952 modeli
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
League of legends Midlane insignia modeled as a keychain (Please like and rate, that would help me a lot) Easy to print in one or two colors. You may try to iron the top surface for better quality, I tried but the slicer doesn't program…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Výdejní věž na dlaždice hry Karak upravená tak, aby pasovala do mých insertů. Pojme všechny dlaždice včetně rozšíření Regent. Víko lze zvolit: jednobarevné bez draka jednobarevné s drakem dvobarevné s podbarveným drakem (stáhněte upravený…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Zodiac MX6 pool cleaner swivel assembly broke and the only thing available I can find on amazon is this complete set ( https://amzn.to/446w9Kp ). Luckily, I found the particular part I'm looking for made by BrianM2. I remixed his…
Wydruk około 3,75 €–4,59 € nettoWstępna wycena jednego wariantu
Used the Radiator STL from "RC Spitfire Accessories" unchanged..'remixing' done in the slic3r. Loaded the radiator in to Prusa's Slic3r PE twice. Scaled each one to 216% Clicked 'Arrange' Selected one and rotated it 180° so were facing…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Podlahova lista - vnejsi spojovaci roh Floor sheet outer connecting corner Print instructions Print vertically with support on the bed
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Rozměr 18x16x1.5cm + 2x5.5mm otvor pro montáž.
Wydruk około 3,47 €–4,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Poidełko dla mrówek kompatybilne z próbówkami fi 16mm.
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Miska na pokarm dla mrówek. Posiada uchwyt do wyciągania pęsetą.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The tire bell is operated with the remote trigger on your handle bar. The bell itself is mounted near the tire. When operated it will use the tire to contuesly sound the bell. Unfortunately, the bell wheel broke during a fall. Using the…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
the battery clip on y Ospry Headlamp 600_Lumen broke. instead of sending it off for repair, I was able to print an exact replica. This battery holder clip is a direct replacement for the Osprey Headlamp-600 Lumen. I recommend using PETG…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model wydrukowany na Prusa Mini. Do sklejenia po wydrukowaniu. Dodatkowo należy dorobić stojak (w moim wypadku ze znalezionych w domu fragmentów drewna). W karmniku dodatkowo zaprojektowano dozownik na ziarno, które automatycznie dosypuje…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tento tvar byl objeven v roce 2023 - https://arxiv.org/pdf/2303.10798.pdf Nepravidelná dlaždice pro stavebnici k pokrývání roviny. Aby bylo možné model mnohoúhelníku vytvořit, má tloušťku 2 mm, i když se jedná o rovinné útvary.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
A 2-color keyring featuring the Nerdland logo. More info about Nerdland: https://nerdland.be
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a simple sign made for the fans of a band från Skåne, Sweden. In one of their songs “Rörmockars ola” the lyrics is about how ola gets stuck on the toilett since his dad only put in really tiny pipes. Its all silly but also a…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Tisk ASA Prusament Black JET nozzle 0,6
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Oprava ovládacího tlačítka pro vysunutí a zasunutí držadla cestovního kufru.
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Studenti vytvoří v programu TincerCAD model a v PrůšaSlicer vygenerují .gcode a následně vytisknou.
Wydruk około 5,25 €–6,42 € nettoWstępna wycena jednego wariantu
Studenti vytvoří v programu TincerCAD model a v PrůšaSlicer vygenerují .gcode a následně vytisknou.
Wydruk około 5,25 €–6,42 € nettoWstępna wycena jednego wariantu
prowadnica do szyny zagłębiarki Mafell/Bosch FSN do Frezarki Festool of1400. Należy do wydruku zastosować dwie nakrętki 6mm i dwie śruby 6 mm w celu unieruchomienia prętów prowadnicy.
Wydruk około 6,62 €–8,09 € nettoWstępna wycena jednego wariantu
Upravená krabička pro čidlo.
Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu
Holder for 3Dlack and gas cartridge Printing with PLA Nozzle 0.4HF Core ONE 3 layers 0.2 lines Encouragement will please
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
Předmětem projektu bylo vytvořit modely hracích dlaždic piškvorek, žáci navrhli modely a pak je nechali vytisknout. Dlaždice slouží v tělesné výchově ke hře "Běhací piškvorky".
