6000 pop-up flash! Measured to fit your Sony camera flash, * might* fit in similar models Conscientious Topology design Precisely measured with sufficient clearance for a snug fit Alternative version of the…
Hey Guys! This is a Led channel with a light diffuser, The led strip will slide into the channel, no need for glue! Then, the white diffuser will slide on top of the channel. I've made the files 200mm long and you can print multiple parts…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
I recommend printing PETG, 4 perimeters, 4 upper and lower layers, filling 30-40%
I modified the body of the crossbow so that it is able to shoot 36mm finishing nails. I also added a handle to the main body, and increased the thickness of the crossbow arms. I also added a window so you can see how many shots are left.…
Display model of a differential gear set. No tools needed. Every part is printable. Some print in place elements.
choose the casing that you need, choose the cover that you need. In case of more cover, please let me know and send me the dimensions of you shield Found lots of more case and covers in the remixes .
This is a modular diffuser that you can make as long as you want! The diffuser piece is designed such that its interfaces match so you can print as many pieces as you need and you can then put them together into a single decorative piece.…
How to print : Print with any profile that you have but set the Item Hole Horizontal expasion 0.14mm If not the Hole will not fit with your tool. Summary : Remove 3 Slot of USB and SD card reader Add 3 slot of glue stick, deburring tool…
This is the standard grip for the Hoffman Tactical Super lower 3.1 but with a modifier body to add fuzzy skin to the grip and not the upper parts that mate to the lower. The Prusa Slicer files have settings that I use already built into…
4 different versions of our basic slight modifications of the excellent Prusa headband design, that we are using to print for the NHS in West Scotland. These are optimised for less material and faster printing in recognition of the…
Symfonisk Speaker Modification to Stand-alone Amp This model converts a Symfonisk Speaker into a stand-alone amp that can be used with the Sonos ecosystem. This Amp will output to a woofer and tweeter but could be modified to output to a…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v350 flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with both…
Please leave a like if this was useful, this too a long time to make For use with REV Robotics servos and parts, attaches to Studica linear slides Gears attach to servos and ball bearings Top bevel gear can attach using ball bearing or…
@ThorinOakenshield recently published a Medieval Cannon with realistic looking woodwork and on enquiry informed me that he used Onshape to achieve that. Frustrated I looked for ways to do that in fusion only to discover that it's only…
this has 4 different type of N-Word passes gold 10 x a day and gold infinite smae with silver
Here I share with you my design of a bit holder for any 18V Makita Drill. My design does have a notch so this "thing" sits properly and flush on the battery socket. I also created different sizes to store different amounts of bits. The…
A stable desktop stand for Edifier MR3, which elevates the speakers by 120 mm and angles them 10 degrees upwards. The base shaft is hollow and provides a convenient way to hide your cables. Printing and assembly: I recommend printing the…
Here is the 3d Model I used to print my Rear Diffuser on the back of my 1969 Corvette. You can see the progress on my Youtube channel. https://www.youtube.com/watch?v=1Ixm89CGg68 Leave a comment if you do use it! Measurements may be off,…
This diffuser clips on to the front of your Canon MT-24EX flashheads and provides a large, evenly illuminated 175x120mm rectangular front face (~7x5 inches). The shape of the face has been chosen so that the MT-24EX's natural beam pattern…
This is a slim, low clearance LED strip holder for RGB/neopixel strips WITH the clear Silicone coating. I found a few diffusers that only fit the PCB strips, but were too small for the ribbons with the waterproof Silicone. Works well.…
The protector is printed with PETG and do not need supports. The protector is plugable and work without glue or any other fixation. I have added different .stl files of protectors which should fit to most common thickness of table leaf.…
Here is a mod to showcase the use of the Saturn 2 Riser project . This allows pass though of the InkBird temperature sensor and power for a fermentation belt to be a vat warming system. requires 2 m3 bolts and nuts. The outlet section of…
For holding down the ledstrip use something similar to this wonderfull model. Keep the rotation the same u can print them in batches of 4 as thats how many u need for one side. Step file included. Print Settings : Filament tested : I used…
Designed for 60led/m ws2812b IP30 led strip (250mm section needed) To install, first solder 3 conductor cable to 250mm led strip (15 diodes), then remove top aluminium extrusion, insert the cover with the strip into the slot (its a tight…
LED-Diffuser for 5mm and 3mm Standard LED tight version and normal version