Wydruk około 4,75 €–5,80 € nettoWstępna wycena jednego wariantu
I liked the model of the Hogwarts castle a lot, but wasn't able to slice it due to net errors. By repairing it with blender I used the chance and added multiple languages for the sign. If you miss your language or I made some mistake…
The collection includes four stylized woodland animals: fox, deer, bear and rabbit . Each model has a simple vertical silhouette, soft sculpted details, subtle carved body lines and a delicate textured surface, giving the figures a calm,…
Remix des Modells "Skadis 3D Lac" von noxx.
I modified the 400 series latch file to match the 450 series. Printed on Ender 3v2 with brim and support touching buildplate, overhang angle 59°. Layer height 0.16mm and infill 100%. I set the supports touching the print and removed it…
The lamp is mostly 3D printed, and is easy to assemble. It uses an array of WS2812B individual addressable RGB LEDs, which gives it the ability to not only show every color, but also in different effects, like simulating a fire. All of…
Cute woodland desk organizer: a tree stump with a squirrel - pencil holder. Supports are required. I printed it with Fuzzy Skin. The model is to scale it up or down. Powered by Image-to-3D from MakerWorld
A series of cute woodland animals.
None of the saw guides I found on printables had a proper clamping feature, so I added my version which has 2 cutouts fit for small screw slamps. I use Bessey 100x50 clamps. Suitable for 1mm thickness saw blades (slots are 1.2mm wide)…
I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…
Holder/s for WD40, 3DLac and other sprays. Inner diameter optimized for 65 or 53 mm sprays. 3mf and bgcode for 1 or 3 pieces. Any number of pieces can be made. It is also possible to achieve a different diameter by adjusting the scale.…
Delicate and serene, the Woodland Fairy glides through the forest with the elegance of a breeze and the quiet strength of ancient magic. With her butterfly-like wings, flowing dress, and flower crown, she brings a touch of wonder to any…
Cute woodland desk organizer: a tree stump with a hedgehog - pencil holder. Supports are required. I printed it with Fuzzy Skin. The model is to scale it up or down. Powered by Image-to-3D from MakerWorld
This printer profile is perfect for LW PLA and the planes from 3DLabprint, Planeprint, ... This is a PrusaSlicer profile, which can be used with the BambuLab X1C, because the BambuLab slicer partly does not recognize internal structures…
This 3D printable figure brings to life Elara, the Woodland Rogue , a dark elf assassin with sharp features, long flowing hair, and pointed ears. Dressed in a stylish fantasy outfit, she holds a dagger ready to strike, embodying both…
Crafted to resemble natural tree trunks with mossy accents, this functional woodland-inspired piece is both practical and decorative. Perfect for holding pens, pencils, paintbrushes, or even makeup brushes, it transforms everyday…
These covers are always get stolen. So instead of buing new ones, i decided to create, and print them. For best results print upright (like the models) if no the barkets will be to fragile. Print Settings Printer: GeeeTech I3 pro B Rafts:…
This semi-realistic black bear statue blends cute character proportions with realistic fur texture and anatomy, making it perfect for a 3D-printed display piece. The model is designed to translate cleanly using the MakerWorld Image-to-3D…
Meet Hedgehog's Cozy Autumn Haven , your charming companion for knitting and crochet! This adorable organizer holds your knitting needles and crochet hooks in its quills. It features a detachable yarn holder (spool) for smooth unwinding,…
Radlands game box with removable insert. The inserter fits wrapped cards. 6 pcs M3x30 screws are needed for assembly
Hook for attaching the strap of a headlamp (such as a Petzl headlamp) or goggles to the Opscore ARC rail of a tactical helmet. Attach one hook on each side of the helmet ARC rail with the hook facing forward, then adjust the strap length…
Podlahové lišty - vnější a vnitní roh, P+L koncovka. Pro klasické podlahové lišty z Bauhausu. Baseboards - outer and inner corner, P+L end cap. For classic Bauhaus baseboards. Sockelleisten - äußere und innere Ecke, P+L-Endkappe. Für…
Replacement bracket for folks flashlight. Print details: Number of walls 3 (for strength), layer height 0.2 mm, filling 25%, no supports.
Krásná Andělská křídla Beautiful Angel Wings
I was needing a mount to hold a headlamp on my hardhat, but the original version had a painfully thin 1-2 layer thickness for the headlamp holder that I didn't think would last. I increased the thickness, while still maintaining the…
That can is soo tall it always ends up falling when it's on my bench next to my Prusa printer. She needed his own place. - Design in Thinkercad. -Printed in PLA+ - 0.4MM
Created this replacement headlamp dust cap for a Kia Cee'd 2006. Should also fit in these models: Sportage 2010 Sorento 2006 Carens 2006 Sedona 2006 Seele 2012
Replacement headlight covers… Print it out, insert the original seal and snap it onto the headlight.
Did you try to replace your lightbulb in your shiny i30 and find out that you can't get a good grip to unlock the lightbulb? Introducing the i30 Headlamp remover! The headlamp remover allows to get a better grip to the headlamp assembly…
Now you can print the block and valve covers in different colors of the 3DLabPrint Piper J-3 Cub for a more detailed look.
Headlamp dust cap replacement for my car. Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Colorfabb PETG/nGen Notes: Print with full support. Post-Printing ============= Carefully clean up all the support…
Upgrade your RC plane, Piper Cub or other Bush plane with grass wheels for faster landings! This upgraded tire is 65mm wide and uses the same wheel disc as the standard (original) Piper Cub wheels. > Print with 0,4mm, 0,5mm or 0,6mm…
My first miniature I've modeled. If you print him, leave a comment/make so I can see how it turned out! Enjoy my work? Find my full collection over on Patreon or By Buying Me a Coffee
Remixed this can holder for the HSW because it didnt fit my 400ml and long spray can. modeled after 3D lac
Update 3/2/2021: Modified grip, seems to hold better now. Considering this 'complete' Replacement bracket for Milwaukee 2111-21 Headlamp (and similar), service part 42-36-0215 . This is not 100% accurate, I had to guess some dimensions of…
This a 3mm LED holder for the headlamps in rambros ' excellent EMD F7 model for Dragon Railway . The original headlamp lenses still fit in front. It snaps in and is pretty tight but I glued it in anyway.
Full 3D printed Street Fighter-style motorcycle headlamp, Inspired by Ducati Headlamp. Using Devil Eye Animated LED and Mini projector lamp. I print it using ABS filament but u can use other material that can survive in the hot…
A remix of printables user Swesen's Nintendo Switch Dock Wall Mount. I changed the design a bit so it uses less material and lower printing time. When I design or remix, I try to minimize material cost and printing time while keeping it…
I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better…
This is a part of our Grimworld: Battle for Underholme project! Join the fight on the side of one of the mighty dwarf armies. More information on our website - sign up to get 2 additional models! Subscribe to the pre-launch page on…
Water tokens based on dimensions of the original ones.
A cozy woodland cottage sculpted from a towering pinecone! An arched front door, tiny shuttered windows with a little shingle awning, a miniature fir tree, and a stone path sit on a tidy circular base. Perfect for fairy-garden dioramas,…
Headlamp band holder for MSA V-Guard 500 hard hat.
Description Custom modelled splint (fixture) for broken thumb. Fixes the last phalanx and knuckle, while doesnt restrict its movement in the big knuckle near Your palm. There are two models - normal and one called “wider” for bigger…
🌿✨ Woodland Fairy Tower ✨🌿 Step into an enchanted forest with this whimsical Woodland Fairy Tower , a tall and magical treehouse sculpted straight from a fairy tale! Few supports are needed. I used organic-style supports, which peeled off…
I redesigned the motor support of the 3DLabPrint Piper J-3 CUB already equipped with the hole to pass the power cables. I recommend printing it in ASA, ABS or even PETG so it can handle the heat generated by the brushless motor.
This is a replacement part for the Skilhunt HB3 headband that typically comes with the H04, H150, H200, and H300 headlamps from Skilhunt / ESKTE. This part should work with the other Skilhunt headlamp adapters you may find on Printables,…
The headlamp mount for the Wurkkos HD15 flashlight. With this mount, it is much faster and more convenient to mount the lantern on it. It is attached with a click and holds securely. The ribs on the mount do not allow the lamp to move. It…
UPDATE: Why Gen2? My first remix of the Squirrel Chess set made use of a tree trunk which was not licensed for derivatives. I have therefore removed those files. Gen2 replaces the “no derivatives” trunk with one from the public domain.…
one clip/holder for construction helmet suporting headlamp stop using cable tie and stop recharging the helmet on the nightstand! Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.4…
My Black Diamond headlamp had a bracket with two fingers that let the tilt adjustment click into place. The fingers broke off and the light would flop down. I used scotch tape to hold the angle for a couple years. Then I printed a TPU…
It's best to print in PET or ASA for strength, but my first print was in PLA and worked for initial testing just fine. Put on a backpack strap, molle, or even a belt loop. You might also enjoy: Skilhunt Flashlight Magnetic Charging Stand…
Print on side with snug supports enabled
🐉 Unleash the power of the Elemental Dragon Bust Series! Each bust captures the essence of a mighty dragon, sculpted with intricate details and infused with the spirit of its element. Whether forged in fire, carved from stone, born of…
Replacement headlight covers… Model created by redrawing a 3D scan of the original cap Print it out, insert 6x hot nut M3x5x5 + 6x M3x8 screw and insert the original seal and snap it onto the headlight.
Woodland Fairy House – Fantasy Cottage Bring a touch of magic to your prints with this cozy Woodland Fairy House , nestled in a whimsical log cabin carved from a forest stump! Some supports are needed. I used organic-style supports, which…
Needed a better more true spinning spinner for my 3dLabPrint 48" Edge 540. This one has prop access when mounted. Snug, centering hub fit for Eflite EFL01893 3 Blade 11x6 Propeller. Uses M3 Heatset inserts with M3x20mm screws. The tip…
This is a custom helmet mount designed for the EJEAS V6 Pro+ intercom, inspired by the sleek and practical Midland BTX1 Pro adhesive mount. Unlike a flat mount, this version features a slightly curved and flexible base, allowing it to…
The test stand that I designed for myself in order to test 18650 cells more efficiently, I used Litokala Li 500 chargers / testers for the project, the test stands are pulled out of the charger to eliminate incorrect temperature…
This is a themed version of hextraction . Zack Freedman created a fun and interesting game, but visually it didn't resonate with us. So, we picked a new theme, modelled a new endzone, painted stls in the slicer and printed it. The chosen…
paving under buildings, divided into 4 pieces for smaller printers
This is an alternative model of engine cylinder for an RC airplane WACO YMF – 5. The original model was created by 3Dlabprint and is available on their website https://3dlabprint.com/shop/wacoymf5/. This model doesn't have as much…
Fix if you broke this strap holder part. 10 minute print on standart settings on bamboo P1P
I needed a way to keep my headlamp from sliding off my hardhat.
Reverse engineered headlamp case for Honda CB50 Built from scratch in Fusion 360 for an accurate fit ; No 3D scan Surfacing is an approximate reconstruction of the original, not 100% accurate but fairly close Replacement for Honda nr…
This woodland rabbit statue offers a gentle, friendly design perfect for decorative 3D prints. The proportions are slightly stylized while retaining realistic body structure for a natural look. Built using MakerWorld Image-to-3D (…
Tento model je navrhnutý ako priama náhrada za stratenú alebo poškodenú originálnu zátku LPG tankovania. Zátka tesne prilieha a chráni vnútro hrdla pred prachom, vodou a blatom, čo predlžuje životnosť tesnení a ventilu. Technické…
Dávkovač na mydlo Print instructions: printed in PET-G with 0.4mm nozzle
5020 FAN https://pl.aliexpress.com/item/1005005075120773.html Enclosure for Sidewinder X4 Plus S1 – designed for mounting a 5020 turbo fan from AliExpress, which is quieter than the original fan. A side-mounted 3010 fan can also be…
Good luck printing this
The original part is known to fail, causing the headlamps to rock back and forth horizontally while being unable to adjust it anymore. This will almost certainly cause the vehicle to not pass inspection. I've modelled this part based on…
Najdete zde modely rovných svodidel pro silniční provoz na modelové kolejiště.
A cutout bookmark with a popular quote from booktok and others who reads smut/cliterature.
![Ersatzrad für Radlaufglocke [Tire Bell] [Wheel Bell] [Bike Tire Bell]](https://media.printables.com/media/prints/608596/images/4836337_a604b494-e644-4a51-ba10-ca7f7cbdc252_e3ba0537-0a8c-40c9-b827-74e886c865f0/replacement-wheel.png)
